Classic won't play videos - not supported. Played fine before!!!

I haven't updated my ipod in a while. I wanted to add a few songs so I updated it. I had tons of videos on it that have been playing since I got it. It erased all my videos and now is telling me it can't put them back on because my ipod doesn't support them. What's up with that? How do I get my videos back on my ipod.

They should though. That suggests that something went wrong with the upgrade because I'm running the latest version of iTunes and don't have any problems syncing videos to my iPod Classic.
Either way, glad to hear it is at least working again for you.
B-rock

Similar Messages

I have an apple hdmi adapter i am trying to use it with iphone4 it keeps saying cannot play video not supported??t

help i have an apple hdmi adapter trying to use it with my iphone4 when i plug it in and go to netflix it plays for a second then says cannot play video not supported???? please help im so frustrated!!!

Success!! There truly is a light at the end of the tunnel. Apple support really did come through and I am successfully back into my account. Ready to purchase more music. I followed the instructions, with patience I thought I lost, submitted my problem, someone emailed me back within two days and all is now perfect. Thanks again Apple.
To all the frustrated users out there, don't lose hope!!!

5th Gen iPod Classic won't play video

I've been having a problem getting my 5th gen. iPod to play video podcasts. I'm using iTunes 9.2.1 and os 10.6.4. For about a month or so now my iPod will play a couple videos and then it just stops playing them. It usually finishes playing but then goes to black screen before the next video starts. If I click the pause button the battery indicator shows up at the top and three podcast titles quickly display and then disappear, and then the screen returns to the menu. From that point it won't play any video podcasts; until I resync the iPod then it will play three of four video and quit again until it's resync'd. Even after it stops playing videos it will still play audio podcasts without interruption.
I've tried restoring my iPod, but I get the same behavior after the restore.

I have an 80 classic and i started getting new movies and tv shows and my ipod stoped playing movie files. The time i experienced this was May 22, 2009. I loaded the free episode of the Glee Club offered by itunes. Did you ever find out how to fix that. Someone PLEASE HELP!!!!!!!!!

IPod classic - won't play video podcasts

Hi Community!
I have a shiny new iPod classic 160GB, and I love it ... except for the fact that I can't play video podcasts with it.
They play fine on iTunes, and my audio podcasts work great, but no video podcasts.
When I click on one, the screen goes black for a few seconds, then goes back to the menu.
Please help me!
Thanks!

Hi, I have the same problem, but videos i converted to mp4 under the iPod specs..
I transferred some and all played OK... decided to transfer more vids and now those freshly videos don't play
They transfer to my iPod classic, i.e no error message.
Then i browse my ipod try to watch a movie and the same thing as you, black screen and then the menu slides back into place as i have not watched it
I tried reset center +MENU, tried restoring ipod, now i tried "Create an iPod or iPhone version" and i got this warning
"One or more videos were not converted because they're on the right format" so the format or encoding is not the problem with my videos
I will reinstall itunes if that doesn't work i will defrga my hard drive if no then a itunes repiar... i hope something works

My 80GB classic won't play any songs!

I got the classic several days ago and have about 1000 songs on it and counting of which are from many different sources: albums, music purchased online from itunes, and a couple of burned cds...
Now, the problem came very gradually; at first (and i believe it first happened when I was playing an "On the Go" playlist in my car whilst driving via a Philips tape cassette mp3 converter) my iPod decided to stop playing songs after only going through about 1/5 of the playlist (maybe 6 songs) and went to the beginning mark - "0:00" of the song played just before the one it had last played before stopping. After about 24 hours of using my iPod quite often after the incident, it has now ceased to play any songs, no matter what i choose. (It sits at the "0:00" mark of the song - and videos btw - and if i try to scroll to the middle of the song or video, it sits at that mark i scroll to, but still reads "0:00".
I am really bummed out as i cannot find any helpful suggestions on this site - and i have looked most everywhere. Please, any slightest bit of knowledge bestowed upon me concerning this problem or anything similar would be greatly appreciated.
thanks in advance.

Also having this problem with a few of my songs. Is there a solution?

FLV supporting but .mp4 (H.264 encoded) video not supporting in mobile browser?

