Clean install and Mail/itunes

I want to do a clean install and wipe my hard disk etc but I then like to put on my old mail and itunes library etc. What do I have to do that i.e. what folders do I need to bring back from Time Machine. And where do I put them etc?
Thanks

I had to reinstall Leopard for reasons unrelated to Leopard. When I did this reinstallation, the vertical quirk went away. Very strange.

Similar Messages

Clean install and iPhoto/iTunes

I will probably do a clean install with Snow Leopard (format my hard disk and install Snow Leopard). I have backups of all my data and I know which applications to reinstall.
However, I am wondering about my iPhoto and iTunes libraries, I do not want to add all those faces again to my photos or lose the stats for my music and such... so my question is, how to I keep those?
Could I just restore the iPhoto library from a backup since all my photos are actually in it?
And what about the iTunes library? I have my music on an external hard drive, so I guess the library just links to those files. How do I not lose my stats like "last played", "play count" and such?

I do not want to add all those faces again to my photos or lose the stats for my music and such... so my question is, how to I keep those?
Drag the iTunes and iPhoto libraries from the Music and Photos items in the Finder's sidebar to the external drive, and put them back when done. If the entire iPhoto library has been backed up, that'll work.
(46839)

How can I remove all my preferences and settings from mail and do a clean install of mail app?

How can I remove all my preferences and settings from mail and do a clean install of mail app?

Open mail > Preferences > Accounts
Select the account and click the minus button at the bottom of the column.
Quit mail
~/Library/Preferences/com.apple.mail.plist move this file to the trash and empty it.
~/Library/Mail/ and move all of the items in that folder to the trash and then empty it.

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

HT1923 I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit. I keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinst

I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?

I've installed and reinstalled iTunes 11.1.1 for Vista 64-bit yet keep getting the message "iTunes was not properly installed. If you wish to import or burn CDs you need to reinstall iTunes." I meticulously removed all traces of iTunes before reinstall as recommended and instructed step-by-step on Apple's website. Any ideas how I can get around this, anybody?

Clean install and restore from Time Machine: Will i lose my applications ?

I want to do a Snow Leopard clean install instead of a an upgrade.
1) How do I do the clean install and restore it from Time machine during the install ?
2) If I do the clean install and restore from Leopard's time machine backup, will I retaing all my applications or I will only retain my personal files ?
- If I don't retain my applications, how will my photos in iPhoto be restored without iPhoto ?

If you did a complete TM backup, then all your files, users, settings, and programs will be restored. You will have the opportunity to restore using TM at the end of the install. I would back at least my data up separately.
To erase and install (i.e., clean install), start up to your DVD and stop after selecting your language. Use the menus to start Disk Utility and erase your drive. Quit Disk Utility and proceed with your installation. At the end, you will be able to choose to reclaim your settings, files, and apps from TM.
Message was edited by: donv (The Ghost)

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2

HT1349 Ive just purchased a new pc and installed and authorized Itunes for the fifth and final time. What do I do if purchase another device and need to authorize Itunes again ?

Ive just purchased a new pc and installed and authorized Itunes for the fifth and final time. What do I do if purchase another device and need to authorize Itunes again ?

You may find these Links informative...
http://support.apple.com/kb/HT4627
About authorization and deauthorization

Clean install and transferring applications

I just bought a brand new MacBook Pro a year and a half ago with the top performing quadcore i7 with 8GB of RAM. Ever since I upgraded to Mountain Lion from Lion. I have had some serious performance issues. I have already done a time reinstall and still have the same performance problems, which is pretty poor and a very hot core. I have read that doing a clean install and transfering file from the TM results in noticably better performance. I have never done this before so I like to know the risks and can I transfer my applications (pages, keynotes, word, powerpoint, ect.)

