Clean Install - Installaion Guide

Hi All,
This is not a guide but rather a request for one. I have been a avid AMD supporter for quite some time but since the jump to AMD64 is a TAD expensive I'm going with the Intel option. Just as a sidenote other the the mobo and CPU all the other coss for a new PC are identical ...
But back to my questiion. Could someone post a guide on step by step installation of a brand new MSI Intel system ... I'm talking from initial bios upgrades & weird or unusual jumper settings (eg: the facft that you have to set up jumpers on the WD drives b4 they will work) .. through operating system installation and all the nitty gritty driver details .. like wheter to use the MSI drivers or download others ... basically I'm looking for the stuff that is not in the manual, since most initial installs consist of a lot of swearing and a complete redo. So maybe somebody would be nice enough to list the steps and all the pitfalls along the way.
And maybe the admins could make it a sticky if it's good enough ....
Well thanks a lot...
PS: Yes I do have a personal stake in this as I'm getting a brand new systems .. all components later this week and I'd like to know what to look out for in the installation.

Well Welcome to the "Light Side" , As Far as Jumpers go, well at least they are only on the HDD'S, and only on the P-ATA'S at that. as there are No FSB Jumpers on any of the P-4 Boards from MSI that I know of at Least, Except for the C-MOS J-BAT1 Jumper, but all Motherboards Have, Or Should Have a J-BAT Jumper, As far as the BIOS is Concerned, I realize that it can be very overwelming, but the All of the Members here in the P-4 Forum would be Glad to Help you out with any qusetions, as I am Sure of this , and as far as OCing or RAID Arrays, "Kevin Keenan", as well as "vango44", have Written about the Best Instructions I have yet to Come across, so once you get your Board and CPU and such, if you have any Questions at all. Do NOT hesitate on Asking, either by starting a Thread, or PMing Me or Any of the P-4 Moderators, as we have a Good Buch Here ...Good Luck, and Welcome qpllqp..............Sean REILLY875

Similar Messages

GUID Partition Scheme - Need clean install: can I restore files from TM?

So, here's my problem. I have an Intel PowerMac (first series after the G5) and when I try to install SL I get the following error message: "Can't Install Snow Leopard Since Disk Does Not Use GUID Partition Scheme". I guess it's something related to the fact thet I previously upgraded from an old iMac with a PPC processor (Apple partition vs. GUID partition).
Anyway, accoding to my understanding, the only solution for me is to do a clean install by wiping the HD and re-partitioning it.
Now, my question is: can I use my current TM backup to later restore apps/prefs onto the new SL system? I believe that TM now has an Apple partition scheme that reflects the one I have on Leopard 10.5. Is that right? Will I encounter any problem because of the different partition type of TM?

"Anyway, accoding to my understanding, the only solution for me is to do a clean install by wiping the HD and re-partitioning it."
Right, except that your drive will automatically be erased when you set up the GUID partitiion.
"Now, my question is: can I use my current TM backup to later restore apps/prefs onto the new SL system? I believe that TM now has an Apple partition scheme that reflects the one I have on Leopard 10.5. Is that right? Will I encounter any problem because of the different partition type of TM?"
Your TM backup should work. But, there are not many guarantees in life. You could tranfer you TM backup temporarily to your internal and then make a bootable clone of your internal on your external. Afterwards, you could transfer the TM backup back. Then, you'd have two sources from which you could restore items.
Message was edited by: donv (The Ghost)

Despite recent macbook with GUID, still needed re-format with clean install

Apple must have their hands full fielding thousands of calls from fathers with mac book endowed children who ran to the Apple store on the first day of availability, enduring the long pay lines and expense of Leopard only to find that the hope and expectation for a simple, hassle free upgrade was not to be.
They have or will eventually learn that afterone or more failed install attempts, the HD icon was flagged with an exclamation and that the only option was to reformat the hard disk. They will then freek out due to lack of backup for the HD contents including mail, itunes, imovie, documents, safari settings, etc., and will have to scramble to backup the data if they can.
If they are lucky and patient, they will be able to eventually speak to an Apple rep who will try to walk them through this frustrating and time consuming precess, but more likely the que will be full. The rep will check your HD and partition settings with you and state that they are not sure why you have to re-format as you already seem to be running the latest GUID format.
I hope that something can be done to alievate the pain of these poor unsuspecting parents!
It is too late for me!
Sufice it to say the a clean install did work.

