Classification View in MMR
Hi
What is the use of the classification view of MMR?
Under what scenarios do we use it?
What settings have to be done in SPRO with respect to this view?
Regards
Syed
Hi,
Classification is used to classify the materials.The Classification is used to for Variant Configuration with Configurable material.
For this we define :
1.Characteristics.2.Class.3.Configuration profile where the class is assigned to material master in Classification. from where we can have access to the characteristics of the material.
Ex : You want to buy a PC with Keyboard,Mouse,Monitor,CPU etc..
say u want Monitor of 15" or 17" or you want CPU of 60GB, 180GB etc....
the 15' n 17" 180GB,60GB are defined as characteristics and assigned to class.This class is assigned to material master in Classification .This helps to configure material as per customer requirement..
I hope you got the concept....
Regards,
Smitha.
Similar Messages
-
"Inconsistent" tab appearing in Classification View of MMR
Hi all,
We are maintaining different characteristics in Classification view of MMR. when we are changing the value of characteristic through a program we are getting a new tab "Inconsistence".
Can someone please throw a light on this as to why this tab is appearing and how it could be resolved?
Thanks
Sonuhttp://help.sap.com/erp2005_ehp_04/helpdata/En/24/47665a416711d189ec0000e81ddfac/content.htm
-
Creation of Classification View in Material Master
Hi,
I need to create Classification View for a Material. The user would provide the data in the file, example
Material Number MATNR
Class type TCLA-KLART
Class Type description TCLAT-ARTXT
Class Group TCLG-KLAGR
Class Group Description TCLGT-KTEXT
Class M_CLASB-CLASS
Class Description M_CLASB-CSCHG
Status RMCLF-STATU
Std class RMCLF-STDCL
Characteristics Group TCMG-ATKLA
Characteristics Group Description TCMGT-ATKLT
Characteristics RCTAV-ATNAM
Characteristics Description CABNT-ATBEZ
I read in the posts there is BAPI_OBJCL_CREATE. But I am not able to Map the above fields to pass to this BAPI.
Can someone please suggest me how to do this..
Thanks and Regards,
VanessaHi,
Thanks for the suggestion. But i want to do this through a program. There is a selection screen with 6 radio buttons based o view to be created and an input field for the filename.
Could you provide me any BAPI to do the same.
Thanks and Regards,
Vanessa -
How to get the values inputted by the user in Classification view of MM02
Hello,
Does anyone know how to get the inputted values in Classification view of MM02/MM01? I tried to use CLAF_CLASSIFICATION_OF_OBJECTS but this gets the values that is currently saved in the tables and not the values that the user recently inputted in the screen.
Regards,
Alfredhi
try this...
How to Display the Batch Characteristics in BOM? -
Report: Classification view of material master
Hi,
We have activated Batch management for materials.
But for certain material codes, users have not maintained the Classification view.
Is there any report by which we can knowu2019 whether classification view for the material have been maintained or not?Hi,
Check with MM50 with Maintenance status as C
Regards,
Biju K -
How to update/open Classification view of Batch in production Order
Hi All,
I have maintained the Class (023) and characterstics for Finished Material. When I am creating the production order, I am assigning new batch number in Production Order Header (Goods Receipt Tab).
In the background system is creating the Batch but not updating/opening the Classification view.
Every time I required to go T code MSC2N and required to open the classification view manually.
How to open the classification view during production order creation?
Thanks,
ShailendraHi,
You can only assign the Batch number in the production order, that meanas the said batch will get blocked and will not get saved in the Data base. You can enter the Batch number in the Production order and a while doing the GR you can make the system prompt the Classification view in the for ground so that you can enter the Characteristic values..
For the above to pop-up you need to enter the Value "3" in the Batch Classification field of the Production Scheduling profile created for the Plant in the Tcode : OPKP.
Please read the below information for additional inputs :
Option to classify batches
Specifies that the system branches to batch classification upon a goods movement or when you create or change a batch (not in the material master).
Use
If a batch is classified during a certain transaction or event, you can then use the batch determination facility to search for batches by class characteristics at the time of goods issue.
Procedure
If you work with batch classification, set this indicator for all receipt-specific movement types so that all existing batches are classified.
Hope this will help you.
regards
radhak mk -
Create a classification view over bapi
Hello,
i start a vb Programm to create a material in sap.
I get all views with material_savedata but the classification view is missing.
Does anybody know if there exist a special bapi to create a classification view
over the .net connector ?
thanks for any helpHello , thanks a lot for the answers. I am using a vb programm with the proxy connector.
In this connector i have defined:
Dim oClassnum As String
Dim oClasstype As String
Dim oKeydatum As String
Dim oLanguage As String
Dim oObjectkey As String
Dim oObjecttable As String
Dim oUnvaluated_char As String
Dim oStandardklasse As String
Dim oStatus As String
Dim oAllocvaluechar As New BAPI1003_ALLOC_VALUES_CHARTable
Dim oAllocvaluecurr As New BAPI1003_ALLOC_VALUES_CURRTable
Dim oAllocvaluesnum As New BAPI1003_ALLOC_VALUES_NUMTable
Dim oReturn0 As New BAPIRET2Table
Try
oProxy.Bapi_Objcl_Getdetail(oClassnum, oClasstype, oKeydatum, _
oLanguage, _
oObjectkey, oObjecttable, oUnvaluated_char, oStandardklasse, _
oStatus, oAllocvaluechar, _
oAllocvaluecurr, oAllocvaluesnum, oReturn0)
MsgBox(oReturn0.Item(0).Message.ToString)
Catch ex As Exception
MsgBox(ex.ToString)
End Try
When i start the programm i get the error:
The function OBJECT_CHECK_ does not exist.
