Clean all the stuff

I have trouble with the FPTools on my IMac (10.6.8)
with InDesign CS5 and CS5.5
I removed both programs and with the program AdobeCreativeSuiteCleanerTool
all DPS software.
What kind of foles do I have to remove too
before I go to install again all software?

Hey purly,
You can restore the iPhone and set it up as a new phone.
http://docs.info.apple.com/article.html?artnum=305744
You can also delete the apps from iTunes if you want. iPhone apps can be downloaded again for free.
Also, you can zero out all the data on the iPhone by going to Settings> General> Reset> Erase All Content and Settings> Erase iPhone.
Jason

Similar Messages

Any way to clean all the stuff off my iphone?

My apps aren't synching right and at this point I just want to "wipe" the iphone and then try resynching. Is there any way to do this? I don't care if it takes out all of my contacts and songs.

Hey purly,
You can restore the iPhone and set it up as a new phone.
http://docs.info.apple.com/article.html?artnum=305744
You can also delete the apps from iTunes if you want. iPhone apps can be downloaded again for free.
Also, you can zero out all the data on the iPhone by going to Settings> General> Reset> Erase All Content and Settings> Erase iPhone.
Jason

We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads. The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized. Tried everything. Help!

We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads. The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized. I've tried updating the software, reinstalling iTunes, using different ports on the laptop, different cables...just about everything. I have NEVER been able to connect this one device, but all the others are fine. I'm at my wits end. Is there someone out there who can help a relative novice figure out what's going on? Thanks so much!

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

How can I clean all the junk files from my iMac so that it can run faster?

How can I clean all the junk files from my iMac so that it can run faster? Its been slowing down ever since I started using it.

Before doing anything, we might be able to help with your iMac issues here.
Please download, install and run Etrecheck.
http://www.etresoft.com/etrecheck
Copy/paste its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software.

How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

Sky is right you can restore the old backup and it will not affect the old iPad
To make sure do this:
1. If you have the old one then just turn off wi-fi and the iPad (that's just for your peace of mind)
2. Put new iPad on airplane mode (just for no interruptions )
3. Connect it (while it's on, don't shut it down)
4. Follow prompts and when it asks if you want to setup as new or restore CHOOSE: RESTORE
5. It will make its magic (just wait for it to sync, restarts, and finishes) it might ask you to update software if it does just accept
6. You can rename your new iPad like that you can have a fresh back up
7. ENJOY your new iPad
----------OR-----------
1. Do the above steps 1, 2, 3.
2. On step 4 you can choose to set up as new
3. Then you can choose what to sync on it (click on iPad on the left panel then the tabs on top you choose what you want on it (you can also do that if you restore)
4. Follow steps 5, 6, 7.
****If you don't have your old iPad you can remove it from your account ****
****Also when they sync it to a new computer it will setup as new unless they had an old one then they will restore it their old one****
****if you have it connected with your MobileMe or iCloud and you have the find my _____ you can also wipe it as soon as it comes online****
LET ME KNOW IF YOU HAVE ANY QUESTIONS OR CONCERNS
AGAIN ENJOY YOUR NEW IPAD!!!

I installed lion from the internet, i wanted all the stuff on it erased but it didnt do it, how do i get my computer to factory settings so it is like it was new just with a fresh copy of lion on it

i installed lion from the internet, i wanted all the stuff on it erased but it didnt do it, how do i get my computer to factory settings so it is like it was new just with a fresh copy of lion on it

Music is not included in the backup (and nor are films or tv shows), only the contents of third-party apps are included. Did you not do File > Transfer Purchases when connected to your computer's iTunes to copy your iTunes purchases over, and/or have you not got a backup copy of your music somewhere e.g. on an external drive ?

My computer broke and i lost all files including ITunes. what happens to all the stuff purchased already. will this appear in itues when i download it agian? how can i save the music on my ipod and transfere it over to the new itunes?

my computer broke and i lost all files including ITunes. what happens to all the stuff purchased already. will this appear in itues when i download it agian? how can i save the music on my ipod and transfere it over to the new itunes?

