Classification change not stored in change number using BAPI_OBJCL_CREATE

Hello SAP Guru's,
When using BAPI_OBJCL_CREATE to create classifications and using a change nr in parameters, the object is not recorded in the change nr.
When you use the transaction CA01, object is well created in change number.
We use the BAPI in a program and we need the object saved in change nr.
So if I read table AEOI, I won't find any entry under the change nr. It is the issue.
Why isn't it recorded?
Thanks in advance for your help.
Regards,
Rudy

Hello,
Please try to create a class first for a material-plant-batch as required by you manually.
After this step, check the key (Field:OBJEK) in table KSSK for the above manually created classification. Pick the OBJEK from the table KSSK and pass the key in the same pattern as that of the value from table KSSK.
for example in case of Document classification,
for Doc DRW-1234567890-00-000,
we have the key (OBJEK) as: <b>DRW1234567890 00000</b>
Hope this helps.
Best Regards, Murugesh AS

Similar Messages

Changes not stored. Sheet to go has detected a previous archive has not closed correctly.

Using the Program Sheet To Go, suddenly the ipad2 shut down. When I tried to re open the file A legend said: "Changes not stored. Sheet to go has detected a previous archive has not closed correctly. Want to open the file again?" and when I selected the option "yes" the program clossed whithout updating the file. If I open the file again the same legend appears
Can you help me how to solve the problem? Thanks

Quit the app completely and then launch it again.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Try the app again.

BOM changes(Not creation) with EC Number

Hi
I want to make the ECN as mandatory while changing the BOM,not for creation.
I tried by setting OS27,OS25 settings for BOM. I tried BOM creation with status 3(With history requirement). System gives only warning message,not the error message.(Message no. 29045)
I tried to make the Change number field as mandatory,but it applies it to CS01 & CS02. I want only in CS02.
Plse help me out if any knows the soultion.

Dear Sudhar,
1.Please check in OS27 - Tick mark is included for EC Management Active &
BOM validity manitained and History Requirement.
2.In OS25 - For History Requirement.
3.Get the help from ABAP consultant,to make use of field exit for the particular
screen CS02 ,which has got a screen number.The system will not allow the user
to enter into the next screen unless that field is not filled.
4.Check for the Auth.Object C_STUE_NOH
With this Logic only we are using in my present project.
Check & reply.
Regards
Mangal

How to Change stock type of SERIAL NUMBER using IQ02 ?

Does anyone know how I can change the stock type from stock in transfer (stock type 04) to unrestricted stock (stock type 01), using IQ02?
Quantity of material is updated while posting document with movement 313 but the stock type of Serial is still not updated.
I will really appreciate a response.

Hi,
Stock in transit is not a stock type.
Stock in transit is "Quantity of a material that has already been withdrawn from storage at the issuing plant on the basis of a stock transport order, but has not yet arrived at the plant to which it is being transferred (receiving plant)'.
and you can do sto only from unrestricted stock.
There are three types of stock which are provided by SAP -
1) Unrestricted use stock;
2) QI (Quality Inspection) stock; and
3) Block stock
and Special stocks which are all coming under above three types of stocks only.
for your problem first you do GR, in MIGO screen you can select stock types.
if your material assigned with serial number, when doing MIGO itself, you will be asked to enter the serial numbers(if it is manual assignment).
Edited by: Prabhaharan SAP MM on Jul 19, 2011 10:03 AM

How to change the space for check number using OT45?

How to use OT45 to change the check no.of FF68 Check Deposit? I want to change the variant so that I can increase the space for check number as have come up with a special case can someone please help me out how can I do it via OT45?
Thanks in advance...
Regards
Nitin

Hi Amit,
Yes, I agree that we can create a new variant and can assign it after activating it. But, what I want is that I have created a new variant and check space in FF68 is 3 digits and how can I make changes in OT45's new variant so that cheque space gets changed to 10digit or more.
Please Help.
Thanks in advance...
Regards
Nitin

