Clean install macbook pro retina 13"

I have just done what I thought was a clean install but the previous owner of the computer is still listed as a user. I need instructions for a clean install to set the computer up as mine. Any help would be appreciated.

OS X Mavericks: Erase and reinstall OS X - Apple Support

Similar Messages

Opening and cleaning a Macbook Pro (retina 2012)

I have had my MacBook Pro retina for more than 2 years, without cleaning the insides yet
I have used it extensively, many hours every day, and there has been periods of daily smoking
Should I just order a screwdriver set (pentalobe?), open it and clean the fans etc.?
I assume warranty is already expired.
But will opening and cleaning it be complicated or risky business? I'm good with electronics, but Apple uses small and delicate screws/parts etc.
Should I use a swab, compressed air container, or will a vacuum cleaner do? (metal/plastic head; static electricity)

Mow.gli wrote:
Should I just order a screwdriver set (pentalobe?), open it and clean the fans etc.?
I would. I open up my MBPs without fear. I suggest that you place it on a large surface with a clean towel underneath. That way you can slide it around without damage and when you drop a screw, it will tend NOT to bounce away.
I assume warranty is already expired.
Yes, unless you purchased Apple care which extends it to three years.
But will opening and cleaning it be complicated or risky business? I'm good with electronics, but Apple uses small and delicate screws/parts etc.
Should I use a swab, compressed air container, or will a vacuum cleaner do? (metal/plastic head; static electricity)
I do not consider it risky if you use patience and a little common sense. You may also need a #00 Phillips driver and possibly a Torx driver. Check the iFixit.com web site for disassembly instructions for you model and appropriate tools. That way you will have an idea what to expect. Swabs with a non-residue electronics cleaner and compressed air are good ideas. A vacuum cleaner should be used very judiciously.
Ciao.

I am trying to do a clean install MacBook Pro

I am trying to do a clean install on my Dad's older MackBook Pro. He downloads things he shouldn't and after frustrations trying to wipe ou trojans and bad files I just decided that the only way to make this thing work again is to clean install it. It was already running yosemite when I started.
I followed the directions at
www.osxdaily.com/2014/10/18/clean-install-os-x-yosemite/
I used a flash drive to install os x yosemite installer and made it bootable per the instructions on the site.
Everything seemed to work fine, I loaded the drive as the statup disk, I erased the partitions and the hard drive with disk utitilies using the installer flash drive.
However when I try to start to Install Os X it runs for about 10 minutes and then gets stuck at "one second left" I accessed the log errors and got this
Apr 19 21:01:40 MacBook-Pro.local InstallAssistant[415]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IASetupWindowController) to (PUKDiskPickerHorizontalView): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistProgress) outlet from (IASetupWindowController) to (NSProgressIndicator): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.054 InstallAssistant[415:17320] Failed to connect (loadingDistView) outlet from (IASetupWindowController) to (NSView): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (subtitle) outlet from (IASetupWindowController) to (NSTextField): missing setter or instance variable
Apr 19 21:01:41 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:41.055 InstallAssistant[415:17320] Failed to connect (keyReceivingView) outlet from (IAContentView) to (PUKDiskPickerHorizontalView): missing setter or instance variable
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.708 InstallAssistant[415:17328] ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981cbde640 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: 2015-04-19 21:01:49.712 InstallAssistant[415:17328] ***cachedResponseForRequest:key:handler failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f981ce92fe0 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Apr 19 21:01:49 MacBook-Pro.local Unknown[397]: }
Apr 19 21:01:50 MacBook-Pro.local InstallAssistant[415]: GetDYLDEntryPointWithImage(/System/Library/PrivateFrameworks/CacheDelete.framew ork/CacheDelete,CacheDeleteCopyPurgeableSpaceWithInfo) failed.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
Apr 19 21:01:50 MacBook-Pro.local Unknown[397]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Apr 19 21:03:44 MacBook-Pro.local Unknown[397]: 2015-04-19 21:03:44.052 InstallAssistant[415:17320] Layout still needs update after calling -[NSScrollView layout]. NSScrollView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it. Both are programming errors in Cocoa Autolayout. The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
I already have his pertinant files back up. I just need to install a new system on this empty hard drive. What did I do wrong?
Matt

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Cleaning heat sink on Macbook Pro Retina after liquid spill... HELP!

