Claws mail with another program to fetch email

Hi, I'm an Arch Linux user since a few weeks ago So, excuse me if I'm posting this question in the wrong place.
So far so good, but today I've installed Claws mail and noticed that it lacks support for basic IMAP notification, i.e. push email. Fiddling with the options I've found that Claws can delegate the email fetching to another application and be a mere frontend.
So, would it be possible to install a minimal email client (ideally with no GUI at all) with full IMAP support that cooperates with Claws? I know, I could even install Evolution or Thunderbird, but I'm trying the non obvious way
Many thanks!

Thanks ewigkeit for bringing up Mailnag into the conversation
Can it move emails to folders based on filtering rules? To not lose this feature I consider critical, I was thinking if this scenario could be possible:
Mailnag monitors the inbox folders of two IMAP accounts > When new email arrives it executes the command claws-mail --receive name-of-account > Claws Mail do all its stuff, including filters, pre and post processing and the like.
If it's not possible in Mailnag execute different commands for each account, we could go with claws-mail --receive-all. In fact, Claws is apparently ignoring the name passed as argument and fetches email for each and every account. Maybe because of a problem parsing names like [email protected] I'm not sure...

Similar Messages

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

The hotkey for Private Browsing ( CTRL Shift P ) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

Question:
The hotkey for Private Browsing (<CTRL><Shift> <P>) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

You can try this extension:
*Customizable Shortcuts: https://addons.mozilla.org/firefox/addon/customizable-shortcuts/

Cannot instal xorg files - Conflict with another program.

I have a new install and set up my wireless, got pacman working good but there are a couple things that are not working. 1-cannot install powerpill, it just does not find it when i try to download it. 2 when I try to download xorg files it says there is a conflict with another program (not near my comp right now so i dont have the name of the program, i will post it later). I am more worried about getting xorg set up than powerpill. does anyone have any ideas? i am set up for fastest mirror and ran the pacman -Syu to update everything yesterday...

I am trying to install everything under xorg that comes up when you type pacman -S xorg. the error itself says that it conflicts with another program when i try to download it. it says do i want to remove program "x" but does both options still will not download. I will get the full info tonight.

Buning itunes music with another program?

Is there anyway I can burn itunes downloaded music with another program since itunes want let me burn cd's

THIS IS A BOARD OF PEOPLE WHO RANT ABOUT APPLE'S SHOTTY PRODUCTS!
That's not the purpose at all, but if you really think that's why you are here, you will likely continue to have trouble finding help.
If you really want to get help, you would do as several people have suggested, and post your iTunes version, iPod version, exact steps you have taken, and the results of each step. That's what will allow people to give meaningful help.

How to determine the difference between a user sent mail and an auto-sent mail by another program?

Hi,
I am currently capturing the item_send event in an Outlook (2010/13) addin which then processes the email before it sends. Will this event fire for an email that is generated and sent automatically, i.e. without the user clicking the send button? For
example there may be another addin installed that emails hourly logs somewhere, or gives the user an option click another button to send a generated email to their support team.
Ideally, I would like my addin code in the item_send event to only run when the user has purposely sent the email themselves from a draft email by clicking the send button.
Thanks in advance,
Tom

I see the following idMso value in the Office 2013 Help Files: Office Fluent User Interface Control Identifiers files:
SendDefault
button
None (Core Tab)
TabNewMailMessage
GroupSend
2617
The <commands> section should be placed in the ribbon XML with your custom UI. See Temporarily
Repurpose Commands on the Office Fluent Ribbon for more information in the MSDN documentation.

Can you retrieve BB Protect data with another program?

Can you download your Blackberry Protect date (ie. Address book) to another program? I want to get my contact info but I no longer have a cell phone.

Hi Thomas,
Thanks for the info. Based on my experiments, that's the conclusion I had come to as well, but it's good to get confirmation.
My work around is to break every TX transaction into small pieces. The NI 8452 supports streaming sample sizes of up to 64 bits (8 bytes). I can make a transaction that is one sample long with "samples" of 4, 6, or 8 bytes, as needed. Continuing my original example, I can do this:
NumBytes = 8;
ni845xSpiStreamConfigurationSetNumBits(StreamHandle, 8 * NumBytes);
ni845xSpiStreamConfigurationSetNumSamples(StreamHandle, 1);
ni845xSpiStreamConfigurationWave1SetMosiData(StreamHandle, WriteData, NumBytes);
ni845xSpiStreamStart(DeviceHandle, StreamHandle);
And I see this transmitted:
0x0102030405060708
You can repeat the SetMosiData and StreamStart steps for each additional block of TX bytes.
I would like to use the ni845xSpiWriteRead() function (that would be much easier), but that doesn't work with the broken pre-production SPI slave I need to talk to. (We will fix it, but I need to work around the problems for today). I need to generate a very small delay at the end of the transaction between when the serial clock stops and when CS deasserts, or else my transaction is ignored. I measured the delay between SPC deassertion and CS deassertion produced by ni845xSpiWriteRead() at 1.19 us. In order to talk to my broken SPI slave, I need a much shorter delay, on the order of one SPI clock period.
So yes, I hope to upgrade to the basic SpiWriteRead function in the future, but I can't use it today.
Thanks for your help.
-jskroch

When Firefox in minimized and I'm working with another program, why does it automatically maximize (pop up) every 10 minutes?

I'm using Windows 7 and Firefox 8.0.1 on a PC. This is frustrating. I like Firefox, but it keeps popping up every 10 minutes when it's minimized and I'm working in another program. I can't continue to use it if this can't be fixed. I just switched from 3.6 and never had any problems. Also, no settings have been changed.

