Classification Data (SLED) not Updated for Movement Type 561

Dear All,
I have noticed that after uploading the opening stock with movement type 561, the Classification data (Date of manufacture & Shelf Life expiry date) which was captured in MB1C is not updated in the batch master in Classification Tab.
Is this standard SAP behaviour for 561 movement type? Or is there any config is missing?
Please advise.
Regards,
Suresh.

Hi Suresh,
For your question I understand that while uploading the initial balances, system didn't ask you for the Manufacturing date or total shelf life date. Following is the solution:
You have to maintain "Check SLExpir.date" and "Classif.batches" indicators for the movement type 561 or any movement type you required. This customization can be perform through SPRO>>MM>>IM>>Goods Mvt. and mvt. No.
Also activate SLED at plant level in customization.
Regards
SAK

Similar Messages

  • MIGO - GR - Others -- Serial Number Not saved for Movement Type : 561

    Hello,
    I am trying to post good receipt-other ( for movement type 561) using MIGO transaction. I have specified all required data.
    Also depending on the item qty., I entered serial number in serial number tab.
    Its creating document successfully. However if I try to display same document using MIGO, serial number is missing.
    I tried to debug the code and I realized its not saving serial number itself.
    For other movement type its creating document with correct serial number.
    If I repeat same process using same data using transaction MB11 its posting successfully and I can see serial number using MIGO transaction as well.
    One more thing which I've noticed is when I post document using MIGO, Account assignment details are missing. However with MB11 I can see account assignment data too.
    Would be really appreciated if someone can help me on this.  I dont know If I'm missing any configuration part here.
    Thanks & Rgds,
    Nilesh

    Any help Experts?
    Nilesh

  • Some key figure are not update for movement type 101

    Dear All,
    I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
    I have loaded the data according to stranded procedure in "How to Load...."
    I have checked the values of material in R3 and it is there.
    Example of the record::
    Material    Plant Movement type  Calender Day    quanity Base Unit
    10101      01       350                     01.02.2006     20             KG
    10101        01       101                     05.07.2006                      KG
    10101         01      101                      10.07.2006                      KG
    The Quantity is not appearing in second and third record.

    Hi,
    Please check whether you have set  ''Rule groups''  at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
    Please check whether you have set this option at transfermation level.
    For example, may be in your case materials from different plants are updating to different key figure.
    Thanks,
    Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

  • Profit Center not updated for mov type 511

    When we are doing the goods receipt through transaction MIGO with mov
    type 511 (Receipt of delivery without charge) as 2nd line item along with
    mov. Type 101 as first line item, profit center document is not getting
    updated for 2nd line item (GLPCA-MSL), but for 1st line item (mov type
    101) profit center getting updated.
    If we are doing the GR with movement type 511 alone, profit center
    (GLPCA-MSL) updated correctly.

    hi,
    As per your error i might understand.
    please check for second line item Item okay is marked or not.
    if its 511 then please check whether Pricing control in MA-master whether its a Moving average or Standard price.
    as you said for singular 511 profit center gettng updated then you can very well compare to GR's.
    Regards,
    Ninad Kshirsagar

  • BAPI_GOODSMVT_CREATE is not working for movement type 701 in MIGO

    Hi gurus
    Can anybody help to track that bapi: BAPI_GOODSMVT_CREATE is not working for movement type 701 for MIGO Transaction.

