Classification and release

Dear all,
I am wondering if my release strategy class is flagged as incomplete status (i.e. 3 with icon "X" sign), does it means when a PO document is triggered with PO field values that meet this class characteristic values, the PO release strategy will not be activated (i.e. triggered) from this characteristic of this release strategy?
THanks
MM_user.

Hi Guys,
Maybe I am still not very clear on your reply... but my question is
I am wondering if my release strategy class is flagged as incomplete status (i.e. 3 with icon "X" sign), does it means when a PO document is triggered with PO field values which meet this class characteristic values, the PO release strategy WILL NOT BE activated (i.e. triggered) from this characteristic of this release strategy because IT HAS A SIGN OF INCOMPLETE??
thanks
Karen

Similar Messages

Transport of Number range and release proceure and split valuation

Dear Gurus,
Can we transport number ranges from PRD server to Quality Server?
Also, how will we trasport split valuation and release procedure?
Kindly suggest..

Hi
Number ranges you have to create directly as it is not transportable.
For release Strategy details, all your Release config details are transported Except for the below details
1. Characteristics & values assigned to it ( master data)
2. Class & assigned characteristics to it (master data)
3. Values/ranges inside the Release strategies ( classification details).
These three details are to be recreated/assigned in the client you intend to work upon.
Regards
SAM

Material classification and batch management

Hello all,
we have to urgently incorporate a subcontracting process at a semiconductor manufacturing client. They also want to incorporate batch management for 541 and 543 movements. I understand that classification will have to be maintained for the materials first and also related configuration for batch management for movement types.
Can anyone point me to the sequence of steps necessary to make this possible.
Many thanks
satya

u need not worry about charc. in release strategy as btch char. and release strategy cchar,. are completly 2 diffrent things
and yes u must make use of class type 023
and the tcode for generating the condition record for the batch management is MBC1 (u must create a reord if u want that ur batch strategy should work properly)

Transport of Release Prerequisites and Release Indicators

How the release prerequisites and release indicators in the Release strategy get transported.When we were trying to transport only strategies are getting transported.

Hi
Number ranges you have to create directly as it is not transportable.
For release Strategy details, all your Release config details are transported Except for the below details
1. Characteristics & values assigned to it ( master data)
2. Class & assigned characteristics to it (master data)
3. Values/ranges inside the Release strategies ( classification details).
These three details are to be recreated/assigned in the client you intend to work upon.
Regards
SAM

Difference between PR Relase with classification and Without classification

Hi,
Can any one tell me what is the difference between PR release with and without classification
Thanks
Akkshaya

For PR with release strategy without classification only item level release is possible. But for PR with release strategwithat classification overall release is possible.
Below links will give you the complete details
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Both cannot be used together. Only one at a time can be used
Regards,
Ashwin

Purchase order Revision and Releases

Hello All
Can any one tell me the keyfig for Purchase order Revisions and Releases.I am trying to built a report that has PO Revision count and PO Releases count.
Any help would be appreciated
Thanks

Hi,
PO release is a approval procedure. If a PO fulfills certain conditions (e.g. the total order value exceeds $10,000), it has to be approved (by the cost center manager, for instance) before it can be processed further. This process of approving is knows as release procedure.
PO revision refers to changes made to PO. If an existing PO is changed, the system can print an amended PO displaying the changes. The first change is printed as 'amendment no. 1", the second as 'amendment no. 2" and so on.
Hope this helps.

Release date and release no of Scheduling Agreement

Hi All,
I have a problem with Scheduling agreement.
I have created a scheduling agreement with long validity period.
I maintained delivery schedules within that validity period.
I have generated forecast schedules. then using ME84, creating a releases.
the problem is occurs here.
it was not updating the release no and release date for the schedule line.
still it is showing a *yellow light* .
where is the problem and why it was not updating.
and can u please explain the process and significance of those lights.
Thanks in Advance.
Regards
Kishore

Verify the table T161M has the values
kvewe = 'B'
kappl = 'EL'
druvo = 1
kschl = LHPA
as mentioned in the code.
The solution is add in SPAD the

How do I use Firefox sync on my Android device with both Aurora and Release?

I have both Aurora and Release installed on my Android phone. I have set up a New Sync account on my desktop. I can log in to it with Release, and it syncs great.
However, my Aurora build keeps popping a "could not sign in" notification. If I touch the notification, it takes me to sync settings. I try to log in (same username and password), but it says "Could not sign in".
if I look in my Android settings, I have two "accounts" - one for Release and one for Aurora - and _both_ claim that they most recently synced 5 minutes ago! But I made an update to my bookmarks on desktop 10 minutes ago, and it's appeared in Release but not in Aurora. So the Aurora "last sync time" seems to be a lie.
The reason I'm on SUMO is that I don't know if this is a supported configuration. I remember with old sync there were some rules about whether you could have multiple copies of Firefox on the same device. Is this a supported configuration? If so, should I file a bug or have I missed something here?
Gerv

HI Snickers,
There is an option to sync tabs. About:sync-tabs works on the desktop and can see the tabs from that device however this feature is not available for the mobile device. However from an active sync the current sessions are visible from the desktop page.
In order to restore a session you may be able to restore the session if it crashed. [https://support.mozilla.org/en-US/questions/1026370#answer-644109 With these instructions]

