Classification for RG1 in J1I5

Hi Gurus
I need your help.
I have a scenario of textile company.
In one plant they have two notification where the production happens.
in Notification 29 all production happen for export & local sales
in notification 30 the production happens only for local sales.
User needs RG1 report notification wise or in the same RG1 report the material manufactured in both the notification should be identified separately.
To achieve this i am planning to have some Z classification like RMA & ROP for 29 & ZRMA & ZROP for 30.
So that for all the GR at 29 user will user ROP & RMA & For 30 user will use ZRMA & ZROP which i will use for separate reporting.
If some one knows that i can achieve this in some other way or this solution will not not work please advise me
Regards
Prabhat

Pl post question in [ Help SAP Community Network Forums » SAP Solutions » ERP - Sales and Distribution (SD) General |;

Similar Messages

Steps for Excise Opening Balance for RG1

Hi,
Can anybody tell me the steps involved in uploading the stock balance involved for RG1 updates.
Rgds,
Indrajit

Dear Indrajit
The following is the sequence for RG1 updation:
1. Set the Loose pack Indicator in SE16 Table J_1IRG1BAL to P. You also have to specify the Excise Group, material Number, User Id and Time of Updation. This entry is to be done only once, the very first time.
2. Update RG1 in J1I5. For the initial entry, specify the Posting Date and the Classification. You need to be extremely careful on the Classification type you use. If the material is coming from MB1C (Initial Stock Upload, possibly because you have uploaded the existing Stocks based on Cutover data), use ROP. If the updation is because of Production, you need to use Classification type: RMA - Receipt from manufacture". There is a rare possibility you may not see any entry for the manufactured quantity. More on this in Point No: 6
3. Also update the outward movements of finished goods ( IDH for Domestic Sales and IWE for Exports under Bond/ IDE for Exports against payment of Duty).
4. Extract the RG1 Register using T Code: J2I5. You must get a Green checkmark.
5.Print the RG1 Register using J2I6.
6. Sometimes you may not be able to view the manufactured material when you use RMA indicator in J1I5.(MIGO would have been used with movement type 101). Verify, if in Logistics-General --> Tax on Goods Movement --> India --> Business Transactions --> Incoming Excise Invoices --> Specify which movement types involve Excise Invoices, you have maintained 'RG1 Register' against Movement Types 131 and 132.
thanks
G. Lakshmipathi

Query for rg1 initial entry

hi gurus
i made initail entry for rg1 registers but now my query is wheather i have to update the RG23A-1 for value update or how it will be updated
in register for value
points will be rewarded for answer
regards
kunal

No need to update RG23A.
Just Update the RG1 Register in J1I5 and extract it using J2I5 if needed.
Points are useful.

Excise Invoice cannot be captured for RG1(Finished Goods) material

Dear Friends,
While creating GR and choosing the option only capture Excise Invoice system showing error as follows:
Excise Invoice cannot be captured for RG1(Finished Goods) material
Message no. 4F276
The Material is a Raw Material(ROH) and Price control is "V".Pl tell me and earlier 3 times GR is done on this material w/o error.
Pl help me how to get rid of this error.
Regards,
Ask

In GR check in Excise item tab under excise item whether it is showing Raw Material or Finished goods?
Simulteneously check in J1ID for the said material & chapter-id combination what material type has been maintained?
Regards,
Indranil

Different material description for RG1 register

Dear Experts,
I have a client requirement for change in material description (materialmaster) to a different description.
The description maintained in material master is for viz
SS CT BT 200mm-123-093MKO
But excise need description
SS BILLET
Where to maintain this additional description in material master and fetch the same for RG1 register.
Let me know any stranded user exit is available. If the above case is possible than also let me know what would be the bad implications on processes (like stock will not match with description).
Regards,
RB
Edited by: RB on Feb 26, 2009 6:18 PM

you either create a quickview by joining MARC and MAKT tables for this.
or much easier. you press F4 in a material number field.
then you go to search help W plant material.
there you erase the language from the selection pop-up and execute
in the hitlist do a right mouse click and you can directly download

Different DG description in transport classification for the DG Classific.

