Clean Install of Lion with FileVault

Hi,
I was planning to do a clean install of lion but wondered if I should switch off FileVault2 before I do anything then once the install is done re-enable it or doesnt it matter?
I have a SuperDuper clone with filevault.
Thanks
Gavin

Yes, it should. I was successful with my Win7 Boot Camp partition. But as always, be sure to backup the Windows partition, with a cloning utility if posssible, just in case...

Similar Messages

I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work docum The installation run perfectly,

I have just made a clean instalation of Lion, with a bootable disk, and I planned to restore my files (music, photos, etc.), The installation run perfectly, but Lion doesn't find my backup files. So, I'm about to loose all of my iTunes library, work documents (I'm a lawyer!!), my kid's photos.... How can I restore my files?? Help!!

Since you seem to be using a new disk for Lion, Time Machine will consider previous backups to be for a "different" computer. Try doing a control-click or click-and-hold on the Time Machine icon in the Dock, then choose "Browse Other Time Machine Disks". This should allow Time Machine to see the previous backups.
In the worst case you should be able to open those Time Machine backups and copy your documents from there to your home folder.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Clean install of Lion with Final Cut Express

I use Final Cut Express and Aperture 3 as my main pro software.
Recently when I wiped my boot drive and reinstalled Snow Leopard I found I had to install Final Cut Express first before doing the software
combi update and then installing the rest of my software.
If I now do a clean install of Lion from a backup I have already made from the download last week, is this going to be possible to continue using
FCE4 rather than installing Snow Leopard first and then Lion on top off.
Thanks in advance for your help.
Matt

Yes, it should. I was successful with my Win7 Boot Camp partition. But as always, be sure to backup the Windows partition, with a cloning utility if posssible, just in case...

Clean install of Lion with a bootcamp partition

On my MacBook Pro Snow Leopard and via Bootcamp is Windows XP installed.
I wanna do a clean install of Lion, but can this been done without disturbing the XP-Installation?

Yes, it should. I was successful with my Win7 Boot Camp partition. But as always, be sure to backup the Windows partition, with a cloning utility if posssible, just in case...

IChat with clean install of Lion, video slow on Core2 Duo

After a clean install of Lion on a newer iMac things are MUCH faster than when I had installed it OVER Snow Leopard.
However, ichat video is about 1 second slower than the audio and frame rates (of my own video) are about 5 frames per second.
Full screen makes it worse.
Anyone have any ideas? I have not installed any files or apps (except Flash for safari).... this is a FRESH Lion install from the Apple USB Lion. Wiped drive prior to install.
Definitely frustrated with 10.7.... and I have it on 3 different Macs.... wishing I didn't.

OK, you're right. I wish Apple would get rid of the Applications Folder in the User Folder.
If you haven't read this yet:
How to use Migration assistant to transfer files from another Mac
I still believe you are relatively safe in not porting over trouble from your previous System.
What trouble are you having

Would a clean install of Lion Help

Sorry if this has been covered before. This is my situation: Snow Leopard was stable and a really great experience from moving away from windows, but in Oct I upgraded to Lion. Since then all I've had is problem after problem. Safari is a nightmares, hanging a lot, my printer only work if I plug it in via USB, the spinny ball is a daily friend, and my mac hangs far too often. Though my swearing has improved greatly. I would go as far as to say Windows XP is far less stressful then Lion. I would really like this to end as my opinion of Apple is not good. I know I'm not along on this issue so would a clean install of Lion help or would an clean install of Snow Leapard be better? Rant over...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

