Clean Install G4 Dual 1 GHz-Not enough Disk Space Error? -SLOW USB copies

HELP puhleeeeze!
This seems to be an issue on various sites with no one being able to figure out what is the cause and a solution. One person stated his problem went away with a fullwipe and clean-reinstall of everything. But this is what I did already. 
What is the reason for the "Not Enough Disk Space" error message when both my hard drives have gigs of space available. If I had hair I'd be pulling it out by now!   When trying to copy a file to my 2 internal hard drives that have a lot of space available, but only by the USB port?!!
I have a Power Mac G4 Mirrored Door (MDD) Dual 1 GHz with a clean install of 10.5.8 from the Original Mac OS X Leopard DVD. Both internal hard drives are 60GB and 100GB. The hard drives were wiped clean with Disc Utilities and reformatted to Mac OS Extended (Journaled). The Power Mac only has the OS and a few music apps installed. Easily over 30 GB of space left on the the main G4 interal hard drive and about 75 GB on the other internal hard drive.
The error seems to only happen when I connect a USB flash drive to the USB port. I tried to copy a 50MB update to the desktop-"Not Enough Disk Space" error message happened.
I know that the G4 MDD Power Macs only have USB 1.0. Is this a USB 2.0 issue? Another issue is that it has very slow USB speed (dramtically slower than normal USB 1.0 copying of files. And this is only when it is successful. Is it a USB format issue? I know I couldn't get an external USB 2.0 drive to mount on the Power Mac at all. Disc Utilities could see it but it still would not mount. I have a friend who has an older G4 single processor Mac that doesn't experience these issues with its USB 1.0 ports.
Now here's the kicker:
If I put in a CD disc in the DVD/RW drive, it copies with no problems to either hard drive. If I connect to the Power Mac  via the ethernet network, files can copy with no problems. But any USB connection -  I get a the "Not Enough Disk Space" error message. I know this is an old mac... but it's never been problematic until this latest wipe and update to Leopard 10.5.8.
Is there a solution to this? Any and all help, feedback, comments, thoughts are greatly appreciated in advance!!!

Hello everyone,
Ok, I did the ultimate task. I erased the hard drives, AGAIN. Just to start fresh from scratch. Hard drives were erased. Did a new install of Mac OS 10.5. And all was well. I could copy with no problems. I gave the computer to my friend and all was good for a couple of days and then the issue came back again. He couldn't copy anything to his internal hard drives and we received the "Not enough disk space" error message! I was baffled. A complete hard drive erase 2 times, 2 fresh Mac OS 10.5 installs and it works for a few days and then coping to HD we got the same **** problem again! THEN - I remembered that the PRAM battery was dead on this G4 Mirrored-Door Dual 1GHz PowerMac. I had recommended that he get a new battery, because this computer would always have the incorrect date and time after every restart. So with recalling this, I had him reset the PRAM by holding down the CMD+OPT+P+R keys after a restart (start-up Chime). I had him hold the keys for at least 3 start-up-chimes. Soon as the G4 Power Mac started up everything was fine again. He was able to copy files to his hard drives again with the "Not enough disk space" error message.
So everyone! Try zapping your PRAM (resetting the PRAM) and see if this solves your problem. I told my friend to get a new PRAM battery to replace the old one that is completely dead. I have not heard back from him.  I will ask him again if the problem has come back.
If that fails: My only other solution would be to consider that it is possible that Mac OS 10.5 has a conflict or issue with the G4 Processors and maybe it is safer to install Mac OS 10.3 or 10.4. Because this problem only has occured after installing Mac OS 10.5, the highest version of the Mac OS the Dual 1GHz Mirrored-Door G4 can be installed.
Cheers,
B

Similar Messages

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • "Not enough disk space" error installing XP SP3

    Just installed Bootcamp on a MacBook Air running 10.5.3. (Actually, it was a reinstall on an XPSP3 partition that began refusing to boot.)
    Bootcamp install went fine. XP Pro SP2 install also normal.
    Installed my standard suite:
    - AVG Free virus protection
    - Firefox
    Ran Windows Update. Got XP SP3 downloaded. Got this error on SP3 installation:
    There is not enough disk space on C:\WINDOWS\$NtServicePackUninstall$ to install Service Pack 3 Setup requires an additional 4 megabytes of free space or if you also want to archive the files for uninstallation,Setup requires 4 additional megabytes of free space. Free additional space on your hard disk and then try again.
    There's 7 GB free out of a total of 11 on the Bootcamp drive.
    Tried Add/Remove programs. I'm getting the option to remove just a handful of stuff, including Firefox and AVG. (No surprise, since that's just about all that's ON the drive at this point.)
    BTW, Bootcamp is fully up-to-date thru Apple Software Update utility in XP.
    ***?

