Classification of material

Hi, gurus here.
Some needed infomation about material are stored in its' classification.
I can not find the classification in 0material's masterdata.
I viewed the general info of classification. All characteristic descriptions of tab general's data elemtns are ATWRT.
So how do I get the classification of 0material?
Thanks, for your help.

Hi,
Check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a8b9c1-dee5-2d10-feb5-9b0d54126782
Regards,
Rajesh

Similar Messages

  • How to Change Batch Classification of material master

    Hi,
    How to Change Batch Classification of material master  in a production system,Pl note that there is no stock and no open qty still system is not allowing me to delete the old Classification and add my new classification.
    Guys any solution for this.
    Thanks in advance
    rgds
    bijaya pradhan

    I believe there is a FM VB_CHANGE_BATCH for this, any body tried this FM?

  • Use of tax classification  in material master

    use of tax classification  in material master

    Hi
    The indicator with which the system determines output tax for the material when processing sales and distribution-specific documents.
    Generally it is done Country-wise. Like for one country No tax is applicable, for other country Full tax applicable.
    Thanks
    Prashanth

  • MWST condition type tax classification of material

    Hi,
    we modified one user exit to change forcefully of tax classification of material in user exit MV45AFZZ  .
    here code is working fine but later it is changing to 1 instead of 2 while changing the sale order .
    IF sy-tcode = 'VA01' OR sy-tcode = 'VA02'.
          IF vbak-landtx EQ 'DE' AND vbak-stceg_l EQ 'DE'.
            LOOP AT xvbap.
              SELECT SINGLE matnr INTO w_half_tax_mat
              FROM   zhalf_tax_mat
              WHERE  matnr EQ xvbap-matnr      AND
                     valid_from LE xvbkd-prsdt AND
                     valid_to   GE xvbkd-prsdt.
              IF sy-subrc EQ 0.
                xvbap-taxm1 = '2'.
                MODIFY xvbap.
              ELSE.
                IF xvbap-taxm1 = '2'.
                  xvbap-taxm1 = '1'.
                  MODIFY xvbap.
                ENDIF.
              ENDIF.
            ENDLOOP.
          ENDIF.
          ENDIF.
    suggest me how to approach.

    Hi,
    You wont find any table for tax classification maintained in sales org-1 of material master.
    we maintain this while config in OVK4- which will store in Table:TSKM.
    based on tax category this tax classification called in material master.
    if you chek tax class in sales org-1. it shows some table structure.
    it wont store in any table.
    all the fields which is there in structures called from some other tables- wont have memory to store the records.
    hope it helps

  • Tax Classification for Material in sales Org1

    Hi Friends,
    I want to define the tax classification for my material. Can someone please let me know the path or the t-code where I can maintain the same.
    Regards,
    Wasim.

    IMG > Sales & Distribution > basic functions > tax > .....
    for which country you finally have to do the classification in material master is dependend on the assingment of plants to sales org.
    IMG > Enterprise structure > assignments > sales >  assign plant to sales org distribution channel

  • Changing classifications of material master data and reporting

    Hello experts,
    I have to update long list of material's classifications, I know about the transaction CL24N but in this
    one, I have to assign a material to the class and then for each material update the value of the wanted
    parameter.
    My questions are :
    1. Is there any better way to do this massive update ?
    2. Is there any standart report on classifications values for all materials ?
    Kind Regards,
    Amit Berku

    Hi Amit,
    You can look for the Report RCCLBI03 (this Report loads the File). This is the fastest way to load classifications.
    You can also use BAPI  'BAPI_OBJCL_CREATE' or write a batch input program, but my advice would be go to for Standard Report if this does not solve your problem then use BAPI and the third option would be to use Batch Input program.
    Hope this helps you!
    Reetesh

  • CLASSIFICATION VIEW / MATERIAL MASTER

    HI EXPERTS,
    I am facing a problem regarding classification view of a material master.
    In my organisation for a perticular material type I have to maintain CLASSIFICATION view. But by mistake I forgot to maintain classification view of some material.
    There are more than 1000 material , so it is not possible to check each material individually and if classification view is not maintained that I have to maintain it.
    Kindly reply me with some standrad method, so that I will check for which material classification view is maintained or not. According to that I will proceed.
    Regards.
    raghu.

