Classification Segment in IDOC for Material Master
Hi,
Can anyone let me know which IDOC message type will get me the classification segment in that. I am assuming that to be the segment is E10CLFM but i dont know which IDOC message type has it.
which IDOC type will get the batch data Inbound to SAP with all the batch class and batch characteristics to be posted to inventory.
thanks a bunch
you can create inventory with IDOC
message type MBGMCR
basis type MBGMCR03
alternative with program RM07MMBL
You have to decide if you create batches internally while loading inventory or if you load the batches seperatly and assign just the batch number when doing the movement for initial inventory.
Especially if your batch characteristics cannot be valuated automatically, you have to load them before inventory to get all the characteristic values.
batches can be loaded with Idoc
BATMAS
BATMAS03
Similar Messages
-
Problem with mass IDoc for Material Master
Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
PoojaHello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge. -
Idoc for Material Master Specific to SAP AFS
Hi All,
I have requirement to create & extend the material master from Non-SAP to SAP specific to AFS industry, however can anyone suggest which inbound idoc needs to be configured in details like (Message type, basic type & process code)
Also please suggest how it can be extend at the same time to different plants
Thanks & Regards
ParagHi Tomek,
Thanks for details, can you please guide / suggest on extend the mateial for other plants & Storage location as well after creation of material.
Thanks
Parag -
OutBound IDoc for Material master
Hi everyone
I need to send Material Masterdata whenever data is saved in MM01,MM02 using BTE1250 .
I need to use function module MASTERIDOC_CREATE_REQ_MATMAS to send idoc.
Can anyone please help me with a basic program/ code for sending Idoc using MASTERIDOC_CREATE_REQ_MATMAS.
I am new to Idoc and could not understand programs given in SDN.
Thanks in advance.Hi,
Refer to SAP standard program "RBDSEMAT".
Regards
Vinod -
Could sap do mass craete/update for material master classification?
Hi Expert,
Now we craeted new classifcaiton for material master. It need be assigned to related many parts. May I query Could sap do mass craete/update for material master classification? How to do this ?
Thanks
AliceHi,
Another option is using LSMW, please refer to below thread for more details:
Classification view in MM01 with LSMW
cheers, -
Extend Classification View for Material Master
Hello, How do I extend classificiation view for Material Master? Is there any BAPI or FM to do that?
I cant find any place to extend it with BAPI_MATERIAL_SAVEDATAHi,
Use this FM to create Classfiaction view BAPI_OBJCL_CREATE
Regards,
Shan -
IDOC for Batch Master Conversion
Hi,
Is there any IDOC for Batch Master Conversion (Transaction : MSC2N) ?
The data being maintained is in Basic data 1 and classification tabs.
Regards,
Esha RajHello,
I faced the problem with BATMAS03. When drilling down to F'tn BAPI_BATCH_SAVE_REPLICA I could that one and similar BATMAS03 get to work with filling following set of fields. Adapt of course the values to you're system.
BAPIBATCH_SAVE_REPLICA_
MATERIAL = 000000000000033001
BATCH = 12543872
PLANT = D010
CLASSALLOCATIONS
CLASS_TYPE 023
OBJECTKEY 00000000000003300112543872 (in our case MATNR&BATCH combination, dependend on system setting Plant could also be needed)
CLASSNUM FROZEN_FINISHED (Classification Class)
OBJECTTABLE MCH1
CLASSVALUATIONSCHAR
CLASS_TYPE 023
OBJECTKEY 00000000000003300112543872
OBJECTTABLE MCH1
CHARACT LOBM_ZUSTD
VALUE_CHAR X
This works now fine and similar for the BATMAS IDOC
Hope this is helpfull for you.
Dirk -
LSMW IDOC MATMAS05 Material Master
Hi Experts,
Actually ,Iam using IDOC method in LSMW for Material Master Upload.
For that Iam using the IDOC type MATMAS05 .
