Clean Access appliace, Certificate issue with CA server on Windows

Dear all,
When the CCA agent connects to the network and authenticates on the CCA manager he get the security messange and he has to click yes in order to continue. to prevent this from comming up, he has to remove the temporary certificate and assign a CA certificate. When I did that using the attached procedure I got an error while logging to the CAM Manager (attached the procedure and the error). please advise what could be the reason for this issue in order to solve it!
regards,

Hi,
Thank you for posting in Windows Server Forum.
From your desciption it seems that you have set the RDS CAL to per device on one server and the one which is facing error, you are pointing that server to the server which is already set as Per device CAL and thus you are facing the error. Means The RD licensing
mode on the Remote desktop server set to Per Device, while the license server might have only Per User CALs.
If this is the case, the license server issues only temporary licenses that cannot be upgraded. When the temporary licenses are within several days of expiring, "Event ID 26, Source: Application Pop-up" appears in the application event log on the client.
The event message indicates the number of days remaining before the temporary license expires. Similarly, "Event ID 1011, Source TermService" appears in the application event log on the terminal server.
There are solution to this issue by changing the license mode and check the result. Also it can be possible that the remote desktop server might not be able to locate the license server.
Please go through below link carefully. (As it’s for server 2003 but we can verify the solution as described)
Troubleshooting Remote Desktop Licensing Error Messages
http://technet.microsoft.com/en-us/library/cc756826(v=ws.10).aspx#BKMK_12
In addition, you can try following solution.
1 - Open regedit
2 - Go to this location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSLicensing
3 - Then Delete MSLicensing key totally.
4 - Now reconnect to the same server machine through remote desktop.
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Certificates issued by communications server for client authentication

Hi,
we ran into problem with those certificates, that are being issued by the lync server itself. In our enteprise we have CX600 and CX3000 phones, and i know that certificate authentication is required for the phones to work (both for registrar and webservice).
However, now that users have lync installed, they have their communications server certificate assigned as well. The problem is when a user needs to sign a document with the certificate from our private CA, for most of the users, word or excel suggests to
use a certificate issued by communications server, not our ent CA. Maybe there is a way for LYNC to trust private enteprise CA and not give out its own certificates and STILL use certificate authentication?
Thanks!

Facing almost the same issue, Lync (server) issues ClientAuth certs from "Communication Server", (btw
is not trusted of course), and in turns forces users to make a selection of which VPN cert to use when dialing in, instead of only one ClientAuth cert installed, they now have 2 ClientAuth certs installed, which our internal CA's should care about and NOT
the Lync (server).
Don’t get how an MS product of this caliber can be built without proper PKI integration, how can it NOT utilize internally issued certs for client authentication???
Not the first though, SCCM and OSD is another example....
However, are you saying that Lync communication can’t be used without certificate authentication,
without the user being spammed with credential prompts?
Trying to get clarification on this…

Issues with JMS Server migration

Hi All,
I have issue with JMS server migration.
I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
As a result there is a redundancy when the MDB is executed
I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
Please let me know is this a bug or am I missing any configuration.

Hi Suresh,
There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
Suggestion:
- Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
- If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
Hope above information helped you.
Regards,
Ravish Mody

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Compatibility issue with outgoing server; they suggest downloading Thunderbird. Any suggestions?

My internet provider says there is a compatibility issue with outgoing server and suggest downloading Thunderbird. Any comments?

Not without some details from you.
What version of OSX
Who is the mail provider
If not iCloud mail what type is it (POP or Imap)
That's a start.

Issues with illustrator 10 and windows 8

any known issues with illustrator 10 and windows 8...version worked fine on windows xp....new computer with windows 8....now cannot seem to operate. Loads, and shows access but will NOT start up. help ! thanx ttp74

AI 10 is now 10 years or so old and was never tested on nor designed for Win 7 or Win 8. You should simply assume it's not compatible and will never run properly. feel free to spend your time with the compatibility modes and al lsorts of hacking with the security stuff and otehr settings, but to be honest, it will probably be a waste of time.
Mylenium

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Initial issues with PS CS4 Extended Windows XP Pro.

Initial issues with PS CS4 Extended Windows XP Pro.
CS3 worked just fine but had many issues with Bridge CS3. So frustrating that the $$ to upgrade to CS4 seem worth it. Mostly works OK with the following exceptions:
1. Sometimes the file menu selections are non-selectable grey including fundamental functions like Open and Exit not even clicking on the x will allow PS to close! I found a workaround, I can select a tool that is not currently selected (like the crop or brush) and now the menu items appear.
2. The Arrange Documents drop down menu is blank except for the lower text portion. All icons are missing. Roll over text popup shows what is supposed to be on the menu but no icons.
3. I have setup Bridge CS4 to auto start at logon. Works OK but sometimes for whatever reason stays busy after I close. Task Manager shows Bridge using up to 25% of CPU time and the program is not even open!
5. I purchased a couple Canon EOS 50Ds as backup cameras for our business. Worked last week with CS3 and Bridge with Raw 4.6 upgrade. Does not work with RAW 5.0 in CS4bummer!