Unfortunely, all movies and songs purchased in iTunes will be lost...you'll have to purchase them again! Any applications you've purchased, you can download again for free.
Music Rescue is a program you can use to transfer any and all data (music, movies, pictures..) from your iPod to your computer, and iTunes.
http://www.kennettnet.co.uk/products/musicrescue/

Can someone tell me how to import c.d's faster. I've tried all the stuff listed on the help menu.

Can someone tell me how to import c.d's faster. I've already tried all the stuff they told me to do on the help menu. edit, pref., general, import settings, deselect "use error correction when reading audio c.d.s. It wasn't even selected in the first place. Wiped off c.d. Isn't there a way to speed up the importing? Thanks for any support on this.

I tried to rip from Windows Media & it took exactly 1 hour to rip a 1 hour c.d. Something's not right here. It's got to be something on my computer. I'm just a little old aerobics instructor trying to rip music to itunes so I can then make a playlist to put on my ipod for my class. I'm also not very knowledgeable about computers & what makes them run etc. Would appreciate any help. Thanks.

When I go to update and it gets to the backup part it gives me error -43 and says to complete it it will take all the stuff off my iPod how do I get it to update with out loosing everything on my 64 gb iPod touch

When I go to update and it gets to the backup part it gives me error -43 and says to complete it it will take all the stuff off my iPod how do I get it to update with out loosing everything on my 64 gb iPod touch

You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Old computer broken...can I put ALL the stuff in my iPod on a new computer?

Here's the deal..when I got my iPod 80GB Classic I had my iTunes on my laptop. I synched all my music, videos, and most of my pictures from the laptop to my iPod but soon after i did that the motherboard of my laptop went bad and so now I can't even turn the laptop on. I probably could get it working again but I can't aford to right now. I want to know if there's a way I can put all the stuff that's on my ipod on a different working computer. I need access to my files so I can use them for other things like burning CDs and printing pictures. Can i get to my files on the old computer even though it's broken? Or can I just use the iPod to move it all to where I can use the files? It's irritating that I HAVE all the stuff I'm wanting but I can't do what I want with it cuz it's all just on the iPod.

Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?messageID=5044027&#5044027
http://discussions.apple.com/thread.jspa?threadID=893334&tstart=0
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
Also these useful internet articles...
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/secrets/2006/12/twowaystreet20/index.php
http://playlistmag.com/help/2005/01/2waystreet/
Patrick

How do i transfer all the stuff from my ipod to my new ipad

How do I transfer all the stuff from my ipod to my new ipad

Assuming that the iPod is an iPod Touch - Restore the new iPad from a backup of the iPod and follow that with a sync with iTunes.
Connect the iPod to your computer and launch iTunes. Right click on the iPod name under devices and select transfer purchases. After that completes, right click on the iPad name again and select backup. Eject the iPod.
Connect the iPad to your computer and launch iTunes if it is not already running. If prompted to set up as new or restore from a backup - select the backup of the iPod. If not prompted, right click on the iPad name on the left under devices and select - restore from backup. Select the iPod backup in the pop up window. Let the process complete and then sync with iTunes.

I used to have an I phone but sold it and now I bought an iPad 2 and want to know is there any way to put all the stuff I bought from iTunes back when I had the phone on my new iPad ?

I want to know if I can access all the stuff I bought from iTunes a year ago

All of your "Stuff" should be on your computer. Just sync it to the ipad.
If for some reason you failed to backup your music then:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Is there anyway i can get all the stuff deleted off my phone

is there anyway i can get all the stuff deleted off my phone as its been stolen and will there be anyway ill be able to get all my stuff back if i get a new phone

If you activated "Find my iPhone", you could log into your iCloud account and wipe the phone remotely. If you have a backup of your device on your computer or iCloud, you can restore from that backup if you have your new device.
Apple - iCloud - Find your missing Apple device.

