Clean install - Slow Windows Networking

I have done a clean install of 10.6
I can successfully login to my Windows 2003 server. But, the CONNECTING... takes an extremely long time, about 1 minute.
If I reboot the 1st time I try to connect it goes very fast. Any other time it takes about 1 minute.
Any Ideas?
Steve

Search for the opendns solution in this forum "Getting Online and Networking"
Appears to be an issue with the Windows dns server, as someone else pointed out (or your router´s dns proxy) - it cannot reversely resolve IPs/hostnames.

Similar Messages

  • Could anyone of you please who has a clean install of Windows 8.1 on the SSD drive look at some settings of certain services (below)?

    Hi everyone,
    could anyone of you please
    who has a clean install of Windows
    8.1 on the SSD drive look at some settings
    of certain services (below)?
    Thank you.
    Prefetch and Superfetch. In registry located on way
    HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\ Control\ SessionManager \MemoryManagement \PrefetchParameters.
    I am interested in EnablePrefetcher and
    EnableSuperfetch REG_DWORD value.
    Just a number in parentheses.
    ReadyBoot. In registry located on way HKEY_LOCAL_MACHINE\SYSTEM \CurrentControlSet\Control \WMI\Autologger\ReadyBoot.
    I am interested REG_DWORD value of
    Start. Just a number in parentheses.
    Run dfrgui command. Go to Change settings and have a look if SSD on which is the system installed is included in regular optimalization schedule.
    Registry can be accessed running regedit command.

    Hi,
    Prefetch and Superfetch means that most commonly used files are stored to disk to be more quickly accessed later.
    For Prefetch:
    Disable Caching: 0
    Cache Applications Only: 1
    Cache Boot Files Only: 2
    Cache Everything (default): 3
    For SuperFetch:Disable Caching: 0
    Cache Boot Processed Only: 1
    Cache Applications Only: 2
    Cache Everything (default): 3
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot\Start value means:
    disable: 0
    enable: 1
    For more information about clean installation of Windows 8.1 on SSD, I suggest you read below article:
    Windows 8.1 SSD Settings, Etc.
    http://www.tweakhound.com/2013/11/02/windows-8-1-ssd-settings-etc/
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Karen Hu
    TechNet Community Support

  • How to do a CLEAN INSTALL of Windows 8.1 with a Windows 8 OEM Key

    I have recently purchased a new C540 that has Windows 8 already installed on it.  I would like to perform a clean install of Windows 8.1 on this computer.
    This is what I have done so far:
    I disabled 3 things in the BIOS: IIRC, they were secure boot, quick boot, and something about "optimized" startup
    I have changed my boot priority to put the CD/DVD drive first and any flashdrive 2nd
    I have figured out my OEM Windows Product Key (this is for a Windows 8 Core/64 bit OS)
    I have setup a flashdrive with Windows 8.1 on it
    I tried to boot from the flashdrive...when I get the option to install windows 8.1, I click on it and very quickly get the following error -- "The product key entered does not match any of the Windows images available for installation. Enter a different product key."
    I added a PID.txt file with my OEM product key in the Source folder of the Windows 8.1 install....I don't get the above error message immediately, but a screen comes up that asks me to enter a Product Code...my OEM product code (being for W8,  not W8.1) does not work while using a generic key (for Windows 8.1 Core) yields the same error message as above and exits the installer.
    I then added an EI.CFG file that sets the edition to core, the version to OEM, and the Volume to 0...unfortunately, when trying to install Windows 8.1 it still asks me for a product key before installing...I cannot get past this screen even though (to my understanding) the EI.CFG file should cause the installer to skip asking for a product key...
    It is important to me that I get to perform a CLEAN install of Windows 8.1...I do not want to upgrade through windows store...the only keys I have are a W8 Pro Retail key (for my laptop) and a W8 Core OEM key (that came with the new C540)...I am using a flashdrive to perform this since I knew I may have to add/change files like the PID and EI.CFG....
    I would appreciate any help I can get in solving this problem...I am also willing to try burning an .iso with the PID and/or EI.CFG, but I'm trying to avoid trial and error with that since it is time consuming, requires an ADK, and may waste DVDs...I'd only make an .iso if (for whatever reason) that would work where a flashdrive woud not...

    I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install.  I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software.  It asks for the product key.   I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
    How id I get my single Windows license onto my new SSD HD?  Reload, clean install, ???
    How do I get the proper product key or confirm it is correct? 
    It is a new system with little data that I need to copy. I just want the operating system.  I have the driver disc that came with it.