    call this standard BAPI, AND EXECUTE IN SE37
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(GOODSMVT_HEADER) LIKE  BAPI2017_GM_HEAD_01 STRUCTURE
    *"        BAPI2017_GM_HEAD_01
    *"     VALUE(GOODSMVT_CODE) LIKE  BAPI2017_GM_CODE STRUCTURE
    *"        BAPI2017_GM_CODE
    *"     VALUE(TESTRUN) LIKE  BAPI2017_GM_GEN-TESTRUN DEFAULT SPACE
    *"     VALUE(GOODSMVT_REF_EWM) LIKE  /SPE/BAPI2017_GM_REF_EWM STRUCTURE
    *"        /SPE/BAPI2017_GM_REF_EWM OPTIONAL
    *"  EXPORTING
    *"     VALUE(GOODSMVT_HEADRET) LIKE  BAPI2017_GM_HEAD_RET STRUCTURE
    *"        BAPI2017_GM_HEAD_RET
    *"     VALUE(MATERIALDOCUMENT) TYPE  BAPI2017_GM_HEAD_RET-MAT_DOC
    *"     VALUE(MATDOCUMENTYEAR) TYPE  BAPI2017_GM_HEAD_RET-DOC_YEAR
    *"  TABLES
    *"      GOODSMVT_ITEM STRUCTURE  BAPI2017_GM_ITEM_CREATE
    *"      GOODSMVT_SERIALNUMBER STRUCTURE  BAPI2017_GM_SERIALNUMBER
    *"       OPTIONAL
    *"      RETURN STRUCTURE  BAPIRET2
    *"      GOODSMVT_SERV_PART_DATA STRUCTURE
    *"        /SPE/BAPI2017_SERVICEPART_DATA OPTIONAL
    *"      EXTENSIONIN STRUCTURE  BAPIPAREX OPTIONAL
    *"      GOODSMVT_ITEM_CWM STRUCTURE  /CWM/BAPI2017_GM_ITEM_CREATE
    *"       OPTIONAL
      call function 'BAPI_GOODSMVT_CREATE'
        exporting
          goodsmvt_header         = goodsmvt_header
          goodsmvt_code           = goodsmvt_code
          testrun                 = testrun
          goodsmvt_ref_ewm        = goodsmvt_ref_ewm
        importing
          goodsmvt_headret        = goodsmvt_headret
          materialdocument        = materialdocument
          matdocumentyear         = matdocumentyear
        tables
          goodsmvt_item           = goodsmvt_item
          goodsmvt_serialnumber   = goodsmvt_serialnumber
          return                  = return
          goodsmvt_serv_part_data = goodsmvt_serv_part_data
          extensionin             = extensionin.
    commit work.
    hi, rewards point, if this is useful,
    regrds
    karthikeyan

  • Is it possible auto TO for movement type 561? if so, how ?

    Hello,
    Could  any one suggest whether auto TO possible or not for movement type 561?
    regards
    rk

    Hello,
    when a transfer requirement or a posting change notice is created from the movement type,the transfer orders are created by batch input using the report RLAUTA10 (for transfer requirements) or RLAUTA11 (for posting change notices).
    You post the document using 561 movement type. If related setting for auto TR creation (T-code OMKX) is done then TR will be created in the background. You can create the TO automatically from this TR using  report RLAUTA10. Refer T-code OMKZ for Auto creation setting. You can also proceed for immidiate creation of TO.
    Thanks
    Milind

  • Transaction Key for Movement Type 561

    Hello,
    For movement type 561, I know one of the Transaction Key is BSX.  I would like to ask what is the other Transaction Key as I would like to set the GL Account Determination.  Thanks.
    Thanks.

    Hi
    Transaction keys required for 561 movemnt type are
    BSX - For the inventory posting
    GBB - BSA - For initial entry of stock balances
    For performing the 561 movment G/L account needs to be assigned to both these transaction keys.
    Thanks & Regards
    Kishore

  • MB11/MB1C/MB1B post GL entry for tax for movement type 561 initial stock

    Hi,
    We want to bring in stock into new system using movement type 561. The usual account posting is:
    Debit stock
      Credit account in OBYC GBB
    How can I add additional tax posting in the transaction? For e.g.
    Debit stock
    Debit input tax
      Credit account in OBYC GBB
    I tried to open up the Tax Code in the movement type field status but it doesn't show up in any of MB11/MB1C/MB1B.
    Any customized BAdI/user-exit for this?
    Any suggestions?
    Thanks in advance for help!

    hi,
    you cant update the tax account directly using the 561 mov type.
    please find below the link for more clarifications regarding the tax accounts.
    http://forums.sdn.sap.com/thread.jspa?threadID=2126200
    Regards,
    velu

  • G/L account assignment for movement type 561

    Hi Guys,
    Can someone please let me know where and how do I assign G/L account for the movement type 561.
    I'm referring to the account assignment tab in Material document, where the G/L account shows up. Where do I set this?