It is obvious that a clean install on a blank disk will always work.
It is also obvious that not everyone will have a backup or clone before upgrading, trusting that Apple did their job well.
On anything but a plain vanilla box, it seems that the upgrade may not work or may not work properly.
I am sure that most of the installs are flawless and here we are seeing, as it should be, the words of those who need help.
We certainly do not need the gloaters, who by their nature are helpless.
We need good data as to what installs worked and what failed, and why and how to fix it so the next person does not have to suffer the same problems.
I have three boxes to upgrade this week. I may keep one or two at the Tiger level until the X11 stuff is straightened out.

Idiots guide to clean install upgrade to Snow leopard to get lion

Hi- am a total novice and have had my Imac 9,1 (2.93 Ghz Duo core processor with 4GB RAM) for a couple of years and now I am on MAC OS 10.5.8 Leopard and really want to get ready for Lion when it comes. My Imac has an external hard drive (250GB) and a time machine, airport for itunes for music streaming, some Microsoft office suite. I bought the Snow Leopard 10.6.3 yesterday and want to clean install without losing all my docs and settings for all iphones/ipods etc. Anyone got an idea where I can find an idiot proof guide to doing this? I guess I will need to do this all again once Lion is available
Help much appreciated...

first of all, make a backup of your boot drive by cloning it to an external HD using e.g. Carbon Copy Cloner.
then simply pop in the install DVD and click on continue. the SL installer will upgrade OS X and leave everything untouched (unless it's incompatible) - it's that simple.
in case something does go wrong, you have your clone.

I am trying to do a clean install MacBook Pro

I am trying to do a clean install on my Dad's older MackBook Pro. He downloads things he shouldn't and after frustrations trying to wipe ou trojans and bad files I just decided that the only way to make this thing work again is to clean install it. It was already running yosemite when I started.
I followed the directions at
www.osxdaily.com/2014/10/18/clean-install-os-x-yosemite/
I used a flash drive to install os x yosemite installer and made it bootable per the instructions on the site.
Everything seemed to work fine, I loaded the drive as the statup disk, I erased the partitions and the hard drive with disk utitilies using the installer flash drive.
However when I try to start to Install Os X it runs for about 10 minutes and then gets stuck at "one second left" I accessed the log errors and got this
Apr 19 21:01:40 MacBook-Pro.local InstallAssistant[415]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IASetupWindowController) to (PUKDiskPickerHorizontalView): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistProgress) outlet from (IASetupWindowController) to (NSProgressIndicator): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistView) outlet from (IASetupWindowController) to (NSView): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (subtitle) outlet from (IASetupWindowController) to (NSTextField): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IAContentView) to (PUKDiskPickerHorizontalView): missing setter or instance variable
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.708 InstallAssistant[415:17328] ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981cbde640 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.712 InstallAssistant[415:17328] ***cachedResponseForRequest:key:handler failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981ce92fe0 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
Apr 19 21:01:50 MacBook-Pro.local InstallAssistant[415]: GetDYLDEntryPointWithImage(/System/Library/PrivateFrameworks/CacheDelete.framew ork/CacheDelete,CacheDeleteCopyPurgeableSpaceWithInfo) failed.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Apr 19 21:03:44 MacBook-Pro.local Unknown[397]: 2015-04-19 21:03:44.052 InstallAssistant[415:17320] Layout still needs update after calling -[NSScrollView layout]. NSScrollView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it. Both are programming errors in Cocoa Autolayout. The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
I already have his pertinant files back up. I just need to install a new system on this empty hard drive. What did I do wrong?
Matt

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

I'm unable to do a clean install of Firefox 6 on Macbook Pro OSX 10.6.8.

I'm unable to do a clean install of Firefox 6 on Macbook Pro OSX 10.6.8. After trashing the firefox.app from the Applications folder and trashing a related file in the Library folder and then reinstalling, all of my previously opened windows and tabs reappear. And the history and bookmarks are populated too! Then, the computer freezes up so that I must reboot. Because these windows automatically open and the history and bookmarks are populated with my old history and bookmarks, I believe this is not a clean install. Please help.