Contract and release order for service: connection and field selection

Hi Experts,
I have some questions about contract and release order (PO against contarct) for services.
A -I want ot know if there is any standar way to oblige the creation of a release order to a contract. I mean i had some users that create a release order w/o reference to the contract and it works fine anyway. The document is a copy of the NB. I cant find the way to reference the 2 purchase document clearly.
B - Using a release order, when copying the item from contract catalogue by clicking the service selection icon, description and net price are correctly copied: the description is not modifiable but the net price can be change by the user. Can some body explain me where to modify this setting? where is the field selection and where in SPRO step by step please,
thanks in advance
Livio

... Nobody is so nice to suggest me any solution?
For the point A probably the only way is user-exit.... but for B i don't have any idea, please let me know
thanks
Livio

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Purchase and release order not allowed for TECO work orders

Hi
We are typically setting maintenance work orders to TECO once the physical work as been performed as that sets the reference date for showing the history of when the maintenance was performed, and when the maintenance call was completed. However, we have invoices that may come in significantly later than when the physical work was performed.
Once the order is in TECO a purchase or release order (for services against a contract) cannot be created for the work order. Additionally it appears that even if we have a release order,or purchase order, if it is not for the exact amount of the invoice the release or purchase order cannot be ammended - we get the sameerror mssage (BS007) as when creating a new purchase order for the TECO order.
I had wondered about using BS22 to change TECO to continue to allow purchase and release orders when the order is in TECO status.
Any input on pros/cons or other approachs appreciated.
Philip

Thanks
That was what I initially thought. However I was informed that if the invoice is not for the originally determined amount that to post the invoice means having to change the PO, and changing the PO appears to hit the same business transaction as creating a PO, and so we get the error mssage.
The issue is that we may know we need to have services estimated at, say, $5.000. But we do not know what the actual final invoice will be. So the actual amount may end up being $4,500 or $5,500 as an example, and it may come ni late from the vendor. The Purchse Order side is not my expertize, but I am being informed that the invoice must match the PO amount, otherwise the PO must be ammended to match. As the order is in TECO, the user cannot amend the PO.
I would be happy to know of other options, or at least good questions to ask. I want the end user to be able to post the invoice against the PO, after the order is in TECO, even it the invoice amount is not exactly the same as what was originally anticipated.
regards
Philip

How to close an open PO of partial GR and release procedure

Hi friends,
I would like to know how to close an open PO where partial GR has done on it and release procedure exists for that particular PO.
I would also like to know if Invoice is not done for a PO and GR is done, then can we call it as open PO?
Please clarify
Thanks
Jyothi

hi antony..
thank u antony a lot...i ve tried it and working fine..
but can we go in me22n to tick delivery complete for a PO which has already been released? it is showing "u cannot make change because it has already been output
regards,
jyothi

CK24 - mark and release with different costing version

Hi,
We are currently using standard costing variant PPC1 and costing version 1 to mark and release the standard costs. However when we try to recost the material cost due to price changes, system does not allow to mark & release revised standard cost if we try to mark & release on same day. pls note standard cost estimate is already released for the month. And we do not want to delete existing standard cost estimate. Instead we want to explore other options. We are using 4.7.
My questions are :
a) Can recost using costing version 2? CK11N allows to save the costing result. However in CK24 Marking allowance, system does not allow to change Costing Version. is there any config option to change this.
b) If we cannot use different cost version, can we update material cost with same costing variant (PPC1) and costing version (1) in this case. However when we tried to do recost with same costing variant & verison on same day, system gives an error 'Material AAAA in plant MMM has a released cost estimate.'
Any inputs on above issue highly appreciated.
thanks
Sunil

Hi,
While, you can use any of the Costing versions to mark & release Standard cost estimate, you can release Cost estimate only once in a fiscal period. If you want to release correct prices, then you have delete existing released cost estimates using CKR1 transaction and then re-run CK40N to release.
Hope this helps.

Toolbar is missing. Clicking Alt and releasing has no effect. Help !

The toolbar - File View etc is missing. Tried alt and release, NBG, tried switching laptop (an Acer) on and off, ditton

'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) , see: 
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
* Press F10, Menu bar will appear, click View, click Toolbars, click Menu bar
* Press ALT, the Menu bar will appear, click View, click Toolbars, click Menu bar 
* Hold down the ALT button while pressing V+T+M
'''Navigation Toolbar''' (Back/forward, Refresh...Home, URL/Location Bar, Search Bar): Do one of the following
#click View > Toolbars, click on "Navigation Toolbar" to place a check mark, OR#right-click the Menu Bar, click "Navigation Toolbar" to place a check mark. See: 
#*https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing
#*http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
#*http://kb.mozillazine.org/Toolbar_customization
#*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
#*http://support.mozilla.com/en-US/kb/Navigation+Toolbar+items
'''Bookmarks Toolbar''': Same procedure as Navigation Bar except click "Bookmarks Toolbar". 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Shockwave Flash 10.0 r42
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from one of the links below; '''the links take you directly to the download and you avoid the "getplus" download manager and "extras" (i.e., toolbars, virus scan links, etc.) on the main Adobe page.'''
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download links and other information''':
#** https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#** '''or''' you can download, save, then run the manual installers for IE, then for Firefox (and all other browsers) from here: http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall

Product Expiry and Release Date

I have two products set up, one to expire on 7th Feb, the other to start on 8th Feb. They have an increase in price hence the expiry of one and release of the new product.
Does anyone know if one will expire at midnight and the other start at 12.01am?? Is that how it works?
I'm also in Australia so I don't know if the time is set differently?? (Sorry if that sounds stupid)

Perfect....if not please reach out to our live support chat or submit a case ASAP so we can assist further.
- http://helpx.adobe.com/business-catalyst.html (Select Business Catalyst and proceed)
Cheers!
-Sidney

Classification and release

Similar Messages

Maybe you are looking for