CLD/Electronics Technician looking for work in Utah.

I am an electronics technician and have recently received my CLD certification. Please see attached resume.
Attachments:
2013 Resume.docx ‏38 KB

I mean this as constructive criticism. If you want a job programming using LabVIEW then you should make sure you spell LabVIEW correctly. In your resume you list it as Lab View instead of the correct usage, LabVIEW. This may seem like a small thing but I'm not sure I'd hire you with a glaring mistake like that on your resume. The devil is in the details and I wouldn't want you to miss an opportunity because of a small thing like that.
Kelly Bersch
Certified LabVIEW Developer
Kudos are always welcome

Similar Messages

LabVIEW CLAD Certified looking for work in Southern California

Hey guys,
I'm a recent graduate from UCLA with a BS in Material Science and Engineering. I have been using LabVIEW for about a year now and got CLAD certified in June. I really enjoy working with the software and I have experience with some hardware (myDAQ). Looking for a position near Los Angeles but I'm pretty flexible.

Hello, I saw that you were looking for work in southern california. Here is a job posting for my company and I would be interested in meeting with you this week if you are still looking.
Thank you, Daniel Rust
Executive Establishment Officer
626-616-7717
[email protected]
Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com

This is the thread for folks looking for work.

And unfortunately, as of next Friday, I will be in urgent need of work. I found out this week that my contract has been cut. :-( I have experience in help desk, technical training, IT management, systems administration, project management, and PBX administration.

This is the thread for folks to post in when they're looking for work. Let's use our professional networking contacts to help each other find jobs. Feel free to list open positions separately as well.
This topic first appeared in the Spiceworks Community

Are you looking for work in the UK?

I have various Labview contract and permanent positions available
across the UK. If you would like to know how much you are worth,
please email your CV to [email protected]
I look forward to hearing from you.
Tom Puffett.
Sent via Deja.com http://www.deja.com/
Before you buy.

Yes! I am looking for a job in this area. Currently working at the University of California in Davis, but the project I am hired for is almost over. I am a mechanical engineer, but do have experience with electronics and instrumentation from my current job. I don't want to brag my Labview experience, but I think I can handle pretty good. I am also persuing certification.
Please do not hesitate to contact me: [email protected]
aartjan

Looking for Work Bench

Hi SAP Gurus,
I am looking for the word work bench in SAP, can any body tell me that what is it? In SAP whit is the use of it .
Regards,
Pavan.

Dear Pavan
Check this help link
[ABAP Workbench|http://help.sap.com/saphelp_47x200/helpdata/en/d1/8018d1454211d189710000e8322d00/frameset.htm]
thanks
G. Lakshmipathi

CLD electrical engineer looking for a work via Internet

Hello to all
Let
me introduce myself. I am an electrical engineer, with a more than
three years of full time experience in Labview programming.
I have a CLD certificate, which is valid until December 2013, with plans to upgrade to CLA.
My current place of work and living is in the Prague, Czech Republic, Europe.
My work responsibilities include work on many different projects and technologies and training for my colleagues.
On request, I can send you my CV.
Best regards
Bile

Dear mr. Bile
We are in the process of building a manufacturing plant run by a large number of servo motors, all to be controlled by LabView and connected to a SQl Azure database.
Do you have experience with servo motors and databases?
Are you available for some part-time work this winter?
Regards
Jørn Watvedt

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Javacc and jjtree - looking for working example

Hi all,
I am doing a project that requires me to have an input of some java code. It is then run through a parser to tokenize it and it is then outputted into a grammar/syntax tree. My mentor has told me that I do not need to write this part (I will be doing work on tree once it is generated), and by the looks of it the parser can be 2-5k lines of code?
Anyway, I have been looking at the examples that come with javacc and jjtree, and have those working etc. My problem is that i need to combine the two examples and i cant see anyway of doing that as the examples are vastly different. (one is a java parser the other is a 'stupid program language' tree generator, so they are using different grammars?)
So my question is: is it possible to get a already made program that takes in java code and spits out a tree on the other end? If not what steps do i need to take to make this program :S
Thanks!
Scott.

