Clean install of Leopard on a G5 tower what should "not" be plugged in?

What should "not" be plugged into my G5 tower when installing Leopard or is that not an issue to be concerned about. I have several USB and Firewire devices hooked up to my computer.
Thank you Ron

Terence Devlin wrote:
Ron
I suggest that you unplug everything except the keyboard and mouse.
Terence, this IS the BEST suggestion I've HAVE EVER found around HERE and I even DO THIS with EVERY Mac OS X Update.
Ron, I've Installed/Reinstalled Leopard countless times on both my PPC and Mac Pro so I know that Installing Leopard can turn into a NIGHTMARE. Contact me if you need more information.

Similar Messages

  • Clean installed Snow Leopard, but Lion Time Machine backup was not recognized.

    I erased the Macintosh HD and clean installed the Snow Leopard. But when I try to use the Time machine backup to recovery my documents, the external hard disk can not even be recognized. It says "To use this disk, connect it to a Mac with Mac OS X v10.7 or later. The format of the disk was created using Lion which can not be read by Snow Leopard." The fact is that the format of the disk is Mac OS Extended (journaled) and was indeed created by Lion from windows format. So how can I read the disk using Snow Leopard? Thanks.

    I it a general problem, affecting e.g. a Mac with multiple partitions.  I get the same with trying to mount 10.7 from 10.6.8.
    Not ideal.  Hope a fix will be found. I'd suggest to report this to Apple.

  • How do I import my address book after doing a clean install of Leopard?

    I just finished doing a clean install of Leopard and I realized that I forgot to export an Address book archive before erasing my hard drive. I still have all the Address Book files stored in Application Support in my Library (on my backup hard drive) but I don't know how to get those files into Address Book. Whenever I try the different import options they are all grayed out.
    I also have the Address Book files stored on my iPod Touch but syncing with my Touch doesn't seem to bring them into my computer. Is there anything I can do at this point besides entering them in one at a time?! Copying and pasting the files from the backup to the current folder doesn't seem to do any good either. It will tell me that the files I am trying to write over and in use. It says this even after I close Address Book.

    Ok, I got is to work by selecting the folder itself and copying it over. Aparently it does work if you open the folder, select all the contents and then paste it. I didn't think it would matter which way you did it.

  • Clean install from Leopard to M. Lion on new disk

    I have a late 2007 MacBook Pro with 10.5.8 and a too small disk. I just purchased a 500GB internal disk. I'd like to do a clean install from Leopard to Mountain Lion using the new disk. What is the recommended procedure? I'd like to avoid the extra step of installing Snow Leopard first as documented.

    Well, I wouldn't do it that way, too many steps.
    I would:
    1. Clone your current drive to the external drive, instead of using Time Machine. (Carbon Copy Cloner or SuperDuper)
    2. Boot from your external drive, update it to Snow Leopard.
    3. Purchase and download ML from that external boot. Save a copy of the installer to a location other than the Applications folder, that way it won't be erased after you use it. (verify that you've made a copy and not just an alias)
    4. Install your new drive, format it.
    5. Boot from your external, run the ML installer, select your new empty internal as the install destination, when prompted, use Setup Assistant to migrate your data from the external to the internal.
    6. When done, you should have a fresh install of ML on your new internal and a bootable SL on your external as a backup. If you decide that you want to go back to SL, you can just erase the internal and clone the external back to the internal.
    Note: You don't need to make a bootable USB installer, they're too slow anyway. Just keep a copy of the ML installer on your external, bootable drive, so that you won't have to download it again.
    Another option: Since you're replacing the intrenal with a 500 Gig drive, you could partition it to two 250 Gig partitions. Put ML on one and SL on the other, i.e.,