Hi
I want to know one things, is there any other settings required to publish the swf file for playing mp4 file in mobile browser also. I am able to play ".FLV" in mobile browser but not able to play ".MP4" (H.264 encoded) in my mobile browser.
MP4 file required Flash Player 10 to play video I know this,I can watch video from youtube.com in mobile bowser also.
Please look at the following url which is not opening in Mobile browser but can open in computer broswer.
http://karzzzz.bigflix.com/m/
I want the above url to be play in both computer and mobile browser also as it calling .mp4 file from Flash Media Server.
Thanks
Sunil Kumar Sah

Are you using Flash Lite Plug-in or Flash Player Plug-in on your mobile browser. I have a feeling that you are using Flash Lite Plug-in and flash lite plug-in (latest is 4.0 i suppose) does not support H264 encoded files.
MP4 file which you are playing from youtube might not be H264 encoded , it might be On2 VP6 which is supported in MP4 container.

Can't import mpeg video - not supported

Production Premium user.
The whole purpose of multitracking against video is useless as I've just found out Audition does not support MPEG MPEG-2.
I went to the Apple site where I was led to believe that buying the
QuickTime MPEG-2 Playback Component for Windows
would give me a fix to the QuickTime component - nope - just wasted £15 on an add-on that doesn't work. The player opens and plays as if it were reading the file but no video (black) - and no audio. Apple, please can I have my £15 back?
Anyone else really hacked off with this, especially having sat watching a "Senior Evangelist" gush about how great Audition is for Multitacking against video.

Hey Steve, thanks for your reply, but not to leave you out...
Your comment "...because I don't do video..."
Now here's me thinking that Production Premium with Prem Pro and AE etc was geared toward video editors and video producers like me... So the inclusion of an application like Audition is aimed at a wider market. Hey Ho... Rather like Canon finding that their DSLRs could do HDV video (but not very well) but had other USPs.
Report Back:
<File> <Sequence... Right Click Edit Adobe Audition...Sequence> <Export without or with Preview Video>
Defaults to AVI... AVI if left up to its own render is rubbish - pixilated and low def - especially when you're used to working in HDV. And just try undocking the video panel to a 32-inch plasma - oh no...
Reformatting to H.264 and importing H.264 it just can't handle cross application satisfactorily. Stutter playback - in Audition - and outside using an undocked panel.
I operate i7 hex intel 970 24GB tri channel RAM and 5 drive HDD with SSD OS on Windows 7.
This is just not an application which can claim Multitrack mixing to video sync - okay perhaps in the DV and those early days but not now. Rather reminds me of old high-end audio console digital software - always maintained its not the the software but the user. It rather looks like you development guys just didn't think this was important - well not in the short-term.
Not good enough for my needs. Steve - I don't know what you use Audition for but it's not professsional video applications - as you state. But thank you for replying.
6/10, and only for the fact it tried but fell over.
Edit: Forgot to add I'm also running Nvidia GTX580 1.5GB Video Card.

DLNA with TV LED 46VL748 - Video not supported ?

Hi,
Have you experienced problems with the DLNA functionality of TV LED 46VL748 ?
This utility works well with Photos and Music but does not support any SD Video like simple AVI or MP4 (tested with DivX3, DivX6 and AVC)
I have a NAS (QNAP TS-439) with UPNP Twonkymedia server running and Videos are playing well with other UPNP client like my iPhone (with Twonky Mobile) or my PC.
I have the latest firmware already installed on my TV.
Any help would be greatly appreciated.
Thanks,
Phil

Hi
Users manuals - http://www.toshiba-om.net/LCD/PDF/English/VL748-4046-English.pdf
If you check users manuals on page 52 you will find a list of all supported formats for DLNA playback.
As I can see mp4 is listed there but there is also remark that some files may not be played.
What does it mean exactly?
Because of the huge encoding on format options, which exist in the market, TOSHIBA cannot guarantee, that each file-type mentioned in the list, will also work in practice.
What you can try is to transfer your files into other supported format listed in manuals and test the functionality again.
Firmware upgrade will not help much. Decoder chips used in TVs are embedded and limited to its specification. Fact is that these decoder chipsets cannot be upgraded afterwards.
Please try to change files format and test it again. It would be nice if you can send some feedback.