    Hi There
    In OMJJ for the movement type 561- there will be account grouping where you assigned the acc grp key,,
    For this Acc Grpng key in OBYC_in GBB_you have to maintain the GL account- In the combination of- Valuation Modifer-General modifier-Valuation Class-Debit(GL acc)-Credit(GL acc)
    in Material document- if you are using MIGO-
    MIGO- Display- Material Document-Enter the material document- Click enter- And click on the Doc info Tab-There you wil lfind the FI documents- Click on that now you will get the acc documents,,,
    Thanks
    Senthil

  • Account assignment for Movement type 561

    Dear Professionals
    Hi,
    I am new to SD.
    Pls give me ur advice.
    In my environment,
    MB1C:"Enter Other goods Receipt"
    -> Journal: "dr.Inventory/cr.COGS"
    (Movement type: 561)
    VL01N:"Outbound Delivery Create"
    -> Journal: "dr.Inventory/cr.COGS"
    (Movement type:601)
    I guess that the journal for MB1C is incorrect.
    I configured BSX and GBB on OBYC,
    but I have no idea how to change the account assignment per Movement type.
    Use OBWM?
    BR
    Y.Kaneko

    In OBYC for Transaction GBB,  instead of BSX,  maintain BSA, VAX & VAY for each Valuation Class of material and its respective G/L Account.
    For example, if you are trying for a FERT material, then the entries should be
    0001::::BSA:::::7920::::::4XXX30
    0001:::VAX:::::7920:::::::5XXX30
    0001:::VAY:::::7920:::::::6XXX30
    Also check in OMJJ whether you have the settings as follows:-
    MvT::S::Val.Upd:::Qty.upd:::Mvt::Cns:::Val.stng:::Cn:::TEKey:::Acc mod:::Check acct.
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::2:::::GBB:::::::BSA::::::::::::::::X
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::3:::::PRD::::::::PRA:::::::::
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::2::::GBB:::::::BSA:::::::::::::::::X
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::3:::::PRD:::::::PRA:::::::::
    Check whether your settings are similar to above.
    thanks
    G. Lakshmipathi

  • Field selection for movement type 561

    Hi Guru's,
    i want to add value field in the movement type 561 to while uploading the stock i can add the total quantity with total value, if i am wrong correct me, with detailed process.
    Regards,
    qsm sap

    Hi QSM SAP!
    The value of the stocks to be uploaded using MvT Type 561 can be placed in the External Amount in Local Currency Field. To show this field during goods receipt:
    SPRO - MM - IM and PI - Settings for Enjoy Transactions - Settings for MIGO - Field Selection per MvT Type - New Entries - (561 EXBWR) then set as either required or optional.
    Hope this helps! =)

  • MIRO should not happen for Movement Type 107

    Dear All,
    We have a peculiar scenario/requirement fulfilled by business and we have done almost all but getting stuck in below area:
    We have developed a output type in order to automatically post Mat Doc with Movement Type 107 once the user reverses Material Document with Mvt Type 103, This as per a business requirement. That means when 104 will be done for a Mat Doc with Mvt Type 103, "PO History Tab" will display in following order:
    103 > 104 > 107
    After 107, user will reverse it with Mvt Type 108 and specific G/L accounts will be hit which will update the "PO History" as:
    103 > 104 > 107 > 108
    Now issue is we want MIRO to be possible for Mvt Type 108, not for Mvt Type 107 else it will create a vendor liability twice and business will end up paying amount to vendor twice.
    How can this be achieved?
    Your sound suggestions are most welcome.
    Regards
    Samier Danish