Great suggestion! It looks like one problem has been solved. I started Firefox in safe mode and the problem didn't occur. Then I restarted in regular mode and individually disabled one add-on at a time. What I found is that with Better Privacy disabled, the pop-up no longer occurred. So step one, identifying the source of the problem, is complete. Now onto step two, finding out what setting in Better Privacy is causing the problem. There's nothing that stands out to me as the culprit. Any ideas? Thanks again!

Is there a way to import my STD quality video without converting it with another program?

I understand how to import the HD quality video through imovie, but cannot seem to import the STD quality video without first converting it through another program? Anyone know how to do it without the cumbersome converting process? Thanks.

What kind of camcorder did you use to shoot the video?
If you aren't sure, will the STD quality video play in QuickTime Player? If so, click Command-I to open the Inspector and tell us everything listed by the word FORMAT: as well as the dimensions of the clip. (Instead of Command-I you could alternatively click WINDOW/INSPECTOR.)

Mail with another email account

Is there any way to get my Yahoo! mail account to work with Mail on my Mac?

Mail and Address book

Mac mail on desktop reaaly slow fetching emails

i have another mail account for my wife with .mac and for some reason on her mini mac is very very slow bringing in emails... if i go to activity viewr its seems to take ages downloading mail, tranering mailboxes and syncing etc.. and i mean slowwww. she only has 52 e-mails in her box... any ideas?

Solved the mystery. I just wasn't seeing it before. The contact info on two different contacts was somehow, accidentally altered to include my .mac email as their work email. Since they came before me in the address book, they showed up under their home email address. I removed the errant email info and the problem was solved.
thanks anyway

Editing dw pages with another program

Clients that I design websites for want the capability to do
simple updates to their websites themselves. I could teach them how
to use dreamweaver for that, but they can't afford to buy it. What
free or inexpensive programs can I suggest to them to do this with?
Are their any other programs that have an interface like dw, so
they don't have to do straight html editing? If they do straight
html editing what program would be good for that?
thanks for your help.

Depending on the type of edits they want to make, you may
find
http://www.contentseed.com to
be an easier choice.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ken Binney" <[email protected]> wrote
in message
news:f28dkk$at5$[email protected]..
> Adobe/Macromedia "Contribute"
> (USD $149 I believe)
>
>
> "flutterbye11" <[email protected]>
wrote in message
> news:f2896r$6be$[email protected]..
>> Clients that I design websites for want the
capability to do simple
>> updates to
>> their websites themselves. I could teach them how to
use dreamweaver for
>> that,
>> but they can't afford to buy it. What free or
inexpensive programs can I
>> suggest to them to do this with? Are their any other
programs that have
>> an
>> interface like dw, so they don't have to do straight
html editing? If
>> they do
>> straight html editing what program would be good for
that?
>> thanks for your help.
>>
>
>

How to Rename a Topic ID in Map File to Avoid Conflict with Another Program?

Robo 8 HTML:
Can somebody assist me in understanding how to rename a topic ID in my map.h file?
An application programmer informs me there are nine topic IDs (shown below) in my project map file which conflict with predefined names of constants/functions from the Visual Studio Libs program and, is requesting I change the names of the topics listed below to resolve topic ID conflict in order to enable F1 call for these topics.
#define Open    59
#define Save    60
#define Print   63
#define Cut     72
#define Copy    73
#define Paste   74
#define Clear   75
#define Status 81
#define Substructure 139
Can I simply alter the topic names and retain their associated map numbers in <Create/Edit Map ID> dialog to resolve the map file conflict with Visual Studio Libs program functions? Or, is there more work involved in changing a topic name in a map.h file?
Any assistance with this question is greatly appreciated.
Thanks,
robert

Hi,
Simply renaming the TopicID's in the .h file won't work. The TopicID is used in the alias file (projectname.ali) to link a map number with a topic. Also, you can use either TopicID's or map numbers to call the help. (Using TopicID's only works for WebHelp afaik.)
If you use map numbers to call the help, you can rename the TopicID using the mentioned dialog. No problem.
If you want to change the ID from the files, you have to change both the .h file as the .ali file. No changes to topics needed.

Yahoo mail with foxfire-someone sent an email pic attach from iphone-how do I copy it as a jpeg and not as a download

I received an email (yahoo.mail) and a pic was in the body of the email and the email was sent from an iphone. When I try to copy the pic to my desk top it only copies as a download no matter which way I try to copy it. How do I copy the pic from the body of the email as a jpeg?

Click the image , hold your mouse button, drag it and bring it to Firefox window from task bar below and release it into the body of your e-mail.Works on Gmail, Yahoomail , Hotmail....May not work on other e-mail service providers.

Quicktime won't load - along with another program

Fairly new computer, programs already on machine work fine and load with no problem. I installed ULead VS 10+, installed no prob, but won't load. Switched to Adobe Premiere Elements 3.0, install fine, won't load. Downloaded the latest Quicktime, installed fine, won't load. Had my firewall/AV off when installing and trying to load. The weird thing is, I installed Abdobe Photoshop Elements 5.0 and it worked fine. Also installed Window Washer and it works fine. Trying to figure out if something on my machine is not allowing certain programs to load b/c of a Quicktime file?

Think I might've discovered part of the problem. I'm seeing a Quicktime for Windows (32 bit) under my Add/Remove Progams. Can't remove it there, tells me it can't find a current version of QT, if I have an older version I can use the QT installer to remove it. Tried using the windows uninstall through All Programs, but get same error message. Tried using Add/Remove to get rid of my current 7.1.3 version, but it comes up with a fatal error message. How can I remove the QT 32 bit and the QT 7.1.3? I think if I could get rid of all that and reinstall 7.1.3, that might solve my prob.
Dell Windows XP

Claws mail with another program to fetch email

Similar Messages

Maybe you are looking for