Here is a visual example
http://www.bray.com/rollover.jpg
The big picture would represent area "A"
The smaller white outline box area "B"
And area "C" would be down below
Notice the thin white lines going from top to bottom and side
to side represtent the crosshairs and will move around within the
big picture as the mouse moves. Area "B" would remain centered on
these crosshairs and would show a fullsize image of the area
immediately around where the crosshairs are located. On a mouse
click would change area "C" to pull up some detail text, photos,
etc.
The large picture will actually be a map as opposed to a pure
photo as shown here, it was just easiest to grab a photo real quick
for this visual example. I borrowed this photo from
http://www.pezcyclingnews.com/
I hope they don't mind to much.

Looking for work that is commutable from Chelmsford, I am CLAD qualified and have several years experience developing test solutions

Hi
I wondered if anyone new of any job openings that are commutable from Chelmsford Essex on the perm side of things or any contract
roles available?

Hello,
I saw your message & I was wondering if you were still looking at new opportunities.
I have a client on the North Shore who is looking to hire a Certified Labview Developer. The candidate will use Labview to develop test stands and production equipment as well as develop production releases and special purpose test software. I have included a job description below for your convenience.
Essential Responsibilities:
·         Develop or maintain LabVIEW applications to operate the development systems and skids for several product platforms.
·         Employ hardware platforms of National Instruments hardware, off-the-shelf equipment, plus custom hardware. Experience desirable in SCXI, CompaqDAQ, and USB hardware. Write software to control equipment and record data.
·         Perform advanced LabVIEW programming techniques and interaction of the software with the hardware. TCP/IP and CAN interfaces; LabVIEW Real-Time module and LabVIEW FPGA modules.
·         Support, improve and modify existing LabVIEW applications as necessary to support company-wide product development efforts.
·         Interpret and understand wiring schematics and simple control signal test bench wiring.
·         Troubleshoot software, electrical control, and mechanical interface issues and suggest or implement creative solutions.
·         Document all existing and new LabVIEW applications as needed.
Qualifications: (required unless otherwise noted)
Education
Bachelor’s degree in Software, Electrical Engineering or Computer Science. Master’s degree a plus.
Must be a Certified LabVIEW Developer.
Previous Work Experience
2 to 3 years LabVIEW application programming experience. Process control systems experience is a plus.
5-7 years previous experience with software development understanding hardware/software interfaces and the willingness to work in the hardware and process areas.
Special Skills and Abilities
·         Demonstrated excellence with LabVIEW a must.
This is a full-time, permanent position with a growing company. They are offering a competitive salary, bonus potential & full benefits.
If you know anyone who would be interested in this position, please have them send a current, Word-formatted resume to [email protected] and follow up with a phone call (231-518-4066) so we can discuss the details. Thank you in advance for your assistance.
Thank you,
Brad Fields
Permanent Placement Division Manager
Aries Group, Inc.
Direct: 231-518-4066
Toll Free: 877-806-7977, Ext. 272
[email protected]
www.ariesgroupinc.com
www.linkedin.com/pub/brad-fields/4/828/875

Looking For Work - FMS

Hello All,
I recently purchased FMS and installed it on my server. I
need someone to work on a few projects for me since my knowledge is
limited. Please contact me if you are interested.
Thanks

FMS, while certainly capable of it, is an expensive solution for something like that. If it's not something you can do with your http application server, I'd suggest looking into BlazeDS.

New Q-10 User - Complaints -- Looking for Work-Arounds

BB OS 10 has a business path (through enterprise activation) and a personal path – so if you are using enterprise activation for business, you need to make sure your employer has the BES10 feature or it will not work. And without this feature, I sense it impacts use of the device in many ways.
Q10 does not have a deactivation feature to prevent deleting email from Outlook when one deletes email from the BB. Very inefficient – I have to go thru email twice – once on Outlook and once on BB.
Upon set-up, all Outlook contacts did not interface to the BB.
When I accept calendar invites on the BB show up on the BB calendar, it reads it as "personal path" (see #1 above) and does not show up on the business path to register on my Outlook calendar. This causes false availability highlighted on Outlook.
Replying to email and accepting calendar invites on the BB do not show an indication of response/acceptance on Outlook. This is very confusing, as I have to personally recall what I’ve replied to on the BB before filing on Outlook.
I'm guessing I will have more difficulties...but these are major inefficient issues for me. If anyone has "work around solutions" here, please let me know.