  • Restoring files ONLY from Time Machine on a clean install of Leopard

    Hi folks. I've seen variations of this asked but not quite the answer I'm looking for.
    I want to do a clean install of Leopard and want to restore only files from a TM backup (mp3's, photos, docs, etc.). I don't want to incorporate apps, system files or the user account from the TM backup. Just a fresh installation of OS X on which I can incorporate my files from a TM backup without having to worry about incorporating unwanted programs, hidden files and whatnot. I used to do this on Windows all the time but can't figure out a way of doing it on OS X. Thanks in advance for your suggestions!
    Jim

    j_kanaris wrote:
    What's user ID 501? So if I'm trying to import files from a TM backup and I have the same user ID, I won't be prompted to change it based on this method?
    you won't be prompted to change user ID but if the user IDs are different you'll be denied access to some folders (like the Documents folder) in your old home directory and won't be able to restore them. I presume the files you want to restore are there? this issue can be dealt with if it does arise but as I said if you only have one user on both computers this will not be an issue. just try it and see what happens.
    Message was edited by: V.K.
    Message was edited by: V.K.

  • Clean Install of Leopard - How to import old mail?

    So I did a clean install of Leopard as per recommendation from a guy at the genius bar. I backed up my library folder on an external drive before doing the install. The guy at the store said I could import the old emails/ mailbox/ folder structure and addresses into the new mail and address book using the files from my library.
    I tried to do this using the import functionality but it is putting everything in a mailbox called import.
    Does anyone know the proper way to do this? Should I replace the mail files with my old ones?
    Also should I use the import function for iPhoto or just drag all the photos over to the application? iPhoto is also having problems importing.
    Thanks for the help.

    That is what the guy at the Apple store had told me to do and what I have been attempting to do. However, it does not work.

  • Can't long in to iWeb after clean install of Leopard and upgrade to Snow

    I just recently did a clean install of Leopard and then upgraded to Snow Leopard. Everything is working ok except for iWeb. At first, I thought I had just forgotten my password but then I reset it. I logged on here with it and on iTunes. I can't edit my page at all. How do I get into iWeb now? The template I created through iWeb of course is not on my computer- it's just on my iWeb site. Can I call to get someone th help me or do I need to start all over. How do I do that because I have a subscription?
    Thanks
    Daniel Arnold

    heatharnold wrote:
    ...do I need to start all over.
    Daniel ~ Welcome to the discussions. If you didn't backup iWeb's key Domain file before the clean install, you'll probably need to start over. I say "probably" because even though you didn't deliberately back up the Domain file, perhaps you were running Time Machine — in which case, there's still hope:
    Recovering items using Time Machine and Spotlight
    Only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
    Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb.
    You can manually back up the Domain file, or use Backup to back it up.
    Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWebBackupretrieve.html
    And in future:
    _iWeb ’08: Backing up your Domain file_

  • "Clean Install" Snow Leopard on Tiger using 30 eur DVD. Legal or not?

    Hi!
    I have two questions:
    1). Is it possible to use the "cheap" 30 euro DVD to "clean install" Snow Leopard on 5yrs old MacBook running Tiger?
    By "clean install" I mean to erase the hard drive and then install the new operating system (Snow Leopard).
    I have read that is possible technically but is it legal?
    2). Is "Clean Install" and "Upgrading" similar or different from a legal point of view?
    A clean install is when you erase your hard drive and then install the operating system. An upgrade is when you just overwrite the operating system and keep other files in place.
    Thanks,
    D.M.

    1. Yes.
    2. They are different.  The former requires first erasing the drive while the latter upgrades an existing system.