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Clean Install of Mavericks on new SSD - Final Question

I am looking for some help installing a new SSD into my mid-2010 Macbook Pro. I have the 15 inch with i5 and 4GB of RAM. last week I upgraded to 8GB of RAM, purchased from Crucial, and am about to install a MX100 512GB SSD also purchased from Crucial. I have read about the issues with third party drives in Yosemite and because of this I will keep Mavericks until I learn more.
My goal has been to get the new SSD into the computer and treat it like a brand new computer completely clean. This I learned was considered a "Clean InstalI". I am not very good with computers and sometimes the discussions I've read on the internet can generalize things and not define each step like a complete novice like me would need. So I have done a lot of research and below have a step by step guide on how I intend to do a clean install of the operating system onto my new SSD. I am looking for validation that this is correct or any steps I need to adjust.
I had asked a question about 2 months ago that lead me into the direction of doing the clean install. Drew helped out quite a bit and got me started on researching what I need to do for this clean install. There were some comments I had a question with. His notes are in italics and my questions are in bold.
During install use Setup Assistant (it's basically the same as Migration Assistant).
Connect the old HD (Can I connect to my external HD that backed up my old HD via Time Machine?) & choose the option to migrate the User account (leave the applications & other data disabled). (what happens if I opt to not do this step, not migrating User account information, what would be the Pros / Cons... another basic question I guess would be what exactly is in these User Accounts... anything that if I did not migrate over would give me issues?)
When completed you will have the same user on the new disk.
The Applications are left on the old disk, it's better to reinstall them in my opinion.
now on to by guide I compiled...
My Step by Step guide that if confirmed on here I will move forward with! Very excited and hope I got this correct.
Create bootable MAC OS X Mavericks USB Flash Drive
App Store - Download OS X Mavericks from PurchasesDone
Now found in the Applications folder (leave right there)
Plug in USB Flash drive (minimum 8gb)
Go to UtilitiesLaunch Disc Utility
Find USB Flash Drive on left hand side
Format this drive
Click on Erase (tab towards top)
Format: Mac OS Etended (Journaled)
Name: “installMavericks”
Click Erase button at bottom
Launch Terminal
Copy and paste text below. replace the red “Untitled” with the name of the USB drive (installMavericks) - case sensitive and keep the space after installMavericks
click enter - put in password
will take approx 20-30 minutes
If message says Done I now have a USB drive with Mac OS X Mavericks right on itwhat happens if there is an issue?
Text to put in terminal
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Upgrade HD to SSD
I have backed up my current HD on an external 1TB drive via Time MachineI plan to do a Fresh/Clean install of the Mac OS Mavericks. I will individually bring over songs, pictures, movies, documents etc from the external HD that has the last x amount of my Time Machine Backups of current/soon to be old HD
Open Macbook Case
loosen two screws, pull the entire strip out. The screws do not come out, only loosen
Pull hard drive out with the clear strip of (paper?)
careful, still connected to SATA cable
once removed - use TORX screw driver to remove the 4 screws on the Hard drive and transfer them into the same spot on the SSD
connect SSD to the SATA connector
put the SSD back into its bay by lining up the 4 screws to the locations within the bay
add back the strip that had the two screws from earlier. tighten screws
put case back on.
Plug in USB into computer and turn on computer
Will boot to the Mac OS Utilities
go to “Disc Utility”Find SSD on the left
go to Erase Tab to repartition
Format: Mac OS Extended (Journaled)
Name: example “new SSD”
click erase at the bottom
Exit out of Disc Utility
go to “Reinstall OS X”Click continue
go through the screens and menus… (not sure what happens here) assuming this is loading the OS Mavericks from the USB to new SSD
after this step is the installation complete?
what will be on the new SSD?
iTunes, iPhoto, iMovie, Garage Band, QuickTime player etcwill these need to be re-downloaded from the App store etc
Logic Pro X, Toontracks, Fluenz etc.these I need to re-download from the sites using serial keys etc. (I have decided to just buy the new Logic Pro X so that I can do the clean install and leave my old Logic Express behind where I have lost the disc that came with it)
From here I can connect my external 1TB drive that had my previous HD backed up on it and pick and choose what songs, movies, pictures, documents etc that I want to drag onto my new SSD
DONE !! ??
Sorry for the long post. Wouldn't make sense not to reach out to this awesome community though. Thanks again for all the help. I realize I am responding to an old post so I may end up re-posting this as a new topic.
Daniel

