CLASSIFICATION VIEW / MATERIAL MASTER

HI EXPERTS,
I am facing a problem regarding classification view of a material master.
In my organisation for a perticular material type I have to maintain CLASSIFICATION view. But by mistake I forgot to maintain classification view of some material.
There are more than 1000 material , so it is not possible to check each material individually and if classification view is not maintained that I have to maintain it.
Kindly reply me with some standrad method, so that I will check for which material classification view is maintained or not. According to that I will proceed.
Regards.
raghu.

MM50 is the way.
If you didn't add the classification for a material then you have to extend the material with the classification view. If you enter Maintenance Status C and your material type, it will lsit all materials that DO NOT have a classification view created.
If however, you created the classification view, but didn't enter one of classification values, this will not help. You could try the tools in Classification System --> Environment -->Reporting.
Rgds
Richard

Similar Messages

How to Change Batch Classification of material master

Hi,
How to Change Batch Classification of material master in a production system,Pl note that there is no stock and no open qty still system is not allowing me to delete the old Classification and add my new classification.
Guys any solution for this.
Thanks in advance
rgds
bijaya pradhan

I believe there is a FM VB_CHANGE_BATCH for this, any body tried this FM?

Classification in Material Master

Hi All,
I have to create two characteristics A and B for maintaining in the classification view of the material master.
Some of the sample values for these parameters are as given below.
for A -
1) -6-4/6-4/8
2) 0,27kg/m2
3) 7X10
4) 8x5,9
5) 16O-8
6) 112 Fotm
7) 112 HP
8) 112+1
9) ADTRANZ
10) INTEGRAL
11) T=0,38 B=21
12) -591593
for B;
1) +474,6,7
2) 0,55/0,w
3) 3GZS443H
4) Etik: ME
5) Etik: TV
6) FERT
7) FIMOT
8) L3=458
9) L3=462
10) Rör ej !
11) 3681
12) 11111
Please can someone tell me how to create characteristics for these two parameters and what should be the class type (Material class?).
Regards,
V S

Use CL02 tocde to create the class for class type 001
Than create the characteristics using tcode CT04 and create two char.
one for A and second for B
than after saving the charteristics
go back in change mode and enter the value on value tab of characteristics
than assign this class to material.

Check change in classification of Material master

Hi all,
How & where can we check changes done in classification view of Material master like changes in characteristic's values etc.
Thanks

changes in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
maybe it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system

Old material number - Field in Basic Data 1 View Material Master

Hai Techies,
We have a field called old material number - MARA-BISMT in material master basic data 1 view. Is that field is just for reference of old material or does it have any effects in the SAP MM when using the material for purchasing or in BOM or so on.
Could any one please highlight me the consequences of using this field to refer a old material number for the new number created.
Thanking you in advance.
Regards,
Kris.S

Hello Kris,
Number under which you have managed the material so far or still manage it,
for example, in another system or in a card index.
You can use the old material number to systematically search for material
master records via matchcodes.
Your understanding for the use of this field is correct.
regards
Ray

Work scheduling view-material master

Hi, wht is meant by lot size depenedent parameters and lot size independent parametrs? how to use that data in manufacturing industry? pls advise.

Dear Yadav,
case1: If you have maintained the Inhouse production time for any product in the MRP2 view,this get's automatically reflected
in Work scheduling view as lot size independent Inhouse production time.
At this point if basic scheduling is carried out during MRP then the date calculation will be based upon this number of days
irrespective of the order quantity.
case2:Once after maintaining the operation timings in the routing,you can update the same using CA97,for the relevant task list
type ,group and group counter no and include the check box for update material master directly,you can find the timings
maintained on hour basis in the setup,processing and inter operation (This calculation is based on the timings maintained in the
routing and also your work center capacity details,like the number of hours this capacity will be available for a day).
Once after performing this,even if you have maintained the inhouse production time in days,that value gets removed.
This time will be considered for basic scheduling purpose during MRP.
So in my understanding this will be helpful during the scheduling purpose for the date calculation.
Check and revert back with your further queries.
Regards
Mangalraj.S

Views material master.

Hi,
where can I find all possible views for material master?
What is the table containing the material master views?
Best regards

Hi
You can find in the table MARA. Field PSTAT contains list views extended. for more information press F1 on the field PSTAT.
regards
Srinivas

Use of tax classification in material master

use of tax classification in material master

Hi
The indicator with which the system determines output tax for the material when processing sales and distribution-specific documents.
Generally it is done Country-wise. Like for one country No tax is applicable, for other country Full tax applicable.
Thanks
Prashanth

Procurement Type in MRP2 view - material master - configuration?

for the life of me, i cannot find how to configure this field. does anyone have any knowledge how to configure this field to have more options from a material type standpoint?
for example, if i use a VERP material type, i want to have the ability to choose in house (E) or external (F) procurement.
thanks in advance.

