Clean install vs. time machine recovery after installing new HDD

Hello All,
I have got actually two questions, but I think I only can do one issue at the time. Anyway: Here are my specs and question:
1. I have got a 2010 MacBook Pro with a 320 Gb HDD which seems to be on its way to lala land (crashes almost once every quarter year)
2. I have backed up my Mac with TimeMachine to uptodate
3. I have created a boot disk and purchased a new 1 Tb HDD to be installed
4. I plan to install new HDD in a bit
So here is the question:
Shall I make a clean install of Mavericks (and if so, how do I get all my e-mail and other data onto the new HDD), or should I just go with the latest TimeMachine update?
(Also: If I partitioned the HDD and designate one only for apps and the other only for data, how would I do that?)
Any pointers would be greatly appreciated. ... thanks, theo

Thank you for your swift responce and help
So this solution would remove the "clutter" and restore performace?

Similar Messages

Time Machine Recovery (after data recovery)

Several months ago, Disk2 and Disk3 in my 2007 MacPro 1,1 (OSX 10.7.5) became unreadable by the computer. To make matters worse, the Time Machine external backup became equally as unreadable. All at the same time! Drive 1, with the operating system, seems to be unaffected. The two unreadable drives showed up as "media" in disk utility, but didn't show up in Disk Warrior or any other similar programs (partition repairing) using the "terminal." I sent the Time Machine drive (WD Mybook Essential 3Tb) to DataRecovery.com and they found no phyical issues with the drive. There was, however,"Data Corruption in the file tables and data area" (according to the evaluation report). This was corrected and the TM drive was supposedly completely recovered.
Upon receiving the external drive (now replaced by a newer 3Tb Mybook), I replaced disk2 and disk3 with new 1TB drives (formatted with a single partition) and tried to perform a restore for these two drives. No such luck.....The drive was readable by the computer but would not actually enter into "Time Machine." I examined the actual drive and found an inordinate amount of Unix executable files, especially when going into the individual backups. The drive does show that they recovered 870Gb of information, but nothing seems to be readable much less recoverable.
I'm wondering if there is a workaround for any of this or whether I should contact the data recovery people to resolve this. I appreciate any help on this as it's become expensive and a bit deflating.......I still hold out some hope, though. Thanks. The drives were most likely corrupted by a generator that kicks on once a week (automatic maintenance) and temporarily cuts power long enough to turn the computer off...I've since gotten a UPS.

A general look at backup files......

Time Machine recovery on a new computer

I have an old Intel Core Duo Mac Book Pro that was running OS 10.6.8 and a newer iMac running 10.7.4. Both were being backed up using Time Machine onto a Time Capsule. My Mac Book Pro has had some serious problems and I would like to recover the back up from the MacBook Pro onto a Partition on the iMac. The MacBook Pro had a 250GB hard drive (200GB used for OSX). I partitioned the iMac to give a clean 250 GB partition. How do I recover the MacBook Pro Data onto the iMac partition?
Thanks

Pondini has some info..
http://pondini.org/TM/16.html
Read all the links ..or Q14-17 on restore.. there are a number of methods.

Unable to access time machine backups after creating new user profile

Hi,
I had visited the Genius Bar with some problems with iTunes not opening. The Genius had indicated that I likely had some corrupt files and that the easiest fix would be to create a new user profile... So we did...
After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
Please help...
Thank in advance,
Des

desbiss wrote:
After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
That's correct. What you see in Time Machine's "Star Wars" display depends on what you have the Finder window set to. While looking at the new profile, you can't see any backups that were done before it existed.
You're right, they're still there, for now, but are grayed-out in the timeline at the right, because what's in the Finder window wasn't backed-up then.
If you select your internal HD or Computer Name in the sidebar, you'll be able to see those backups.
But since they're for a different user, you won't be able to view inside that home folder or restore from it -- one user, even an Admin user, doesn't normally have access to a different user's data.
It's doubtful, but you might be able to create a new user with exactly the same name as the one you deleted, log on to it, and see if the old backups appear.