DRH85 wrote:
...However the simplicity of using Time Machine to migrate over to the new SSD is very alluring. I have found a link that talks about the Pros and Cons. Do you think they summarize things very well?...
Your link makes very interesting reading. One thing that jumps out is how an old HD's installation and Time Machine are equated. Time Machine is a remarkable system, simple on the outside and complex under the hood (this is the fundamental resource on the subject, created by a Community member who is sorely missed). But it doesn't play well with certain types of files (virtual machine files for running Windows, etc., on a Mac for example) and has, in my experience at least, lost some files after briefly saving them. Your old HD, on the other hand, is both complete and current, making it a better source IMHO to migrate from.
The point about older software no longer being compatible is well taken, but I tend to keep older versions long after newer versions appear and I've been surprised at how well they continue to function after the publisher insists they're no longer supported by a newer OS (and are sometimes better than what replaces them). And in the case of commercial software, associated files are often sprinkled far and wide, perhaps to prevent easy pirating. Moreover, while keeping track of serial numbers is always a good idea, many publishers limit the number of installations and entering the S/N over again usually involves the program phoning home to check on the installation count so far. Cloning avoids that more effectively than migrating.

How to restore iTunes library from TimeMachine external hard drive backup after clean install

I was not able to solve this problem, hence I decided to open this discussion.
1. Recently, I clean installed Yosemite so my new Mac is completely empty.
2. I have my time machine backup on my eternal hard drive and would like to restore only specific things - such as iTunes library.
3. I did not manually copy iTunes library to my drive, I did the TM backup only, but I also do have all the files in my own "music" folder I manually backed-up.
However, I cannot locate the library there, where is it?
How do I move the library to my new Mac and then establish a new source folder that would be on my drive?
PS: Previously, iTunes used my own music folder as a source = it contained all the music files. I had it on an external drive, later moved it to my Mac.
This leads me to the conclusion that my backup copy of iTunes library did not contain the files anyway.
Any advice?
Thank you in advance.

I am confused as to what you had or have where and when. The bottom line is, your library (for the standard user) is everything in the iTunes folder. As far as iTunes' organization and display is concerned, your library is a file called "iTunes Library.itl" which points to all the other host of files and folders normally in the iTunes folder which all work together.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 and making an iTunes library portable.
If you kept everything together in one place then you need to put the whole iTunes folder on the drive where you want it, start iTunes while holding down the option key and guide it to that .itl file. If things were split up and you had media on the external and the rest of the library on the internal you need to get them back to exactly where they were before. If you can't find that iTunes folder holding the critical .itl file anywhere then you have a bunch of media tracks and no organization and will need to rebuild the organization from ground level.

SSD Cache Not Working U840 after Clean Install Intel Smart Response Technology

Hello, I completed a clean install of Windows 8 on my ultrabook model U840 (Core i3, 16GB SSD). I would appreciate any advice to get the SSD to use the Intel Smart Response Technology (SRT) for SSD Cache.
I used the Intel Rapid Storage Technology (RST) driver during install and after installing Windows 8 but I do not recieve the option to Accelerate the SSD drive. I followed the instructions and links contained in this Toshiba Forum post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=277914
The computer is supported for Windows 8 upgrade and clean install drivers are available at Toshiba: http://support.toshiba-tie.co.jp/windows8/drivers_cae.htm
The BIOS is set to default for the drives (Performance). Any advice is appreciated. Thanks.
- Red
Solved!
Go to Solution.

