Clé 3G  : installation impossible / Lion. pouvez-vous SVP m'aider ?

Clé 3G : installation impossible / Lion

Je suis désolé mais sa ne m'aide pas.
j'ai oublier et je vient de m'installer Windows 7 SP1 avec pilote carte graphique de marque Nvidia.Mes infos Système:
Système d’exploitation
Microsoft Windows 7 Édition Familiale Premium
Version
6.1.7601 Service Pack 1 Build 7601
Informations supplémentaires
Non disponible
Éditeur
Microsoft Corporation
Ordinateur
ACER-PC
Fabricant
ACER
Modèle
M5640/M3640
Type
PC à base de x64
Processeur
Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, 2403 MHz, 4 cœur(s), 4 processeur(s) logique(s)
Version du BIOS/Date
American Megatrends Inc. R01-A1, 07/12/2007
Version SMBIOS
2.5
Répertoire Windows
C:\Windows
Répertoire système
C:\Windows\system32
Périphérique de démarrage
\Device\HarddiskVolume1
Option régionale
France
Couche d’abstraction matérielle
Version = "6.1.7601.17514"
Utilisateur
acer-PC\acer
Fuseaux horaires
Paris, Madrid (heure d’été)
Mémoire physique (RAM) installée
4,00 Go
Mémoire physique totale
4,00 Go
Mémoire physique disponible
2,79 Go
Mémoire virtuelle totale
8,00 Go
Mémoire virtuelle disponible
6,63 Go
Espace pour le fichier d’échange
4,00 Go
Fichier d’échange
C:\pagefile.sys
ensuite

Similar Messages

  • Bonjour , je possède une version labview 7.0 je voudrais procéder à l'installation de l'interface labview pour Arduino je n'y arrive pas ,VIPM ne voit pas la version de labview 7.0 Pouvez vous m'indiquer une procédure ? merci cordialement Laurence

    Bonjour ,
    je possède une version labview 7.0
    je voudrais procéder à l'installation de l'interface labview pour Arduino
    je n'y arrive pas ,VIPM ne voit pas la version de labview 7.0
    Pouvez vous m'indiquer une procédure ?
    merci
    cordialement
    Laurence

    Bonjour Laurence,
    L'interface LabVIEW pour Arduino n'est disponible qu'à partir de la version 9 de LabVIEW comme décrit ici:
    LabVIEW Interface for Arduino FAQ
    https://decibel.ni.com/content/docs/DOC-16024
    Bon courage
    Cindy

  • Installation impossible sur ce disque

    Bonjour,
    Cela fait plusieurs versions de flashplayer que l'installation me dit "installation impossible sur ce disque" lorsque j'utilise l'utilitaire d'installation. J'ai tout essayé avant, et j'ai désinstallé, essayé d'utiliser un autre disque, mais seules les anciennes versions (sauf la 11.xx...) ont pu s'installer, les nouvelles ne le peuvent pas.
    Je suis 0S X Lion (10.8.5) et je ne sais pas quoi faire pour résoudre le problème
    J'ai safari et firefox aux dernières versions

    Quand j'utilise "flashplayer installer", cela affiche "General Installation Error" après téléchargement
    Quand j'utilise "flashplayer installer" offline, cela affiche "Installation fail"
    Donc ça ne provient pas du téléchargement
    Mais quand j'utilise le programme d'installation en passant par les ressources, puis le package (dernière solution de l'aide d'installation de flashplayer / problèmes d'installation mac os X), ça m'affiche "Cannot Install on this disk"
    Et j'ai vérifié, j'ai assez de mémoire et je correspond aux exigences système

  • Superdrive HS depuis l'installation de Lion.

    Bonjour,
    J'ai un mac mini fin 2009 qui a des problèmes avec le SuperDrive depuis l'achat et l'installation de Lion. Il voit les CD et DVD vierges, ne grave que les CD et ne lit ni les CD / DVD gravé, ni les CD music originaux, ni les DVD originaux. J'ai essayé de faire une mise à jour du firmware du Mac mini sans résultat, et du firmware du superdrive sans résultat aussi.
    Mise à part cela tout le reste fonctionne parfaitement bien.
    Avez vous des solutions ??
    Merci par avance de l'intérêt porté a cette demande.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Mon pc est en panne pouvez vous m'aider

    bonjour mon pc est en panne pouvez vous m'aider à installer indesign et photoshop sur un autre poste

    Si tu computador/ordenador está malo, no veo cómo puedas instalarle nada. El primer requisito para recibir ayuda en estos foros es preguntar en el foro apropiado; y éste no lo es. Pregunta en los foros de cada producto,
    http://forums.adobe.com/community/indesign
    http://forums.adobe.com/community/photoshop
    o busca ayuda aquí:
    http://forums.adobe.com/community/download_install_setup
    En todo caso, nadie podrá ayudarte si no proporcionas información apropiada y suficiente sobre tu problema.

