Clean and tidy fonts between application 1.1.1 and 10G
i am testing Apllication Server 10G on forms and i have noticed a differnce between the clean and tidy fonts that are in application 1.1.1 and forms 10g.
in application 1.1.1 the fonts visualized when i run forms on the application are very clean and tidy (i use standard arial fonts)
in application 10g the same froms visualized the fonts are NOT clean and tidy and it is difficul to view !!!
What kind of problem is this ???
The situation is worst than the old version or i have forgotten some thing ???
The installation is a standard installation !!!
Than'ks for all answer !!!
Hello Rajesh,
we are speaking of high end routers that are expected to process tens of thousands of flows per second even just differentiating on source and destination ip addresses there should be enough variety in your traffic to use the parallel CEF links in a fair way.
CEF uses an EXOR of ip source and ip destination and an hash seed that changes only when the system is reloaded.
etherchannel can use EXOR of different fields:
MAC SA exor MAC DA
IP SA exor IP DA
L4 SA port exor L4 DA port
but only one of them applies to a type of traffic at a specific time.
Or you expect a few very high volume flows on the links (DR or DB synchronization just to say)
So to answer your question, unless used for connecting two data centers, I don't expect to gain in fairness by using a bundle.
Hope to help
Giuseppe
Similar Messages
-
Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.
What are the performance Preferences?
-
Hi last night I stupidly downloaded App Cleaner and deleted all my applications and their associated files. Because I panicked I wasn't able to use the "put back" so I just dragged everything back in to Applications. Now none of the applications will work as some of the associated files aren't in the correct location and some of the files aren't even applications. i did not back up my system with Time Machine (lesson learnt). Please please can someone help me, I know that Mac's don't have a roll back like PC's
Buddhaguru wrote:
I know that Mac's don't have a roll back like PC's
They do. It's called Time Machine.
You need to reinstall all of your Apps. That should replace all of the support files you nuked. -
What are the differences between application server and webserver
pls give the differences between application server and web server with examples
Google.
Example
http://www.google.ca/search?hl=en&q=Do+your+own+damn+searching&meta= -
Where is the association between applications and Spaces screen configured in Mountain Lion?
Where is the assocation between Applications and Spaces screen configured in Mountain Lion?
In 10.6, I had FileMaker come up in Space 2, and it still does in 10.8 but I don't know how to change it.
Anyone know?Right-click the icon in Dock and select Options
-
How to switch to full screen faster and change between applications in full screen faster
Hi, my problem is that when I switch any application to full screen it does a little animation which spends a little time before getting to the full screen mode. The other problem is that when I change between applications in full screen mode it also does a little animation!
How can I eliminate those annoying ways of losing time?
I hope and thank very much your answers!sure man, after all the help i got, why not give some in return...
to make it full screen on oppening i put this code on the 1st frame:
fscommand("fullscreen", "true")
i also make 2 buttons for making the screen smaller and bigger again, for both i used the following
on (release) {
fscommand("fullscreen", "false")
this is for making it smaller, and for full screen i used "true" instead of "false"
of course i added a button foe exit with the follownig code:
on (release) {
fscommand("quit")
hope i helped... -
After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.
I need to take care of this. I have reinstalled it 3 times and still get the same message.
Any suggestions?Firefox is trying to update but it can't because Firefox is running
Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process -
Working with service reps who use multiple systems to complete an order. Need to know how to guide them in the use of Captivate 8 to produce a software simulation that includes the entire process.
Hi there
It sounds as if you might be thinking that Captivate typically records a single application. Certainly it *CAN* work that way, but it also can record just an area of the screen. This is what I'm thinking you are wanting in this case. Just define an area of the screen (possibly even the entire screen) and record that. Then your reps can move between applications.
Cheers... Rick -
Difference between application.cfm and application.cfc
Hi,
Can anybody explain the difference between Application.cfm
and application.cfc?
For example:
I have Application.cfm and Application.cfc in the same
folder.
/folder/application.cfm
/folder/application.cfc
/folder /test.cfm
…. And I run the test.cfm.
Which one is executed first?
Thanks,
KrishnaYour last question - Which one is executed first?
The application.cfc will be executed first if you call the
test.cfm. The application.cfm will not get executed.
and, about ur first question... cfm and cfc are entirely
different. You have onRequestStart, onRequestEnd and other events
on cfc. cfc is powerful than cfm. -
Difference between Application .cfc and .cfm?
Title says it all. I'm a bit confused about the difference
between Application.cfc and .cfm.