If anyone stumbles upon this problem in 2015, i have detailed my solution here
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=81644&tstart=0
I used a somewhat abbreviated version of this guide myslef, and did have some trial and errors
http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide.pdf
I urge you to at least read my post in the other Toshiba forum for a fuller grasp and overview, but I have also attached the two Intel website and PDF links for you.
Keep in mind that there are seemingly two types or Intel Rapid Cache type options. Follow the instructions in the intel link and one of them will work for you. (I hope it does work for you because i know how frustrating this issue is)
Cheers and Best of luck
Shane
Attachments:
download.intel.com_support_motherboards_desktop_sb_rapid_start_technology_user_guide.pdf ‏349 KB
Chipset Software — Intel® Smart Response Technology User Guide.pdf ‏506 KB
Windows 8 Upgrade_ Items that may result in a loss_limitation of features_functionality after upgrading to Windows 8.pdf ‏191 KB
download.intel.com_support_motherboards_desktop_sb_rapid_start_technology_user_guide.pdf ‏349 KB

Windows 7 Clean Install on SSD

I have an X60 Tablet and a W700ds both with Lenovo OEM Samsung SSDs installed. I'd like to install WIndows 7 64 on the W700 and WIndows 7 32 on the X60 Tablet. I have read a bit about SSDs needing to be formatted and the OS needing to be installed a certain way to avoid problems later. Is there a guide or can you write a reply with the steps needed to clean install on both of these machines. I'd also like to get as much of the EE I can on the X60, but definitely want to get the entire EE with the W700 I paid so dearly for. The WIndows 7 64 Ultimate disc is coming from Lenovo so perhaps it's already optimized for EE?
Please direct me to a guide, or post one here. My capabilities as a computer user are high for someone that is NOT in a computer industry so I am not afraid to do things that may be considered risky for someone computer illiterate.
Since I only have Vista on the hidden R&R partition, I plan to eliminate that and just use Acronis since I already own it. Too bad I can't get restore discs with the Windows 7 preload for both machines.

Hi, I'm afraid I can't give a guide. However, I did this upgrade on a T400s with an SSD, and it did not go smooth for me. What happened was I chose the custom option but did not format the drive. After a while it failed giving me a message it could not find all required files. Then I started again, the SSD was then full and the wizard told me I had to format. I did and it installed a generic Win7 with no Thinkpad drivers. I then pulled the Thinkvantage Toolbox from the 2nd CD and eventually I managed to most of the drivers through that program. Some were still missing (notably the Express Card and the Ericsson Mobile Broadband adapter which I got manually when I finally understood which ones were missing). I'd recommend downloading as many drivers as possible from the website in advance. Good luck!
Cheers, Thorbjorn
T400s | 2808-CYG | SSD | 4GB RAM | Windows7 Prof. 32bit

X100E clean install of Windows 7

I got an X100E nearly a year ago and have never been happy with all the extra 'junk' software that came pre-installed with it. Sure there are a few useful items, but like many business users, I'd much prefer a clean installation of Windows so I could install the programs I've found from experience work well.
I've currently got a problem that's going to require reinstalling from the CD that Lenovo's sending me and this would be an ideal time to get the clean install I need. The problem is, this will be an image for the entire drive that will leave the machine in the state in which it shipped originally including all the unwanted bloatware.
It's not really feasible to uninstall all the unwanted stuff - I tried this several times soon after getting the machine and had serious problems. Not all of the stuff is uninstallable and even the items that do uninstall don't do so properly. After resetting to factory two or three times I gave up.
How can I get the clean installation I'm looking for? I can see from the support pages that this isn't an unusual requirement and all of the extras are available for download and installation if needed so where can I find details of how to do a clean install?
Solved!
Go to Solution.

