Classification data transportation

hello everyone,
i am facing this issue of transporting classification data in release strategy. the value range in one approval level in QAS does not match with DEV. is it possible to transport classification values to QAS without  using ALE?
or are there any other options?
thanks

Hi,
You can use LSMW,or normally people do it manually..
Regards,
Prashant

Similar Messages

  • Transporting Classification Data Source

    Hi Experts,
    I am trying transport the Classification data source from ECD to ECQ. But the the affects are not visible in ECQ.
    Please suggest some way to solve out this problem. Is there a different method for transporting the Classification Data Sources.
    Regards,
    Richa

    Hi,
    Classification data sources need to be handeled in a different way.
    You need to manually maintain the client in CTBW t-code in the each R/3 system after the transport to a new system.
    classification data sources are client depdendent entries in CTBW table and table entries do not change when you transport them from one system to another.you have to do it manually in CTBW t-code in each system.
    Also after changing client in each system you will have to generate it again.Only after generation it will beready for use.
    See the notes 588184.It will solve your problem.
    Thanks
    Ajeet

  • Extract Classification data from R/3 for XI

    Hi all
    I am currently interning with a corporation and am stuck at a crucial point.
    I tried using MATMAS/MATMAS05 and CLFMAS/CLFMAS02 for extracting the classification data from R/3 systems. i want to primarily generate valid iDoc's and transport them to XI later.
    However, everytime I run the extraction object MATERIAL_EXTRACT from mdm_clnt_extr, the iDoc's generated have no classification data...
    am stuck ppl...  my colleagues say i should try looking for a new extractor for CLFMAS specifically..
    Please help.

    HI,
    Guess I did not state the problem clear enough.
    The T-Table incorporates only the material number. I need to get different classification fields for all relevant materials.
    So I am looking for a way to extract the classification data associated with the material numbers in my Z-table.
    Anybody got an Idea?
    Thanks for your help,
    Regards,
    Minima

  • EASY DMS Problem 6.0 SP11 Patch01 (Unicode), display classification data

    hallo
    i have installed Easy DMS 6.0 SP11. In the search result, no classification data are shown. The problem doesn't exist in 6.0 SP03. Any idea?
    Regards
    Hans
    Edited by: Hans Koeniger on Feb 2, 2009 8:58 AM

    Problem seems to be solved, perhaps by transports in the backend.

  • Change Documents for Material Classification data Changes

    Dear Friends,
    We have configured custom classification objects for material master and also we are able to maintain the material characteristics using MM01, MM02 and also using ALE interface. But I am not able to find the Change Documents in any of the table CDHDR & CDPOS. Please let me know what needs to be done to capture the change documents for a material classification changes in this case.
    Many thanks for you inadvance.
    Beast regards,
    Mallikarjun.

    Change logging of all Classification (including Material Classification) is controlled in the Class type configuration.
    SPRO -> Cross Application Components -> Classification System -> Classes -> Maintain Object types and Class types -> Select Object Table = MARA -> Double Click Class Types under MARA -> Select Class Type 001 and Display -> Check whether "Change Docs" check box is checked on.
    Also check that another flag "Chg. docs for Class" is set on all Objects under the Class type too (by double clicking the Objects folder for a Class type).
    If the Change docs flag is checked on for the relevant Class type and Object then change docs are logged in CDHDR and CDPOS tables for object "CLASSIFY"
    Also the "Change docs" flag cannot be set unless the "Multiple objects allowed" flag is also set in the Class type configuration.
    Please refer [SAP Note 65124 - Classification Change Documents|https://service.sap.com/sap/support/notes/65124]
    Also the above note says and I quote: If "Multiple objects allowed" indicator is not set, start the RCCLUKA2 program. The classification data are converted and the indicator 'Multiple object types allowed' is set. Now you can set the indicator 'Change documents' in Customizing of the class type. However, it only says that change documents are generally possible for this class type. Therefore you have to select objects under 'OBJECTS' for which the change documents are to be written.
    So if the Class type doesn't have "Multiple objects allowed" set (along with Change docs flag not set), there is also a conversion that needs to be run using program RCCLUKA2.
    Also when you transport the configuration to a target system, the program RCCLUKA2 should be run again, refer [Note 379180 - Classification data disappeared|https://service.sap.com/sap/support/notes/379180 ]