Sales order changes not updated in change log

Hello Gurus,
In my project, the sales orders have default delivery block. Only authorised people can remove the block. The list is maintained in a Z Table. Recently for one sales order the delivery block was removed automatically and the delivery happened in the background(user's version). The Change log in the sales orders do not have any details of the changes to delivery block. My questions are,
1. how to identify the details of the changes in delivery block(who removed the block)
2. Any other place to find out the changes to the order in addition to the change log.
3. If change log in sales order is not having the details, can we find the details in table CDHDR
Please help me to solve the problem.
Regards,
Kishore

Hi
Please go to VA03 transaction and then go to Environment and select the changes (Display Document changes), put the document No then Execute the same.You could able to see changes carried out in the document.(Table VBAK and Field LIFSK)
Regards,
Jaiprakash.P.T

Changes not reflected in Change to Document (tcode CRMD_ORDER)

Hello Expert,
I made a change in field 'Planned Completion Date', in my transaction through tcode CRMD_ORDER.
When I view Change to Document (CRMD_ORDER > top menu > Extras > Change Documents), the change is not reflected.
All changes are usually captured in the Change to Document.
Perhaps it is captured somewhere else?
Please assist.
Thank you.
HJMY

Hi HJMY,
Check if the Change document object provided for CRM_ORDER has the field in the SAP provided structure. This can be verified in transaction SCDO -> select change document object CRM_ORDER and display, you will see list of structures on the left hand side, if the field you are refering to is a part of one of these structures then the changes in this field are displayed when you go to (CRMD_ORDER > top menu > Extras > Change Documents). If it is not present then you will have to create a new change document object and assign a proper structure, you can generate update program to update that change documents. Hope this helps.
Thanks,
Priyanka

CS5.5 Upgrade does not accept the serial number used for CS 5 Master Collection install

Installed CS5 Master Collection from disk with given serial number. CS5 Master Collection installed fine. Inserted CS 5.5 Design Standard disk, and entered its serial number. It asked for a qualifying product/serial number. I selected "Master Collection CS5" and entered the serial number I had just used to successfully install that product. I get an error saying "This serial number is not for a qualifying product. Please try another."

Serial Number or Activation Issues
You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help making contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

Unhiding menues using AMIBCP (changes not saved)

Hi all
I'm trying to unhide som menues in a HP OEM bios for an MSI OEM board using AMIBCP, but changes I make are not seen when I flash the updated rom-file. Actually, the strange thing is that all sub-menues are allready enabled when I open up the rom-file in AMIBCP, so there must be some additional settings that needs to be made to enable sub-menues. Or is the code behind the menues not in the rom-file at all? I've flashed with AFUWIN.exe with settings: "all blocks" and "Destroy CMOS checksum" enabled. Any tips are greatly appreciated.
I'm using the "latest" AMI-tools: "tool_8_RC1".
If anyone wants to help out, the rom-file in question can be found here (open exe-file with winrar to extract rom-file).