How to do a Clean Install of Lion

Hope this will help someone.
I recently did a clean install of Lion on my Mac Pro (after doing an earlier Lion upgrade) and the performance difference is absolutely amazing. Before my Mac Pro was laggy and there all kinds of little glitchy bugs (I'm sorry I can't explain it better than that) with a lot of my applications. Since I use that machine to also administer the network, that just wasn't acceptable.
I'm convinced, after this experience, that a clean install of Lion is the best thing for me, so, this morning I decided to do the same thing to my MacBook Air (IMHO the best laptop ever invented).
Here's what I have done.
1. Download and install Carbon Copy Cloner to the laptop.
2. Clone the laptop hard drive to an external hard drive. I have a Seagate 500GB USB drive which had a 500GB partition with Lion already installed on it. There are instructions all over the web on how to install Lion to an external drive. I used disk utility to add a partition, effectively splitting the partition in two with Lion still installed on one of the partitions and the other partition "clean".
3. Donate to Mike Bombich's site. Carbon Copy Cloner is a remarkable program - I've paid a heck of a lot of money over the years for similar programs and they didn't work 1/2 as good.
4. Go into System Preferences, select the "Startup Disk" applet and select your Lion install on the external hard disk drive as the startup disk. I SUSPECT you could also set the cloned laptop partition as your startup disk, but since the Lion install was already on my external drive, I used that.
5. Reboot the laptop
6. Hold down Command + "R" during the startup process to boot to the recovery partition of the Lion install on the external disk.
7. When the menu pops up, select Disk Utility
8. Repartition your laptop hard disk drive. This will also erase everything on the laptop. You can not repartition your hard drive unless you are booting from an external install of Lion. The recovery partition is hidden so repartitioning the drive will fail if you try to do a clean install from your laptop.
9. When the partitioning is finished, quit Disk Utility and return to the previous menu.
10. Select "Reinstall Lion" and select your laptop hard disk drive as the target.
11. You'll have to authenticate to Apple with your Apple ID, so there should be no problem with downloading and reinstalling Lion.
12. Wait for the download and install to finish. The download will take longer than the install.
13. During the setup, use the Transfer Assistant to transfer the cloned drive items to the new Lion install.
When the TA and install is finished, you should be back to where you started with everything intact.
Good luck!

Hope this will help someone.
I recently did a clean install of Lion on my Mac Pro (after doing an earlier Lion upgrade) and the performance difference is absolutely amazing. Before my Mac Pro was laggy and there all kinds of little glitchy bugs (I'm sorry I can't explain it better than that) with a lot of my applications. Since I use that machine to also administer the network, that just wasn't acceptable.
I'm convinced, after this experience, that a clean install of Lion is the best thing for me, so, this morning I decided to do the same thing to my MacBook Air (IMHO the best laptop ever invented).
Here's what I have done.
1. Download and install Carbon Copy Cloner to the laptop.
2. Clone the laptop hard drive to an external hard drive. I have a Seagate 500GB USB drive which had a 500GB partition with Lion already installed on it. There are instructions all over the web on how to install Lion to an external drive. I used disk utility to add a partition, effectively splitting the partition in two with Lion still installed on one of the partitions and the other partition "clean".
3. Donate to Mike Bombich's site. Carbon Copy Cloner is a remarkable program - I've paid a heck of a lot of money over the years for similar programs and they didn't work 1/2 as good.
4. Go into System Preferences, select the "Startup Disk" applet and select your Lion install on the external hard disk drive as the startup disk. I SUSPECT you could also set the cloned laptop partition as your startup disk, but since the Lion install was already on my external drive, I used that.
5. Reboot the laptop
6. Hold down Command + "R" during the startup process to boot to the recovery partition of the Lion install on the external disk.
7. When the menu pops up, select Disk Utility
8. Repartition your laptop hard disk drive. This will also erase everything on the laptop. You can not repartition your hard drive unless you are booting from an external install of Lion. The recovery partition is hidden so repartitioning the drive will fail if you try to do a clean install from your laptop.
9. When the partitioning is finished, quit Disk Utility and return to the previous menu.
10. Select "Reinstall Lion" and select your laptop hard disk drive as the target.
11. You'll have to authenticate to Apple with your Apple ID, so there should be no problem with downloading and reinstalling Lion.
12. Wait for the download and install to finish. The download will take longer than the install.
13. During the setup, use the Transfer Assistant to transfer the cloned drive items to the new Lion install.
When the TA and install is finished, you should be back to where you started with everything intact.
Good luck!

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

Is it possible ro clean install Mountain Lion over Mavericks on a brand new mac mini

Is it possible to "clean Install" mountain lion over mavericks on a brand new mac mini

Actually evrything I can find states that the last mini to run SL was 2010.
It appears that the 2012 mini's shipped with Mountain Lion and later Mavericks. Link
Also why would the OP need a bootable SL installation media when they want to install ML?