Hello all...
My wonderful boyfriend spilled about 3-4 tablespoons of orange juice on my Macbook Pro Retina (15in) on Thursday. Right over the left speaker and onto the ESC, ~, brightness up and down, 1, 2, 3, TAB, Q, W, Caps Lock, and A key. It also dripped down and got into the vent. I immediately (like within 1 second) grabbed it and turned it upside down, and wiped it up while holding it upside down. I then turned it off and held it upside down for some time, and let it sit open and off after that. I turned it back on the next day and had no apparent issues. (However today some of the keys have been "crunchy", so I think I better clean them...)
I couldn't get it to the Apple store until yesterday because of Hurricane Sandy and not having power or anything. I had the genius check it out. He could only take off the back without having to charge me anything and he said that none of the liquid sensors were tripped in the back of the computer but that there was some dried up orange juice in the heat sink (but apparently not really anywhere else which he said makes me the luckiest person in the world). He took a photo on his phone and showed me... just some residue and orange juice that looked "dried up" in like 5 or 6 of the vents. He said that I could try to clean it myslf with alchohol wipes and a toothpick at my own risk. But I am very nervous as I am not exactly tech savvy... I watched videos on how to take the back off, but the part about disconnecting the battery and all gets me nervous. My question is, do I have to disconnect the battery to just gently clean up the heat sink with a little toothpick and alchohol wipes? Do I have to ground myself? What do I do?
Also, how necessary do you think it is to even clean it up? Could the heat sink need to be replaced in the future from this? Is it really a big deal? I'm looking for honest answers, since I felt like the genuis guy had too much liabality to say anything to me about anything.
Unrelated, what are the chances that liquid got through the keyboard to anything more sensitive to liquid? The genius couldnt really give me an answer. I have noticed just as I am typing now that sometimes it seems that the cursor of where I am typing will just jump back to the end of the previous line when I hit the Caps Lock key... it's very strange and I'm getting agita just thinking about it. Could that be a problem with just my keys getting stuck somewhere or a bigger problem with hardware being damaged... help and THANK YOU!

When i start any game the CPU goes up to 90° in 2 minutes and the computer shutdown after at least 5 min.
I found a solution. after a lot of research i checked that my fans are working on the minimum means at 2000 rpm even when the games are on. so i install it a software called smcFancontrol that u can control ur fan speed and i make it up to 4000 pm (you can do it with iStat menu too) and i tested my computer. I Have been playing on my macbook pro since this morning and there is no problem of overheat or shutdown.
Is it normal that we need to change the fan configuration or control to play a game that was working fine before.?
for cooling my machine i have a mStand Rain design http://www.raindesigninc.com/pic_high%20res/mstand_macbookpro_keyboard_perspecti ve_unibody.jpg

MacBook Pro Retina Late 2013 UI Lag after installing Yosemite

Hey everyone,
Ok so my Issue here, and I think I'm not the only one but my MacBook pro retina late 2013 (8GB ram, 256gb SSD) has been experiencing numerous issues after installing Yosemite. For example, the UI lag is at times horrible; after opening several apps, and especially after having a pdf or two open in preview everything becomes so sluggish. the animation of switching to mission control is painstakingly slow, and opening new tabs in safari takes 2 or 3 seconds. I've done a clean install of yosemite but nothing seems to help, what should I do; just revert back to mavericks and cross my finger for a future update?
Any help would be much appreciated, thanks so much !

i am in the same situation as you, late 2013 retina MacBook Pro 15 inch upgraded to yosemite and then clean installed yosemite b/c of UI lag after opening several apps at once... I found that yosemite drained my battery life too, on mavericks i was getting 5-8 hrs of battery life, on yosemite i was getting like 2-3 hrs most.
After exhausting every option out there (apple store genius bar help, apple repair, etc), I came to the consensus that my macbook had no hardware problems at all, it's basically a software problem on apple's end. and until they update yosemite with a specific fix for the UI lag and the battery consumption problems, i am not going back to yosmemite.
what i did was clean installed back to mavericks... this solved every one of my problems, NO LAG, NO BATTERY ISSUES, back to buttery smooth performance, of course without the new UI however... but i can live without new design
this experience tells me several things: 1. the new apple under the leadership of cook is slowly but surely sacrificing quality of software for unnecessary updates(sales) 2. mac hardware is still good but who knows for how much longer

In my macbook pro retina 15 inch there is installed mavericks but ı want to create recovery disk and ı need to download mavericks from App Store but it doesn't download??

Hey guys ı really need your help. I bought macbook pro retina 15 inch 2 weeks ago and it came with installed mavericks of course but ı want to create a recovery disk and to do that ı need to download mavericks installer from app store but when i click to download mavericks from appstore purchased part ı get a message says " Your purchasing process couldnt complete. OS X Mavericks cant be installed to this computer." How can ı solve this problem!??

One way around tis is to borrow a Mac that can run Mavericks and then the download will work. You can use these instructions:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Though they are for Mt. Lion, the same steps will work.
Ciao.

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

Go to: Apple > Force Quit
and select Mail > Force Ouit.