    It has been mentioned in various threads, since SP3 came out, but here is the fix:
    http://www.windowsreference.com/general/error-there-is-not-enough-disk-space-whe n-installing-sp3/

  • Not enough disk space error

    I have a macbook Pro with 640gb. I barely used any of the HD space and keep getting the "not enough disk space" anytime I try to download anything. Any help to resolve would be appreciated. Thanks

    OmniDiskSweeper
    https://www.omnigroup.com/products/omnidisksweeper/
    maybe you have pending backups being held.
    maybe you had a disk drive problem and instead of writing data to the disk, it was actually written to
    ./Volumes/"mydiskdrive -1" instead of "mydiskdrive"
    Direct you to the proper forum for MacBook :
    MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forums
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • Not enough disk space error - but not rea

    I have a Nomad Jukebox 3 - no really. It runs like a champ!? I use it most often for recording 44KHz audio. I just did the auto-update thing for the mediasource and plugins, blah blah blah. Now I can't sync a large recording (about .4GB)?to my computer. It gives me this error:?There is not enough disk space at the destination for this transfer. this is obviously a bug because it was working before the update. Please HELP!!

    I have the same problem - a Jukebox 3 which usually refuses to transfer files over about a gig.
    My old system disk was 30Gb, and it always worked OK with that, but when I reinstalled everything on a 20Gb disk, I got problems. I slightly suspect it may get confused when it checks for disk space by a disk that's a lot bigger than was available back when the Jukebox 3 came out. If anyone knows how to fix this I'd be most grateful - last time I had to record the audio in through my soundcard!

  • "Not enough disk space" error using Burn

    I'm using a brand new Macbook Pro and trying to burn a 60-minute CD (.wav files) using the Burn app. but it keeps telling me there's not enough disk space when i have over 220 GB. can anyone help fix this or point me to a Burn guide? i couldn't seem to find one. thank you for your time!
    -Mike

    Hi PGVPGV,
    It is not altogether clear to me which process you are following here.
    To duplicate a CD using Disk Utility's "Burn" process:
    1) Open Disk Utility, insert the CD or DVD disc in the optical drive, and select it in the list at the left.
    2) Choose File > New > “Disk Image from {disc name}.”
    3) Type a name for the disk image.
    4) Choose “compressed” or “read-only” from the Image Format pop-up menu.
    5) Choose “compressed” to create a smaller disk image. Choose “read-only” to create a disk image that’s quicker to create and open.
    6)Click Save.
    7) After Disk Utility creates the disk image, eject the original CD or DVD.
    8) Select the disk image in the list at the left, and choose Images > Burn.
    9) When the Burn Disc dialog appears, insert a blank CD or DVD, and then click Burn.
    (The above is pretty much straight from the Disk Utility Help files)
    It sounds to me as if you may be using an incorrect disk image format at the image creation stage.
    Just to be clear, too, is this an audio CD that you are trying to copy , or a data CD full of Wav files?
    Cheers
    Rod
    Message was edited by: Rod Hagen

  • Cannot Install CS6 Web & Design Trial...Not enough disk space?!

    I have tried downloading through installer and direct downloads and I get the same message when trying to extract the files. I have 264 gig free on my HD is this not enough?!

    I have tried freeing up space, cleaned and defragged HD, one thing I am not understanding is the memory I see when I start the task manager.
    Physical Memory
    Total 3990
    Cached 1766
    Available 1754
    Free 34
    Im guessing this is my Ram, with only 34 Free is that Why I am getting the not enough disk space error?

  • Exporting to external harddrive "not enough disk space"

    imac   Mac OS X (10.3.9)  
    I'm having several problems while trying to export my entire iphoto library as a backup to an external harddrive...
    The main on is I am getting a "not enough disk space error". There is 95 GB available on the harddrive and the library is approximately 20 GB.
    I've been doing it in smaller increments b/c I thought it might be an issue of not enough space on my mac's harddrive as I only have like 6GB left (the reason I'm backing up and deletiing photos) but it gets to a certain point and then says no more.
    I've been using the export function, but I've also tried just dragging and dropping them and get the same error.
    I'm runnning iphoto 4.0.3.
    Of course I've tried restarting to no avail...
    Any suggestions would be welcome...
    Another issue is the filenames. Of course many have the same names from the camera. Is there a way to get them to automatically put them in folders on the harddrive. I've been doing this manually and it's tiresome.
    Finally, is there a way to get it keep the "date created" information. When I look on the harddrive it says they were all created 12/31/1903! That's going to make it very difficult to find something later should I need it...
    Thanx so much!
    JT