Quote
Out of topic: Invested in a Bios Savior the other day, sure feels good to be able to test mods without worrying about getting the system to work again.
Yeah I got tired of hotflashing chips, so I broke down a year or so and bought one myself. Well worth it IMO, if you flash alot of BIOS's.
Quote
BTW: how did you spot 3 offsets that had changed and how did you know they were in the Single Link Arch module? I'm just learning about bios modding.
Hexeditor compare function. It this case the entire BIOS file 314.rom is a single file. Inside the BIOS are the modules. You can see the modules with MMTool. Some of these are compressed and some are not, and you can see the order(address) they reside. Opening both 314.roms I had and doing a hex compare and the end of the file(uncompressed) you can see the date changed and slightly above that the checksum for the whole file. This make sense because these would have changed. In other places though you can see big blocks of changes. Big blocks are most likely the compressed modules changed, because if you change anything within the file it changes the whole compression algo and you get a block of "change" in the main file. There isn't much you can get from the main file because it's compressed but if you know the location of the modules it can save you time extracting every module and looking at it. Because of it's location from MMTool and it's real world function I decided Arch BIOS was the module to extract from each 314.rom to compare. Opening that in hex compare function and you get those 3 offsets that have changed from 00 to 01. In most BIOS's this is a toggle of some sort. 1 on 0 off, or vice versa(it could mean show something, gray something, allow something to be changed etc) I really have no idea what it means in this case after a short glance, but I found it weird that just opening the BIOS, doing nothing and saving it, changes so much in the AMI BIOS, this is not the case for Award. Maybe it's normal but I would think it would be a string of change, not 3 independant changes of that nature. I also noticed the SMBIOS was cleaned up in the "saved 314" it has space at the end of the file deleted. This change also makes sense.
Quote
I'm trying to unlock the "hardware monitor" sub-menu. I wan't to be able to control the sys and cpu-fans (setting other temperature thresholds and/or voltages to the fans). The "hardware monitor" checkbox is allready "enabled" when I open up the rom-file, so I'm not sure how to "really" enable it. Haven't cleared CMOS, but will do that.
Another idea I saw in there, what if you change all the supervisors in the hardware menu to user. Perhaps that is blocking it? Just an idea to throw around. Also I can see you can change the temps but voltages doesn't look to have an option. Another option to try, if you just "save" it, try "save as", or vice versa, maybe just "save as", open that file and mod it, then save(or save as).
I really don't know my AMI stuff, this might be easy then I am making it, just some ideas for you...
EDIT: Took too long typing here at work, I see BK has the supervisor idea too (great minds think alike maybe?) heh , well maybe it's a good omen.

How do I change my incoming calls to view caller's phone number instead of name? This is for numbers not stored in my contacts (i.e. Unknown)

How do I change my incoming call view to see the "phone number" instead of seeing "Unknown" for contacts who are not stored in my phone? Whenever a call comes in it says unknow instead on the phone number that is calling.

You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
That way you can quickly log in to your own account - then back to his.
You should obviously have different passwords.

I changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?

i changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?
i have tried signing out of imessage and signing back in. (when i do that and am asked to select my email adress, i see my new number but it is greyed out and i cant select it)

But under send and receive, my old number is still displayed while my new number isn't.

How do I change the phone number used for iMessage on iPad 4

I want to change the phone number used on iMessage on iPad. Any help?

It's best to use an email address (gmail.com?) for FaceTime and iMessage on your iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

Issue with posting change note processing using movement type 309

while processing Posting change note using transaction LT05, i am getting error 'Available quantity is less than selected quantity'. we need the quantity in posting change note to be picked from same storage bin from where it has been picked during transfer posting using 309. currently, it is showing all storage bins in ascending order for selection while Posting change note posting.
if we reqwhile mass porcessing of Posting change note using LSMW, it pickes the 1st storage bin. if 1st storage bin quantity is less than selected quantity of PCN then it is showing above error.

Hi Vishal,
The materials are managed by batch? Please check the batches of the material in the different storage bins. SAP asign the storage bin taking into account the material batch number and the oldest quant.
When the storage bin is not indicated, SAP looks at the batch number, and goes to the storage bin where this batch for the material is allocated. If SAP find more than one storage bin, SAP consumes from the batch that has the oldest quant.
I really dont understand deeply your question.
Hope it helps.
Regards
Enzo

Batch Classification Values not getting changed

Hi Gurus,
I am using the following bapi ( BAPI_OBJCL_CHANGE ) to change Batch classification values Eg: Cut clarity etc.
when i pass these values thru the function module in the program it is not getting changed while when i change it through msc2n it gets changed successfully...
I have passed the following values in the parameters of the bapi :
OBJECTKEY            = v_objectkey
OBJECTTABLE        = 'MCH1'
CLASSNUM             = V_CLASSNUM
CLASSTYPE           = '023'
KEYDATE                = 30.04.2010
ALLOCVALUESCHARNEW
CHARACT = CLARITY
VALUE_CHAR = P040
VALUE_NEW   = P040.
Can some one help me solve this....
Needed urgently..
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:31 PM
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:32 PM