HI,
SPRO > Logistics - General > Material Master > Basic Setting > Material Types > Define Atrributes of Material Types.
Choose the desired material type > double click > on 'Internal/external purchase order' tab (section) please set '2' (or '1') for both external and internal PO.
BR
Csaba
Edited by: Csaba Szommer on Jul 10, 2008 5:36 PM

Changing classifications of material master data and reporting

Hello experts,
I have to update long list of material's classifications, I know about the transaction CL24N but in this
one, I have to assign a material to the class and then for each material update the value of the wanted
parameter.
My questions are :
1. Is there any better way to do this massive update ?
2. Is there any standart report on classifications values for all materials ?
Kind Regards,
Amit Berku

Hi Amit,
You can look for the Report RCCLBI03 (this Report loads the File). This is the fastest way to load classifications.
You can also use BAPI 'BAPI_OBJCL_CREATE' or write a batch input program, but my advice would be go to for Standard Report if this does not solve your problem then use BAPI and the third option would be to use Batch Input program.
Hope this helps you!
Reetesh

QM view material master (Inspection Type)

Hi there,
 I didn't understood the pragmatic usage of the check box inspection by configuration & inspection by characteristics.......that can be set for the inspection types..........
Please enlighten me ......
Thanks
Kaushik
Message was edited by:
 Kaushik Choudhury

If you set this indicator, the system takes the configurations from the sales or production order into account when inspection lots are created and changes or supplements the inspection specifications in the task list or material specification.
The indicator only works for the following inspection lot origins:
o 01 Goods recipt for purchase order
o 03 Production
o 04 Goods receipt for production order
The indicator cannot be used for the inspection lot origins 10 and 11.
Example
When creating the sales order, the customer defines that the pH value of the product to be manufactured should be between 5.0 and 5.5. When an inspection lot is created for the resulting production order, this tolerance is then copied into the inspection.
Dependencies
The specifications are only copied into the inspection lot if there is a link between the class characteristic and a master inspection characteristic.
Hope this helps you.

With out accouting view material master

hi,
i wmt to creat a materail master with out accounting view. while doing gr how system generates the accounting documents. tell me step by step procedure.
Regards,
Sydanna

Hi
Accounting view mainteance is avoided for the non-valuated materials.
Such case, while creating PO, u need to assign account.
So during GR, system will post accounting doc for Dr to consumption account(which is specified in PO) and Cr to GR/IR account.
If u have not maintained accounting view for other than UNBW, during PO creation system checks for account assignement.
warm regards
sairam akundi

No value in the classification of material master data

Hi:
When I am going to assign the value into the class of batch type 023,and I found there is no value for me to choose,how add the value of class in customziation?

Hi
This will help you for config setting:
Logistics general - Batch Management
1.1. Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
1.2. Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
1.3. Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
1.4. Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
1.5. Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
1.6. Batch Determination u2013 Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
1.7. Batch Determination u2013 Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
1.8. Batch Determination u2013 Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
1.9. Batch Determination u2013 Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
1.10. Batch Determination u2013 Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
1.11. Batch Determination u2013 Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
1.12. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
1.13. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
1.14. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
1.15. Batch Determination u2013 Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
1.16. Batch Determination u2013 Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
1.17. Batch Determination u2013 Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
1.18. Batch Determination u2013 Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
1.19. Batch Determination u2013 Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
1.20. Batch Determination u2013 Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
1.21. Batch Determination u2013 Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
Regards
ram

Purpose of maintaining classification view in material master

Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...

Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang

Disabling Material Master Classification

Hello,
We have a requirement where we will disable the user going into material classification screen while creating or changing the material master based on authorization object. As we know, the material master transaction will switch to classification transactions in this process. We looked into various user exits and enhancement spots where we can put our code, but we were not successful. We anticipate your help on this issue.
Thanks in advance,
Christian

Hi Christian,
Your requirement is to restrict certain users to change or create the classification in material master. (If i have understood it correctly then...) the solution is to control it through authorizations.
The Authorization object is M_MATE_STA. If the field STATM in this object has a value C included then those profiles/users will have authorization for Classification view and others wont.
Your SAP security Admin should be able to hel[p you with this. By doing so you would have no need to control it using User exits or enhancements.
Regards,
Kathir

CLASSIFICATION VIEW / MATERIAL MASTER

Similar Messages

Maybe you are looking for