Thanks again for your time and patience with this issue.
Even though it looks like it's much more involved using ABR, most of the procedure is just good practice even if you're not using ABR (backup etc.). Anyway, I thought I'd give it a try last night as I'm sure going to use this again so best to get familiar.
Actually, I did download the W7 Beta file, what I meant was that the instructions are for Vista - same with the guides for Lenovo. Also they are several years old. This shouldn't be a problem, though as it's mostly just stepping through the installation procedure. However, the X100e doesn't have an optical drive and I'm not sure how to get 'round this (share a drive on another PC or make a bootable USB drive and force the X100e to boot from it?). Anyway, I thought I'd go through the preparation steps, but then I had a number of problems:
1. First I went to the Lenovo site to manually download the drivers as listed in the procedure, but couldn't find the chipset drivers for the mobo. Not a disaster as I have a backup of the latest drivers from running Driver Genius backup (also all the old ones replaced by it), but I'd still like to know where to find it on the Lenovo site. There's also mention of a 'Turbo Memory Driver' and a 'Matrix Storage Manager Driver', but since I could see no drivers of this type listed, I assume it's not relevant to this machine.
2. I then tried to delete the hidden partition following the steps in Hypertrophy's Diskpart Guide, but at the final step "delete partition override" I got a message saying the action couldn't be performed. The guide assumes this will work and gives no further details of what to do if it doesn't. I was logged on to the proper Windows 'administrator' account and also tried running it '..as administrator', but just got the same result. There's also a message at the start of this article saying "Make sure you have backed up your OEM keycode before deleting the hidden partition." What's the OEM keycode? Surely not the activation key as the guides say to delete the hidden partition BEFORE running the ABR utility. Does it just mean to write it down first or is the OEM keycode something else?
3. Lastly I tried to run the ABR utility itself (downloaded the ABRbeta.exe) file, but when I ran this I got this message "Can not open file 'L:\Downloads\ABR Beta\ABRbeta.exe' as archive". At this point I gave up, but tried again this morning on a different machine and got the same result. However, downloading it again today it works fine so at least that's one problem solved!
All I need now is a way to delete the hidden partition (formatting the whole drive is fine as there's nothing of value that hasn't been backed up) and a method of installing Windows, either from DVD, bootable USB drive or from a mounted image across the LAN.
You've already been very helpful and I can't thank you enough, but if you could give me some help with these problems and the earlier questions regarding drivers, I might have a chance of getting this job done.

Booklet: clean install Windows 7 Starter on Kingst...

I bought a Kingston SSDNow V+180 SVP180S2/64G 64GB to replace the original HDD.
I had a lot of trouble cloning the drive (or actual the restore operation). Both restoring the Windows partition and the System partition failed.
I decide to start from scratch and just execute a clean install of Windows 7 Starter.
The advantage of this way is you only need a 4 Gb USB Flash Drive and no other hardware (besides the new 1.8 SSD...) This guide is also very useful when the original HDD is broken (and no system restore is available).
Ingredients (where to obtain is explained below):
- 1.8" SSD
- USB Flash Drive (minimum) 4Gb
- Windows 7 key of Booklet
- Windows 7 ISO file (x86 version)
- Windows 7 USB DVD Download Tool
- Nokia Booklet Drivers
The Windows 7 key of the booklet can be found behind the battery. Just remove the battery pack and there is the original Microsoft Windows 7 product key.
As the Nokia Booklet doesn't have a DVD-ROM and it's not supplied with the Windows 7 DVD, you can download the Windows 7 ISO file from here (make sure it’s the x86 version):
http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65804/X15-65804.iso
I got this information from here: http://mrintech.com/download-iso-file-create-dvd-activate-windows-7-x86-and-x64-with-genuine-product...
I also executed the "Remove Edition Configuration (EI.cfg) File from Windows 7 ISO", but wait until proceeding; I will come back to that...
Also download the Windows 7 USB DVD Download Tool from here:
http://images2.store.microsoft.com/prod/clustera/framework/w7udt/1.0/en-us/Windows7-USB-DVD-tool.exe (When the link is broken, just use Google).
Please note: nothing illegal is going on downloading this software!
Install and execute the Windows 7 USB DVD Download Tool.
When asked, select the ISO as source and the USB Flash Drive as target.
The tool formats the USB Flash Drive and the files are copied to it as well.
(I executed this on a Windows 7 machine, but I don't expect differences when executed on a XP machine).
When the tool is ready do the following.
Search on the USB Flash Drive for the file "ei.cfg"
I used the tool to remove this file from the ISO, but it was back on the Flash Drive .
You will have to remove it otherwise Windows 7 Home is installed (result: you can't use the original Booklet key).
How to replace the HDD for the SSD can be found over here:
http://pc-level.com/2011/07/how-to-disassemble-nokia-booklet-3g/
Plug the USB Flash Drive into the Nokia Booklet and power the Booklet up.
Hit the F12 button and select the USB Flash Drive to boot from.
When asked, select Windows 7 Starter to install.
The installation takes a while, but in the end you will see the Windows 7 desktop and are almost ready.
It's very important to disable TRIM and you will see a an excellent performance increase when you execute the following:
Open the command prompt (for example):
Start -> All Programs -> Accessories -> Command Prompt
type:
fsutil behavior set disabledeletenotify 1
To check whether TRIM is disabled execute:
fsutil behavior query disabledeletenotify
The result should be: 1
Reboot the booklet, just to be sure.
Install the drivers from Nokia: http://europe.nokia.com/support/product-support/booklet-3g/software
Execute a Windows Update.
The Windows Experience Index shows me 5.9 with the SSD.