    No replies
    Regards
    Samier Danish

  • What is d BAPI for reversal of Good Receipt Note(GRN) for movement type 102

    Hi ABAPers,
       I have got requirement like this , I have done Goods Receipt Note (GRN) based on Purchse order Number using '.BAPI_GOODSMVT_CREATE' with 101 movement type.
       But now my requirement is reversal of good receipt note(GRN) based on Material Document Number (or) Purchase Order Number with 102 movement type. what is the bapi name i need to use. and i need to give reason for the reversal of GRN.
    please tell me the field name for reason  in bapi.
    i have searched in the net, but i could not get proper answer to this isse.
    Highly appriciate who gives answer as early as possible. I need to complete this task EOD. please give replies.
    Thanks & Regards,
    Vinay Kumar.

    Hi,
    If your material document has specific movement type i.e. 101, if you cancel document using BAPI_GOODSMVT_CANCEL, it automatically picks associated movement type 102 defined in customizing setting, you don't need to pass 102 explicitly while cancelling.
    I have not seen reason code in this bapi, but it is required to pass reason code then you may try transaction code MBST using BDC.
    Thanks,
    Ashok Veer

  • Inspection lot not created for movement type 101 O

    Dear all,
    . We are creating a PO (ME21N) indicating in the view u201CDelivery addressu201D the same vendor than the PO and the flag u201CSubcontracting vendoru201D
    . The material has in MM02 the inspection type 0130 Receiving Insp. from External Processing.
    . There is QM plan with the Usage 53 GR external process.
    . When we do MIGO 101 u201CSpecial Stock Indicatoru201D O Parts prov. Vendor. The system doesnot create an inspection lot.
    But in MMBE the stock appears in u201CStock Provided to Vendoru201D u201Cquality stocku201D. The customer wants to control that stock in u201CQuality inspection:
    Can somebody help me?
    regards
    shilpa

    SPRO - QM - Quality inspection - Inspection lot creation - inspection of goods movement - Deactivate Quality Inspection for a Movement Type
    Check in this setting, whether QM is deactivated for 101 and special stock O

  • Date picker not showing for datetime type in advanced search page

    Hi,
    I have an advanced search page in my SharePoint 2013 site. There is a property which is of type datetime. For that I'm not getting a date picker. I don't know why this is not working. It is showing the date picker in SharePoint 2010 but not in 2013. Can
    anyone help me on this? Thanks in advance.
    Thanks,
    Jawahar
    Im searching more abt me...........

    A date picker was never supported in Advanced Search.
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

Maybe you are looking for

  • Checking for updates.... forever...

    Every time I connect to my PC I'm getting the above, but it NEVER provides an update, just keeps "checking".  My phone also tells me there's an update available.  Anyone know how to resolve this? THANKS

  • Need Help With Something In ICloud Program

    I am trying to figure out if there is anyway possible I can save all my photos into ICloud? I keep looking on the Apple homepage and all it talks about is photo storage in ICloud.  I can't even find anything in my ICloud about photo storage. If anybo

  • Cannot install elements 9 on my new computer

    I have just bought a new computer and cannot install my photoshop elements 9 and  premiere elements 9. The program starts to roll back during installation. I have de-installed both programs from my other computer. My old PC is running window xp and m

  • Item Cost Revaluation

    Hi All! How to do the revaluation of Item Cost in following scenario? by start of Fiscal yr 1/04/08 - have entered a value for items. n all thro this days the transactions are done both in n out. Now we 1. need to reduce the item cost in a stage of f

  • [SOLVED] Can't install; dual-boot sharing partitions?

    Hi, I'm currently dual-booting Linux Mint 14 and Windows 7 on my laptop, and decided to replace Mint with Arch. Somehow, though, I don't think I ever divided my HDD into seperate partitions for Linux and Windows. Using gparted (or fdisk), /dev/sda (m