Ipod classic won't sync video files

I have .mov and .m4v and .mp4 video files that used to work perfectly with my ipod but now I get the message that "x wasn't synced with your ipod because it was not compatible" Extremely annoying. I have checked teh bit rates etc and they are al withing what the spec says the ipod will play. Indeed I have older files of the same type that it plays fine but not these newer ones.
Help

Are these videos from the iTunes store or imported from outside of iTunes? If they were imported from outside of iTunes try using the iTunes built in converter to try and convert the videos to an even friendlier iPod format. To do this, highlight the video and choose Create iPod or iPhone version from the Advanced drop down menu.
More troubleshooting can be found here.
http://support.apple.com/kb/ts1497
B-rock

Video Not Supported

I have a 2TB NAS drive with over 300 hundred movies on. Sometimes when I try to watch a movie with ATV I get the message on the screen that the video format is not supported (when its fine they are all m4v) I go to itunes and see an ! next to the movie, so I click on this and the movie starts in itunes, go back to the ATV and re-start the move and hey presto...it works.
Does anyone know of a solution for this problem?

Me three. Also, for the past several months, my Apple TV randomly gets disconnected from iTunes at least once a day. It really cuts into the convenience factor when I have a 3-year-old daughter wanting to see a certain movie. Suddenly DVDs don't look so bad when, in order to get the Apple TV working properly, I have to go over to another room, switch users on the iMac to the one that has the library of iTunes flicks, quit iTunes and restart iTunes to get it to reconnect with the Apple TV. Several months ago, it never had this problem. Anyone else dealing with this?

Youtube Video Not Supported On The Ipod Touch

Hey recentley I have posted 3 videos on youtube and I tried watching them by using the YouTube app that I have on my ipod touch, but two of them say that its not supported on the ipod touch wich is 2nd generation! Why is that? Can somebody please help me!!!

As far as I can tell there's no way to do it... however, you can click on the mail icon, it'll create a new message with the full title as the subject line. From there you can cancel and go back to the video.

Error 0xBFF60492 on IMAQ USB snap.vi RT Video not support displaying selected color depth

Attempting to snap a picture with NI-IMAQ for USB in LabVIEW 8.0 using the following procedure.
1)I get the first enumerated camera, 2) open a session, with returned
string [0], 3) start a session, 4) snap a picture and 5) close
vi. My problem is that in step 4 with the IMAQ USB Snap.vi, I get
the following error.
Error -1074396014 occurred at IMAQ USB snap.vi
The image passed is not valid.
Possible Reasons(s):
IMAQ Vision: (Hex 0xBFF60492) RT Video Out does not support displaying the supplied image type at the selected color depth.
I give the snap.vi an Image in from rightclick->Create->Control
or rightclick->Create->Constant. The output image (on the
Front Panel) created by rightclick->Create->Indicator.
LabVIEW should insert the correct data structure to match the expected
input/output, and there is nothing I can that changes he color
depth. The GetImageInfo.vi reports that the camera is set up for
4 Bytes Per Pixel, with the rectangle 352x288.
Also the error message refers to RT Video Out, but I am using USB. This distinction is significant in NI Vision Assistant.

Hello together,
I wanted to use a Sanyo Xacti CG 10 video camara in LabView.
By using the NI-IMAQ for USB Snap I get the following error: IMAQ Vision: (Hex 0xBFF60492) Ungültige Blit-Funktion des Videoausgangs.
Is it possible, that I can not use this camera in LabView?
Thanks a lot for your reply

C2-03 video not supported

Not supported for watch video on youtube
Solved!
Go to Solution.