Don't worry Reserter, your English is ok
Concerning your problem two things come to mind:
- did you disable TRIM? It's very important to disable this option because the chipset can't handle TRIM. After I disabled TRIM a serious improvement was noticeable.
- the reason of the clean install initially was because I wanted a SSD (solid state drive) instead of a HDD (hard disk drive). The factory installed HDD is slow and a SSD drive improves performance of the Nokia Booklet dramatically.
I would consider to buy a 1.8" SSD... The booklet starts up in an acceptable time and is really useful as a netbook now. (buy an enclosure for the original HDD and you have external storage as well).

Windows 7 Clean Install on T500 with Vista

So my thinkpad t500 was infected (the entire recover area was also infected). It came with Vista and I just got the recovery media CDs for Vista. But I don't want to install Vista. I have a legitimate copy of Windows 7 that I purchased and completely formatted the entire laptop (all the partitions including the recovery media partitions which were infected). IBM does not sell Win 7 recovery media (if your laptop came with vista installed) unfortunately.
Now I have win 7 working but I have no internet connection.
I tried to install Thinkvantage 5.02 so that thinkvantage can automatically download the drivers (but the internet connection is not working so that is not going anywhere).
I had downloaded a couple of drivers from lenovo's website. I installed one of them called 7vr722ww.exe. It did not work (no internet connection). When I go to device manager the network adapters say they are upto date.
Any help with downloading and fixing the OS would be great. A step by step approach would be better. I saw some tutorials online but they are not very useful but I could have missed something here.
I tried this tutorial : http://forum.notebookreview.com/lenovo/642274-patchysans-guide-clean-installing-windows-7-thinkpad.h...
and could not go beyond step 8 (updating drivers does not work). I also don't have anything beyond the recovery discs for vista (not windows 7). I looked for any executables in the two recovery cds for vista but found none.
Thanks for any help that anyone may be able to offer.

Ok I am using 32 bit system (or I think I was but I accidentally installed using the 64 bit dvd! I am going to do another clean install to fix this tomorrow)
This time around (on my second/third attempt at clean re install) I kept the wifi radio signal on and win 7 installation asked me for a password and I entered it at it worked! (had some issues because I was trying to simultaneously connect via ethernet but once I unplugged the ethernet cable I am now online using my clean installed machine).
I am now downloading thinkvantage system update and it is downloading a lot of recommended and other drivers.
In my third time around clean install I deleted the 2 partitions that my thinkpad came with and combined all into one partition and formatted it (so as to avoid the virus from re emerging , unless the virus in the bios in which case I don't know what I can do).
Win 7 created its own 100 MB partition and lets hope that thinkvantage does the right thing and creates the recovery media and cds which I may then use to create my own recovery CDs for this computer.
I see that system update has ended the downloads and installs but I dont see any system recovery options. How do I get the recovery and rescue software on this ?
There is something strange that win 7 (and vista on t500 ) does: the computer freezes upon startup and I have to ctrl+alt+del and then click on task manager to unfreeze it. Is this happening with other people?
I must say that buying lenovo's thinkpad is like the most awful experience ever. I have a 2004 thinkpad from IBM and it still works just fine (with xp) and works better than my brand new 2009 T500! ... the T500 by lenovo is just awful. Months after buying it the right button of the mouse on the laptop stopped working. I use an external mouse now because I did not have the time to send and mail the entire laptop (I had to make do and now the warranty has expired and they wont even renew it!). When I try to type on the keyboard I accidentally triger the laptop's half functioning mouse ! it is just an awful experience altogether with the shoddy workmanship and garish clunkiness of design.