There is already installed mavericks on my macbook pro retina 15 inch but ı want to create recovery disk

Hey guys ı really need your help. I bought macbook pro retina 15 inch 2 weeks ago and it came with installed mavericks of course but ı want to create a recovery disk and to do that ı need to download mavericks installer from app store but when i click to download mavericks from appstore purchased part ı get a message says " Your purchasing process couldn't complete. OS X Mavericks cant be installed to this computer." How can ı solve this problem!??

One way around tis is to borrow a Mac that can run Mavericks and then the download will work. You can use these instructions:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Though they are for Mt. Lion, the same steps will work.
Ciao.

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Trouble installing Windows 8.1 on MacBook Pro Retina mid 2014

Hi everyone
I recently bought a MacBook Pro Retina (mid 2014, 15", 2.8GHz, 1TB SSD) and wanted to install Windows 8.1 on it via bootcamp.
I have an official .ISO package of Windows 8.1 (it's x64, I checked), got it from MS Dreamspark as a student, and a valid serial number for it, of course.
Burned the image on a 16gb flash drive via bootcamp and proceeded to install. When asked by windows installer which partition to install on, selected bootcamp and clicked 'format', as it was recommended to do in various instructions on the internet (as it wouldn't install without formatting, I tried). The installation went good and finished, but immedeatly after that the installer gave me a notification "Impossible to update computer loading configuration, installation cancelled" (maybe it's not exactly like that, translated as accurately as I could, I'm installing windows in Russian).
I tried it twice, each time re-burning the installation drive. Got the same error each time.
All the software (OS X, bootcamp, etc.) is up to date, the macbook shouldn't have any problems as it was bought just a few days ago.
How can I solve this problem?

yes sorry if it ruin the ending of one of the youtube clips you will be witching if you have problems as how you install windows in bootcamp
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=install+windows+8.1+on+macbook+pro+retina&tbm=vid

Crash report when i sign out from app store after finish install mountain lion on my macbook pro retina. please fix this

Hi, I already finish download osx maountain lion after 2 attempts for my macbook pro retina. and when I want to sign out from my account at app store, it crash and some crash report show up. and if I sign in it happen also, but the app store still can be run after got the crash report, and I already sent the report to apple. do anyone got this problems ? and for apple : please fix this problems !

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Error while trying to install safari extensions on Macbook Pro Retina

Dear All,
Yesterday I had to re-install Mountain Lion OS on MacBook Pro Retina. Everything went smoothly however after the installation process and updating sytem to the newest possible version, I am not able to install any Safari extensions. I was trying to find any information in the internet about this but so far I am unsuccessful in solving this issue. I am currently running Mountain Lion 10.8.2 and Safari 6.0.1. I would be grateful for any help.
Best Regards,
Jan

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

HT3986 I got a macbook pro Retina and I installed a windows 7. The problem is I can't find drivers for the Macbook pro retina hardware which work for windows 7

I got a macbook pro retina and I installed windows 7. How can I get the windows 7 drivers for the Macbook Pro Retina?

Read the Boot Camp Instructions, you have to download the drivers using Boot Camp Assistant
If you missed that I suggest that you read the instructions again.

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

If all else fails, try this. i used to do it all the time before. might or might not work with the new office.
if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
insert the thumb drive in your MB and do the install from there.
However, if you have the newer version of MS Office, Bandit's suggestion is much better.

MacBook Pro Retina SMC Update 1.1 Won't Install

Hi Everybody. I am having a really annoying problem with my rMBP. I have the update labaled: "MacBook Pro Retina SMC Update 1.1" Available in my Mac AppStore app. After I click update, I get a prompt letting me know that the laptop needs to be plugged in, I hit ok. It downloads (very small file) and asks me to Restart or hit "Not Now". I click restart, the system reboots into a updating page where a status bar quickly completes. The laptop restarts again back to OSX. I open up the appstore and goto the updates page and what do I see? 1 available update: MacBook Pro Retina SMC Update 1.1, like I never did anything to begin with.
My system info is:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro10,1
Processor Name:          Intel Core i7
Processor Speed:          2.6 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          8 GB
Boot ROM Version:          MBP101.00EE.B02
SMC Version (system):          2.3f32
Serial Number (system):          xxx
Hardware UUID: xxx
Please help this is really annoying.

I had the same problem. Tried all the proposed fixes. Nothing worked. This solved my problem:
1. Install a fresh copy of mountain lion on an extern disk
2. Startup from that disk
3. Update to 10.8.3.
4. Restart
5. Open app store, go to updates. You should see the SMC 1.1. update.
6. Click update
7. Restart
Once the update installed (fan will go quickly to max speed during startup) switch back to your internal disk and start up. Now the SMC 1.1. update shouldn't show up in the app store/upadtes.

Clean install macbook pro retina 13"

Similar Messages

Maybe you are looking for