Yes, that is an option although you will need to take care you do not restore from backup something that is the direct cause of your problems.
All your applications may be reinstalled from the App Store or installation DVDs depending upon where and how they were purchased.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Clean Install and Software Restore CDs

Hi,
I have had my iBook G4 since February 2004. Yesterday I did a Clean Install and completely erased my HD. I used Install Disc 1 and 2. However, I was never prompted to insert Disc 3. Did I miss something?
Also, I also found the 8 Software Restore Discs. What exactly is "software restore"? After reading the pdf file and searching around these boards, I still could not find a definitive answer. What software is restored? The only application I seem to see missing is GarageBand.
Thanks,
DBDevil

Any software that you are missing from when you first got your ibook brand new should be there. It should also give you the option of which ones to install and such.

Clean install and migration of only one or two program

How does one do a clean install and migrate only one or two applications.

I don't believe there is a "clean install" on the Snow Leopard disk if you launch the install from your standard system boot. I believe you need to:
1) Put the SL disk in the machine drive.
2) Restart your machine.
3) Hold down the 'c' key during startup, to boot from the SL disk.
4) Once the system boots up, it starts the Snow Leopard install process. However, you have a menu bar where you can run several system utilities, such as Disk Utility.
5) Run Disk Utility and erase/reformat the main system harddisk. This will give you a "clean" disk to install Snow Leopard on.
6) After Disk Utility finishes, proceed with the install process.
7) After intallation of Snow Leopard, restore any apps/data you want from backups and/or original installation packages.
Hope this helps,
j0hn

HT201210 Itunes update failed to install and now Itunes won't run

Itunes update failed to install and now Itunes won't run

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Did a leopard clean install and restored via time machine

Hi
Just done a leopard clean install and restored data via time machine, now when i run time machine i cant go back in time to restore other bits and bobs, any ideas
thanks

This is not meant to be a snide comment, but I use Carbon Copy Cloner and Super Duper not TM. Used TM for a while but got tired of it, changed to CCC and then when Super Duper was updated for Leopard moved back to SD. I like it because (both SD and CCC) can be scheduled for whenever you want to run it and it only backs up files that have changed since last update. It also produces a bootable disk.

IMac Clean install and now won't install Lion 10.7.5

My mid 2007 iMac was haveing trouble connecting to the internet via a browser and I took it into the Genius Bar and their only suggestion was to do a clean install and then see what happens. I wiped the computer and tried a clean install. It wouldn't install OS X 10.7 Lion (which this computer was previously running). I took it back into the Genius Bar and they had to install 10.6 Snow Leopard. And now it won't upgrade to Lion (that it used to run till it started having problems).
What's going on?
Now, 3 weeks later, on our other mid 2007 iMac is starting to have the same issues.
Is there something wrong with the OS? I go to network diagnostics and it says it is connecting to the internet just fine. But it won't connect via a browser or do software updates.
I go to Airport Utilities and it wants me to forget the AirPort Extreme. Exact thing happened on the other iMac and I couldn't ever recover (or discover) the Extreme.
Help !!!!!!!!

You mean 2011 or do you mean Mountain Lion? Lion came out in mid 2011 and ML in 2012. And yes, 7,1 is the model identifier. Here is something I found on running the current OS:
From this site:
http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.0-20-inch-alu minum-specs.html
Did you try recovery?
Not sure if your machine would be able to qualify for the recovery disk assistant (since yours would need the assistant to create a recovery partition)
http://support.apple.com/kb/DL1433
If that works, you should try using the recovery option (hit Command + Option + R during restart) to connect to Apple's servers and reinstall Lion.

I did a clean install and lost all of my iweb data and settings. My site is up and published through yahoo's server. Is there a way to retrieve/import so I can make changes?? HELP!

I did a clean install and lost all of my iweb data and settings.
My site is up and published through yahoo's server.
Is there a way to retrieve/import so I can make changes?? HELP!
Can I do this through wordpress or using html code?
Thanks!

Is there a way to retrieve/import so I can make changes?? HELP!
It's often asked and answered.
Search this forum for similar disasters : lost iweb file
The answer usually is No. You'll have to start from scratch. Unless you have a backup.
Can I do this through wordpress or using html code
No.

Clean install and Mail/itunes

Similar Messages

Maybe you are looking for