Clean (Custom) Installation of Windows 8.1

Clean (Custom) Installation of Windows 8.1
I have HP Envy laptop which has Windows 8.1 pre-installed.
Now I'm trying to clean install OS. But how to know the exact Windows 8.1 version.
I'm trying to boot from pendrive & Its asking what version to install
Windows 8.1 (Core) / OEM / KMS/OEM-Activated
Windows 8.1 (Core) N / OEM / KMS/OEM-Activated
Windows 8.1 (Core) Single Language / OEM / KMS/OEM-Activated
Windows 8.1 Core Connected (with Bing) / OEM / KMS/OEM-Activated
Windows 8.1 Pro / OEM / KMS/OEM-Activated
Windows 8.1 Pro N / OEM / KMS/OEM-Activated
Windows 8.1 Pro VL / OEM / KMS/OEM-Activated
Windows 8.1 Pro N VL / OEM / KMS/OEM-Activated
Windows 8.1 Pro WMC / OEM / KMS/OEM-Activated
Windows 8.1 Enterprise / OEM / KMS/OEM-Activated
Windows 8.1 Enterprise N / OEM / KMS/OEM-Activated
Windows Embedded 8.1 Industry Pro / OEM / KMS/OEM-Activated
Windows Embedded 8.1 Industry Enterprise / OEM / KMS/OEM-Activated
** In system properties it is showing Windows 8.1
No sub version is shown

Download and Belarc Advisor, it will give you all sorts of information about your computer including the OS
http://www.belarc.com/free_download.html
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

[Forum FAQ] How to show Windows Update in Control Panel in Clean Installation of Windows 10 Technical Preview Build 9926

Scenario
If you performed a clean installation of the new Windows 10 Technical Preview Build 9926, you would find Windows Update is only available in
Settings and is hidden in Control Panel by default. However, Windows Update is still available in Control Panel if it is an upgrade version of Windows 10 Technical Preview Build 9926.
Solution
After the comparison of the two different version, the differences is the following registry:
HKLM\SOFTWARE\Microsoft\WindowsUpdate\UX\IsConvergedUpdateStackEnabled
In clean installation version:
In upgrade version:
The method to make Windows Update show in Control Panel in the clean installation of Windows 10 Technical Preview Build 9926:
Edit the REG_DWORD value of IsConvergedUpdateStackEnabled from 1 to 0.
Applies to
Clean installation of Windows 10 Technical Preview Build 9926
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

We’ve seen a few forum posts talking about changing registry keys to alter the update experience we shipped in Technical Preview build 9926. There are a couple of reasons that we don’t recommend doing things like that.
First, the default experience is what we’ve tested across not just the Windows 10 team, but across all of Microsoft before we released it to you. That doesn’t mean that you won’t still find bugs, but it’s definitely the code that’s been most thoroughly
tested. Changing things back to older versions is risky because the combination of those old settings with the rest of Windows 10 is not something that’s been validated or supported, so we can’t predict the side effects. It’s possible that changing registry
settings related to update could cause a machine to no longer be able to get new updates or Technical Preview builds.
The other reason to avoid changing the default update experience is that a lot of update-related code is actually being re-written in order to scale across the variety of different device types Windows 10 will support. Since Technical Previews are
a work-in-progress, some code that may still be in build 9926 won’t actually ship in the final version of Windows 10 that we provide to all our customers, so trying to re-enable that code temporarily won’t provide a way to accurately assess Windows 10’s update
capabilities.
We want to hear your feedback! We’re sharing Technical Preview releases early so we can understand exactly how customers are using our software and make sure we are designing our experiences to address those scenarios. The more
specific the feedback, the more helpful it is for us – saying “I hate the new Windows Update UI” isn’t very useful, but when we see “I need to be able to tell Windows Update to grab updates from WU itself and not from my internal corporate server, so the new
Windows Update UI is painful for me”, we can actually understand what changes we could make to solve those specific problems. We can’t promise to fix everything that everyone asks for – and sometimes what one customer wants is exactly what another customer
doesn’t want – but the more you can help us understand why you want something changed, the better we can try to meet those needs.
Thanks for listening, and we look forward to hearing your responses.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/warning-disabling-the-new-windows-update-ui-may/dc846517-eca0-4960-b0ff-1eb7227223f5

Windows 8 Clean/Custom install?