I had the same problem with blank/missing "Arrange Documents" icons. And I use NIK and OnOne plugins (CS4 & Vista). These plugins are all supposed to be compatible with CS4 and I use them ALOT - so I refused to remove them. Today I also started having a problem with an error re: needing to install a printer before I could select print functions.
I found the answer to both problems!! While researching the error message I found information from Adobe support stating that you should:
1. Quit Photoshop
2. Vista: Rename the Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp file to Adobe Photoshop CS4 Prefs.old
Windows XP path: Documents and Settings/[username]/Application Data/Adobe/Adobe Photoshop CS4/Adobe Photoshop CS4 Settings/Adobe Photoshop CS4 Prefs.psp
3. Start Photoshop - it will create a new preferences file.
My print error message is gone AND I have Arrange Documents icons!!!

Access issue with Terminal server in MPLS network

Hi,
i have MPLS network and i have installed windows server 2003 with terminal server.
Problem - every 40 minutes, 2 hours server stopped pinging in spoke network while this worked in LAN,when we trace it by pinging of server IP address we get RTO,
after rebooting the server, we can easily access the server and work for again 40 to 2 hours.i am not able to understand the problem
i have troubleshoot -
1. restarted all network media during the problem
2. reset the LAN card of server
3. restarted the server
after all, it is not resolved.
please help me here to solve this issue.
Thanks,
Damodar
Regards, Damodar

Hi Abrante
thanks for your response but the issue of tftpboot still seems to be there. I am unable to find the issue here. We users try to load their images from the /tftpboot directory on the routers they get the following error messages
Error loading file: errno = 0x3c.
Can't load boot file!!
They are able to connect to another tftpboot server without any issues at all. I am not sure if I have missed out any configuration parameters while enabling tftp. Is there anywhy I can find tftp log files on the server.

Issue with MSSQL server connectivity from ODI 10.1.3

Hi,
In one of the interface we are populating data to target table in MSSQL server version 2005.
The physical topology connection results successful.
Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
     at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.d.a(d.java)
     at com.sunopsis.graphical.component.b.h.e(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.a(h.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.bp.bN(bp.java)
     at com.sunopsis.graphical.frame.bp.bL(bp.java)
     at com.sunopsis.graphical.frame.a.is.bH(is.java)
     at com.sunopsis.graphical.frame.bo.r(bo.java)
     at com.sunopsis.graphical.frame.bo.bv(bo.java)
     at com.sunopsis.graphical.frame.bo.z(bo.java)
     at com.sunopsis.graphical.frame.bo.b(bo.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I have verified below:
The SQL server version is: MSSQL server 2005
the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
Java version: jdk1.5.0
There is no change in source or target db. Please help me to fix this issue

Hi,
Thanks for the reply. The link is helpful and its the same what is there in the environment.
"The JDK version is 1.5 and JRE version is 1.4.2."
But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
Thanks,

SSL certificate issue with WLS 10.3

Hi All,
I am facing this issue with my WLS cluster.
<21-Apr-2010 10:42:00 o'clock BST> <Warning> <Security> <BEA-090482> <BAD_CERTIF
ICATE alert was received from system.core.com - 10.15.135.30.
Check the peer to determine why it rejected the certificate chain (trusted CA co
nfiguration, hostname verification). SSL debug tracing may be required to determ
ine the exact reason the certificate was rejected.>
<21-Apr-2010 10:42:00> <Warning> <Uncaught exception in server handler: javax.ne
t.ssl.SSLKeyException: [Security:090482]BAD_CERTIFICATE alert was received from
system.core.com - 10.15.135.30. Check the peer to determine wh
y it rejected the certificate chain (trusted CA configuration, hostname verifica
tion). SSL debug tracing may be required to determine the exact reason the certi
ficate was rejected.>
Please suggest. I have also tried the below settings.
Node Manager:
-Dweblogic.nodemanager.sslHostNameVerificationEnabled=false
Admin Server:
-Dweblogic.security.SSL.ignoreHostnameVerification=true
Many thanks in advance.