    < The library is like 30 GB while the pictures are only 20GB.>
    If you have rotated, cropped, or edited any pictures in iPhoto, the originals are all kept inside the iPlibrary in case you want to "revert to the originals"... it's good to know it's there, but you are less likely to revert to an original, since there's a reason you edited the pics in the first place.
    Anyway, those originals are taking "wasted space" in your iPlibrary.
    If you want to reduce the size of the iPlibrary from 30GB to close to 20GB, (because the thumbnails will remains and must), then you should get rid of the superfluous duplicates! I did.
    if you want to clean you iPlibrary and get rid of duplicates, you can use iPhoto diet. Free download.
    My advice, is do a drop and copy the entire iPlibrary to the external, as suggested by eww, because imagine a day, when the internal HD iPLibrary crashes on you, and becomes not salvageable, you will have a mirror copy, to copy back to your internal drive, with all it's albums, names, favorites ,star ratings etc....... If you export to the external HD, and if your iP library crashes on you.... you are to re-import from scratch.... and you will go %#%^&$&@$$@#
    I have been there myself... now I have 3 differents external HD that I back up to. 9 different iPlibraries, and 3 copies of each on 3 separate HD..... Photos are too important to me.....
    Reading this discussion group, you see many people writting thing such as "my library is gone what do I do?"
    it's not a matter of if but when!
    You be the judge...
    Michel

  • OS X Mountain Lion Install - Not Enough Disk Space

    I am installing OS X Mountain Lion.   The download went fine.   It rebooted and began the install then failed because there is not enough disk space.  The solution is obviously to make more room on the disk. 
    The problem is that everytime I boot my Macbook now, it takes me immediately into the installation for OS X Mountain Lion.  I cant seem to get back into the OS to clean up disk space.  
    Is there any way to force my Macbook to boot to Snow Leopard again?   If not, is there any way to clear up disk space from within the OS X Mountain Lion installer or the OSX Utilities?   I'd prefer not to have to wipe my entire Macbook and restore from backup then go through the upgrade again after freeing up disk space.
    Thanks,
    JG

    Can't be that, [64bit] as this MacPro I have is fully capable, and is running 64bit.
    In fact, as far as memory serves, this one I bought [B.T.O. option] was one of the 1st 64bit offerings made available.
    But thanks for weighing in …
    Anyone else have a suggestion?
    Mac Pro
    MacBook Pro
    Hardware Overview:
      Model Name:    Mac Pro
      Model Identifier:    MacPro2,1
      Processor Name:    Quad-Core Intel Xeon
      Processor Speed:    3 GHz
      Number Of Processors:    2
      Total Number Of Cores:    8
      L2 Cache (per processor):    8 MB
      Memory:    24 GB
      Bus Speed:    1,33 GHz
      Boot ROM Version:    MP21.007F.B06
      SMC Version (system):    1.15f3
    Hardware Overview:
      Model Name:    MacBook Pro
      Model Identifier:    MacBookPro3,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2,4 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache:    4 MB
      Memory:    4 GB
      Bus Speed:    800 MHz
      Boot ROM Version:    MBP31.0070.B07
      SMC Version (system):    1.18f5
    Even the graphics capabilities, are in the favor of the MacPro, which I opted for:
    ATI Radeon X1900 XT, rather than the default option at the time.
    This graphics card is due to be replaced with the newer 5870 upgraded card.
    Just have not slipped it in the case, as yet.
    But even without the graphics card update, it is still better than the MacBook's graphics capabilities, surely?

  • I bought a game that has 16.66 GB and my computer has 30 GB free, however when I try to install it it says there is not enough disk space available.

    Whenever I try to install the game it says there is not enough disk space available. I have tried to delete things that take up space but it did not help.
    Game:Napoleon Total War

    30GB's free disk space is not enough. If you don't free up storage space soon, your Mac may not boot which is why you see the, "not enough disk space available" dialog.
    Control click the MacintoshHD icon on your desktop or open the Finder, right or control click startup disk in the Sidebar on the left then click Get Info.
    You'll see Available and Capacity. Make sure there's at least 15% available disk space.
    Freeing space on your Mac OS X startup disk
    Restart your Mac after deleting data to see a difference in storage space.

  • Not Enough Disk Space while installing WebLogic 6.1sp1 on AIX

    While installing WebLogic Server I get the error message "Not Enough Disk Space"
    for the root (/) file system, although I am trying to install it in the /weblogic
    file system that has enough space for the installation.
    What is that extra info that I need to pass to the installer so that installs
    the server in /weblogic and not complain about lack of disk space in /.
    The relevant properties for installation under silent mode are as listed below:
    ### BEA Home Directory
    BEAHOME=/weblogic/sftw
    ### Product Installation Directory
    USER_INSTALL_DIR=/weblogic/sftw/6.1
    Thanks and Regards
    Kapil Singh Pawar

