Classification of Material using LSMW
Hello
I using LSMW in order to create the characteristic. There are 4000 datas. This characteristis are going to be assigned to the class in order to have a classification of the materials.
Details:
In the 1rs step: I select object 0150 Characteristic and the program RCCTBI01
But I don't know if I have to use 0140 for class wich has the same program or 0130Classification and has this program RCCTB03.
But at the end when I created the batch imput the system generate the following message: Transaction not supported Message no. BL001
I have been trying with this transacctions: CT01, CT02, CT03, CT04, CL02, CL20N AND ALWAYS I OBTAIN THE SAME MESSAGE.
THANK YOU VERY MUCH FOR YOUR HELP
I never used batch input for classification, I usually do it with IDOC method.
In any case you have to create 3 objects.
One for the class
once for the characteristics
and then one for the classification.
regarding Batch Input, there is an OSS note 213120
As of Release 4.6A, the transactions of the class system are no longer suited for batch input.
If you have batch inputs from previous releases, you can continue using these since the old transactions still exist.
Where possible, use BAPIs or Direct Input instead of batch input. The old transactions will be eliminated in one of the future releases, so that the batch inputs will have to be converted anyway.
If you still want to use your own batch inputs, use the old transaction codes (such as CT01/02/03). If this should not work, use the alternatives mentioned above.
Similar Messages
-
Basic Data Upload to MATERIAL Using LSMW is not working
HI All,
we are using LSMW /SAPDMC/SAP_LSMW_IMPORT_TEXTS program to upload the basic text of the material, all steps are executed correctly and shows records are transfered correctly , but the in MM03 the text is not uploading..
EPROC_PILOT - MASTER - TEXT_UPLOAD Basic long text 1line
Field Mapping and Rule
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MATERIAL'.
NAME Name
Source: LONGTEXT-NAME (Name)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = LONGTEXT-NAME.
ID Text ID
Source: LONGTEXT-ID (Text ID)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-ID = LONGTEXT-ID.
SPRAS Language Key
Source: LONGTEXT-SPRAS (Language Key)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-SPRAS = LONGTEXT-SPRAS.
* Caution: Source field is longer than target field
/SAPDMC/LTXTL Long Texts: Row
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = 'L'.
TEXTLINE Text Line
Source: LONGTEXT-TEXTLINE (Text Line)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = LONGTEXT-TEXTLINE.
and at last it displaying as follws
LSM Workbench: Convert Data For EPROC_PILOT, MASTER, TEXT_UPLOAD
2010/02/01 - 10:14:25
File Read: EPROC_PILOT_MASTER_TEXT_UPLOAD.lsmw.read
File Written: EPROC_PILOT_MASTER_TEXT_UPLOAD.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
can any one tell us what could be problem
Regards
Channappa SajjanarHi , thanks for your reply,
i run the all the steps .
when i run the program it gives message as follows
Legacy System Migration Workbench
Project: EPROC_PILOT eProcurement Pilot
Subproject: MASTER Master data Upload / Change
Object: TEXT_UPLOAD Basic long text 1line
File : EPROC_PILOT_MASTER_TEXT_UPLOAD.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0 -
Hello LSMW experts,
I want to upload material master from flat file with some Plant and Sales Organization views in single load. But I am not sure how to map the header data (basic data), sales organization and plant data to the tool. Do I need to have separate files for basic data, sales org, and plant?
Is there anybody can help me on this? Thanks in advance.
Zamrihi,
Check this link for uploading material master in LSMW using RMDATIND direct input program..
http://help.sap.com/bp_blv1500/BL_US/documentation/LSMW_EN_US.doc
~~Guduri -
Hi Guys!
I have a LSMW in which I have to upload 7 files, one per tab (MM01, CREATING MATERIALS), and I decided tu use a direct input, but how can I build the structures of my files? One of the tabs should be header (All the 7 files have 7 fields in common between them) and the rest as items? Should i have to create one structure per file?
Could you please help me on that?
Best Regards,
Gabriela.> but how can I build the structures of my files? One of the tabs should be header (All the 7 files have 7 fields in common between them) and the rest as items?
