CLD electrical engineer looking for a work via Internet

Hello to all
Let
me introduce myself. I am an electrical engineer, with a more than
three years of full time experience in Labview programming.
I have a CLD certificate, which is valid until December 2013, with plans to upgrade to CLA.
My current place of work and living is in the Prague, Czech Republic, Europe.
My work responsibilities include work on many different projects and technologies and training for my colleagues.
On request, I can send you my CV.
Best regards
Bile

Dear mr. Bile
We are in the process of building a manufacturing plant run by a large number of servo motors, all to be controlled by LabView and connected to a SQl Azure database.
Do you have experience with servo motors and databases?
Are you available for some part-time work this winter?
Regards
Jørn Watvedt

Similar Messages

Chicago Based Labview Electrical Engineer Available for Remote Work

I work while you sleep
I have over 8 years experience in Labview including most recently; GPS route mapping, CDMA and GSM test systems, OFDM and FSK test systems, and standalone applications (details available upon request).
I'm looking for remote projects to work on in the evening to supplement my income and pay for all the expensive Christmas gifts. I am willing to do work at reasonable rates based on project goals. I have my MS in Electrical Engineering and over 8 years of digital hardware design experience as well as automation experience with Labview. I have pretty much automated every piece of test equipment that has crossed my path.
Full source code, documentation, flow diagram, etc. upon project completion! Labview 8.5, Windows XP
Regards,
Labview 4 You
Electrical Engineer, Labview Guru

This is a repost to show this thread is still active.
I have over 8 years experience in Labview including most recently; GPS route mapping, CDMA and GSM test systems, OFDM and FSK test systems, and standalone applications (details available upon request).
I'm looking for remote projects to work on in the evening to supplement my income. I am willing to do work at reasonable rates based on project goals. I have my MS in Electrical Engineering and over 8 years of digital hardware design experience as well as automation experience with Labview. I have automated almost every piece of test equipment that has crossed my path.
Full source code, documentation, flow diagram, etc. upon project completion! Labview 8.5, Windows XP
Regards,
Labview 4 You
Electrical Engineer, Labview Guru

Electrical Engineer looking for Job

ARCHANA BHALERAO
1025 University Avenue # 128, Sacramento, CA 95825. Phone No: 916-752-4429,
Email: [email protected]
CAREER OBJECTIVE
Seeking a position as Project Engineer where I can apply my hardware, and instrumentation knowledge and LabVIEW programming skills to challenging projects.
EDUCATION
Master of Science in Electrical and Electronic Engineering, California State University, Sacramento. (2004)
Bachelor of Science in Instrumentation Engineering, Pune University, India. (2000)
QUALIFICATIONS
* Hardware: PC-based instrumentation, GPIB, PXI and serial instrumentation, sensors, and signal wiring Analog/ Digital circuit design, testing, and troubleshooting Microcontroller-based Systems design, interface and programming
* Systems: Data Acquisition, Motion Control, Machine Vision and Image Analysis, Industrial Automation, SCADA Systems.
* Software Tools used: LabVIEW, TestStand, MATLAB, SIMULINK, ORCAD CAPTURE, and MS-Office.
CAREER EXPERIENCE
Research Assistant â Engineering and Computer Science Department, CSUS 2002âPresent
* LabVIEW Programming for Industrial Projects.
* Analog and Digital Circuits.
* Microcontroller-Based Systems.
* Motion Control and Vision Analysis.
Customer Support Engineer â Theta Controls, India (Alliance Member âNI, USA) 2001â2002
* System Design for Data Acquisition using LabVIEW.
* Providing technical support to customers.
Graduate Engineer (Maintenance Department) â Gabriel India Ltd, India. 2000â2001
* Preventive Maintenance and Automation Projects.
INDUSTRIAL PROJECTS:
PC Based System to Measure Surface Tension of a Liquid using Pendant Drop Method
* Use LabVIEW to control the motion of a Syringe connected to a Stepper Motor and Motion Controller Card.
* Use IMAQ Vision with LabVIEW to extract the x and y coordinates of a shape of a bubble.
* Develop a DLL to compile a code in C language and use it with LabVIEW.
UV Detector Project â Reflect Scientific, CA
* Interface signals from two photodiodes to a 12-bit A/D converter, interface keypad, LCD, A/D and a D/A converter to a microcontroller to read percent transmittance of a liquid passing through a liquid chromatograph.
* Develop an Application Program to calculate absorbance of a chemical using Beers Law.
* Develop a Datalogger using LabVIEW to log data from 3 channels of the UV Detector.
Microcontroller Based Prosthetic Arm Monitoring Device â Shriners Hospitals for Children, CA
* Interface signals from a force sensing resistor, electric motor and EMG sensors to a microcontroller to log the data related to usage of a prosthetic arm by a disabled child.
* Design the signal conditioning circuitry, and develop an Application Program.
PAPER PRESENTATIONS
* Microcontroller Based Prosthetic Arm Monitoring Device â Winner at the 18th Annual California State University Student Research Competition.
* Optical Fiber Amplifiers
* Mobile Intel Pentium M Processor
RELEVANT GRADUATE / UNDERGRADUATE COURSEWORK
Machine Vision, Advanced Robot Control, Artificial Intelligence, Process Control and Instrumentation, Micro Computer System Design, Advanced Digital Signal Processing, Fiber Optic Communication, Biomedical Instrumentation
PERSONAL SKILLS
Excellent written and verbal communication skills, quick learner, self motivated and positive attitude, demonstrated leadership skills, ability to work with a team as well as independently, experience in interacting with customers, experience in making technical presentations.