    MM50 is the way.
    If you didn't add the classification for a material then you have to extend the material with the classification view. If you enter Maintenance Status C and your material type, it will lsit all materials that DO NOT have a classification view created.
    If however, you created the classification view, but didn't enter one of classification values, this will not help. You could try the tools in Classification System --> Environment -->Reporting.
    Rgds
    Richard

  • Classification in Material Master

    Hi All,
    I have to create two characteristics A and B for maintaining in the classification view of the material master.
    Some of the sample values for these parameters are as given below.
    for A - 
    1) -6-4/6-4/8
    2) 0,27kg/m2
    3) 7X10
    4) 8x5,9
    5) 16O-8
    6) 112 Fotm
    7) 112 HP
    8) 112+1
    9) ADTRANZ
    10) INTEGRAL
    11) T=0,38 B=21
    12) -591593
    for B;
    1) +474,6,7
    2) 0,55/0,w
    3) 3GZS443H
    4) Etik: ME
    5) Etik: TV
    6) FERT
    7) FIMOT
    8) L3=458
    9) L3=462
    10) Rör ej !
    11) 3681
    12) 11111
    Please can someone tell me how to create characteristics for these two parameters and what should be the class type (Material class?).
    Regards,
    V S

    Use CL02 tocde to create the class for class type 001
    Than create the characteristics using tcode CT04 and create two char.
    one for A and second for B
    than after saving the charteristics
    go back in change mode and enter the value on value tab of characteristics
    than assign this class to material.

  • ABC classification for material

    Hello
    Does ECC 6.0 offers any kind of standard ABC classification (allocation of materials to groups A, B, C , D, etc based on consumption , stock , turnover , etc ) for material.
    By my opinion, it should be some kind of standard programs that allows to do it.
    Thanks

    HI,
    Check trasacton code MIBC.
    Prerequisites
    Before running the analysis, you must define the valid cycle counting indicators in the Customizing system of Inventory Management and define the percentage allocation of the materials to the individual cycle counting categories.
    You can also directly change the percentage values via the indicator Change CC percentages on the initial screen of the analysis.
    To set the cycle counting indicator for a material, you need authorization to change material master records (authorization object Material Master: Plant, activity 02).
    Features
    The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
    Only materials that have a cycle counting indicator
    All materials; that is, including materials that have no cycle counting indicator.
    During the analysis, you can have the system automatically update the cycle counting indicator in the material master record for the selected materials
    Regards,
    Shailesh Mackwan

  • Check change in classification of Material master

    Hi all,
    How & where can we check changes done in classification view of Material master like changes in characteristic's values etc.
    Thanks

    changes in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
    maybe it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system

  • No value in the classification of material master data

    Hi:
    When I am going to assign the value into the class of batch type 023,and I found there is no value for me to choose,how add the value of class in customziation?