How can I restore my contacts from a snow leopard time machine to clean instal of Lion

I recently did a clean instal of Lion (which was wayyyyy to difficult by the way--why this wasnt an easy option to begin with I do not know and am not happy about).
In my sleep depravation from the previous problem I accidentally synced my contacts from mobile me to take my computer contacts (deleting all my contacts from my phone and computer).
Fortunately I have a back up on my time machine from my previously installed Snow Leopard.
I tried to restore these files, but they seem to not be compatible.
Steps I took:
1.) -Opened Address Book in Lion
-Opened time machine
notes: i could not go backward in time with lion address book
2.) -Copied files from time machine address book to desktop
-completely unable to open files.
I do not want to use migration assistant because it seems to want to take ALL my files over and frankly thats not what I want to do at all.
PLEASE HELP!

Hi,
See this Excellent Link by Pondini on TM:
http://web.me.com/pondini/AppleTips/Index.html
May be Helpful...

New boot drive and a clean install of Lion

I have a Mac Pro with multiple internal hard drives. My Lightroom catalogs are on one disk, my actual photos are on another, and my OS is on a 3rd. I recently decided to upgrade my 7200rpm SATA boot drive to SSD. In the process, I also did a clean install of Lion. None of my data was moved, as it was all on separate internal drives.
I have the new OS installed, and I reinstalled Lightroom 3. I should also mention that whenever I import files from CF cards (using a card reader), I import as DNG. I only shoot RAW.
When I launch Lightroom and look at my previous work, or the shoot that I was working on prior to the upgrade, I notice that (at least) the following is missing: flags, ratings, edits. I think I can live without the flags and ratings (though I would love to get them back), but I thought the whole idea of DNG was to store the sidecar "edits" file with the RAW file in one package. Shouldn't I be able to see my crops, treatments, localized brush edits, etc.?
What am I doing wrong and what can I do to remedy the situation?
Thanks very much in advance.

You need the original catalog file. You should have copied this over to your new instillation and then just opened it, rather than reimporting files.
If, as you seem to be saying, your catalog is not on the OS disk then all you need to do is open this after reinstalling LR, rather than creating a new catalog as you seem to have done. Just find the original catalog and open it from LR, or double click on it from Finder when LR is closed.
If you have not kept a copy of the catalog file, then you could use your most recent back up of the catalog, hopefully you made regular backups using LR's backup system and did this to a separate drive.
However if you have re imported the files then any edits that have been actually saved to the files will be read by LR. You do have to actually write the edits to the files, either by choosing to do this automatically in LR's preferences or by clicking on the update metadata in LR, otherwise these edits are not written to the files (or as xmp files when using propitiatory file types. If you didn't write the changes to file then LR has nothing to read.

How can I wipe my hard drive and clean install Mountain Lion?

Hi I have a 21.5 inch mid 2011 iMac running Mountain Lion, I want to wipe my hard drive and clean install Mountain Lion. I dont want all my stuff back, just photos and music, the rest I'll reinstall my self. I also dont have a exteranl harddrive. only two USB's one 2 GB and the other 8 GB. How do I do this? And I dont want to pay for mountain lion again. Thanks!

I made my partition and am currently reinstalling mountain lion to put on my flash drive. I'm using Lion disk maker 2 thats compatible with mountain lion. I'm doing it right, correct?

New hard drive, clean install of Lion, but MacBook Pro is still freezing

Hi everyone,
Even the folks at the Apple store don't seem to know what's going on with my MacBook Pro.
My hard drive crashed a few weeks ago. I bought a Western Digital Scorpio Blue and replaced it myself. The MacBook didn't seem to like it (lots of freezing, going really slow, etc) and so, after reading online that many MacBook Pro users did not like the WD Scoprio Blue, I returned it and bought a 320 GB Hitachi. Before replacing the WD drive with the Hitachi drive, I used SuperDuper! to make my external hard drive a clone of the WD hard drive. I replaced the WD with the Hitachi, booted from the external, and then restored all my stuff to the Hitachi. The computer still didn't work so well, so I did a zero-out erase and a clean install of Lion. I dragged my files over individually (only about 100 GB of word documents, music, and photos). For the first two days, everything worked perfectly. Then I started getting these error messages:
Word: Word cannot save or create this file. The disk may be full or write protected. Try one of the following. *Free more memory. *Make sure that the disk you want to save the file on is not full, write-protected, or damaged.
Chrome: Your profile could not be opened correctly. Some features may be unavailable. Please check that the profile exists and you have permission to read and write its contents.
Dragging files to trash: The operation can't be completed because an unexpected error occured (error code -50).
Fireforx: Close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time.
In addition, the computer kept freezing. I also had problems with Mail and iTunes. Disk verify, permission verify, S.M.A.R.T. utility all said that the hard drive was working fine though.
So, I brought the computer to Apple. They did a zero-out erase, reinstalled Lion, and did what they called a "software repair". They said it should work fine. I just got home from the store, booted up the computer, and it's barely working. All sorts of error messages, safari won't work, it keeps freezing, and I was only able to open disk utility once. I verified disk, and it came up with no problems. I verified disk permissions, and when I tried to repair disk permissions, it kept saying it was "unable" to.
I don't know what it could be. It's not the hard drive...I've run disk utility, S.M.A.R.T., and an app that checks the hardware associated with the drive. All of these programs say the hard drive is absolutely fine. I've also reset PRAM. Another thing worth noting is that I'm currently booting/working off of my external, and it works absolutely perfectly.
Any ideas? One of my friends suggested I go back to Snow Leopard, but I don't see what difference that would make. Please help! Anything would be very much appreciated! Thanks!!