Hello Archana,
If you are now in India, you could write to me with your CV.
We are recruiting LV skills. My email id is [email protected]
If you are based elsewhere, check http://www.calbay.com/index.htm
I read that they are recruiting.
Another good option could be simply to goto google and search with "LabVIEW job" and such other combinations.
Goodluck!
- Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

CLD Certified Engineer Looking for Part Time Job

I am a Certified LabVIEW developer with around 3 Yrs of experience in developing LabVIEW based applications. I am currently working on Version 8.5. I have worked with Analog, Digital, GPIB, CAN, J1850 and Serial protocols. I have also worked on Non NI devices such as AB PLC controllers. I have developed small to complex standalone applications. Some of them were production in-line systems.
I can work in the evenings and during weekends. I can send my resume if needed.

I am interested in reviewing your resume. Please send to [email protected]

Electromechanical Engineer Looking for Interesting LabView telecomute work.

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

CLAD with MS in Electronics/Electrical engg looking for better opportunities

Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf ‏130 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

Labview engineer looking for job in china

I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
more detail please contact [email protected]

Hi Alec,
Your organisation sponsor visa for non-local residents?

Experienced LabVIEW Engineer looks for part time projects

Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

LabVIEW Engineer looking for job

I have attached my resume to review.
Attachments:
Resume.pdf ‏50 KB

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

Cannot Backup Encrypted Sony Xperia Z1 - Looking For a Work Around

Hi all,
Looking for help on how to backup my encrypted Sony Xperia Z1.
When i attempt to use Sony PC Companion, i get a backup error due to the encryption.
Anyone have a suggestion on an alternate means of backup?
Thanks heaps!

I have same issue with Z3 compact. So I have approached Sony support and they clain that this is not an error!.
Obviously this is an error, hence I am escalating this at Sony to provide procedure to backup encrypted phone.
There are a number of 3.party solutions available (even wo rooting), however these are of course not supported by Sony.
Currently I am using holo backup as a WA for making backup. This is *not* a complete backup, however it captures all user data.

Web dynpro abap application on Portal does not work via internet access.

Dear All,
I have created a web dynpro abap application and deployed the same on Portal.
The issue I am facing is that the webdynpro application works fine when the end user logs into Portal from Local Network,
However when the Portal is accessed from outside the local N/W via Internet, Portal is working fine for other applications like ESS
but the web dynpro application dont work.
Is this some configuration issue on the portal / abap development or any workaround is possible.
Regards
Abhinav Dagar

Hi
Please try to use the [HTTP Watch 5.0 Basic |http://www.httpwatch.com/download/] tool to trace that WD Application link from the portal and you can easily find out the problem.
Regards
Prakash T

Any idea how you can safely use ONE computer for BOTH work and internet?

I'm planning to set up a small music project studio, built around a powerbook, that I will be sharing with a friend of mine. My friend is going to use the computer for music AND heavy internet use, but I will only use it for music work (off-line).
The thing is then that I am slightly worried about viruses, worms, spyware and similar unwanted stuff 'sneaking in' when the laptop is online. Even with firewall and anti-virus I guess there is always a risk.
Any idea if there is a way of keeping things completely separate?
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Maybe we could even remove the internal hard drive from the powerbook (?), and use the powerbook with two external hard drives instead: One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Any idea if this would work well..? (I'm not sure if i.e. a virus could sneak in anyway, through the PRAM, L2 cache or the RAM or something similar) Or does anyone have any other suggestions...? Any ideas much appreciated. Thanks!