  • Tax classification data is not  saving in QAT

    Hello Gurus,
    I have a issue  with tax classification data in Quality.
    When i give tax classification data in developement server its saving the data , i transported the same request to  quality  here it is not saving the tax classification.
    Note -In master   data  tax classification data is  saving in delopement but its not saving  master data tax  classification  data in quality.
    looking for inputs.
    Thank you all  inadvance
    Regards
    venkat

    Hi JP,
    The relevant condition type are maintained in OVK1, OVK3, OVK4
    the problem is still same,
    Looking for some more inputs .
    thanks&regards
    venkat
    Edited by: K.Venkata Chalapathi on Jul 31, 2010 3:16 PM

  • Changing Character set in SAP BODS Data Transport

    Hi Experts,
    I am facing issue in extracting data from SAP.
    Job details: I am using an ABAP data Flow which fetches the data from SAP and loads into Oracle table using Data Transport.
    Its giving me below error while executing my job:
    (12.2) 05-06-11 11:54:30 (W) (3884:2944) FIL-080102: |Data flow DF_SAP_EXTRACT_QMMA|Transform R3_QMMA_EXTRACT__AL_ReadFileMT_Process
                                                         End of file was found without reading a complete row for file <D:/DataService/SAP/Local/Z_R3_QMMA>. The expected number of
                                                         columns was <30> while the number of columns actually read was <10>. Please check the input file for errors or verify the
                                                         schema specification for the file format. The number of rows processed was <8870>.
    reason: When analyzed I found the reason for this is presence of special characters in data. So while generating the data file in SAP working directory which is available on SAP Application server the SAP code page is 1100 due to which the delimeter of the file and the special characters are represented with #. So once the ABAP is executed and data is read from the file it is treating the # as delimiter and throwing the above error.
    I tried to replace the special characters in ABAP data Flow but the ABAP data Flow doesnot support replace_substr function. I also tried changing the Code Page value to UTF-8 in SAP datastore properties but this didnt work as well.
    Please let  me know what needs to be done to resolve this issue. Is there any way we change the character set while reading from the generated data file in BODS to convert code page 1100 to UTF-8.
    Thanks in advance.
    Regards,
    Sudheer.

    Unfortunately, I am no longer working on this particular project/problem. What I did discover though, is that /127 actually refers to character <control>+<backspace>. (http://en.wikipedia.org/wiki/Delete_character)
    In SAP this and any other unknown characters get converted to #.
    The conclusion I came to at the time, was that these characters made their way into the actual data and was causing the issue. In fact I think it is still causing the issue, since no one takes responsibility for changing the records, even after being told exactly which records need to be updated ;-)
    I think I did try to make the changes on the above mentioned file, but without success.

  • Text Data source for Classification Data

    Hi BW Gurus, Ajay Das and Kishore helped me very well on this, just last step doubt. In r/3 system I have added the char tYPE AND kyf TYPE CHARACTERISTICS to classification data now it has generated the Classification customer attribute data source 1CL_0CUSBMW01 and I see the text datasources generated afor char type characteristics in /NCTBW such as 1CL_AABMW01,1CL_AABMW03,  etc.. now when i go back to BW
    i see the customer attribute data source 1CL_0CUSBMW01 and also text datasources generated in datasource overview, but when i go infosource tab in rsa1 I WAS INTstructed to create the infopackage on 0customer for customer attribute data source 1CL_0CUSBMW01 AND load the data now I " Have a doubt I think I also have to create 4 more infopackages and specify the text datasources generated for the characteristic added in CTBW ex 1CL_AABMW01,1CL_AABMW03. to load the text for the characteristics. please clarify asap if it is required to create all these text infopacks to load the text datasource to respective infoobject or just customer attribute data source 1CL_0CUSBMW01 infopack will take careof every thing, beacuse my manager did not told me to create the text infopack so how will the text get loaded for the infoobject
    soniya

    1CL_0CUSBMW01 is the DS containing 0CUSTOMER and the two (or more) characteristics I assume. This has to be used to update 0CUSTOMER. You can either use the existing infosource, or, create a new one to do this. You will then need a new infopackage to run this.
    Let us say one of the characteristics also has text, and you want to bring that to BW using generated DS 1CL_AABMW01. You will replicate it, and use it to update texts to infoobject XXXX (whatever this characteristic is, in BW). This will not be used to update 0CUSTOMER.
    Let us say your class char was COLOR. Its values were 1,2,3,4,... and the associated text was Red, Green, Blue...
    Now, based on the above, 0CUSTOMER will have an attribute COLOR which will have values in Attr table as 1,2,3,4...
    The text table for characteristics COLOR will have values as
    1--Red
    2--Green
    3--Blue.....
    The text will NOT go to 0CUSTOMER if that is what you are asking.