  • With the Clean Install of Leopard System Slowness

    I have a MacBook Pro 2.0 Core Duo 2GB RAM (first generation)Mac OS 10.5.1 w/recent updates.
    Initially, I did an upgrade from Tiger to Leo and there was no slowness. I was asked one of the external audio interface manufacturers that their driver might not work properly if upgraded from Tiger to Leo (without clean install). It needs a clean install so I performed a clean install of Leopard.
    Now, my MacBook Pro is slow when I try to run (start) an applications e.g. Logic Pro 8 or when I try to navigate through folders. There is a delay in displaying icons or opening files.
    Are there any services or back ground applications that I can turn off? Has anyone else experience similar issue?
    Thanks
    Mitch

    thats happening all the time. it is not a one time thing. if there was a run away process it should get killed when a reboot is performed right?
    it appears that i have to modify Leo so that only needed services and apps running but not sure which one to kill

  • Clean install of Leopard made my system run slow

    I have a MacBook Pro 2.0 Core Duo 2GB RAM (first generation)
    Initially, I did an upgrade from Tiger to Leo and there was no slowness. I was asked one of the external audio interface manufacturers that their driver might not work properly if upgraded from Tiger to Leo (without clean install). It needs a clean install so I performed a clean install of Leopard.
    Now, my MacBook Pro is slow when I try to run (start) an applications e.g. Logic Pro 8 or when I try to navigate through folders. There is a delay in displaying icons or opening files. There is a huge delay when I try to switch from Arrange windows.
    Are there any services or back ground applications that I can turn off? Has anyone else experience similar issue?
    Thanks
    Mitch

    thats happening all the time. it is not a one time thing. if there was a run away process it should get killed when a reboot is performed right?
    it appears that i have to modify Leo so that only needed services and apps running but not sure which one to kill

  • Glitchy Display after Clean install of Leopard (G5 dual 2 GHz, Radeon 9600)

    Hello,
    I'm having weird glitchy display issues after a clean install of Leopard on my work machine. There was years of crap on this machine, several user accounts and it was extremely slow. I was advised by my tech guy to wipe the HD and do a clean install of OSX Leopard and all my Apps (Adobe CS3 & Extensis Suitcase X1).
    I immediately noticed glitchy display issues. First, when i scroll over anything with my mighty mouse it leaves a trail of glitchy weirdness where my cursor was:
    http://i6.photobucket.com/albums/y239/dylandog/screenglitch2.png
    Second, in certain applications if i move a window my clicking and dragging the top bar or a window it starts "disintegrating" and getting all pixelated. If i shake the window while doing this it gets worse:
    http://i6.photobucket.com/albums/y239/dylandog/screenglitch1.png
    I ran software update thinking that would help...Still doing it.
    I also installed 4 GB of memory (the max for this machine) to try increase speed. It did increase speed, but I'm still experiencing the display issues.
    I'm going to run the CS3 updates now...I doubt that will fix it, but you never know.
    Does anyone have any suggestions on how, or what to do to fix this?
    Thanks in advance!!
    BTW, The specs on my machine are as follows:
    Power Mac G5
    Dual 2GHz circa 2005
    4GB RAM
    ATI Radeon 9600
    30" Cinema Display
    19" Planar PL1910M LCD
    OSX 10.5.1
    Message was edited by: Justin Lancaster

    Many people have reported that there ATI 9600's don't work well in leopard. Most were able to fix the problem by installing old ATI drivers, including me. I still get glitches but only when going from a full screen w/thousand color back to a million colors, but the glitches only affect the docks stacks.
    The guide can be found here: http://interandom.com/2007/10/31/leopard-ati-radeon-9600/
    Let us know how it goes. Good Luck.

  • HOW TO DO A CLEAN INSTALL OF LEOPARD?

    UNFORTUNATELY MY IMAC COMES WITH TIGER PREINSTALLED AND NOT LEOPARD AS THEY PROMISE TO ME, THEY ARE GOING TO SEND ME A DISC... I JUST WANT TO KNOW HOW CAN I DO A CLEAN INSTALL OF LEOPARD WITHOUT HAVIND TO INSTALLE IT OVER TIGER?
    I think if i installed from whe tiger os, i will keep some parts of tiger.

    If your mac is new and you do not have anything on your system that you want to save then do a new install, When the installer asks you to select the destination ( HD) also open the option button and select the new install and select the extended format for the HD. Also the archive and install should work well for you.

