Clean install of Windows 7 Ultimate 64-bit on Qosmio X870

When I received my laptop (Qosmio x870) I immediately uninstalled its OS since it was filled with bloatware and installed a clean version of windows 7 ultimate 64 bit. After my install I have been trying to install the drivers on my laptop, but some don't seem to be working.
My VGA driver has installed, but the windows experience index for my graphics is 5.5 which is much lower than it should be (if memory serves right it was 7.4 before I uninstalled the original bloated O.S). However, the biggest problem I have come across is the Network driver. I have installed every single network driver on Toshiba's driver page for the qosmio x870, but none seem to work. For some reason the laptop thinks my wifi is turned off, which I know is not (unless there is a setting in bios which should be changed otherwise I really don't know).
I really need some help here guys, if someone can point me to the EXACT drivers I absolutely need it would mean the world to me. Toshiba should really have a bundle of essential drivers, like most other computer companies have, it makes everything so much easier for people who hate the bloated O.S that comes with their laptop.

I found a driver installation list for X870 and this installation order is required:
Win 7
Intel Chipset SW Installation Utility 9.3.0.1020
Intel Management Engine Interface 8.0.3.1427
Intel Display Driver 8.15.10.2712
or
Intel Display Driver 8.15.10.2712
NVIDIA Display Driver 8.17.12.9555
or
NVIDIA Display Driver 8.17.12.9631 for 3D model
Intel Rapid Storage Technology Driver 11.0.0.1032
Realtek Audio Driver 6.0.1.6581
NVIDIA HD Audio Driver 1.3.9.0
SRS Premium Sound 3D 1.12.1100
Synaptics Touch Pad Driver 15.3.41.7
Atheros LAN Driver 2.0.12.13
Intel Wireless LAN Driver 15.0.1.1.0.s64
Intel Wireless Display 3.0.12.0
or
Realtek Wireless LAN Driver 1005.24.0712.2011|2002.2.0110.2012
or
Atheros Wireless LAN Driver 9.2.0.462.1.
Intel Proset 15.0.0.0.3
Realtek Bluetooth Filter Driver Package v2.3.9.0206.2012
Atheros Bluetooth Filter Driver Package v1.0.12
Bluetooth Stack for Windows by Toshiba v9.00.00T
Intel USB3.0 Driver 1.0.4.220
Realtek Card Reader 6.1.7601.29006
Nuvoton CIR Driver 8.1.64.1009
YUAN DVB-T/ATSC Tuner Driver 6.0.111.16
TOSHIBA Supervisor Password Utility v2.1.0.3
TOSHIBA HW Setup Utility v2.1.0.8
TOSHIBA Fingerprint Utility V1.0.3.54
TOSHIBA Value Added Package 1.6.0022.640207
HDMI Control Manager 2.0.2.1.64B
TOSHIBA Web Camera Application V2.0.3.33
TOSHIBA Remote Control Manager 3.0.1010.1 [For 3D button]
PatchFiles TosVolRegulator_1.1

Similar Messages

[XI 3.1] Issues during "Clean" install on Windows Server (64-bit) OS

Started setting-up a SANDBOX yesterday of BOE-XI (Release 3.1) on a "Clean" Windows Server (64-bit) OS.
I hit a couple of issues that I think may be related to the DEFAULT "Program Files" location on the OS being...
C:\Program Files (x86)\
...rather than...
C:\Program Files\
I chose to install the MySQL database and the IIS and Tomcat DEFAULTs for the CMC and InfoView.
BOE-XI (Release 3.1) said that it ran OK, but we had two issues that we are now cleaning-up...
1.) SIA did not install / appear in CCM. Had to manually create a new one.
2.) Tomcat InfoView and CMC were OK, but the .NET (IIS) InfoView throws a "The page cannot be found" error when trying to connect to...
http://<servername>/InfoViewApp/logon.aspx
Anyone seen this issue before - or have a link to a "Best Practices" document for installing on BOE-XI (Release 3.1) on the Windows Server (64-bit) OS...?
Thanks in Advance!