  • Pouvez-vous me dire comment je peux prendre la musique qui est sur mon ipad et le transférer dans ma bibliothèque de mon mac ?

    Bonjour
    Pouvez-vous me dire comment je peux prendre la musique qui est sur mon ipad et le transférer dans ma bibliothèque de mon mac ?

    Google translate:
    I bought a book on iBook and I can not read, it says that my version iBook is not good but it is up to date ..... the book in question is the fire of passion Nora Roberts and this is the first time I have a problem of its kind yet I have several purchases under my belt
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933http://support.apple.com/kb/HT1933
    https://reportaproblem.apple.com/https://reportaproblem.apple.com/
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7http://tinyurl.com/7tscpa7
     Cheers, Tom

  • Custom installation of Lion OS X?

    In Snow Leopard and Leopard, it was possible to customize the isntallation of OS X, by removing printer drivers, languages, fonts, X11, etc.
    It seems that the option to do so in Lion is greyed out. Why? And how do I customize the installation of Lion?
    I like choice in the matter of how much disk space something will take up...
    Thanks!

    None of the optional packages are installed by default anymore (including printer drivers).
    If you want a optional package such as a printer driver or Java, you will get a prompt asking you to download it from Apples servers the first time you try to use it.
    Other things that used to be on the install DVD such as Xcode now come from the app store if you want them.
    Edit: I'm not sure about Languages though, they might still get installed.

  • After the installation of Lion I don't see the partition with Windows 7. The solution?

    After the installation of Lion I don't see the partition with Windows 7. The solution?

    Let's be real clear here -- are you saying you are using Internet Explorer and when you try and download Mozilla Firefox it gets around 75% through and shuts down?
    If so there is something wrong with your computer -- or at least IE. I rarely, if ever, recommend this, but it might be time to reformat your hard drive and reinstall your OS (if you are even thinking about doing this the first thing you must do is back up all your data files, preferably to writable media like DVDR or CDR).
    If you have a friend with a computer perhaps you can get them to download both the latest iTunes as well as (more importantly) the latest firmware updater, and then install them on your machine (they can write them to their own CD).
    The other thing that occurs to me is you might not be logged in as admin on that computer -- make sure you are doing this and are the only user.
    Otherwise my brain is fuzzy right now -- perhaps someone else can jump in after you reply (I'm right in the middle of packing for a cross country move and only able to spend about five minutes a day on this board).

  • Problème avec mon album. Pouvez-vous m'aider?

    Bonjour, je suis entrain de monter un album photo sous le thème «journal».
    Et il y a une des pages de 9 cases que lorsque j'y importe les photos qui change automatiquement pour un autre 9 cases.
    Pouvez-vous m'aider?

    Questions about iPhoto for IOS should be posted int eh iPhoto for IOS forum - https://discussions.apple.com/community/app_store/iphoto_for_ios
    LN

  • Problem after installation Mountain Lion

    I bought a macbook pro that came with Lion retina, and brought iphoto and garageband preloaded.
    I downloaded the installer mountain lion and did a clean install. (deleting and creating a new partition).
    The problem is that I do not see iphoto or garageband. how I can fix?
    as I can go back to the installation of lion if the recovery HD by default,  is erased?.
    thanks

    I found it! -  under Users/....
    So now i will back up all these files.
    What should I do then?
    Follow the "step 3. If you have a backup, press Command and R keys in boot, open Disk Utility, erase the disk and install OS X" whic you have suggested earlier?
    Do i need to have cd or flash drive to install OSX or is it enough to have internet connection?