  • I can´t view any PDF-files. Nothing happens when I click on a PDF-file. For some weeks ago we installed Adobe CreativeSuite6 on my computer. What should I do?

    For some weeks ago we installed Adobe CreativeSuite6 on my computer. What should I do?

    Hi Daniel ,
    What happens when you try to open a PDF ?
    Are you facing challenges with all the PDF' or any specific one?
    Please refer to the following link for more information regarding the same .
    Let us know how it goes.
    https://helpx.adobe.com/acrobat/kb/cant-open-pdf.html
    Regards
    Sukrit Dhingra

  • I had a failure of a dsl modem which inturn destroyed my ethernet port of non isight imac G5.  In attempt to solve the problem I did a clean install of leopard 10.5.4. I am unable to upate to 10.6,.7  or .8 without freezing system network preferences

    Dsl modem failure caused malfunction of ethernet port.  In attempt to solve problem I did a clean instillation of  Leopard 10.5.4 and then update to 10.5.5 with access to internet through apple usb to ethernet adapter.  If I attempt to update software to 10.5.6, .7 or .8 it freezes my network system preferences and computer will no longer shut down.  The network connection assistant also no longer sees a connection to the internet throught the usb/ethernet adapter.  I have checked they systerm Tech tool deluxe which shows no problems and also used hard drive utility on instillation disk which found no problems.  Permissions were also checked as well and no problems noted.  Any thoughts as I really like my imac G5.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.

  • HELP! Want to do a clean install of leopard the right way, but how?

    Hello, I am currently running 10.4.10 on a G5 quad with two internal drives, one 500 and one 250.
    Currently, my apps and OS are on the 500, and my plan is to do a clean re install of the OS and all applications on the 250 gig drive, and use the 500 for data.
    My question is:
    I am assuming that if I wipe my drives clean, I will have to begin my clean install with the original discs that came with the machine (10.4) if I want to have the apps that were originally installed when I bought the machine, correct?
    Or, do I wipe the 250 drive and do a clean install of just leopard on the 250 gig drive and reinstall all my apps (CS3 and FCStudio02), and then wipe my 500 gig drive after backing up all my data? Then I won't have the apps that came with the original OS that was installed when I got the machine, correct?
    If I do the first method, re installing op system 10.4, do I have to do all of the software updates to get back up to 10.4.10, or can i go from 10.4 directly to 10.5?
    I want to do this as painless as possible without shooting myself in the foot. I am really looking forward to the new OS.
    Heard also that its not compatible with after effects CS3?
    Thanks for your help!
    zeech

    If you have any files on the 250 GB disk you can copy them to the 500 GB disk, use a program like Apple's 'Backup' (available to .Mac users), etc. You can use it to create archive files of the entire 250 GB disk on the 500 GB disk if there is enough room. (At this point you should also make a back up or archive copy of the 500 GB disk in case you need to get Tiger back up and running if thing don't work out just right - but I don't suppose you have a spare 500 GB or bigger drive laying about!)
    Then, with the 250 GB clean of any files or folders, you can start the computer with the Leopard install disk. During the installation the app will ask which disk/partition you want to install to. That should be straight forward. With two operating systems (Leopard on the 250 GB, and Tiger on the 500 GB) you can use the migration utility, or simply install new the apps to the 250 GB drive. What ever you decide, make sure you first backup any data/files/folders that you might over write or delete. This will also allow you to 'try' Leopard and see if you have any problems before wiping out the 500 GB drive.
    Resetting the Parameter RAM (aka PRAM) is also a good idea before you actually install, when you boot up the install disk. (see http://docs.info.apple.com/article.html?artnum=86194)
    One final note - with two bootable partitions, you can hold down the Alt/Option key on boot up (after hearing the 'chord') which will should bring up a screen to allow you to choose which OS to start up - Leopard on the 250 GB, or Tiger on the 500 GB) - however, this doesn't work on all Macs.
    Good luck!

Maybe you are looking for