WHY ??
I have also tried to use
Bapi_Charact_Getdetail
to test, if something works but i really do'nt know what the meaning of
the parameters are . Perhaps somebody can explain them to me.
I have tried with charactername and used a * but the result is always 0.
Has somebody a documentation of the fields and tables that are
needed or filled or a little example of the us of the classification.
thanks a lot -
How to add classification view using BAPI_MATERIAL_SAVEDATA
Hi,
Please any one let me know how to add classification view using BAPI_MATERIAL_SAVEDATA to the material master.
Thanks,
shekarWe use this bapi on a regular basis as well as classification of materials. We have success doing this in 2 steps. First step is to save the material using BAPI_MATERIAL_SAVEDATA, second step is to save classification using BAPI_OBJCL_CHANGE (this can be used for both create and change) Also look at Function Group CLBPA . there are several bapi's in that group dealing with object classification, including the one I mentioned..
-
Error:While creation of Classification view using-'BAPI_OBJCL_CREATE'
Hi all,
I am using function module -
CALL FUNCTION 'BAPI_OBJCL_CREATE'
EXPORTING
OBJECTKEYNEW = OBJECTKEYNEW1
OBJECTTABLENEW = 'MARA'
CLASSNUMNEW = CLASSNUMNEW1
CLASSTYPENEW = CLASSTYPENEW1
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUM =
ALLOCVALUESCHAR = ALLOCVALUESCHAR1
ALLOCVALUESCURR =
RETURN = RETURN1
for creation of classification of material.But it gives me afollowin errors -
1)Assignment does not exist or is not valid on
2)Table not supported for class type
3)Assignment was not created
in return table.
Thanks.Hi,
Please follow the below steps.
Creating the Classification View using the Function module 'BAPI_OBJCL_CREATE'.
Check the Class Type and Class Number which you are passing.
Generally it will be Class type - 001 (Material Class) and Number will be ENGINEERING.
It depends.
But, what you can do is, Check material which has classification data filled.
And just use the same class Type and Class Number Details.
Try this way.It should work.
To know the Available Class Types refer to table TCLA.
Please let me know, if you want further help.
Thanks & Regards,
Vamsi. -
Creation of classification view in mm01
Hi Friends,
I want to create classification view for Tran: mm01 , What bapi should iused.
Thanks,
AshaBAPI_OBJCL_CREATE / BAPI_OBJCL_CHANGE
regrd
anjali -
Classification view creation via LSMW for Material master
Hi,
We are planning to have an LSMW for creation of material master along with classification view for configurable materials.
Though we see a flag to indicate classification view - XEIC1 Indicator: take Classification view into account
We do not see a structure where in we can pass all the characteristics and the corresponding values.
Is this something possible only with BAPIs such as -> BAPI_OBJCL_CREATE after creation of other view for that material.
Regards,
HRHi,
Thanks for the response. This is helpful.
However, we were intending to use a single LSMW for creation of all views of material master including classification view. Right now we are using Program RMDATIND as direct input method in LSMW.
Please let me know if there is a way to use single LSMW for creation of all views of material master.
Thanks
HR
Edited by: Hema Rao on Jan 8, 2009 7:58 AM -
Classification View in customer master using lsmw
Hi folks,
I have a requirement regarding conversion method that is fields regarding classification view in customer master needed to be populated r created in through xd01 transaction this should be done using lsmw tool,if tried with standard method and bapi method ,can any one tell how to do whether it is bapi r standard method plz dont suggest recording method,even it is idoc method k r can any tell me which function module exists fr this ,POINTS will be awrded for answers .Try FM : SD_CUSTOMER_MAINTAIN_ALL
Thanks
Seshu -
Merging Basic data View and Classification View in Material Master
Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar BaddelaHi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT -
Purpose of maintaining classification view in material master
Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang -
Data for Classification View in Material Master
Dear all,
Can someone tell where the data for classification view is stored ??
We are running a BDC and need to check whether classification view is maintained or not ??
Thanks in Advance
Regards,
Vivek KHi,
Check the table MARA, there is a Field VPSTA. in this field the Material views will be stores with single charecters. so check for the Clasification view charecter
also it's PSTAT in MARA and MARC.
Work scheduling A
Accounting B
<b>Classification C</b>
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
Regards
Sudheer
Message was edited by:
Sudheer Junnuthula
Maybe you are looking for
-
Can't connect PHP/MySQL 404 error
Wow, the learning curve is killing me. Yet another challenge. I'm using Dreamweaver CC and this tutorial http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html I'm at this step: Open comments.php. You must have a PHP page open in the Documen
-
X220 Problems after upgrade to Win 8 Pro
Hi all, Two weeks ago I upgraded OS on my ThinkPad X220 (model 428759G, BIOS 1.37) to Windows 8 Pro X64. After upgrade I did “factory reset” (function of Windows 8), because I preferred clean installation. Then there were installed all updates via W
-
How can I move photos in Albums into Cameral Roll?
I reinstalled Lion OS X but I forgot to back up photos. Is there any way to save them in iPhoto or in my Macbook?
-
Memory errors and software detection
I have the 645EMax2 and admittedly, have a power supply issue in the process of resolution. However, I have two 512mb ddr 333mhz memory sticks from Seitec. I did a scan with DocMemory and Memtest86. Both gave errors at 485mb. I swapped them round and
-
I have 10.4.11 - where do I get 10.5?
help!