Hi,
I am also experiencing this issue with Crystal Reports Server XI installed on 64-Bit Windows Server 2003 Enterprise Edition.
I am also getting the following error when trying to view reports
The Page Server you are trying to connect to is not accessible. Please contact your system administrator.
Unable to retrieve Object.
The Page Server you are trying to connect to is not accessible. Please contact your system administrator.
Does anyone know how to resolve this?
Brian

Doing a clean install of Windows 7, 64 bit. but don't have the necessary drivers for my dv6t-1300

When I searched on drivers for my machine all I get is an offer to scan it for new ones.
I need to download and store all the appropriate drivers so I can reformat the hard drive and do a complete reinstallation of everything.
Where can I find my drivers?
This question was solved.
View Solution.

Hi,
All the drivers and software available to download for your notebook can be found on the following link - ignore the 'Scan Now' option.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3999...
If you can still boot into Windows, another option is to back-up the swsetup folder stored at the root of the C drive - this will contain installers for all the drivers and software that came with your machine ( the only exception is usually trial versions of MS Office ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error 0x80300024 when trying to install Windows Ultimate 32 bit on a T60

I have been trying to install Windows Ultimate 32 bit on a T60 with a 128GB Solid state hard drive and I keep getting the error "Windows cant install to the current location Error code 0x80300024" I have formatted the drive in another PC, created the bit locker partition, but still windows says it is "unallocated space" Can anyone help please
Moderator note: OS corrected in subject line

Says "A problem occurred while extracting the archive. Please try downloading the Photoshop Lightroom 5.7.1 installer again".
Thanks!

How to do a CLEAN INSTALL of Windows 8.1 with a Windows 8 OEM Key

I have recently purchased a new C540 that has Windows 8 already installed on it. I would like to perform a clean install of Windows 8.1 on this computer.
This is what I have done so far:
I disabled 3 things in the BIOS: IIRC, they were secure boot, quick boot, and something about "optimized" startup
I have changed my boot priority to put the CD/DVD drive first and any flashdrive 2nd
I have figured out my OEM Windows Product Key (this is for a Windows 8 Core/64 bit OS)
I have setup a flashdrive with Windows 8.1 on it
I tried to boot from the flashdrive...when I get the option to install windows 8.1, I click on it and very quickly get the following error -- "The product key entered does not match any of the Windows images available for installation. Enter a different product key."
I added a PID.txt file with my OEM product key in the Source folder of the Windows 8.1 install....I don't get the above error message immediately, but a screen comes up that asks me to enter a Product Code...my OEM product code (being for W8, not W8.1) does not work while using a generic key (for Windows 8.1 Core) yields the same error message as above and exits the installer.
I then added an EI.CFG file that sets the edition to core, the version to OEM, and the Volume to 0...unfortunately, when trying to install Windows 8.1 it still asks me for a product key before installing...I cannot get past this screen even though (to my understanding) the EI.CFG file should cause the installer to skip asking for a product key...
It is important to me that I get to perform a CLEAN install of Windows 8.1...I do not want to upgrade through windows store...the only keys I have are a W8 Pro Retail key (for my laptop) and a W8 Core OEM key (that came with the new C540)...I am using a flashdrive to perform this since I knew I may have to add/change files like the PID and EI.CFG....
I would appreciate any help I can get in solving this problem...I am also willing to try burning an .iso with the PID and/or EI.CFG, but I'm trying to avoid trial and error with that since it is time consuming, requires an ADK, and may waste DVDs...I'd only make an .iso if (for whatever reason) that would work where a flashdrive woud not...

I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install. I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software. It asks for the product key. I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
How id I get my single Windows license onto my new SSD HD? Reload, clean install, ???
How do I get the proper product key or confirm it is correct?
It is a new system with little data that I need to copy. I just want the operating system. I have the driver disc that came with it.

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

For such situation, I'd suggest the following:
1. Remove current installed office with the fix-it tool in
KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
2. Either download a trial version of Office 2013 from
http://office.microsoft.com/, or from
http://technet.microsoft.com/en-us/evalcenter/jj937170
3. Reboot your computer in clean boot mode, and run setup again
Max Meng
TechNet Community Support

How to perform a clean install of Windows 8 / 8.1

This document describes, how to perform a clean install of Windows 8.
Windows 8 System Requirements
1 GHz or faster processor (with PAE, NX and SSE2 support)
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
16 GB available hard disk space (32-bit) or 20 GB (64-bit)
DirectX 9 graphics device with WDDM 1.0 or higher driver
Additional requirements to use certain features:
To use touch, you need a tablet or a monitor that supports multitouch.
To access the Windows Store and to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768.
To snap apps, you need a screen resolution of at least 1366 x 768
More Info: http://aps2.toshiba-tro.de/kb0/TSB2903E20000R02.htm

I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install. I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software. It asks for the product key. I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
How id I get my single Windows license onto my new SSD HD? Reload, clean install, ???
How do I get the proper product key or confirm it is correct?
It is a new system with little data that I need to copy. I just want the operating system. I have the driver disc that came with it.