Hi Jacky,
I am posting the code here.. Do let me know if u have ne queries:
REPORT ZNAVBATCH.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: P_MATNR TYPE MATNR,
            P_CHARG TYPE CHARG_D,
            P_WERKS TYPE WERKS_D,
            P_LGORT TYPE LGORT_D.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
DATA: WA_BATCH TYPE BAPI1003_OBJECT_KEYS,
        WA_ALLOCCHAR TYPE BAPI1003_ALLOC_VALUES_CHAR,
        WA_ALLOCVAL TYPE BAPI1003_ALLOC_VALUES_NUM,
        INT_BATCH TYPE STANDARD TABLE OF BAPI1003_OBJECT_KEYS,
        INT_RET1 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET2 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET3 TYPE STANDARD TABLE OF BAPIRET2,
        LV_KEY TYPE BAPI1003_KEY-OBJECT,
        INT_ALLOCVAL TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_NUM,
        INT_ALLOCCHAR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CHAR,
        INT_ALLOCCURR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CURR.
WA_BATCH-KEY_FIELD = 'MATNR'.
WA_BATCH-VALUE_INT = P_MATNR.
APPEND WA_BATCH TO INT_BATCH.
WA_BATCH-KEY_FIELD = 'CHARG'.
WA_BATCH-VALUE_INT = P_CHARG.
APPEND WA_BATCH TO INT_BATCH.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
    EXPORTING
      OBJECTTABLE    = 'MCH1'
    IMPORTING
      OBJECTKEY_CONC = LV_KEY
    TABLES
      OBJECTKEYTABLE = INT_BATCH
      RETURN         = INT_RET1.
IF SY-SUBRC = 0.
   WRITE: 'SUCCESSFUL'.
    CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
      EXPORTING
        OBJECTKEY              = LV_KEY
        OBJECTTABLE            = 'MCH1'
        CLASSNUM               = 'ZTBATCHCHR'
        CLASSTYPE              = '023'
        KEYDATE                = SY-DATUM
      UNVALUATED_CHARS       = ' '
      LANGUAGE               = SY-LANGU
    IMPORTING
      STATUS                 =
      STANDARDCLASS          =
      TABLES
        ALLOCVALUESNUM         = INT_ALLOCVAL
        ALLOCVALUESCHAR        = INT_ALLOCCHAR
        ALLOCVALUESCURR        = INT_ALLOCCURR
        RETURN                 = INT_RET2
    IF SY-SUBRC = 0.
      WRITE : 'SUCCESSFUL'.
      READ TABLE INT_ALLOCCHAR INTO WA_ALLOCCHAR WITH KEY CHARACT = 'CLARITY'.
      IF SY-SUBRC = 0.
        WA_ALLOCCHAR-VALUE_CHAR = 'C02'.
        WA_ALLOCCHAR-VALUE_NEUTRAL = 'C02'.
        MODIFY INT_ALLOCCHAR FROM WA_ALLOCCHAR INDEX SY-TABIX TRANSPORTING VALUE_CHAR VALUE_NEUTRAL.
      ENDIF.
      CALL FUNCTION 'BAPI_OBJCL_CHANGE'
        EXPORTING
          OBJECTKEY                = LV_KEY
          OBJECTTABLE              = 'MCH1'
          CLASSNUM                 = 'ZTBATCHCHR'
          CLASSTYPE                = '023'
         STATUS                   = '1'
         STANDARDCLASS            =
         CHANGENUMBER             =
         KEYDATE                  = SY-DATUM
         NO_DEFAULT_VALUES        = ' '
       IMPORTING
         CLASSIF_STATUS           =
        TABLES
          ALLOCVALUESNUMNEW        = INT_ALLOCVAL
          ALLOCVALUESCHARNEW       = INT_ALLOCCHAR
          ALLOCVALUESCURRNEW       = INT_ALLOCCURR
          RETURN                   = INT_RET3
      IF SY-SUBRC = 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           WAIT          = 'X'
        IMPORTING
          RETURN        =
        IF SY-SUBRC = 0.
          WRITE: 'SUCCESSFUL'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.

Classification change not stored in change number using BAPI_OBJCL_CREATE

Similar Messages

Maybe you are looking for