So in the input file when Iam not the giving the Material Number IDOC is getting failed
with status 51 and giving the errors that "NO MATERIAL NUMBER
TRANSFERED".
And
if Iam giving a material number in the test file it is again getting failed
giving the error " The material does not exist ".
I am not able to understand what iam missing here.
Other than this Iam passing all the mandatory fields required .
Also in the each segment iam passing the MSGFN = '009'. i.e. to create.
Pls help.
Thanks in Advance.
Regards,
MithunHi Chuin,
This forum doesn't provide specific info on LSMW. You may check https://service.sap.com/lsmw for more info.
Regards,
Markus -
BAPI for Material master update
Hello,
I need to upload and change data to the classification screen of Material master (MM01/02). I am thinking of using BAPI_CHARACT_CREATE and BAPI_CHARACT_CHANGE. Can we use BAPI_MATERIAL_SAVEDATA to upload and change characteristic data for material master(MM01/02)?
Can anybody provide me some sample code for mass upload and mass change of characteristic data to material master?
Thanks in advance
Rajesh.Hi Rajesh,
You can use standard SAP program <b>RCCLBI03</b> to do mass upload.
Please check the program documentation for more information.
Also you can take a look this BAPI/FM.
<b>BAPI_OBJCL_CREATE
BAPI_OBJCL_CHANGE
CLVF_INSERT_AUSP
CLVF_UPDATE_AUSP
CLVF_VB_INSERT_CLASSIFICATION</b>
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Is there a BTE for MM01 or MM02? I would like to capture the changes to data on these transactions when user has pressed the save button and also after the dB COMMIT is executed.
So far in my search, I have found that there is no BTE for Material master data transactions. I want to confirm this with other users. Also, is there a BAdI that I could use?
TIA.Hi Shri ,
BTE mainly for FI transactions .
BADIs for MM
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_MATERIAL_OD
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATMAS_ALE_CR Change Data in MATMAS IDoc When Generating an IDoc
BADI_MATMAS_ALE_IN Change Data in MATMAS IDoc Before Posting
BADI_MATN1 BAdI for Conversion Exit MATN1
BADI_MATRIX_SORT Sorting of Matrix Axis Population
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
Regards
Prabhu -
Hi,
I am new to IDOC concept and need to transfer Equipment master from a SAP system to non SAP system.
please let me know the following:
1. Is there any standard message type and Idoc type available
for Equipment master ?? ( For example we have
MATMAS05 for material master)
2. Is there any standard transation available for equipment
trasfer???( For example BD10 for sending material)
3. Is change pointer facility available for equipment master??
If yes please provide me the details
ThanksHi Preethi
Please use LSMW in loading euipment master using the Basic type EQUIPMENT_CREATE01 and assign the source legacy file.You can use the message type EQUIPMENT_CHANGE01 to change it.See in WE02 BD87 the stus whether it has been posted or not.
Since your data would be going to non sap that means you have to create partner profile for outbound processing and also activate the port(WE21) for outbound processing.
If your client is intilligent enoough and also big than if it has an ETL tool than extraction from spreadsheet in the form of idoc would be much easier and would cut short the time consumed in writing large programs .However the business needs to have an existing legacy system and you try to convert data .
Please do revert back incase of any issues.
Regards
Somnath -
Creating MDM repository for Material Master Data
Hello MDM Gurus,
I am new to SAP MDM. I want to create MDM repository for Material Master. What I unddertand is, I can create repository using Bussiness Content shiped with MDM software. I will copy *.a2a file to archive folder of MDM server and unarchive repository. I have following question for you.
1. HOw do I use export maps and import maps which I found in Busines contenst\Material folder?
2. How do I use MDM Lookup Tables which is xml document in Busines contenst\Material folder?
3. Why is the use of MDMGX_55520_Material.txt file which I found in Busines contenst\Material folder?
4. What is the use of *.xsd files and how can I use them?
Thanks,
BhupeshHi Bhupesh
1. HOw do I use export maps and import maps which I found in Busines contenst\Material folder?
save all the map files on your loacl machine. open import manager and select file-> Import, browse to the .map file and save the map with a meaningful name. now next time connect to the source file you want to import and OPEN the map saved.