This: Clean/Custom install? (Boot from DVD in mac is selected from Option key display of the DVD)
http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/how-do-i-cle an-install-after-alreadu-upgrading/871d8c8d-e56f-426e-a456-a87735161759
Leads to this from Microsoft.
http://windows.microsoft.com/en-US/windows-8/clean-install
In another forum entry, I was wondering how I could have done clean vs. update install of $39.99 Windows 8.
MSoft above calls it a Custom install which has to be what I did.

Did you have a previous installation of Windows, if yes, which version.

Have Upgrade Graphic Card Driver, But Still Cannot Adjust Screen Brightness and Sleep Button Not Showing After Clean Installation of Windows 8.1

I have done clean installation of Windows 8.1 on my HP Pavilion G4.
Then I realize that I cannot put my computer on sleep mode and cannot adjust screen brightness.
I understand that those problems caused by the graphic card driver.
My computer is running on AMD Radeon HD 6400 series.
Thus, I manually search on internet and found a latest graphic card update on microsoft site that is claimed compatible on windows 8.1 (link: http://msdn.microsoft.com/en-us/library/windows/apps/dn344644.aspx).
I've upgraded it into the latest one. I've check on Device Manager, the driver is running well.
But my problem did not solved!
Please give me the solution!

Hi,
How about go to Device Manager, then uninstall Graphic driver and restart your computer, system will install its build in graphic drver. You can have a try.
In addition, access to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Brightness and set its value to 100 for test.
Roger Lu
TechNet Community Support

Satellite L500-128 - Clean installation of Windows 7 64bit

hello guys. I want to make some questions
I have windows vista in my laptop and I want to make a clean installation with windows 7 64 bit. I have seen that drivers are ok in the site. So here are my questions
a) should i delete the hidden recovery partition or not? (eisa config if i remember correct)
b) I have taken 4 dvds with toshiba recovery disc creator. If I erase every partition in the laptop how can I restore my DVDs? With a programme in Windows or just setting bios to boot from dvds and then the procedure is automatic? Is the first dvd bootable?
thanks in advance and sorry for my english

Hi buddy,
> so the disks i took backup what is it?
I assume you mean the Toshbia recovery disk. Right?
If yes this disk contains an image of factory settings. That means if you use this disk and install it, you have the same settings as you purchased it. So its called recovery disk / factory settings.
The recovery disk will always work. You can create 10 partition and/or install Linux. The recovery disk will always work and restore factory settings. With this disk you are on the safely side. :)
Furthermore the recovery disk doesnt contain programs that you have installed yourself. You can install what you want but the content on recovery disk is always the same.
> so where is the partition that the toshiba programme made backup???
To be honest this question isnt clear and detailed.
Generally the installed programs from Toshiba dont create a backup autmatically.
If you mean the HDD recovery option, the folder with this content and files is stored on the second partition in folder HDDrecovery. As I already wrote, the files are always the same and have nothing to do with the programs that you install. If you delete this folder, you cant use the HDD recovery option anymore.
And Windows recovery environment has nothing to do with Toshiba. You will find this feature on all Vista and Windows 7 computers. But both versions are completely different.
Last but not least if you want to create a backup of your current settings with all installed applications, tools, etc. you have to use an additional backup software like Acronis True Image. It creates also an image but of your current settings. ;)

How to do a clean installation of windows 7 on hp touchsmart 300-1000

My hard drive recently crashed in my touchsmart 300. I have purchased a new one but when I insert the installation cd it shortly freezes on starting windows screen right after it installs the windows files for the first time. I have recently read threads about this and saw the safe mode option and disabling the video driver but I can not get to that screen. After I hit any key to boot from dvd i tap F8 and it starts loading windows files, then when it is done it gives me the option to run in safe mode then installs files and freezes again. Can somebody please help me!!!! I am going on over a week straight trying to fix this. Thanks

The title says Windows 7 but the description of what is used to start does not sound right. According to this PDF for the model posted: http://h10032.www1.hp.com/ctg/Manual/c03472361.pdf
Go to page 56 under "Starting system recovery from user-created recovery discs
This section contains the procedure for performing a system recovery from the recovery discs you created"
If Windows 7 is installed, the F8 should get the user into Safe Mode. Remove the Recovery DVD from the DVD drive before this action is done. What happens now?
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Error in Deploying java components - SAP NW CE 7.2 installation on Windows