How save factory software on T400 and reinstall after clean install of Windows 7

Hi
I have a Thinkpad T400 2764-CTO Running Vista Business 32-bit and want to do a clean install to Windows 7 Pro.
Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

Please review the HP software and driver download page for drivers/software that are compatible with Windows 7. Also note that there is a BIOS update for Windows Vista that improves the system's ability to function with WIndows 7. Also read "Alerts" and other information regarding this product and Windows 7.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How backup/save software installed on T400 before doing clean install of Windows 7?

Hi
I have a Thinkpad T400 2764-CTO Running Vista Business 32-bit and want to do a clean install to Windows 7 Pro.
Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

"In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?"
As Maliha said (or implied) that doesn't work. Just copying installed programs doesn't set up the registry entries or any data folders and files they may use in your user files.
You might consider copying your entire user directory to large flash or DVD or external hard drive as a way to preserve your personal data and program data files. Things like Thunderbird mail or Firefox bookmarks are in C:\users\kathleenklein\appdata\... (which may not be visible unless you make them so) and can be plugged back into your Windows 7 install.
"I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated."
First, have you made your factory recovery media? That ensures that you can revert to factory Lenovo setup if you ever want to. To give the machine to your little brother, for instance. It will burn a pair of CDs and one or more DVDs.
You can/should also use R&R to save a current whole-disk image to external media. That lets you fall back to your current setup if necessary. This is likely to be fairly large. An external hard drive is usually required. Use advanced R&R to set up the target and start things off. Once you are sure that Win 7 is going to work for you, you can get rid of the saved Vista image and use the drive for your Windows 7 backups. You do make backups...
R&R can't (AFAIK) save your Vista user stuff and restore it to WIn 7.
Is this a clean install using Lenovo media or is it Microsoft vanilla? I just did a MS Vanilla 7 install. Since the service and recovery partitions in the Lenovo Visa drive configuration will be useless in a WIn 7 install (if MS vanilla) I used the advanced option and had the Win 7 install delete all partitions and just do its thing. It created a small boot partition and used the rest of the drive for C:
After installing '7, install the latest TVSU and let it pull down the basic/necessary Lenovo drivers and apps. After that you may choose to install the latest R&R. Surprisingly, it can be used to make backups even without the Lenovo partitions present. I've verified that by making a full image and restoring to a bare drive.
It's handy to Install '7, do a MS update, install TVSU, do a Lenovo update, install R&R and then burn a recovery set of CDs and DVDs so you can rewind to a sort of base-usefull-initially-updated condition should that be necessary.
As you probably already know, start here for your Lenovo Win 7 downloads: ThinkVantage Technologies Updates
Likely more or less than you wanted - but you asked
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Satellite P305-S8820 - FN key not working after clean install of Windows 7

Hi,
I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
Any ideas?

Hello John
You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

Re: Satellite L650/0E8 - Clean install with Windows 7 64bit

Hello.
I have recently purchased a [Toshiba L650/0E8 notebook|http://www.mytoshiba.com.au/products/notebooks/satellite/l650/psk1ja-0e8017] and accidentally installed the Windows 7 32-bit version.
I've backed up a "recovery image" of my computer into 4 DVD-R's using Toshiba Recovery Media Creator. I need to use Adobe Master Collection CS5, but this requires the 64-bit edition in order to use After Effects CS5 and Premiere Pro CS5. I've gathered by reading some articles on the net that I have to do a "clean install", but as I've always had a technician set up my computer and have never used a Toshiba laptop before, I am unaware as to how to back up all my files, programs, drivers, etc before I reinstall Windows 7 to a 64-bit version.
Is that what those recovery DVD's do? Is there anywhere I can download the required Toshiba software/drivers for the 64-bit version? I apologise if these questions sound really silly. I am honestly rather confused as to what to do.