2. How do I use MDM Lookup Tables which is xml document in Busines contenst\Material folder?
Businees content contains the standard ECC refernce tables like countries, regions etc which can be refreshed from ECC. for this you have to configure MDMGX, defining all the ports in MDM and in ECC the tables from which data has to be refreshed. refer to below threads for details.
Extract Data usnig MDMGX
How to Export Materials from ERP to MDM 7.1 via MDMGX?
3. Why is the use of MDMGX_55520_Material.txt file which I found in Busines contenst\Material folder?
This helps us in configuring the table extraction from ECC, refer to thread-> Extract Data usnig MDMGX
4. What is the use of *.xsd files and how can I use them?
Schema files are used for syndicating the records from MDM to source system. Say we want to syndicate material master from MDM to ECC and in ECC they will be posted via MATMAS05 IDoc. these schemas are the structure of IDoc which will contain the values which will be syndicated from MDM.
Let me know if you know some more details.
regards
Ravi -
LSMW for material master upload
Hi gurus
i have one problem while uploading material master with LSMW.
I have murged 2 company codes in one so while creating material master system is asking me tax classification data in sales view for 2 country sales org and distrubition channel. I am using sap std LSMW for material master creation.
system is giving me error as " tax classification data not maintained completely".
need your valuable help to solve this problemTax classification data is mandatory field in Sales view of MM01.
Check out you mapping for the tax classification fields. usually classification value is 0 OR 1.
You can first test the values in MM01 Sales View with the legacy data you have and this way you will able to find the mandatory fields also and can see the valid values for the fields.
Remember you may have more than one Tax Classification values depending on the country code.
For that you can add those many columns in legacy data file and map them.
Hope it helps. -
User Exit or BADI for Material master
When save in MM1 or MM02, we need a user exit or Badi to <u><b>get ECM data</b></u> (which is saved in AENR or AEOI table). Please help for this.
Hi Krishna,
Enhancement/ Business Add-in Description
Enhancement
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Business Add-in
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
o.of Exits: 3
o.of BADis: 11
These ar ethe avilable exits and badis.
Rgds,
P.Naganjana Reddy -
Hi Experts,
The requirement is to receive a standard Idoc for material change and trigger the material creation process in case the material does not exist.
Secondly, what is the Idoc for material change?
Thanks and Regards,
RaviHi,
Go through the following Steps for Creating IDoc Via ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error.
hope this helps you.
plz reward if useful.
thanks,
dhanashri.
Maybe you are looking for
-
ITunes (Coverflow) using A LOT of resources
So, after installing Leopard and using iTunes v7.5.19, I noticed a much slower computer when doing anything with iTunes open. I typically use Coverflow with no problems. In Activity Monitor, with Coverflow enabled, no music playing, iTunes uses ~75-8
-
Is it possible to have one plugable mapping combining 2 other plug.map.
hi, Using OWB10gR2 is it possible to combine 2 existing plugable mappings in one new plugable mapping. I tried it out but always got an java error (index out of bound) when trying to do so. Thanks for any input. Maurice
-
Hi Experts, I have a doubt in GP Input Data Form callable object. When i insert a callable object of type "Data Input Form" and test it. It should display Input box and a button only. But i'm getting "Edit/View Attributes Values" and below i'm gettin
-
Broken Java Stored Procedure Demo
The link to download HotelBookingsSample.jar does not work. It is located on http://otn.oracle.com/sample_code/tech/java/jsp/samples/jsptrigger/Readme.html
-
My Lumia 900 rattles when it vibrates. Can it be ...
I have already exchanged my white Lumia 900 multiple times for other more serious issues that the rattle, and do not want to exchange it anymore. (There is no full backup for the Lumia 900 and reloading all the apps, app data, and settings is gettin