First, I guess that each file has only one structure (it means all lines have exactly the same fields at the same positions).
When you create the source structures (one per file in your case), you can define a hierarchy (create one as the child of another one, by simply positioning your cursor). The relationship between structures (files) is made implicitly by using the same field names, that must be positioned at the beginning of the structure. Note: you can link 2 structures with several fields.
> Should i have to create one structure per file?
That's mandatory, otherwise you can't process the files! -
Material Classification Upload using LSMW
Hi SAP Experts,
We are thinking of using LSMW as a means to upload our material master data for the classification view. How is this done?
Can we use LSMW to upload materials with many class assignments with multiple characteristics?
Ex. Material A is assigned to class X and class Y. Class X has characteristics 1, 2, and 3. Class Y has characteristics 4, 5, and 6.
Would appreciate a swift response.
Thanks in advance!Hi All,
If it is the existing material you need to modify the Classification type. It can be done by BDC. If you instruct the ABAP team they will make it & give. I am not sure about modifying classification type using LSMW. If you need to create a new material master data with classification using LSMW i will give the steps.
Check out this link for LSMW Steps:
www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Reward if useful.
pherasath -
Creation of material using BAPI in LSMW without using material no.
Hi SAP Gurus,
I have a requirement of creating materials using the BAPI in LSMW.
I tried to create a material using the BAPI (Business Object - BUS1001006 , and method - SAVEDATA) which should be created internally, but it is asking the material number to be given externally and my configuration is setup to create the material number internally.
Even I looked into the material type which is associated with the number range and everything looks good.
Is there any solution to create the material by using BAPI in LSMW without passing the material no. externally ?
Appreciate your help.
Kalikonda.Hi,
it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
When creating material master data, you must transfer the material
number, the material type, and the industry sector to the method. You
must also enter a material description and its language.
Cheers -
Classification View in customer master using lsmw
Hi folks,
I have a requirement regarding conversion method that is fields regarding classification view in customer master needed to be populated r created in through xd01 transaction this should be done using lsmw tool,if tried with standard method and bapi method ,can any one tell how to do whether it is bapi r standard method plz dont suggest recording method,even it is idoc method k r can any tell me which function module exists fr this ,POINTS will be awrded for answers .Try FM : SD_CUSTOMER_MAINTAIN_ALL
Thanks
Seshu -
Upload Material master with long text using LSMW
Hello,
i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2, purchasing, purchase order text, plant data 1,2.
i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
please help.ca u clarify how can i do it.
suppos i have longtext "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is 10 RMT. A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire. F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
then what i have to do changes in lsmw.? -
Use of tax classification in material master
use of tax classification in material master
Hi
The indicator with which the system determines output tax for the material when processing sales and distribution-specific documents.
Generally it is done Country-wise. Like for one country No tax is applicable, for other country Full tax applicable.
Thanks
Prashanth -
Upload material using idoc in lsmw
hi ,
i m trying to upload material using idoc inbound processing in lsmw. but whnever i m giving partner name as lsmw & port name as lsmw (even i tried with different name also ). it gives error like port does not exits.
regards,
swapnilHi ,
Please foloow Link:[Check|http://****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm]
Regrads
Jana -
I want to upload material master (MM01) using LSMW with BAPI method
I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar nHi,
The business object is BUS1001.
Thanks,
Murali -
Problem in material master upload using LSMW
Dear All
I am trying to upload material master using LSMW (batch input recording).
I am facing problem while doing 14 step (Run Batch Input Session). When i'm running the batch input session, on the Create Material (Initial Screen), system picks values for material code, industry sector & material type but gives error message "select at least one view". system is not allowing me select the views which i selected while recording. system allows me to select all the view which i don't want.
why system is asking me to select the views and also how to select the required view?
thanks
manoj guptathanks charu
do i need to do complete LSMW steps fpr all the view separately? if i do LSMW for basic view1, for other view do i need to go for change TCode or create T Code?
thanks
manoj gupta -
Update the material quantity in the sales order using LSMW...