  • Function Module for Creation of classification data for a Routing

    Hi
    Can you please let me know if there are any function modules/Bapi's to create Classification data for a Routing?
    THanks
    Shekar

    For creating classification data, have a look at the function group CTMS and function module CTMS_DDB_SET_VALUE_INTERNAL.
    Not sure what you mean by "Routing".
    For BAPIs also look into the function group CLBPA, that sits in the same development package CLCL as the function group CTMS.
    Hope this helps.

  • BP - default and check classification data at CREATE/SAVE using BDT + BADI

    Hi,
    I do have several requirements around Business Partners and BDT.
    1. When a BP is created, I want to default certain fields depending on what BP role is maintained, specifically I am looking at fields on the classification tab (BDT application CRMD).
    --> I do not want to use transaction variants.
    --> I want to use the BDT or implement a BADI (which I don’t think does exist)
    2. When a BP is saved, I want to check whether certain fields have certain values – depending on the BP role.
    --> Field selection is not sufficient.
    --> I tried using the BDT calling own function modules at different events – without success. When I call function module CRM_BUPA_FRG0040_GET_DETAIL to get current classification data at DCHCK, structure ls_frg0040 is not updated yet.
    At a later event I can not stop the save.
    Is there a way to force an update of memory, so that function module CRM_BUPA_FRG0040_GET_DETAIL returns current values.
    --> I also tried BADI BUPA_FURTHER_CHECKS, but it is not called at all.
    Any help is highly appreciated.
    Can anyone send me the BDT cookbook at [email protected]?
    Thanks in advance,
    Juergen

    Hi Juergen,
    From the BADI stand-point (and assuming dialog usage).
    1/ You have:
    BUPA_INITIAL_SCREEN  "Initial Screen for BP creation"
    You should even be able to set a particular tab to which you want to navigate and then fill in the relevant fields, prior to having the screen completely painted.
    2/ You have badi's"
    A - PARTNER_UPDATE "Business Partner"
    and
    B - BUPA_GENERAL_UPDATE  "Business Partner General Data"
    when performing updates to the partner.
    Looking at the call stack (reading bottom-up) these BADIs are called a the points shown, both with the change-before-update method:
    --> B
    10 GENERAL_BADI_CALL
    9 BUP_BUPA_EVENT_DSAVE
    8 EVENT_DSAVE
    7 BDT_DATA_SAVE
    6 SAVE_GLOBAL_MEMORY
    5 SAVE_GLOBAL_MEMORY
    --> A
    4 COMMIT_MAINTENANCES
    3 TAKE_OVER_AND_SAVE
    2 TAKE_OVER_AND_SAVE_AND_RELOAD
    1 ON_SAVE
    Brad

  • Classification data in Material master

    Hi
    Is there any FM to read classification data in material master from buffer. I know there is a FM CLAF_CLASSIFICATION_OF_OBJECTS to read, but this reads from database tables. I want to know the FM, which would read this from buffer.
    Thanks
    Karthik

    Hi Ganga,
    Yes I am passing different countries to table .
    LOOP AT IT_STAX into WA_STAX.
           wa_taxclassifications-depcountry = wa_stax-aland.
            wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
            wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
            wa_taxclassifications-tax_ind    = wa_stax-taxim.
            APPEND wa_taxclassifications TO it_taxclassifications.
    ENDLOOP.
        CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
          EXPORTING
            headdata           = wa_headdata
          TABLES
            taxclassifications = it_taxclassifications
            returnmessages     = it_return[].

  • Table name of Classification Data in Material Master

    Hi Experts,
    Greetings to all...
    I wish to ask one question.
    I wanted to upload the initial data in material. in initial data I wanted to maintain the classification data for the batch management. Please tell me what is the name of table/field where the material and classification data is stored. I couldnt find anything in the table KLAH, AUSP, CABN, CAWN.
    Thanking you in advance,
    Regards,
    UK.