Hi Sandip,
I am facing this issue right after when I have configured the listen address to my system IP in Machine(NodeManager), earlier it was "localhost".
Also I have tried to generate the certificates e.g.
C:\bea\wlserver_10.3\server\bin>java utils.CertGen -cn system.core.com -keyfilepass DemoIdentityPassPhr
ase -certfile mycertificate -keyfile .keystore
Generating a certificate with common name system.core.com and key strength 1024
issued by CA with certificate from C:\bea\WLSERV~1.3\server\lib\CertGenCA.der file and key from C:\bea\WLSERV~1.3\server
\lib\CertGenCAKey.der file
C:\bea\wlserver_10.3\server\bin>java utils.ImportPrivateKey -keystore DemoIdentity.jks -storepass DemoIdentityKeyStorePa
ssPhrase -keyfile .keystore.pem -keyfilepass DemoIdentityPassPhrase -certfile mycertificate.pem -alias demoidentity
No password was specified for the key entry
Key file password will be used
Imported private key .keystore.pem and certificate mycertificate.pem
into a new keystore DemoIdentity.jks of type jks under alias demoidentity
Tried the above but not wokring. Please advise.
Edited by: R Vashi on 21-Apr-2010 03:38

DB-Library BCP issue with SQL Server 2014

Hello,
My application uses DB-Library (ntwdblib.dll) to communicate with SQL Server 2014. We are having issues calling bcp related functions like bcp_init which always returns FAIL status. Our application was working fine with SQL Server 2012 and all other previous
SQL releases. But we are getting below error in SQL 2014,
msg 4801, state 1, severity 16 : Insert bulk is not supported over this access protocol.
Can anyone please help ?
Thanks,
Himanshu

Hi Himanshu_kus,
Is this still an issue, or can we close the thread?
[Personal Site] [Blog] [Facebook]

Having issues with VS Server Explorer viewing Azure Storage

Hi,
I've been using VS server explorer pretty successfully for awhile. Recently (not sure of the exact point), the Azure storage portion started giving me trouble. It would not auto-populate with my storage account, and I now have to manually input the account
name and key manually each time to get my storage to pop up.
Also, I can no longer access any blobs via server explorer. It says invalid key - even though I can access via other means with the same account name and key. I have already tried making sure my computer has the correct time synced up. Are there any other
steps I can try do fix this issue? For now I am using a third party client to perform blob admin operations, but it would be really convenient if I could continue to do so with VS server explorer.
Thanks,
Thomas

Hi Thomas,
Thanks for your post.
I 'd like to suggest you can try to sing out and re-sign in the Azure server explore.
1.right click the Azure node on server explore.
2.Select "Connect to with Microsoft Azure " and then login using your account.
3.Make sure your select the right subscription.
4.If storage list didn't include your account, you could right-click the storage node, and select Attach External Storage.
Another approach is that you can re-install the
Azure tool.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issues with Essbase Server configuration

Hi All,
- I have a simple environment with one foundation server with only foundation services running on it (only foundation components installed). On the single Essbase server, I have installed foundation (by default) and Essbase components.
- I'm facing an issue with the Essbase server configuration. All steps complete except for the last step: Deploying the web applications (APS and EAS) to the WebLogic server.
- FYI, I am deploying the web application to the existing domain created on the Foundation server. As all products need to be on the same domain..
During deploying, the WebLogic admin server reports the following error:
BEA-149003
Unable to access application source information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application ‘APS’.
The specified error is: No application files exist.
Now the above path and files exist on the Essbase server but not on the Foundation server. So after playing around with the WL admin console and reading Sandeep's post[1], I have come to the conclusion that:
1. The Essabase components have to be installed on the Essbase server, but not configured.
Now this implies that I need to install all components on the foundation server even though I will only be using it to deploy the foundation services which seems a bit silly?
2. Create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but won't be on the same domain as the other products.
Well I'm a newbie with WebLogic and would thus appreciate your valuable inputs!
Thanks in advance...
References:
[1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

From the configuration docs -
"On the machine on which you plan to administer the WebLogic Server, you must install all Web applications for all applications you plan to deploy on any machine in the environment. (The WebLogic Administration Server is installed and deployed on the Foundation Services machine.)"
You shouldn't need to create a new domain for deploying on other servers and can use the existing one and only deploy the web applications on the servers you want them running on.
I am not sure which version you are installing but if it is 11.1.2.1 then I take it the OS is the same type on both machines
"All Web applications in an EPM System deployment must be deployed on either windows machines or on all UNIX machines."
There note has doesnt seem to be there in 11.1.2.2 so I assume it is not the rule anymore.
Cheers
John
http://john-goodwin.blogspot.com/

Clean Access appliace, Certificate issue with CA server on Windows

Similar Messages

Maybe you are looking for