    Hi
    This will help you for config setting:
    Logistics general - Batch Management
    1.1. Specify Batch Level
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction  OMCT
    1.2. Batch Number - Activate Internal Number Assignment
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction  OMCZ
    1.3. Batch Creation - for Goods Movements 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
    1.4. Characteristic Value Assignment -- Update Standard Characteristics 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
    1.5. Activate Batch Classification for Goods Movements in Inventory Management 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction  OMCV
    1.6. Batch Determination u2013 Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction  OPLB
    1.7. Batch Determination u2013 Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction  V/C7
    1.8. Batch Determination u2013 Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction  OPLF
    1.9. Batch Determination u2013 Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction  V/C2
    1.10. Batch Determination u2013 Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction  OPLE
    1.11. Batch Determination u2013 Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction  V/C1
    1.12.  Batch Determination u2013 Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM   Search Procedure Transaction  OMCY
    1.13.  Batch Determination u2013 Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction  OPLG
    1.14.  Batch Determination u2013 Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction  V/C3
    1.15.  Batch Determination u2013 Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction  OMCG
    1.16. Batch Determination u2013 Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction  OPL8
    1.17.  Batch Determination u2013 Batch Search Procedure Allocation(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction  V/C5
    1.18.  Batch Determination u2013 Activate Automatic Batch Determination(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction  V/CL
    1.19.  Batch Determination u2013 Batch Selection Class
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction  CL01
    1.20.  Batch Determination u2013 Sort Rule
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction  CU70
    1.21.   Batch Determination u2013 Make Settings for Batch Where-used list
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction  OMBB
    Regards
    ram

  • Classification of Material using LSMW

    Hello
    I using LSMW in order to create the characteristic. There are 4000 datas. This characteristis are going to be assigned to the class in order to have a classification of the materials.
    Details:
    In the 1rs step: I select object 0150 Characteristic and the program RCCTBI01
    But I don't know if I have to use 0140 for class wich has the same program or 0130Classification and has this program RCCTB03.
    But at the end when I created the batch imput the system generate the following message: Transaction not supported Message no. BL001
    I have been trying with this transacctions: CT01, CT02, CT03, CT04, CL02, CL20N AND ALWAYS I OBTAIN THE SAME MESSAGE.
    THANK YOU VERY MUCH FOR YOUR HELP

    I never used batch input for classification, I usually do it with IDOC method.
    In any case you have to create 3 objects.
    One for the class
    once for the characteristics
    and then one for the classification.
    regarding Batch Input, there is an OSS note 213120
    As of Release 4.6A, the transactions of the class system are no longer suited for batch input.
    If you have batch inputs from previous releases, you can continue using these since the old transactions still exist.
    Where possible, use BAPIs or Direct Input instead of batch input. The old transactions will be eliminated in one of the future releases, so that the batch inputs will have to be converted anyway.
    If you still want to use your own batch inputs, use the old transaction codes (such as CT01/02/03). If this should not work, use the alternatives mentioned above.

  • BAPI to read classification of Material Variant

    Hi experts,
    In our customer we are using material with a reference product KMAT (Material Variant), and we need a BAPI to read the configuration of the materials.
    Does anyone knows which BAPI can we use to read the configuration of the material variant?
    We tried to use the BAPI_PRDSRVAPS_GETCLASSES, but for material variant it didn't work, just to products that doesn't have a KMAT related.
    Thanks in advanced
    Thiago Cyrillo

    Thiago,
    Why dont you use a class like /SAPAPO/CL_MC01_CCV and method like GET_SINGLE_CHARVAL?
    Kedar

  • Purpose of maintaining classification view in material master

    Hi gurus
    can anyone explain Purpose of maintaining classification view in material master with example
    Regards
    Vishal...

    Hi
    One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
    the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
    there is many more advantages & ways of using classification in material master.
    Regards
    Rang

  • Disabling Material Master Classification

    Hello,
    We have a requirement where we will disable the user going into material classification screen while creating or changing the material master based on authorization object. As we know, the material master transaction will switch to classification transactions in this process. We looked into various user exits and enhancement spots where we can put our code, but we were not successful. We anticipate your help on this issue.
    Thanks in advance,
    Christian

    Hi Christian,
    Your requirement is to restrict certain users to change or create the classification in material master. (If i have understood it correctly then...) the solution is to control it through authorizations.
    The Authorization object is M_MATE_STA. If the field STATM in this object has a value C included then those profiles/users will have authorization for Classification view and others wont.
    Your SAP security Admin should be able to hel[p you with this. By doing so you would have no need to control it using User exits or enhancements.
    Regards,
    Kathir

Maybe you are looking for