Hello EH&S Experts,
Following Situation:
For the Dangerous Goods Management we have created our LS_UN_SUB (UN-listed substance) for example the UN 3082 with 3 "NAM-DG" Identifiers for 3 languages (DE,FR,EN) for the dangerous goods regulations (value assignment in EH&S) ADR & IMDG.
So, now we created the corresponding DG_CL_SUB (Dangerous Goods classification) for example the CL3082 also with the 3 "NAM-DG" Identifiers for 3 languages (DE,FR,EN) and add the UN3082 to the DG Regulation ADR & IMDG in the "Transport Classification" Tab.
Problem:
1. As we working mainly in DE (German language) the DG Description in the Transport Class. Tab is displayed in DE (German). So for ADR and IMDG the german description is displayed. But for IMDG regulation it doesn´t exists a german description from the legal point of view.
2. The english DG description could also be different for IMDG and ADR.
Question:
1. Is there a solution to display always the english description for IMDG, also if someone is logged in in german?
2. Is there a solution to maintain DG descriptions per regulation?
Thank you in advance and best regards.

Hello Thomas
Regarding your question:
1. Is there a solution to display always the english description for IMDG, also if someone is logged in german?
My solution would be "simple". Maintain the "english text" with the language DE (so e.g. not NAM DG DE Anilin but NAM DG DE Aniline.
Further option:
As far as I can remember the identifier "selection" process: the system will try to find first in hit list etc. the identifier corresponding to log on language and then search for a "different one) (e.g. D_HITLIST). If you mantain e.g.
NAM DG EN Aniline
and NAM DG Space Aniline
I believe the "aniline" will show up in any log on language there the system ist not able to find a "specific" one .
Regarding:
2. Is there a solution to maintain DG descriptions per regulation?
There are some options. Best option (as far as I can remember the topic) is to go on like this:
NAM DG (ADR Text) DE Text 1 => link the identifier to a "regulatory list (e.g. ADR)
NAM DG (ADNR Text) DE Text 2 => link the identifier to a "regulatory list (e.g. ADNR)
In DG filling the most specific identifier is used to create a phrase and the most specific one (per regulation) is the one having the corresponding regulatory list assigned
Furthereon: as far as i can remember DG filling: the identifier on the level of LS_UN_SUB are used. So one option could be to create one LS_UN_SUB per regulation and to maintain the DG texts there and then combine them in the DG_CL_SUB per regulation according to SAP standard process (clearly the number fo LS_UN_SUB is increasing using this option.)
Hope that this helps.
C.B.
Edited by: Christoph Bergemann on Mar 30, 2010 3:58 PM
Edited by: Christoph Bergemann on Mar 30, 2010 3:59 PM
Edited by: Christoph Bergemann on Mar 30, 2010 4:00 PM
Edited by: Christoph Bergemann on Mar 30, 2010 4:01 PM
Edited by: Christoph Bergemann on Mar 30, 2010 4:01 PM
Edited by: Christoph Bergemann on Mar 30, 2010 4:03 PM
Edited by: Christoph Bergemann on Mar 30, 2010 4:03 PM

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

How to get Port Classifications for Logical Switch via scvmm console

Hello All,
We are creating some automation tool based on SCVMM console scripts.
In order to create vm we need to assign port classification based on Virtual Switch and then logical switch. The problem is that I could not find any way to retrieve port classifications assigned to logical switch (Virtual Port tab in SCVMMs logical
switch properties). There is Get-SCLogicalSwitch that return just name, description and some properties. There is also Get-SCUplinkPortProfileSet which returns Uplink tab data of SCVMMs logical switch properties. But no api to retrieve port classifications
for switch. Get-SCPortClassification also doesn't return switch assignments. Any ideas how to get this data?