    Dear UK,
    If you using ALE:
    Follow following sequence:
    CHRMAS Characteristics that contain global and local object dependencies
    KNOMAS (global object dependencies)
    CHRMAS Characteristics that contain global and local object dependencies
    CLSMAS Classes with characteristics and their overwritings, including object dependencies
    The characteristics and characteristic values must be transferred second time
    to create the assignment of the global object dependencies to the characteristics
    and characteristic values.
    BR,
    ian Wong

  • Uploading TAX Classification data in material master

    Hi,
    I have to upload tax classification data in material master for countries DE,IT,FR,ES,CH and GB.
    I have used BAPI_MATERIAL_SAVEDATA and passing values to table TAXCLASSIFICATIONS.
    But bapi is uploading tax classification only for country DE.
    When I am creating through MM02 its getting updated.
    Can anybody tell me what is the problem ?

    Hi Ganga,
    Yes I am passing different countries to table .
    LOOP AT IT_STAX into WA_STAX.
           wa_taxclassifications-depcountry = wa_stax-aland.
            wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
            wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
            wa_taxclassifications-tax_ind    = wa_stax-taxim.
            APPEND wa_taxclassifications TO it_taxclassifications.
    ENDLOOP.
        CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
          EXPORTING
            headdata           = wa_headdata
          TABLES
            taxclassifications = it_taxclassifications
            returnmessages     = it_return[].

  • CIF of material classification data

    Dear Experts,
    Since a recent technical upgrade to our systems, I have seen a change in behavior of the integration of material classification data from ECC to SCM.  Before the upgrade, classification data transferred with the initial CIF of the material.   If material classification did not exist on the ECC material at the time the material was added to a new integration model and activated, we "missed the boat" so to speak.  Classification would not automatically transfer (CIF) to APO when if finally was loaded in ECC, even if the application area/integration models were correct.   As a work-around, we would be forced to generate and activate a material model that specifically excluded the material, then generate and activate another material integration model that included it again.  Then the classification would transfer.
    After the upgrade, the opposite condition is true, the "initial CIF" of the material will not transfer material classification data at all, it will only transfer if the classification data is added/changed after the material itself is transferred to APO.  As a work around for this, if the classification data is already (correctly) loaded in ECC at the time of the initial material CIF, we are changing the status of the material classification from 1 to 3 and back to 1, just to trigger a change, then the classification is transferred instantly to APO.
    Are there configuration settings that will allow material classification data to CIF in both cases: with the initial CIF of the material to SCM and also in the event of a change and/or addition of classification data in ECC?  Thanks for any advice you can provide.
    Best Regards,
    Jeremy

    Dear Matt,
    What you are looking for is achieved by downloading the customizing objects from R/3 to SRM.
    This is a must before you download materials/services from R/3 to SRM.
    Customizing objects are 4:
    DNL_CUST_BASIS3 - This takes care of Basis settings in SRM for downloading.
    DNL_CUST_PROD0 - This takes care of Material number conversions from R/3 to SRM.
    DNL_CUST_PROD1 - This CO actually brings matl groups from R/3 to SRM as product categories.
    The result you can see in trx COMM_HIERARCHY (not in COMMPR01 which is for materials/services.
    There in R3MATCLASS you can see replicated and locally crated prod categories
    and in R3PRODSTYPE you can see the material typs from R/3
    DNL_CUST_SRVMAS - This takes care of Customizing: Service Master
    The transaction for this is R3As in SRM
    and you can monitor the same through R3AM1.
    also you can check QRFC of R3 and SRM with SMQ1 and SMQ2.
    The next step after this is material/service downloading from R/3 which is done with the same trx R3AS but business objects
    Material and
    Service_master
    You can set fileter in trx R3AC1 for this.
    BR
    Dinesh
    (Helpful? pl. award the points)

  • Updating Batch classification data from MIGO for Purchase order

    Hi,
    I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
    1) Pass material and batch to MCH1 table to get CUOBJ_BM.
    2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
    3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
    4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
    I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
    Class type 023, object type MCH1, object RAW-6             0000001151
    Object is currently locked by user
    The assignment was not changed
    Please let me know how to do it. Is there any BADI or User Exit?

    Hi,
    As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
    I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
    Regards,
    Rafi

Maybe you are looking for