Hi,
I am installing NW CE 7.2 on a windows machine. I opted for custom installation. I get the below error at "Deploy java components step. Any clue on why is this happening and how to resolve ?
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.2 Developer Edition > Install > Custom Server Installation( Last error reported by the step :Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW72\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jce.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner deploy -l "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/deploy.lst" -e stop -u lower -w safety --lcm bulk -t 14400000 --host L-156007555 --port 50004' aborts with return code 104. Error message is 'undefinedStatus:AlreadyDeployedDescription: 1. Already deployed component has version:1000.7.20.1.0.20091117001100. SOLUTION: Check 'undefined' and '' for more information.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM. </body></html>
Regards,
Rukmani

The below msg is from sapinst_dev.log
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.2 Developer Edition > Install > Custom Server Installation( Last error reported by the step :Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW72\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jce.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner deploy -l "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/deploy.lst" -e stop -u lower -w safety --lcm bulk -t 14400000 --host L-156007555 --port 50004' aborts with return code 104. Error message is 'undefinedStatus:AlreadyDeployedDescription: 1. Already deployed component has version:1000.7.20.1.0.20091117001100. SOLUTION: Check 'undefined' and '' for more information.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM. </body></html>

Ei.cfg not being seen by windows installer on Windows 7 Home Premium 64 bit retail disk.

My problem is that the retail disk of Windows 7 Home Premium 64bit has no ei.cfg restrictions. Instead of choosing the correct operating system ID, on install, the .cfg
is coming from some where else installing a custom version of windows that is a different version of windows than on the retail install disk that I have a software key to. Even though it recognizes the key as windows 7 the operating system no longer recognizes
the retail disk it was installed from as the same version of operating system. It seems that there is a pre operating system install to a volume that cant see the ei.cfg file on the windows retail disk. It is something like Windows ME or MCE and it is hard
to get past because it acts like the operating system after install. It looks like there is a complete install of windows 7 but it is only a version of ME or MCE in the 100MB range installed to a partition volume. I am given a User account Profile within
Application Data folder in the system. The actual windows system in its entirety does not exist in the partial virtual operating systems. All the installs are to Partition Volumes on the Partition of a GPT Server Partition on a Disk
on the Hard drive. All Virtual.
Windows 7 Home Premium 64bit and 32bit retail disk is GSP1RMCHPXFRER_EN_DVD. The bios version on my Asus G75VX is American Megatrends version 206, V Bios version 80.04.97.00.13.N62G75500, EC version B14E140001. The operating system version is not the same
as the install disk. The boot configuration is; American Megatrends Bios Aptio Setup Utility installed. :\\?|GLOBALROOT\Device|HarddiskVolume1\EFI\Microsoft\Boot\BCD.Backup.0001 Software build after install is Buildlab 7601.Win7Sp1_rtm.101119-1850 Client install
BuildlabEx 7601.17514.amd64Fre.Win7Sp1_rtm.101119-1850, CSD Build Number 1130, Product ID 00 359-112-0000007-85245, Product ID 55034-112-0000007-05640. System Reserved Partition Volume X:\{F750E6C3-38EE-11D1-85E5-00C04FC295EE} MININT-F26UD4N. Link to 170MB
.reg file in text format http://1drv.ms/1m9RXL7.
The above information was taken after an install from the Microsoft Windows 7 64 bit retail disk purchased at Fry's and installed to my Asus G75VX. It is a Network Managed Client Server configuration that installs from the retail disk.

I have been dealing with this problem since the day I purchased the first notebook from Best Buy configured this way and it was not even an Asus. It was a Samsung Chronos i7. The Asus G75VX I have now is the third notebook in a row purchased from Best Buy
with the configuration right out of the un open retail box. None out of the three came with windows 7 installed. They had windows 8 64bit installed with the configuration. I purchased Windows 7 Home Premium 64 bit attempting to get around the configuration
problem.
My main concern is that I use computers to do my legal documents in court cases in the United States Federal Courts and I am a pro se litigator and I have been litigating a civil action since 2011 that is still open in the federal court. I am also legally
disable and covered by Federal Communications Act FCC Rule 255. This configuration has Telephone software and equipment, Management Software and equipment, and Networking software and equipment all covered within FCC Rule 255. My notebook is unusable for litigation
or personal use as a Publicly Managed Network Client Server. I paid $1350.00 of my Social Security Disability income for the Asus G75VX and another $216.00 for Windows 7 Home Premium 32 and 64 bit DVD and that is not counting a list of other things to
now have a personal notebook computer I have to sat down beside me in public libraries, Colleges etc. to use their computers to do my legal work. It is illegal and total wrong and it is a violation of the Bill of Rights First and Fourth Amendments and Title
VI of the Civil Rights Act of 1964 and the American with Disability Act outside of 255.

OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs

on Create Domain Step
I have been trying to install OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs on Create Domain Step.
Java is installed on root director. I have incease the Java Memory to 2084MB. Still hangs. I have also tried software only install and that also fails at Start Admin server step. I have also tried to configure thru Config.bat file and it does not recognize the weblogic server. Any help is appreciated.
Here are the log files.
[2012-05-06T16:38:13.288-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning value:false to variable:WLS_SINGLE_SERVER_INSTALL
[2012-05-06T16:38:13.350-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_HOSTNAME) to:suman-HP. Value obtained from:USER
[2012-05-06T16:38:13.397-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Using custom properties file oracle/as/install/bi/config/consumer.properties
[2012-05-06T16:38:13.709-04:00] [as] [TRACE:16] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] [SRC_CLASS: oracle.as.install.bi.biconfig.BIConfigMain] [SRC_METHOD: doExecute] ENTRY
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning Port: 7001 to: DOMAIN_PORT
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Domain port set to: 7001
[2012-05-06T16:38:17.929-04:00] [as] [WARNING] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Executing a Jaxb workflow ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@fafb2f1
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.startDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@29a5ec1f
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
Ora Install Logs
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space

Hi,
Refer this SR.
SR 3-5457356311: unable to create weblogic domain in windows 7 SP1 home edition 64 bit
Earlier i have face same issues.after 4 attempts its got resolved.make sure below points
static ip set it properly (windows/hots,etc files) make sure u r pc have full permission for installation user
1.Un-install WebLogic from your machine.
2.If the installer is on a network drive it's recommended to copy the generic installer to your local file system and to a folder with no spaces or strange characters.
3.Remove the system variables you've set: JAVA_HOME, JAVA_VENDOR, and remove the %JAVA_HOME%\bin from the path system variable.
4.Run the installer as follows:
5.Open a command prompt
6.Change directory to \JDK_64\bin folder and execute:
like below,
C:\>cd C:\java\bin
C:\java\bin>java -D64 -Xms1024m -jar E:\Share_DEV\OBIEE11g_Latest\wls1035_generi
c.jar
run it now
Extracting 0%.....
Thanks
Deva

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

11g R2 Custom Installation

I have been asked to install and test Oracle 11g ODBC driver to connect to 11g DB for a legacy application and I'm trying to have a minimized installed. I am new to Oracle FYI. I am using Windows 7.
If I select Custom Installation Type and select 'Oracle ODBC Driver' only, do I need any other components to test this connection from .Net or Toad?
I have seen an Instant Client with ODBC installer but I am not sure which direction to go.

Hi,
If you do a Custom installation and select ONLY the ODBC driver, it will also install the dependencies (ie, Oracle client) along with that, which will give you all the pieces you need to connect to a remote Oracle database. You'll need to create a tnsnames.ora file manually (or copy one) though if you're going to use tnsnames.
I'd recommend though, if you go that route, to also install sqplus at the same time, as then you'll have a way to confirm client connectivity outside of ODBC.
Instant client would also work, and be much smaller, but it's a little trickier as far as the setup goes.. nothing drastic, but going the OUI route instead it will pretty much "just work" after the OUI finishes. http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html
Hope it helps,
correction/comments welcome.
Greg

Custom Installation for non European languages

Hi,
While installing JRE (particularly 1.4.2_XX ) in custom mode, second option enables user to support for additional languages.
The disk size requirement is 18 MB but after installation i figured out that it takes ~8 MB.
As per documentation at http://java.sun.com/j2se/1.4.2/docs/guide/intl/locale.doc.html#jfc-table , it states that JDK on windows has language support installed as a default but for JRE custom installation is required.
I have following question related to this installation
- What files are updated with this installation? I found few files e.g. charset.jar , font files are installed within JRE installation directory.
- Does this installation updates/adds any Windows System files/font/registry?
The question has arrived as our Swing application hangs with JRE and works fine with on JDK on event of inserting thai character into JTextPane.
Any help will be highly appreciated!!!
Thanks,
Advait