I think you are looking for
Get-SCVirtualNetworkAdapterPortProfileSet.
This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.

Tax classification for sales order before ECC

Hi expert,
We have recently upgraded from 4.6C to ECC6.0 and noticed the following
issue, please kindly advise. Thanks.
The tax classification for one of the regular customer has always been
maintained as ‘0’ (Tax Exempt).
In 4.6C, in the sales order condition tab, the system will auto
calculate and reflect the output tax amount automatically for this
regular customer.
However, in ECC6.0, with the same customer and material, the sales
order will no longer auto calculate and reflect the output tax amount
anymore.
Nevertheless, if we maintain the customer tax classification field
as ‘1’ (Liable for Taxes) before raising the sales order, or if we
amended the sales order tax classification field manually as ‘1’, then
the output tax amount will auto calculte and reflect as expected.
We would like to know why is there such differences between 4.6C and
ECC6.0. What should be the proper standard behaviour and if there is
any actions required be get the system to perform as per in 4.6C?
Please kindly advise. Thanks.
Best Regards,
Vincent

Hi,
I am sure you must have done some of the analysis already on these points but it does not harm to do it again:
1) Check the Customer Master and check the Tax Category of the Customer to make sure that it is maintained as 0;
2) Check the Tax Record [MWST Tax Condition Type normally] for whichever tax table you are maintaining it for exists
3) Check in the Condition Tab in Pricing Details if you are finding the assess to the Tax Records happening for the Customer and Material combination.
If you find any of these three as the smoking gun you should be good.
I do not think personally that if the issue is only with one customer that this is an upgrade issue. Even otherwise, Tax related stuff has not changed in anyway between those versions.
Get back to me if you have any questions.
Thanks.

Classification for 0PROG_POS_ATTR (Investment management)

Hi All,
I tried to create a classification datasource with t-code CTBW for Investment Program Position (0PROG_POS_ATTR). Unfortunately this standard procedure is not supported for Investment Programs; the error message I get is:
Generating Datasources for inv. program is not supported, see sap note 74259.
Basically this note confirms that the standard procedure is not allowed in this special case and it suggests to enhance the master data manually.
Since I have to extract more than 10 classifications, for a total of 70 characteristics, it looks a bit complicated.
Have you experienced the same problem? Can anybody help me?
Thanks in advance,
Amelie

hi Rudolph,
as of bw 2.0b, attributes and texts use exit_saplrsap_002
hope this helps.
Note 413539 - TextDataSource enhancement with exit_saprsap_002 as of BW20B
Solution
You can use the SAP enhancement RSAP0001 to enhance the DataSources of the SAP Business Information Warehouse. This enhancement includes the following components for transferring data into a BW with a release level as of 2.0B:
Transaction data:       exit_saplrsap_001
Attributes, texts:      exit_saplrsap_002
Hierarchies:            exit_saplrsap_004.
For transferring data into a BW 1.2B, you still use the following enhancement components for InfoSources:
Transaction data: exit_saplrsap_001
Attributes:        exit_saplrsap_002
Texts:             exit_saplrsap_003
Hierarchies:       exit_saplrsap_004.

BAPI to create tax classification for business partners

Hi all,
I'm trying to create tax classification for a business partner (situated in the tab Control) from a BAPI.
I tried to use BAPI BUTX_FRG0010_CREATE, but I always receive an error...
Does someone know how to implemnt this ? Or do I need to use another fm ?
Thanks in advance !
kr,
Björn

Hello,
I should have mentioned that I'm creating Business partners in ERP, and not in CRM
The error I receive is this one :
Tax classification does not exist
The data I specify in the table is the same dataI fill in when creating a business partner manually.