  • Error 0x80070015 on clean install of windows 8.1 enterprise

    Hi, I am receiving and error 0x80070015 when trying to do a clean install of windows 8.1 enterprise evaluation on to a newly built PC.  I am installing from a USB stick to a brand new SSD running in ACHI mode.  Each time the installation reaches
    12% on the 'getting files ready for installation' I receive this error message.  The first time I tried the installation I also got an error message 0x800703ee but this has now stopped.
    Please go easy on me, I'm not an IT pro, I want to check out windows 8.1 on this new build to decide if I want to go with it or stick with Windows 7 on this and my other work PC.
    Any advice gratefully received.
    Thanks, Simon

    Hi, 
    Error code 0x80070015 usually means "device not ready" and is often seen when the USB drive or disc is having issues.
    Please re-create a bootable USB or DVD to check the results. 
    Another thing is that there might be some SATA clash on your system with the new SSD connected. Please try to enter the WinRE from your USB drive and try following commands to create new partition: 
    1. Use Diskpart command line to show the partition on your disk: 
    Run CMD as Administrator, type following command line one by one: 
    DISKPART
    List Disk
    Select Disk 0
    2. Delete the system partition (if there is, it can be about 100~200MB) and C partition, delete these 2:
    List Partition
    Select Partition 0 (I suspect that there is the system partition on this disk and it’s the partition 0)
    Delete Partition
    Select Partition 1 (I suspect that this is the C drive)
    Delete Partition
    3. Create new one.
    Create Partition Primary
    4. Try to restart system via installation disk and reinstall Windows 8 on it. 
    For detailed information about this command, you can refer to this article:
    DISKPART:
    http://technet.microsoft.com/en-us/library/cc770877(v=ws.10).aspx 
    If the issue persists, please run Check disk tool in WinRE: 
    CHKDSK /R /F
    Any error message, please post back. 
    Hope these could be helpful.

  • How to perform a clean install of Windows 8 / 8.1

    This document describes, how to perform a clean install of Windows 8.
    Windows 8 System Requirements
    1 GHz or faster processor (with PAE, NX and SSE2 support)
    1 GB RAM (32-bit) or 2 GB RAM (64-bit)
    16 GB available hard disk space (32-bit) or 20 GB (64-bit)
    DirectX 9 graphics device with WDDM 1.0 or higher driver
    Additional requirements to use certain features:
    To use touch, you need a tablet or a monitor that supports multitouch.
    To access the Windows Store and to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768.
    To snap apps, you need a screen resolution of at least 1366 x 768
    More Info: http://aps2.toshiba-tro.de/kb0/TSB2903E20000R02.htm

    I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install.  I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software.  It asks for the product key.   I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
    How id I get my single Windows license onto my new SSD HD?  Reload, clean install, ???
    How do I get the proper product key or confirm it is correct? 
    It is a new system with little data that I need to copy. I just want the operating system.  I have the driver disc that came with it.

  • I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    I need help with deactivation.
    I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
    but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • Clean install of windows 8 crashing with BSoD: "attempted execute of noexecute memory"

    I recently bought this computer (sorry for hyperlink, but it is much easier than trying to list all the components):
    http://www.newegg.com/Product/Product.aspx?Item=N82E16883227593
    I added a Samsung 840 EVO 250gb SSD to it, and then I attempted to do a clean install of windows 8.1 onto the SSD from
    the reinstall DVD that came with the system. Windows 8.1 appears to install correctly, but when the computer restarts to load windows for the first time, I get a BSoD with the error "attempted execute of noexecute memory". I tried reinstalling, but
    got the same error.
    Note that for testing purposes, I installed windows 7 on the SSD, and it works great. Unfortunately, I do not have a windows
    7 key, so this is only a temporary solution. I would like to figure out how to get windows 8.1 on the SSD and running on the my computer.
    Thank you in advance for any help or advice that you can give me.
    Here are the minidump files if helpful:
     https://drive.google.com/file/d/0B1fPQ--DwbjOV2ZuT0xoeWR6QXc/view?usp=sharing
     https://drive.google.com/file/d/0B1fPQ--DwbjOOUtrWUhfZmRMM1E/view?usp=sharing