Not too much worry with Macs, but get an Ethernet Router, skip Wireless, use strong Passwords.
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Excellent idea, especially if the heavy Net user doesn't have Admin rights.
One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Just about foolproof! Just need 2 more drives for backup. Not sure why you'd want to remove the internal HD though.
No Viruses yet in OSX land, in fact the only Malware I know about requires you to install it for itself!
You'll be OK, that separate drives idea is pure genius.:-)
Most don't need it on Macs, but here ya go on the Mac side...
ClamXAV, free Virus scanner...
http://www.clamxav.com/
Little Snitch, stops/alerts outgoing stuff...
http://www.obdev.at/products/littlesnitch/index.html
HenWen/Snort combo, that is a free MAJOR Firewall...
http://seiryu.home.comcast.net/henwen.html
Then the venerable old Brickhoues/Flying Buttress Firewall...
http://personalpages.tds.net/~brian_hill/downloads.html
WaterRoof is a firewall management frontend with bandwidth tuning, NAT setup, port redirection, dynamic rules tracking, predefined rule sets, wizard, logs, statistics and other features.
http://www.macupdate.com/info.php/id/23317
Monitor net usage...
http://mac.softpedia.com/get/Dashboard-Widgets/Information/Videotron-Internet-Us age-Monitor.shtml

SCM collaborative portal not working via Internet BUT wo

I am working on Collaborate planning in APO (SCM) - sharing SCM planning books over internet so that collaborators (customers) can access our data. I enabled all the required services using SICF and published services using SE80.
Portal works correctly in Intranet (with in our network), But doesnot work in Internet, link/url doesn't not bring up log on screen and get error no page found.
We are on SCM5.0 (Netwaver 7.0) and using integrated ITS.
What other settings required to access through internet?
Thanks in advance,
Niranjan

Hi
We have traced the http request using httplook. We noticed that the Content-length is not being sent for requests which go through http proxy. All other web sites set the content length and hence the keep-alive remains true. In our case we feel that because the content-length is not been sent , the keep-alive is false and hence we get a connection close through the proxy server
Are there any setting on IIS which we need to do ?
HTTP/1.0 200 OK
Server: SAP J2EE Engine/6.40
Content-Type: text/html; charset=UTF-8
Content-Language: en-US
Content-Encoding: gzip
Date: Mon, 25 Apr 2005 06:31:33 GMT
Set-Cookie: PortalAlias=portal; Path=/
X-Cache: MISS from ttlftp.pune.telco.co.in
Proxy-Connection: close
Regards
Jayesh

Setting for 'Connect Oracle Via Internet'

I want to connect my oracle server 10g via internet by creating service using static/dynamic IP

piyukharwar wrote:
I want to connect my oracle server 10g via internet by creating service using static/dynamic IPThis is no different than normal LAN IP connectivity. IP is IP - whether over a LAN, WAN of the Internet. The client IP needs connectivity to the server IP. Ther server IP needs to be able to respond to the client IP.
There are certain restrictions though - such as private IP address ranges that are not supported and routed on the Internet.
If you for example use such an IP address for your database service, you will need to enable NAT firewalling on your Internet router - allowing for example connections from the net to your router's tcp port 1521, where the router will NAT these to your database server (running a private IP) on port 1521.
Word of warning though - usually not a good idea to expose your database directly to the Internet. You need to harden the Listener and the database if you want to do this in a safe and secure manner. And consider using encrypted IP connectivity for running OCI client-server connections across.

CLD/Electronics Technician looking for work in Utah.

I am an electronics technician and have recently received my CLD certification. Please see attached resume.
Attachments:
2013 Resume.docx ‏38 KB

I mean this as constructive criticism. If you want a job programming using LabVIEW then you should make sure you spell LabVIEW correctly. In your resume you list it as Lab View instead of the correct usage, LabVIEW. This may seem like a small thing but I'm not sure I'd hire you with a glaring mistake like that on your resume. The devil is in the details and I wouldn't want you to miss an opportunity because of a small thing like that.
Kelly Bersch
Certified LabVIEW Developer
Kudos are always welcome

CLD electrical engineer looking for a work via Internet

Similar Messages

Maybe you are looking for