  • Bonjour. Je viens de passer sous windows 8.1 et je ne parviens pas à mettre à jour mon élément 9. Pouvez-vous m'aider? Merci

    Bonjour. Je viens de passer sous windows 8.1 et je ne parviens pas à mettre à jour mon élément 9. Pouvez-vous m'aider? Merci

    Direct Updates
    https://www.adobe.com/downloads/updates/

  • Cedric: Bonjour! Bienvenue au service clientèle d'Adobe. Cedric: Afin de vérifier votre identité, pouvez-vous me confirmer le nom, prénom ainsi que le numéro de téléphone liés au compte renseigné s'il vous plaît ?  Benedicte Baritaux: Bonjour, J'ai ouvert

    Bonjour, J'ai ouvert un cas avec votre collègue hier  mais il n'a pas su me répondre. J'ai Lightroom avec licence en 5.6 téléchargée dans mon environnement Mac 10.9.5. Ce n'est donc pas une version Cloud. Je veux le plug-in qui permet l'import d'Aperture vers Lightroom. Je l'ai téléchargé mais je ne le retrouve pas ni sur le disque ni via la fonction "module externe - extra" de Lightroom. Et lorsque je veux le retélécharger il me dit déjà obtenu ! Pouvez-vous me confirmer que ce plug-in fonctionne pour une version lightroom téléchargée et comment l'implémenter. J'ai aussi essayé avec Adobe Exchange CS6 il m'a téléchargé le fichier "com.adobeexchange.ApertureImporter.1412947114.b1a9c8ff5fc4bde5bec95b8c0023a22d_1.0.0_1cb 85d.zxp" mais exchange dit qu'il ne sait pas l'ouvrir !!! 0 l'aide !!! C'est un besoin urgent et j'ai fait confiance à Adobe dans ses annonces ! Cordialement

  • I want to wipe my computer clean and start with a new installation of Lion

    My MBP has been acting strange.  I want to wipe it completely clean and start with a brand new installation of Lion.  How do I do that?  I know I can access the recovery partition by pressing 'Command+r' during the boot process.  However, do I need to use the disk utility option first and erase my internal hard drive?  Then do I use the new lion instal option?
    Or if I choose the new lion isntallation from the recovery partition, does it erase my drive first?
    -jon

    What error?
    The sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer.  Have you failed to do this?

  • Mac Pro will not restart after installation of Lion.  Help!

    Mac Pro will not restart after installation of Lion.  Help

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Clean installation of Lion on disk that already has Lion installed

    I want to make a clean installation of Lion on a disk where I already have Lion installed. I then got a message that I have to place the earlier app in the trash. What and where are the earlier version? Regards and thanks in advance for help!

    Hi kajfromfitou:
    I also perfer the clone approach. For one thing, all data, hidden files,  etc., you might want to ever access will be available until you dispose of your clone--if ever. And, after you get everything set up, you can clone your new Lion drive over your old Lion clone for continusous use as a back up. If your internal dirve ever gets fouled, then you can clone from you external over your internal partition, and you are good to go again.
    Below are the steps I used in doing what you apparently want to do--except that the clone I made was of my Snow Leopard installation. You will be cloning your existing Lion installation. My steps are only illustrative since your apps, files, etc., may be very different from mine. You will need a Lion installer if you go this way. Don't delete it if you have it whatever you do. See the last step below first. You may want to get the Lion version of SuperDuper as a preliminary step since you would be cloing a Lion partition to your exernal drive (yes, you may have to buy a bootabl external drive).
    01. Downloaded Lion to Internal/SnowLeopard drive stopping the installer before it installs (made copy of installer to be sure I had one before moving on)
    02. Backed up Snow Leopard by cloning internal drive to external drive partition
    03. Formatted external drive Lion setup partition as Mac OS X journaled using internal Snow Leopard installation (be sure the partition is GUID)
    04. Installed Office via disk on Lion partition and copied documents from internal to Lion Documents folder
    05. Copied my Picture and Movies files to pertinent folders on Lion
    06. Imported Safari bookmarks on Lion partition from previously exported file
    07. Installed QT 7 and QT Pro License
    08. Updated iTunes and copied user iTunes folder to Music folder on Lion partition
    09. Imported Address Book on Lion using previously prepared archive file
    10. Installed various additional pieces of software using accumulated disks (e.g., Photoshop CS4) ,image files, downloads (e.g.,iLife11) and product keys
    11. Just started using Mail5.0; it just works
    12. Installed Printer
    13. Installed Flash beta from Adobe site (new version now is available)
    14. Copied iWeb domain filefrom Snow Leopard installation to appropriate place in Lion installation (instructions may be needed on this step)
    15. Tested Lion drive and did miscellaneous setup tasks
    16. Downloaded and Installed Lion version of SuperDuper on Lion and cloned Lion drive to my internal.

Maybe you are looking for