Hello scottjones92660;
Welcome to the forums and thank you for your question.
In response to your inquiries I have included the following response for your perusal;
“BB OS 10 has a business path (through enterprise activation) and a personal path – so if you are using enterprise activation for business, you need to make sure your employer has the BES10 feature or it will not work. And without this feature, I sense it impacts use of the device in many ways.”
The BlackBerry 10 devices utilize ActiveSync to communicate\sync with end user mailboxes. Although the BlackBerry Enterprise Service 10 does provide security to devices and will setup and separate a Work Perimeter in addition to the Personal Perimeter, devices can also be activated strictly to ActiveSync only.
“Q10 does not have a deactivation feature to prevent deleting email from Outlook when one deletes email from the BB. Very inefficient – I have to go thru email twice – once on Outlook and once on BB.
Upon set-up, all Outlook contacts did not interface to the BB.”
I am unsure as to your question as it seems contradictory to your above statement. You state the Q-10 does not have a feature to prevent two-way synchronization of mail, which is typical of ActiveSync activated devices. You go on to say that this is inefficient as you have to go through mail on the mail client and on the device.
The device is utilizing ActiveSync synchronization, as such what is deleted on device or mail client, will sync with the other. If this is not the case and what is deleted on the device or mail client is not syncing, it is possible you may have an incomplete activation. This may also allude to the issue that all contacts from the mailbox Contact Parent Folder did not sync to the device.
“When I accept calendar invites on the BB show up on the BB calendar, it reads it as "personal path" (see #1 above) and does not show up on the business path to register on my Outlook calendar. This causes false availability highlighted on Outlook.”
When a device is activated on the BlackBerry Enterprise Service 10, the device calendar can be accessed from the Personal Perimeter as well as the Work Perimeter.
The Free\Busy feature with ActiveSync is availability starts in version 14.0 With Microsoft Exchange Server 2010.
If calendar invites are sent to and accepted by the corporate email account on a device that is activated on a BlackBerry Enterprise Service 10, they will be visible on both Perimeters.
The following is a link to the BlackBerry Enterprise Service 10 guides and documentation and Microsoft ActiveSync;
BlackBerry Enterprise Server 10
Microsoft ActiveSync FAQ;
Let us know if you have any further questions regarding this specific request.
MAD-VIKING

Looking for working iPad 3 Mini Charging Cable

Hello Team,
I Bought a Native Union XL Cable for my iPad 3 Mini in the hope it would have worked but to no avail that’s not the cables fault but maybe Apple, Does anyone know of a charging cable longer than 2 Meters that does work or is Apple going to make a longer cable? Or authorize a company to make a cable, like Belkin, Native Union, Mophie and many other companies.
Any replies would be greatly appreciated thank you in advance.
Darren Smith

Hello Tim
I plug it into a socket on the bulkhead but there is only 2 sockets in the cabin but its not the socket that the problem its the cable as if i use the cable that it came with with a multi use plug it works but when you sleep in the top rack its an effort to get out to charge it hence why i bought a 3 meter cable
Darren

HP G62-b32EO - Looking for working drivers

Hi
After i install new Win7 i have a problem with video drivers for my laptop.. I know that i have ATI Mobility Radeon HD 5470 (switchable), but ATI's autodetect is founding for me only driver to 4200 series. I try many Catalyst installers, but i have always blue screen or error with graphic drivers when system is restarting, and Win is installing 4200 series back.. I also install bios driver and SP1, but i have still the sam problems...
Can someone help me? I can't play in many of my favorite games (terrible frame rate in most of them)

Hi:
See if this driver from a different notebook with the same graphics setup as yours works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89814-1&cc=us&dlc=en&lc=en&...

Looking for working example using javafx.builders.HttpRequestBuilder

Hi,
Is there any working example using javafx.builders.HttpRequestBuilder and javafx.io.http.HttpRequest to communicate with application server?
Thanks in advance.
LD

Hi,
Is there any working example using javafx.builders.HttpRequestBuilder and javafx.io.http.HttpRequest to communicate with application server?
Thanks in advance.
LD

CLD Certified Engineer Looking for Part Time Job

I am a Certified LabVIEW developer with around 3 Yrs of experience in developing LabVIEW based applications. I am currently working on Version 8.5. I have worked with Analog, Digital, GPIB, CAN, J1850 and Serial protocols. I have also worked on Non NI devices such as AB PLC controllers. I have developed small to complex standalone applications. Some of them were production in-line systems.
I can work in the evenings and during weekends. I can send my resume if needed.

I am interested in reviewing your resume. Please send to [email protected]

CLD/Electronics Technician looking for work in Utah.

Similar Messages

Maybe you are looking for