The theory is that you have a weak bit in one of the modules, and sometimes (rarely) it flips over. The trick is to try and catch it.
If you move the modules, the weak bit will be at a different Address in memory. Different things will be loaded into the word with the weak bit, and the symptoms may be different.
It may not do anything at all. But it is so easy to try, it is worth a shot.
On a multi-module memory, you need to keep your wits about you when doing this, or you put them back the way they were originally. So you should pick a direction and always move them your "regular" direction.

Clean Install Questions - Lion

After reading through a few discussions, it sounds like performing a clean install would help with a lot of the issues I am experiencing with Lion. 1) I already have Lion installed, 2) I have added a bunch of stuff since my backup prior to Lion, so I can't use that backup for the clean install.
Basically I would like to clean up all the random folders on my computer without losing any of my information. Basically folders like System and Library are probably filled with junk I don't use anymore, applications I didn't uninstall correctly, random junk, etc. and hopefully a clean install can get rid of all this. I would like for all of my preferences to carry over (not necessarily overall system settings as these are pretty easy to change) but preferences for specific apps. I would also really like it if all of the stock Apple apps would get reinstalled because I have some duplicate apps (chess, text edit, stickies, image capture, etc.) that I cannot delete.
I wouldn't be opposed to doing a clean install and then only moving over the apps I use, my music, my photos, etc. but I am worried that other things will be affected. For instance not being able to sync my iphone because it won't recognize my computer?
Any insight on this would be really helpful; specifically what the process of a clean install is (cmd+R .....), and what files are affected.

skaiser wrote:
I already have Lion installed so I can't download the installer again
Actually you can.
"To redownload the installer on a computer running OS X Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install Mac OS X Lion item doesn't change to "Install" and allow you to download Lion, use Spotlight to search for "Install Mac OS X Lion" on your computer."
I haven't tried this out yet as I'm setting up my machine on another OS right now.
You can backup your files to a external drive, disconnect and then hold command + r to enter the Recovery Partition looks like this.
You need a internet connection, so just have a Ethernet connection before you boot into Recovery, it's easiest as Wifi is flaky here.
You can download and reinstall Lion again right over Lion already installed.

Reinstall Apple software after clean install of Lion on 2009 IMac

Completed a clean install of Lion on 2009 IMac, which initially reacted poorly to an upgrade (my first attempt to move to Lion). How do I reinstall iPhoto, Garageband, Aperture, Final Cut Express, iMovie, Logic Express? These were all preinstalled with original purchase. How would I find the serial numbers that will inevitably be asked for? The App store wants to charge for these items, and other non-Apple software I've purchased for the App store won't download again. Multiple issues! Any suggestions?

You'll need to use the DVD's that should have accompanied your system when you bought it.
Prior to the App Store when you purchased a system from Apple that included installed software such as iLile or Final Cut the DVD's were always included in the box. The serial numbers will be on the DVD boxes or DVD's themselves.
regards
Concerning the App Store purchases if you long into the APp Store using the same Apple ID you used when you bought the software you should be able to download again without charge. At least this is how it works for Apple software don;t know if 3rd party stuff has different rules

Clean Install of Lion with FileVault

Similar Messages

Maybe you are looking for