    P
    These were Related to RTL8192cu.sys USB NDIS Driver from Realtek Semiconductor Corporation  I would remove the current driver and install the newest driver available
    Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Users\Ken\Desktop\120414-8515-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    ************* Symbol Path validation summary **************
    Response Time (ms) Location
    Deferred SRV*f:\symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*f:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 8 Kernel Version 9600 MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
    Machine Name:
    Kernel base = 0xfffff801`1981d000 PsLoadedModuleList = 0xfffff801`19ae49b0
    Debug session time: Thu Dec 4 05:16:31.298 2014 (UTC - 5:00)
    System Uptime: 0 days 0:00:12.923
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck FC, {ffffd000217aaa00, 8000000104112963, ffffd000217aa7a0, 2}
    *** WARNING: Unable to verify timestamp for rtwlanu.sys
    *** ERROR: Module load completed but symbols could not be loaded for rtwlanu.sys
    Probably caused by : rtwlanu.sys ( rtwlanu+10d69a )
    Followup: MachineOwner
    2: kd> !analyze -v
    * Bugcheck Analysis *
    ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
    An attempt was made to execute non-executable memory. The guilty driver
    is on the stack trace (and is typically the current instruction pointer).
    When possible, the guilty driver's name (Unicode string) is printed on
    the bugcheck screen and saved in KiBugCheckDriver.
    Arguments:
    Arg1: ffffd000217aaa00, Virtual address for the attempted execute.
    Arg2: 8000000104112963, PTE contents.
    Arg3: ffffd000217aa7a0, (reserved)
    Arg4: 0000000000000002, (reserved)
    Debugging Details:
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
    BUGCHECK_STR: 0xFC
    PROCESS_NAME: System
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
    TRAP_FRAME: ffffd000217aa7a0 -- (.trap 0xffffd000217aa7a0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffd000217aaa08 rbx=0000000000000000 rcx=ffffe00003734a70
    rdx=ffffd000217aa9f0 rsi=0000000000000000 rdi=0000000000000000
    rip=ffffd000217aaa00 rsp=ffffd000217aa938 rbp=ffffd000217aa9a8
    r8=ffffd000217aaa00 r9=ffffd000217aa9f8 r10=ffffd00020640000
    r11=ffffd000217aa940 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei ng nz na po nc
    ffffd000`217aaa00 0000 add byte ptr [rax],al ds:ffffd000`217aaa08=00
    Resetting default scope
    LAST_CONTROL_TRANSFER: from fffff801199c3e32 to fffff8011996d0a0
    STACK_TEXT:
    ffffd000`217aa578 fffff801`199c3e32 : 00000000`000000fc ffffd000`217aaa00 80000001`04112963 ffffd000`217aa7a0 : nt!KeBugCheckEx
    ffffd000`217aa580 fffff801`19853bc6 : 80000001`04112963 00000000`00000000 ffffd000`217aa720 00000000`00000008 : nt! ?? ::FNODOBFM::`string'+0x468a2
    ffffd000`217aa5c0 fffff801`19885ffd : 00000000`00000008 ffffe000`02759880 ffffd000`217aa7a0 ffffe000`052a0000 : nt!MiSystemFault+0xaf6
    ffffd000`217aa660 fffff801`1997732f : 00000000`00000008 ffffe000`03734a70 00000000`00000000 ffffd000`217aa7a0 : nt!MmAccessFault+0x7ed
    ffffd000`217aa7a0 ffffd000`217aaa00 : fffff800`01db969a ffffe000`03734a70 ffffe000`03000000 00000000`00000001 : nt!KiPageFault+0x12f
    ffffd000`217aa938 fffff800`01db969a : ffffe000`03734a70 ffffe000`03000000 00000000`00000001 00000000`00000000 : 0xffffd000`217aaa00
    ffffd000`217aa940 ffffe000`03734a70 : ffffe000`03000000 00000000`00000001 00000000`00000000 ffffd000`217aaa08 : rtwlanu+0x10d69a
    ffffd000`217aa948 ffffe000`03000000 : 00000000`00000001 00000000`00000000 ffffd000`217aaa08 fffff800`01ccf62e : 0xffffe000`03734a70
    ffffd000`217aa950 00000000`00000001 : 00000000`00000000 ffffd000`217aaa08 fffff800`01ccf62e 00000000`00000004 : 0xffffe000`03000000
    ffffd000`217aa958 00000000`00000000 : ffffd000`217aaa08 fffff800`01ccf62e 00000000`00000004 ffffe000`03000000 : 0x1
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    rtwlanu+10d69a
    fffff800`01db969a ?? ???
    SYMBOL_STACK_INDEX: 6
    SYMBOL_NAME: rtwlanu+10d69a
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: rtwlanu
    IMAGE_NAME: rtwlanu.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 51dd743f
    FAILURE_BUCKET_ID: 0xFC_rtwlanu+10d69a
    BUCKET_ID: 0xFC_rtwlanu+10d69a
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0xfc_rtwlanu+10d69a
    FAILURE_ID_HASH: {095bf10a-821a-1045-f529-a4601d2cff4f}
    Followup: MachineOwner
    2: kd> lmvm rtwlanu
    start end module name
    fffff800`01cac000 fffff800`01ea4000 rtwlanu T (no symbols)
    Loaded symbol image file: rtwlanu.sys
    Image path: \SystemRoot\system32\DRIVERS\rtwlanu.sys
    Image name: rtwlanu.sys
    Timestamp: Wed Jul 10 10:48:31 2013 (51DD743F)
    CheckSum: 001EE009
    ImageSize: 001F8000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Wanikiya and Dyami--Team Zigzag