Hi Guru's,
I created one sales order using BAPI..now i wanted update the material quantity in the sales order using LSMW...
could you please provide the step by step process....
if anyone of you provide the program logic similar to requirement that would be helpfull to me...
thanks in advance
Srinivas....Hi Sri,
Hope it may help you.
First do the recording for VA02 transaction, in that give the existing sales order number
and update the Quantity and save it. Remaining steps are same what we used(LSMW) to upload data to applications.
Regards,
Vishvesh
if helpful, rewards it. -
Upload sales text for material master using LSMW direct input method
Hello Experts,
I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file
Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTH .
/SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME Name
Source: ZLONG_TEXT-MATNR (MATNR)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID Text ID
Rule : Constant
Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS Language Key
Rule : Constant
Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE Text Line
Source: ZLONG_TEXT-LTEXT (LTEXT)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file
Legacy Data On the PC (Frontend)
Data D:\Sales_Longtext.txt
Step7 -> Assign File
ZLONG_TEXT Source structure for long text
Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
Step 10 -> Display converted data
1 /SAPDMC/LTXTH 1MVKE MATERIAL1 0001E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench
Project: ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty.
Please help me with the same.
Regards,
Ranjith NHello Experts, I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1 *************************************************************************************************************
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure
/SAPDMC/LTXTH . /SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME Name
Source: ZLONG_TEXT-MATNR (MATNR)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID Text ID
Rule : Constant
Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS Language Key
Rule : Constant
Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE Text Line
Source: ZLONG_TEXT-LTEXT (LTEXT)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file Legacy
Data On the PC (Frontend)
Data D:\Sales_Longtext.txt
Step7 -> Assign File ZLONG_TEXT
Source structure for long text
Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
tep 10 -> Display converted data
1 /SAPDMC/LTXTH 1 MVKE MATERIAL1 0001 E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench Project:
ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty. Please help me with the same.
Regards,
Ranjith N -
Transferring MATERIAL MASTER DATA USING lsmw
I am using LSMW to transfer material master data from text file using direct input program RMDATIND. The problem is that the field WRKST in screen is of 48 characters while the batch data structure BMMH1 of field WRKST contains 14 characters. How can we transfer the full 48 characters in text file to THE FIELD BMMH1 IN DIRECT INPUT PROGRAM. Can we write any translation or routines . If yes, how is it possible. I can do the same using BDC but our client is already using the LSMW , only the new field WRKST for material has to be inserted. It is picking only 14 characters.
Regards
DebopriyoHi
Kindly use the sap note 351557 it is applicable for your release
if you have any further clarifications let me know
Regards
Damu
Maybe you are looking for
-
Hi there Accualy I have 2 problems with Pages 1- How can I get more Arabic Fonts with More Decorated style 2- The typing in Arabic should be from right to left and in Pages it's Happining but the typin marker is not doing this so its hard to fix any
-
Setting up computer to computer network caused wifi to stop working
Hi, I set up a tether using the FlashArmy App with my Iphone 4S and Macbook Pro. I created the computer to computer network and all worked well. However, now I can't return to my wireless network. It sees the network SSID but won't obtain the IP A
-
Remove poster icons from final cut pro v7 track objects
Hi Gang, Please see my attached pic first to help understand the issue. I don't need "poster" icons or frames in my track objects, I was hoping to suppress them. As you can see they obscure the area where my clip overlays are, making it harder to see
-
Tiny font on Menu Bar & on window when using Apple Mail on new Macbook Air
I have a new MacBook Air and all is good - except my Mail window has tiny fonts, including on the tool bar, and the Menu Bar is also has smaller fonts when Mail is active. I have made the actual messages readable but the rest of the screen is almost
-
SAP NW BW 7.3 - BICS connectors unavailable
Hello, I want to connect SAP NETWEAVER BW 7.3 and XCELSIUS 12.4 via BICS connectors. Unfortunately it does not work. I found that RSBOLAP_BICS module does not exist on my BW platform, therefore they do exist on other BW 7.0.1 SP8 system. Actually I