Classification for Merchandise Category

Hi all,
I am an MM consultant but new to Retail. I am trying to set up classification for Merchandise category. I have created a characteristic profile and i assigned some characteristics in this profile (e.g ingredients, size, etc). Then i went to WG22 and assigned the characteristic profile to the merchandise category.
My issue now, is from where do i enter the values that i want for each merchandise category (i.e the ingredients, size, etc). As i have read, directly in each article you cannot. In CL20N you cannot as the class is of type 026 (internal).
Where do i do this?
best regards!

HI, let me describe what i did and which are my issues
1. I have created the characteristics and assigned the possible values
2. Then i though about two options:
     a) to create a characteristic profile and assign the characteristics to it
     b) assign the characteristics in the Hierarchy directly
3. I did both and my issues are:
     a) in the 1st option how i assign values to an article? i want each article of the merchandise category to be assigned to various values.
     b) in the 2nd option, i assigned the characteristis to the hierarchy (and thus to the merchandise category) and through MM42 i assgined the values to the articles. In that case my issue is during the search of an article based on the characteristics. There i select as a class the hierarchy and then i have to select the specific merchandise category in order to find articles, otherwise no results appear. Isn't it possible to find all articles of an hierarchy with specific characteristic value?
Best REgards

How can mass create batch classification for many material batches? ?

Hi Experts,
In our system , there are so many material batches which have not been classified，see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!

Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack

Change batch Classification for a BATCH.

Hi,
Does anyone know how to change the classification for a BATCH (Txn. MSC2N) programatically. Recording is not possible for the transaction MSC2N.
Thank you,
Mahesh

Use the BAPI 'BAPI_OBJCL_CHANGE'. Ensure to commit data afterwards.
Manoj

Update Batch Classification for a Material

Hello friends,
I'm facing the following problem : A specific BTCI wich simulates MB01 was calling another program called SAPLCTMS to update Batch classification for a Material, this program (SAPLCTMS ) seems to be not necessary after the support package Level 57 (we just installed SAP4.6C). I didn't find any note on OSS for this...
Now i'm trying to use this BAPI instead of BTCI for the Material batch classification :
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
         EXPORTING
              objectkey          = l_objnum
              objecttable        = 'MCH1'
              classnum           = 'ZGB_TIDCLASS'
              classtype          = '022'
              status             = '1'
              keydate            = sy-datum
         TABLES
              allocvaluesnumnew = t_valuesnum
              allocvaluescharnew = t_valueschar
              allocvaluescurrnew = t_valuescurr
              return             = t_return.
But its not working, it keeps asking for a batch number. I guess i'm not using the right FM ?
Any ideas about this ?
Thank you in advance for your help !
Best Regards.
Edited by: Soufiane FAYSSAL on Jun 18, 2009 11:42 AM

Hello,
I am Ashok Chelikani. I am working on the same Issue.
i am getting following message:
TYPE ID    NUMBER MESSAGE
E       |C1   |003          |Characteristic DIMENSIONSCOLOR not found or not valid
I        |CL   |736          |Assignment was not created
my procedure as follows:
CLEAR: lv_objnum.
lv_objnum = I_MSEG-MATNR.
**Get Object Details
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = lv_objnum
objecttable = 'MARA'
classnum = 'Z_RMBCH1'
classtype = '001'
TABLES
allocvaluesnum = lt_alloc_num
allocvalueschar = lt_alloc_char
allocvaluescurr = lt_alloc_curr
return = lt_return.
IF NOT lt_return IS INITIAL.
CLEAR: lv_objnum.
lv_objnum(18) = I_MSEG-MATNR.
lv_objnum+18(10) = I_MSEG-CHARG.
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = lV_objnum
objecttable = 'MCH1'
classnum = 'Z_RMBCH1'
classtype = '023'
tables
allocvaluesnumnew = lt_alloc_num
allocvaluescharnew = lt_alloc_char
allocvaluescurrnew = lt_alloc_curr
return = lt_return.
lt_return returing error message. Kindly help me.

Classification for RG1 in J1I5

Similar Messages

Maybe you are looking for