  • Can I clean install a Windows 7 Pro System Builder on a Lenovo PC with Windows 8 preinstalled?

    Hi. I would like to clean install windows 7 on a Lenovo PC  that came with Windows 8 core preinstalled. I want to format the entire drive and remove windows 8 and clean install windows 7.  I already tried the clean install of Windows 7 Pro to get all of my drivers in line, and now I would like to buy a Product Key.
    Would  a Windows 7 Pro System Builder work in my case? Would it work just as smoothly as a retail version? I understand that the System Builder is an OEM version that includes the Product Key, COA, and DVD) Just want to make sure before I buy the System Builder version of Windows 7 Pro.  Thanks.
    Grazzie
    Solved!
    Go to Solution.

    that should be retail since it seemed to be used for pc upgrades either way your new system builder key should work. those are called refresh because they re-released them sincea bug was found in thier installers. Do you have any key in the computer atm? or is windows just waiting to be activated? 
    EDIT: its a good copy look here>  http://www.heidoc.net/joomla/technology-science/microsoft/14-windows-7-direct-download-links
    Should you want to use the DVD images permanently, and don't own a product key yet, you can order a Windows 7 OEM or retail version from Amazon. The OEM reinstallation versions contain a DVD with a product key just like the retail versions. They are significantly cheaper, but lack a proper box packaging, and don't include technical support by Microsoft. The OEM key will work with the Digital River downloads, so you can just pick the cheapest one. Sometimes better editions are the cheaper ones, so all of the following links to Amazon offers might be worth checking. I've already tried to find good deals for all editions and linked to them here:
    I own a Y510p SLI, and Yoga 2 Pro

  • How save factory software on T400 and reinstall after clean install of Windows 7

    Hi
    I have a Thinkpad T400  2764-CTO Running Vista Business 32-bit  and want to do a clean install to Windows 7 Pro.
    Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
    In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
    I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
    I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

    Please review the HP software and driver download page for drivers/software that are compatible with Windows 7. Also note that there is a BIOS update for Windows Vista that improves the system's ability to function with WIndows 7. Also read "Alerts" and other information regarding this product and Windows 7.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How backup/save software installed on T400 before doing clean install of Windows 7?

    Hi
    I have a Thinkpad T400  2764-CTO Running Vista Business 32-bit  and want to do a clean install to Windows 7 Pro.
    Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
    In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
    I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
    I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

    "In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?"
    As Maliha said (or implied) that doesn't work.  Just copying installed programs doesn't set up the registry entries or any data folders and files they may use in your user files.
    You might consider copying your entire user directory to large flash or DVD or external hard drive as a way to preserve your personal data and program data files.  Things like Thunderbird mail or Firefox bookmarks are in C:\users\kathleenklein\appdata\... (which may not be visible unless you make them so) and can be plugged back into your Windows 7 install.
    "I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated."
    First, have you made your factory recovery media?  That ensures that you can revert to factory Lenovo setup if you ever want to.  To give the machine to your little brother, for instance.  It will burn a pair of CDs and one or more DVDs.
    You can/should also use R&R to save a current whole-disk image to external media.  That lets you fall back to your current setup if necessary.  This is likely to be fairly large.  An external hard drive is usually required.  Use advanced R&R to set up the target and start things off.  Once you are sure that Win 7 is going to work for you, you can get rid of the saved Vista image and use the drive for your Windows 7 backups.   You do make backups...
    R&R can't (AFAIK) save your Vista user stuff and restore it to WIn 7.
    Is this a clean install using Lenovo media or is it Microsoft vanilla?  I just did a MS Vanilla 7 install.  Since the service and recovery partitions in the Lenovo Visa drive configuration will be useless in a WIn 7 install (if MS vanilla) I used the advanced option and had the Win 7 install delete all partitions and just do its thing.  It created a small boot partition and used the rest of the drive for C:
    After installing '7, install the latest TVSU and let it pull down the basic/necessary Lenovo drivers and apps.  After that you may choose to install the latest R&R.  Surprisingly, it can be used to make backups even without the Lenovo partitions present.  I've verified that by making a full image and restoring to a bare drive.
    It's handy to Install '7, do a MS update, install TVSU, do a Lenovo update, install R&R and then burn a recovery set of CDs and DVDs so you can rewind to a sort of base-usefull-initially-updated condition should that be necessary.
    As you probably already know, start here for your Lenovo Win 7 downloads: ThinkVantage Technologies Updates
    Likely more or less than you wanted - but you asked
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Clean install of Windows 8