I understand a bit more about the .cfc, where you define
methods onRequestStart, etc.
Yet in an example I'm following, they use .cfm and the
<cfapplication> tag. Both seem to get called, but should I
only be using one file? Or?
Also since both can be used what is the calling order by
ColdFusion or is one ignored if the other is present?if you have both files in the same location, only .cfc is
processed.
.cfm is ignored if .cfc is found.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com -
Difference between Application.CurrentCulture and Thread.CurrentCulture
Can someone tell me the difference between Application.CurrentCulture and Thread.CurrentCulture.
Thread has CurrentCulture and CurrentUICulture. But Application has only CurrentCulture. Why?
(https://msdn.microsoft.com/en-us/library/system.windows.forms.application.currentculture(v=vs.110).aspx)
(https://msdn.microsoft.com/en-us/library/system.threading.thread.currentculture(v=vs.110).aspx)1)
Application.CurrentCulture delegates to Thread.CurrentThread.CurrentCulture("Gets or sets the culture information for the current thread") so it only sets it for the main thread of the
application.
2) They are both properties of a Thread object, which you can access via Thread.CurrentThread.
CurrentCulture – Tells you the user’s current locale, as set in the Region
applet. I.e.: Where is the user located?
CurrentUICulture – Tells you the native language of the version of Windows
that is installed. I.e.: What language does the user speak?
The user can change CurrentCulture using the Region applet. It’s used to determine formatting for numeric and date/time
strings.
Rachit
Please mark as answer or vote as helpful if my reply does -
Difference between application server and central instance
Hi everyone,
whats the difference between application server and central instance and message server. where it will be installed. and how?
Regards
Basis FresherHi,
just want to clarify that is is not correct that only one enqueue process can be configured on the CI.
Please see the documentation within transaction RZ11 for the parameter Parameter : rdisp/wp_no_enq
Short description : number of enqueue work processes
Parameter description :
You can use this parameter to define the number of enqueue work processes for the instance.
Ensure that a value >0 is only set on the central instance that provides the enqueue server (instance rdisp/enqname ). One enqueue work process on the central instance is normally sufficient (rdisp/wp_no_enq = 1); only in very large systems can a higher value be useful.
Kind Regards
Thomas Alt -
RE:difference between application server and web application server
hi,
i am a fresher to SAP.please tell me the difference between application server and web application server so that my doubt will be clarified.Hi,
the SAP Web Application Server is the reliable, open standard-based application server from SAP. It supports both J2EE and ABAP, and serves as the underlying infrastructure for all new and upcoming SAP solutions, like SAP R/3 Enterprise, SAP Portal, SAP Exchange Infrastructure, and all other SAP components.
The SAP Web Application Server is not a new product, it is the natural evolution of proven SAP application server technology formerly known as SAP Basis. It provides the platform to develop, execute, and operate Web applications and Web services as well as traditional SAP GUI based applications
if it helpful rewards points are appreciated -
Difference between Application log and Application server
Hello Friends,
Could you plz explain difference between Application log and Application server?
Regards
KanthApplication log is details about the business transaction, ie status / error messages
Application server is the system <hardware> on which application is running.
Regards,
Mahesh
Maybe you are looking for
-
Alternate layout created when moving pages from one document to another
I'm using CC on Windows 7 - I have 2 documents that I want to merge and make into 1 [I know people will want to know why I would want to do this - each document is the result of a different data merge - data merge can only handle one master page
-
Hello Experts, We are having SRM 4.0, Classic scenario. We want to achieve below while creating SC, 1. Based on Purchase Grp and company code, have check on price (Total value can not be greater than XX) 2. Based on purchase Grp (and may be company
-
11g Report behaves differently in Application Menu than Report Builder !
Hi, I m working in 11g Reports and noted some objects, which shows different/no results when run from my application menu (through Web.Show_document & Run_Report_object), but these objects are OK when run in Report Builder (paper layout). (1) When I
-
Hi, I downloaded Digital Editions yesterday to view an e-book for work purposes. I spent all day annotating and bookmarking the e-book. Today, when I opened Digital Editions, all my bookmarks and annotations had disappeared. I can't find any help on
-
Installing Oracle database on SUSE 10 SP 2
hi Previously, I installed oracle database on Ubuntu and OEL 5, now I tried to install it on SUSE 10 SP2. I found that the path recommended for the installation is /opt/oracle while in others (Ubuntu and OEL 5) the was /u01/app/oracle My question is