    Hi.
    I believe the installation creates temporary files in the /tmp directory from root.
    If that is part of your root file system then this may be the cause of your problem.
    Try changing your environment variable TMPDIR or TMP_DIR. If you are doing the
    silent install with the java command line try setting java.io.tmpdir to a different
    filesystem on the command line.
    Hope this helps,
    Michael
    Kapil Singh Pawar wrote:
    While installing WebLogic Server I get the error message "Not Enough Disk Space"
    for the root (/) file system, although I am trying to install it in the /weblogic
    file system that has enough space for the installation.
    What is that extra info that I need to pass to the installer so that installs
    the server in /weblogic and not complain about lack of disk space in /.
    The relevant properties for installation under silent mode are as listed below:
    ### BEA Home Directory
    BEAHOME=/weblogic/sftw
    ### Product Installation Directory
    USER_INSTALL_DIR=/weblogic/sftw/6.1
    Thanks and Regards
    Kapil Singh Pawar--
    Developer Relations Engineer
    BEA Support

  • Not enough disk space during application install.

    Hello and thanks. I'm trying to install an application on a Windows Boot Camp partition. There are no other applications installed other than XP Pro SP2. I have about 15gb of free space on the partition. I'm getting an error that there is not enough disk space to install the application. The partition is FAT32. The application is DeLorme xMap 5.2. The free space is showing up when I check the capacity. Any ideas?

    HI...
    You need at the very least 15% free disk space. More if possible. Definitely not enough free space to install a 17GB app.
    OSX Tips Where did my Disk Space go?
    Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
    And make sure your Mac meets the app's minimum requirements which according to the App Store is Mac OS X 10.7.3 or later under Information right side of the App Store window.
    edited by:  cs

  • Receiving a "There is not enough disk space available to install the product" error in App store while I clearly have enough space?

    I am attempting to purchase Dues Ex: Human Revolution which requires 17GB to run, I currently have 27.34GB free.
    Even though I have 10GB more than the required space I still get the "There is not enough disk space available to install the product"
    Any ideas?

    HI...
    You need at the very least 15% free disk space. More if possible. Definitely not enough free space to install a 17GB app.
    OSX Tips Where did my Disk Space go?
    Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
    And make sure your Mac meets the app's minimum requirements which according to the App Store is Mac OS X 10.7.3 or later under Information right side of the App Store window.
    edited by:  cs

  • Not enough disk space to install sims 2 from app store?

    I've seen lots of threads resolving the problem of there not being enough disk space when installing sims by a CD Disk, but I'm trying to download it from the app store so none of them apply.
    I have 12 GB of space free on my macbook and the application only needs 7.52 GB.
    Ideas?
    I keep getting 'not enough disk space available'.
    I can't open it from the applications folder rather than the Disk because I haven't been allowed to buy/instal it yet.

    I have cleared 17 GB of hard disk space and 11 GB of memory space.
    The requirements online when installed say 10 GB of hard disk and 4 GB of memory.
    I bought my Mac last year so I don't think my system is too old.
    Ideas now?
    When I get above 17 GB it instals but at the end of the hour long installation it again tells me it failed to download, not mentioning space .

  • Max payne 3 "Could not complete purchase, there is not enough disk space available to install the product."

    As most people should know, max payne 3 is a pretty big game, in fact, the second biggest game I know. However, when I try to purchase it, It says that it could not complete the purchase, there is  not enough disk space. Even though, the game requires 40 GB, I have well over 60 GB. Can anyone help me?

    You're downloading a large installer package that unpacks to an even larger set of installed files. There has to be enough space for both at the same time, plus a margin of safety to avoid the risk of a boot failure. You would probably need at least 80 GB of free space, maybe a little more.

Maybe you are looking for

  • Default Incoterms & terms of payment - PO

    Hi Experts, I have created the SC with prefered vendor, which will converted to fixed vendor later in SC using the doc change BADI. But the issue is there when the SC is converted into PO after approval, not populated with default incoterms and terms

  • Acrobat form; how to set-up a drop down list that has catagories?

    Hi, We produce business directories. I am working on a display ad proof template where the user has a choice of 10 main categories where each main has 5 to 15 sub-categories. In my new Adobe Acrobat Pro 9 I understand how to create a drop down list,

  • 11.5.9 cloning

    Hi, I need to clone 11.5.9 system. The cloning doc, says to apply the Latest pathes ( AD.I.4 and 11i.ADX.F. ) Is it mandatoroy to apply these. Also any other tips would be great.

  • Copy statement in Oracle 8.1.6

    Hi all, I want to copy records from one database to another database. the following statement works in Oracle 9i where as not in Oracle 8.1 . SQL> copy from abc/xyz@a to def/qqq@b insert T1 using select * from T1 the erroe is ORA-00928 Missing SELECT

  • Mapping an attribute to different classes

    I have a class, A that contains an attribute called "state" of type State. Class State is an abstract class that contains 2 methods. Classes ActiveState and CompletedState extend State and none of them have attributes. They only implement the 2 metho