Lion Clean Install - No Disc Required - Recovery Partition Solution

There is a way to run a Lion clean install without unpacking the installation onto a new disc or thumb drive. It can be accomplished via a slightly longer, two-step upgrade process, which requires wiping your hard drive after you've upgraded to Lion. You must be able to connect to the internet for this option to work, as it will require downloading the install package again.
As always, be sure to back up your data before performing any sort of wipe of your hard drive.
STEP 1 - Initial Upgrade
Perform a normal Lion upgrade through the App Store. This will install Lion on top of your current configuration. It will also create a Recovery Partition, which is a new feature of the Lion OS. It is this Recovery Partition that you will use to perform the clean install.
STEP 2 - Wipe and Clean Install
Restart your computer into Recovery mode. This can be done by either holding down CMD-r during boot up, or holding down the Option key during bootup and selecting to boot from the Recovery partition.
Select the Disk Utility option from the main menu. Here you can select the main partition, click on the Erase tab at the top, and completely erase the partition. Once you've done this, quit Disk Utility Option, and you will return to the main menu.
Select the Lion Installation option. It will ask you to connect to the internet if you have not done so already (if wireless, you can do this via the Wi-Fi icon in the top right corner). It will also ask you to input your Apple ID login and password in order to verify that you've already purchased the software. The installation will take as long as it requires to download the package again. Once downloaded and installed, Lion will walk you through initial set up.
This solution worked for me, but I make no guarantees that it will work for others.

I've created a boot disk (several actually) following the methods outlined in this guide.
http://www.eggfreckles.net/tech/burning-a-lion-boot-disc/
I've also saved the installer dmg in several backup locations so it can be burned again fresh or transfered to bootable USB thumb drives.
The Lion install disk boots up and operates just like the Recovery Partition (Disk Utiltiy and all) with one giant benefit, you don't have to log into the MacAppStore with all it's complications or require a lenghtly internet download to install Lion.
So you won't see this annoying screen and have to wait a few hours if the servers are overloaded.
The boot disk also installs considerably faster. Two giant benefits actually.
Also once Lion is installed, Bootcamp can be used to partition the drive, then the Recovery Partiton > Disk Utiltiy used to change the BOOTCAMP partition to HFS+ journaled and then 10.6 can be installed or cloned from a external drive onto the BOOTCAMP partition.
Dual boot Snow/Lion is possible with a large enough boot drive.

Help Lenovo Y50-70 Win 8.1 clean install

I'm new to Lenovo, Win 8 and to this forum. I'm considering buying Lenovo Y50-70 Notebook model 59441814 - Intel Core i7 4270HQ, 8GB DDR3L, 256GB SSD, NVIDIA GTX 860M 4GB, 15.6" Touchscreen, 4K UHD, USB 3.0, no DVD drive and Win 8.1 pre-installed. I also have retail MS Win 8.1 Pro "Full Version" 64 bit DVD and key. Would like to upon receipt of latptop to: (1) replace 256GB SSD with a Crucial MX200 500GB SATA 6Gb/s 2.5" SSD, and (2) do a complete clean install using my retail 8.1. Reasons are: increased capacity and get rid of all the unnecessary stuff that Lenovo pre-installs. Since I don't have a DVD drive and I have read there are some issues with boot secure, can someone provide recommendation on sequence of steps to follow. and /or how to.
Solved!
Go to Solution.

hi Forest1,
Welcome to the Forums.
When you receive the Y50-70, can you try these steps:
1. Follow this video disassembly guide on how to replace the HDD with an SSD. Alternatively, you can also watch this youtube video on how to replace the drive.
2. If you're planning to install Windows 8.1 Pro in UEFI mode, follow this guide on how to convert the DVD installer into a USB installer. When finished, boot into the BIOS and set the following settings then hit F10 to save and exit.
- Link to picture
Secure Boot = Disabled
USB Boot = Enabled
OS Optimized Defaults = Other OS
When finished, boot from the USB flashdrive that you created (by tapping F12 and selecting the flashdrive on the boot manager) and you should be able to install Windows 8.1 Pro on the SSD.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Clean Install - Installaion Guide

Similar Messages

Maybe you are looking for