    I am about to perform a clean install of Windows 8, however I don't want to lose my copies of Adobe Photoshop Elements 7.0 and Premiere Elements 7.0. These programs were both pre-installed on my Sony-Vaio so I don't have a media disc for them. How can I retain these programs and activate them on my updated PC?

    A clean install of Windows 8 will wipe out your other files by definition as will the recovery disks. Fortunately, Windows 8 has some new Maintenance options not seen in prior versions. You can try an OS "refresh" which will install new Windows 8 system files without disturbing your data or settings.
    http://www.pcmag.com/article2/0,2817,2410848,00.asp
    You will want to back up your important files before you do this as there is a small chance it can go awry.

  • Satellite P305-S8820 - FN key not working after clean install of Windows 7

    Hi,
    I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
    Any ideas?

    Hello John
    You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
    Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
    You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
    Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

  • [Helix gen2] Clean Install of Windows 8.1 - one unknown device left

    Hi,
    I did a clean install of win 8.1 with the suggested procedure (System Updater, Solution Center)
    Unfortunately, there is one unknown device left in the device manager:
    Intel(R) Serial IO SPI Host Controller - 9CE5
    ACPI\VFSI6101\1
    which I thought could be solved by this driver:
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-helix-series-laptops/thinkpad...
    But without success. So could anyone help? Which is the right driver? Or what should I do?
    Thx Ralf
    Moderator comment: New thread created. Subject edited to match. Was: Re: Lenovo Helix - Clean Install of Windows 8.1 - Best way to load Software and Drivers
    Solved!
    Go to Solution.

    Good day and welcome to the community.
    I found a few vague references of VFSI6101 being related to a Validity Fingerprint Sensor.
    Looking at the Helix Gen2 driver pages: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-helix-series-laptops/thinkpad...
    and specifically at the FPR software package page:
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-helix-series-laptops/thinkpad...
    there's a reference to: "Synaptics FP Sensors(WBF) VFS6101". Pretty close!
    So you might try that to see if it clears up the orphaned device.
    Hope this helps a bit.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Help with Performing a Clean Install of Windows 8.1

    Hey. I just bought a laptop today and it came with Windows 8.1. However, my issue is that my OS resides in a huge partition (900+ MB). And I don't want this. I want to re-allocate space, and take a portion from my OS's drive in order to create more partitions.
    However, to do that, I have to format the drive, which I can't 'cause it contains the OS.
    Bottom line: I don't have a CD installer for Windows 8 or Windows 8.1. I am trying to perform a clean install of Windows 8.1 in my laptop. Can I get the installer online? Can I use the product key here in my already activated Windows 8.1 OS? Do I need to
    install Windows 8 before installing Windows 8.1?
     

    you may be able to shrink the existing volume(s):
    https://technet.microsoft.com/en-us/library/cc731894(v=ws.10).aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to do a clean install of Windows?

    Is there anything I should know before doing a clean install of Windows on my laptop? It's a GS60 Ghost. I got my product key using Magical Jellybean KeyFinder, but from what I've heard I won't need that since the key is stored in the BIOS. So I guess all I need to do is put the right version of Windows on a USB and install it, right?

    The OEM DPK stored in the BIOS only activate the same type of Windows. For example, most of MSI laptops were preloaded with Windows 8.1 standard (PS: "standard" won't be shown in the "System" window) and planted with OEM DPKs for Windows 8.1 standard. If you install the Windows 8.1 Pro version, it won't be activated by the key.
    However, if your Windows 8.1 Pro is bought from the shop, you'll need to enter a key provided in the box when installing. And then it will automatically activate the OS by connecting to the Internet. In this way, the OEM DPK in the BIOS will be ignored.

Maybe you are looking for