Hey,
First of all I must say its good that you created the Toshiba recovery disk as mentioned in user manual. :)
Some other users here forget it because they dont read their user manual.
Anyway, with this disk you can restore the preinstalled Windows version (Windows 7 64bit) with all drivers and tools. That means you dont need any additional drivers and tools from Toshiba, everything will be installed automatically. You get out of box settings back.
But if you use the Toshiba recovery disk it will wipe the whole HDD so you have to make a backup of all your important files that you still need after Windows installation.
Therefore I would recommend an external HDD. They provide a lot of disk space to backup all your data and with some models you get also backup software but you can also use the integrated Windows backup tool, its also nice and works well.
If you have more questions, please let us know! ;)

[Helix gen2] Clean Install of Windows 8.1 - one unknown device left

Hi,
I did a clean install of win 8.1 with the suggested procedure (System Updater, Solution Center)
Unfortunately, there is one unknown device left in the device manager:
Intel(R) Serial IO SPI Host Controller - 9CE5
ACPI\VFSI6101\1
which I thought could be solved by this driver:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-helix-series-laptops/thinkpad...
But without success. So could anyone help? Which is the right driver? Or what should I do?
Thx Ralf
Moderator comment: New thread created. Subject edited to match. Was: Re: Lenovo Helix - Clean Install of Windows 8.1 - Best way to load Software and Drivers
Solved!
Go to Solution.

Good day and welcome to the community.
I found a few vague references of VFSI6101 being related to a Validity Fingerprint Sensor.
Looking at the Helix Gen2 driver pages: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-helix-series-laptops/thinkpad...
and specifically at the FPR software package page:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-helix-series-laptops/thinkpad...
there's a reference to: "Synaptics FP Sensors(WBF) VFS6101". Pretty close!
So you might try that to see if it clears up the orphaned device.
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Fingerprint Driver Install after clean install of Windows 7

I've performed a clean install of Windows 7 on my X300 (6476CTO). I downloaded and installed the Fingerprint Driver 5.9.2 for Windows 7 32-bit (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73583). However, everytime I reboot I get a message that the Fingerprint Reader cannot access dll file vtapip.dll and the fingerprint registration fails. What can I do to remedy this problem?
I did notice on the readme that machines running less than the 5.6 version of the fingerprint software should upgrade to 5.6.2 before installing newer versions. Does this include clean installs? If so, where can I get the 5.6.2 driver? I cannot currently locate it.
Thanks,
Mindy

I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
"TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
John

I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run. I have installed on Windows 7 64 bit , HP laptop i7

I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run /work. I have installed on Windows 7 64 bit , HP laptop i7.

sign out and then sign back in to your cc desktop app.
then install cc 2014.

Could anyone of you please who has a clean install of Windows 8.1 on the SSD drive look at some settings of certain services (below)?

Hi everyone,
could anyone of you please
who has a clean install of Windows
8.1 on the SSD drive look at some settings
of certain services (below)?
Thank you.
Prefetch and Superfetch. In registry located on way
HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\ Control\ SessionManager \MemoryManagement \PrefetchParameters.
I am interested in EnablePrefetcher and
EnableSuperfetch REG_DWORD value.
Just a number in parentheses.
ReadyBoot. In registry located on way HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Control \WMI\Autologger\ReadyBoot.
I am interested REG_DWORD value of
Start. Just a number in parentheses.
Run dfrgui command. Go to Change settings and have a look if SSD on which is the system installed is included in regular optimalization schedule.
Registry can be accessed running regedit command.

Hi,
Prefetch and Superfetch means that most commonly used files are stored to disk to be more quickly accessed later.
For Prefetch:
Disable Caching: 0
Cache Applications Only: 1
Cache Boot Files Only: 2
Cache Everything (default): 3
For SuperFetch:Disable Caching: 0
Cache Boot Processed Only: 1
Cache Applications Only: 2
Cache Everything (default): 3
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot\Start value means:
disable: 0
enable: 1
For more information about clean installation of Windows 8.1 on SSD, I suggest you read below article:
Windows 8.1 SSD Settings, Etc.
http://www.tweakhound.com/2013/11/02/windows-8-1-ssd-settings-etc/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Clean install of Windows 7 Ultimate 64-bit on Qosmio X870

Similar Messages

Maybe you are looking for