and about other problems,i'm using nokia handsets from last 8 years i used n73,1110,2600,6030,7210 i never used other branded mobile s from my first mobile to my latest mobile,but after using c2-03 i decided that i never use nokia mobiles in my life again,what **bleep** it is,c2-03 is a foolish device,nokia makes people fools by selling this kind of buggy handsets,it has all kinds of bugs like memory bug still not solved 100%,bluetooth problem,touch screen problem,auto start,freezing problem,sim1 inserted problem,apps becomes corrupted,conflicted apps,when try to open some apps phone freezes and restarts same app work fine on other mobile it even doesn't have some basic features like organising menu item till last update it doesn't have personal config, it doesn't have streaming support also ,a third class china mobile is better than this,my handset is already an exchanged one, when i contacted nokia care with ''sim1 removed'' ''sim1 inserted'' problem,without removing and without inserting the above msg appears in my old c2-03 that too ''sim1''inserted,how can we insert or remove sim1 without switching off, they exchanged my old c2-03 with a new one but even the new one also bugs like bluetooth problem,when i click on personal config phone freezes and auto restarts and sometimes even the same old problem 'sim inserted' appears without removing and without inserting sims even in new mobile also how many times will i go to nokia care,is it my office to go everyday with a new bug, why are you people at nokia eating my time, soon i will file a complaint on nokia in consumer court ...

HT2188 Iphone won't charge, charging not supported with this accessory

I havent updated my phone to the latest software yet, so need to do it, this may help the issue of it not charging, i dont think the battery is dead because it was working but saying CHARGING IS NOT SUPPORTED WITH THIS ACCESSORY even when i tried the mains charger, car charger and from a pc however I cant do this because my phones battery has now died...anyone help ?

Use the original cable and charger that came with your iPhone, and plug it into a wall socket for several hours.

Help! ipod classic won't restore but hard drive is fine

Hello,
i have kept an ipod classic for several years, my first one an 80 GB and i had that working wonderfully for 3 years and then the hard drive failed and so my dad got me a new 160 GB off of e-bay, slightly used but it said the hard drive was checked out and everything was good to go. When i got it i looked at the number of Reallocs and Pending Sectors and the hard drive shoulod be just fine, but when i tried syncing it the first time everything looked good, it said welcome to your new ipod and all of that, i restored it and it said that it restored successfully, so i syncedall my 40 GB of data including videos, audiobooks, podcasts, games and music and it showed every little thing loading individually like it used to with my old one, and then when i ejected it and disconnected it then looked at the ipod itself it said no music, no videos, no audiobooks, nothing showed up!! I went to setting and looked at the about and it showed 40 GB gone, but when i looked into that it showed up as other. so i tried it all again, restoring and re-synching and all of that, and it would give me a variety of different error messages listed below:
could not copy to ADMIN'S IPOD the selected disc is not available
synching to ipod failed an unknown error occured (-59)
synching to ipod failed an unknown error occured (-60)
cannot synch to ipod, no drive is selected
cannot sync to ipod, selected disc does not exist
cannot sync to ipod selected drive is currently in use
connect to power (even while fully charged)
and then i tried formatting with my computer and "scanning and fixing problems" with my computer documents
didnt work
re-did diagnostic test
shows drive is fine
tried synching one playlist and one season of my videos
worked! played everything fine!
tried synching more
showed no music, no videos
the problem comes only when i try to sync everything, or more of something
and now it wont even restore or do anything! it shows the same error my old one did error 1493 ipod cannot restore unknown error occured
i dont know what to do. my dad insists the hard drive is fine because it played the videos just fine before and the music as well and my cover flow showed up
but now i cant even get it to the point where i have an option to put music on it at all.
i thought i erased all of the old software that came with it when i restored and repaired the first time, not to mention the other times i've tried.
please help me!! i dont know what to do anymore i think i have tried everything
rikkitiger

The iPod's hard drive seems to be unreliable. The used iPod from eBay may need to be returned.
You can try putting the iPod into Disk Mode
http://support.apple.com/kb/ht1363
If it goes into Disk Mode, run iTunes and connect the iPod. iTunes may then prompt you to do a Restore.
If that does not work, but the iPod is recognized by Windows, you can try using Windows to reformat the iPod, like it's a USB external drive. Use FAT (FAT32) as the format type. If you have the option to do a "quick" format, choose to do a FULL format. If you are able to complete this procedure, run iTunes, connect the iPod, and do a Restore. Even if iTunes does not prompt you to do a Restore, it is important that you do a Restore, because after Windows reformats the iPod's hard drive, it does not have any of its onboard software. The Restore is needed to reinstall its software.

Classic won't play videos - not supported. Played fine before!!!

Similar Messages

Maybe you are looking for