What does the garmin45.vi actually do?especially all the stuff at the bottom of the diagram page.cheers

see above
Attachments:
Garmin45.vi ‏621 KB
timeset.bat ‏1 KB
bargraph.llb ‏66 KB

It is parsing the NMEA0183 text strings returned from the GPS receiver via the serial port and displaying the information.
I am not sure what you are referring to at the bottom of the diagram page. The sequence structure in the lower right with the trig functions is displaying the satellite lock info on the satellite map.
The set button sets the PC's clock to the satellite time using the System Exec to run a batch file called Timeset.bat
The small while loop executes until it has a full NMEA 0183 sentence then the 'string subset' primitives strip out a portion of text from the sentence that identifies the type of sentence. It then matches the type of sentence to the various types possible (All the pink string stuff at the top). Depending on the type of sentence, it then passes the string to the appropriate part of the diagram where it is further parsed and converted to the relevant type of information.
For example:
The sentence for time, lat, long etc. from a Garmin45 must start with a $GPRMC in the string. All sentences start with '$' (and end with -). The '$' is stripped by the while loop, then a match is found between the first 5 bytes of the string and 'GPRMC'.
The first 2 characters, 'GP', identify the talker. GP indicates global positioning system (as opposed to 39 other possible talker devices, icluding depth sounders, voyage data recorders, Loran C, etc. The NMEA standard identifies the means for different marine equipment to communicate with each other.)
The next 3 characters, 'RMC', identifies the type of sentence. RMC is indicative of the "Recommended Minimum Specific GNSS Data". This identifies the structure of the information contained in the sentence.
That particular structure is:
$aaRMC,bbccdd.dd,e,ffff.ff,g,hhhhh.hh,i,j.j,k.k,llllll,m.m,n,o*pp
where,
aa = 2 character talker identifier
RMC = Sentence formatter mnemonic code
bbccdd.dd = Universal Time Code of position fix
e = status (A=valid V=receiver warning)
ffff.ff = lattitude
g = lattitude North/South
hhhhh.hh= longitude
i = longitude North/South
j.j = ground speed in knots
h.h = course over ground, degrees True
llllll = date (mmddyy)
m.m = magnetic variation, degrees
n = E/W
o = mode (A,D,E,M,S,N or V)
* = checksum delimeter
pp= checksum
= sentence terminator (ASCII 13 + ASCII 10 character)
Important: I don't know if this sentence explanation actually is a byte count (as the author is parsing) or an explanation of the data format within the ","'s. Ground speed is identified as x.x knots, which would seem to indicate that 9.9 knots is the fastest if it is a byte count. On the other hand it may indicate that ground speed is a fractional representation between the nth and the nth+1 comma. As I stated in my earlier post) my receiver uses a Rockwell binary protocol (which is a lot more fun than this text - NOT!!) but my OEM software definitely reports ground speeds faster than 9.9 knots.
Anyway you can see where the author is parsing this information for the RMC sentence type, based on byte position in the string, directly under the case statement for setting the PC's time.
As written, er wired, it appears that the while loop continually processes the last received data for each sentence type each time it receives any new sentence and executes, regardless of whether the data for that type of sentence has changed or not. i.e. if a different type of sentence is received the old RMC sentence will again be parsed from the shift register where it is stored. Several types of sentences are identified and stored in their respective shift register but no parsing is performed and no information is gleaned from them.
There are many types of sentences and some manufacturers have additional sentences identified as proprietary for additional info.
Given this information you should be able to examine your received data for the basic GPS information. Note that my Delorme Earthmate receiver transmits some info (sentence types for NMEA 0183 receivers) on a regular basis while some is received only intermitently, so don't assume that what you are seeing coming in from the serial port is all that you will ever see.
Hope this helps. Good Luck!

TS1372 I tried all the stuffs given above but the thing is my ipod shuffle doesn't restore at all

i tried al the stuffs .....i updated my itunes but when i try to restore it error: 1439 apears and it doesn't work at all what should i do....

which gen is ur ipod...

Clean all the stuff

Similar Messages

Maybe you are looking for