Hello Advait,
The custom feature you are refering to is related to this RFE:
4508848 "Small" J2RE for Windows should include Western European languages
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4508848
It implies selecting "support for additional languages" would include lib/charset.jar and lib/ext/localedata.jar.
This feature was also described in http://java.sun.com/j2se/1.4.2/changes.html
Internationalization
The following changes have been made to internationalization functionality in J2SE 1.4.2.
* Installation of the J2RE on Windows has changed, with impact on the supported locales. There now is a single installer, which by default installs a runtime with support for European languages if the Windows host system only supports such languages, or a runtime with support for all languages if the Windows host system supports at least one non-European language. Users can request installation of additional languages in a custom setup. For complete information on which locales and encodings are supported with which installation, see the Supported Locales and Supported Encodings documents. For general information, see internationalization.
Regarding your second question, I received the answer from our install engineer:
Yes, the installer creates many registries, and we copy java.exe/javaw.exe/javaws.exe to the Windows system directory.
I am not sure why your Swing application hangs with JRE. Did you select the "support for additional language" option during installation? (I assume you did, correct?)
thanks,
miko

BOE XI v3.1 Custom Installation

Running a Custom installation of BOE XI v3.1 is forcing the use of MySQL as our CMS database. One of the first installation screens has us choosing "Custom" or "New" installation.
But there is no possibility of choosing an existing database server with the "Custom" install.
According the installation guide, pg. 73, we should be able to use an existing database server for the CMS with a Custom installation.
We would like to use SQL Server and have set up the database and ODBC. There is no problem configuring this when we try a "New" installation, the problem only occurs with the "Custom" installation.

Yes, I think we did select "Enable servers upon installation". On the "Please select which features you would like to Install" screen, when selecting to install "Central management Server", we expanded the Central Management Server and for MySql selected "Entire feature will be Unavailable". Look at page 69, step 3 of XI3.1 installation guide for Windows.
Mike
Edited by: Michael Isaac on Feb 25, 2009 3:24 PM

Grid Infrastructure installation on Windows 2008 R2 problem

Hello there,
I tried to install Grid Infra 11gr2 on windows 2008 R2. I followed all the documentation, but i'm unable to install it. It always end with an error at the grid configuration step (OracleOHService ends unexpectedly, ohasd log says "caught exception"). I've got an SR opened, no answer for the moment ...
Did someone a least managed to install grid infra on 2008 R2 ?
It is certified, 2008 R2 is mentioned in the documentation, this is not my first RAC installation on windows (10g, 11gr1 on 2003, 2008 R1). But this time I'm totally stuck.
PS : I love Linux.

Make sure you have the shared storage configured correctly, on either Oracle ASM or OCFS for Windows. In my testing, i used a storage cabinet and iSCSI to connect to the disks.
If you have attempted to install Grid once, then before attempting another installation, you must clean out the failed installation (http://download.oracle.com/docs/cd/E11882_01/install.112/e10817/rem_orcl.htm#CHDGBBIJ) and zero out the disks used by Oracle ASM. Also, use the asmtool to mark the disks so that Oracle ASM can identify them correctly.
Also, make sure that Microsoft Clustering is disabled (and preferably not installed) on the servers you are using in your Oracle cluster.
Most of the time, a failed installation is due to the shared storage not being configured correctly, or being configured so that it works during installation of Oracle Grid, but once the server is restarted, Oracle Grid fails to start.

Silent install Air Runtime and Air App with custom installer?

I want to use a custom installer that will perform some actions, and then silently install air runtime and an air application. The goal here is to be able to perform a customized install for an Air application (for a user that might not have Air installed) without confusing the user with multiple install screens. Can I use a custom installer to silently install Air (if the user doesn't have it installed) and the Air app? If so, are there any restrictions on the custom installer? If there are any examples of this, please provide the links.

Since you applied for the distribution from Adobe you should
have received a link to a page where you can download what they
call the "side-car" installer. It's basically an installation
system they are making available to developers that can be easily
configured to deliver a bundled runtime and application
installation for Mac and Windows.
Check your email again and see if you can't find a link in
there pointing you to a download page for the AIR runtime as well
as the aforementioned side-car installer. For those who don't know,
here
is where you can apply for a redistribution permit for AIR.
I have a small tutorial posted that might be of help to you
on my blog:
http://blog.arnimaack.com/flex-air-series-4-air-all-in-one-installers-on-CD-DVD

Clean (Custom) Installation of Windows 8.1

Similar Messages

Maybe you are looking for