Time Machine restore after a new HD

Hello
I am thinking of replacing my 17" macbook pro internal hard drive with a SSD. The process seems strait forward but I am a bit put off by all the talk and expense of cloning my current disc. Is the following suggestion possible?
1.Back the current drive up with time machine
2. Remove the old HD and replace with a new SSD. I gather it can fit into the same space.
3. Do a repair boot of the Macbook from the internet
4. Format the new SSD
5. Restore to the new drive from Time Machine
6. Voila !!!
7....I bet its not that simple
Thank you for any response
Stephen

Thanks Andy
Good news. No, Command-R definately is functional. Its helped me out before!
Stephen

Kernel panic after time machine migration after clean install of 107.3

I had the hard drive replaced in in my mid 2009 17" MacBook pro. After the clean install of lion I migrated my data from time machine (lion) to the new clean partition.. Upon completion the machine is unresponsive. The progress wheel turning for 10 minutes. I force quit and restart to kernel panic. I have been through this 3 times same sequence of events same results. Any ideas?
Thanks in advance,
John

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Time machine freezing after fresh re-install because of recovered corrupt files

Hi,
I have a Mid 2009 15" MBP running 10.8.2. Recently, my HDD crashed. And my time machine backup on an external HDD failed to mount (perhaps the backup was also corrupt?). I made an image using Disk Drill just in case and got a new HDD from Apple Support. They put in a new HDD and "recovered" my data. Now, the comp was behaving very very funny, freezing suddenly a few minutes after boot, requiring a hard shud-down and frequent kernel panics. So, I copied some of the important data in my Users folder and did a fresh install of ML on the new HDD. I also got a new external HDD and formatted it propoerly and copied back the files onto the fresh install of ML. At this point, I realised that there were certainly some files there that were corrupt(?) because, the copying back caused hanging a couple of times. Anyway, now the comp works just fine, but as soon as I begin a time machine backup, it completely freezes (just like before requiring a hard shut down), after less than a GB backing up. Please help me.

Hate to tell you this but the 2009 model MBPs were built, assembled, with a very cheaply made HDD to Logic board cable and your original drive may be fine and the cable is the thing that is failing.
I suspect this because once a drive fails it is near impossible to get any useful data off it. So if Apple was able to copy your files from the old drive to the new one that drive is probably still OK. And that you are now still having problems with the brand new drive.
No the problems you are having can not be caused by just having corrupted files store on the drive. The only files that are accessed by the operating system, while booting and running the computer, are those operating system files and whatever programs you are running. even if a program access those corrupted files it would not cause problems with the OS but may crash the program that is opening them.
As for TM not working that again is a sign that the cable is bad because TM can't copy the files to its backup over that bad cable.

Not a valid photoshop document after time machine recovery and reinstall of photoshop

After a time machine recovery most of my photoshop documents recovered fine, however there are a select few (and my most recent work unfortuantely) that seem corrupt. It isn't all of my documents. Trying to recover them again from back-up doesn't seem to be working. I did have to reinstall photoshop CS4 after the recovery.
I have seen similar questions on here but none of the solutions have worked. I've tried opening with other programs, I've tried changing the file extentions etc. If the files were just corrupt recovering them from time machine should fix the problem. Many thanks if you can assist.

SaveChaos wrote:
…but it doesn't feel like corrupt files are the problem…
If it's only a few selected files that are misbehaving but others do open without problems, then you do have file corruption in each of those files.
Go back in time machine to the earliest possible date after each file was created and restore only that particular version of the file.
If that doesn't work, then considered the files irretrievably lost. What kind of error message do they return when you try to open them?
In any event, it's imperative that you check the SMART status of your drive and Repair Drive (or at least Verify Drive) to check for a failing drive.
As an aside, taking a belt-and-suspender approach, it's my practice to supplement Time Machine with a clone of my working drive and daily backups of my files. For some reason, I've had three Time Machine disks fail on three different Macs and locations in the last six months or so.
I had Time Machine disabled on all my Macs until I decided to give it one more test run on a 65-lb Mac Pro recently. I'm not convinced one way or another yet, so all other Macs still have TM disabled for now. Time Machine is very intrusive, and the external TM drives run much, much hotter than external storage files—always a troubling sign in my book.

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
Also, if you want to have dual backups, see -->>
http://pondini.org/TM/27.html.
I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
It should work well for you.
Clinton

IMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

iMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?

You are in the typical catch22.. you cannot use the TC without setting it up.. you cannot set it up without Lion.. so you can install the latest utility.
Do you have any reasonably current iOS devices.. they can run the iOS version of the utility.. that will allow you to set up the TC.
Or invite a friend with a laptop running at least Lion
Or take the TC back and get a plain USB hard drive and backup to that.

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Time Machine problem after 10.6 upgrade

Hi Guys,
After I installed the snow leopard, I got a prompt regarding the time machine: "cancel backup" "create new backup" "replace backup". I clicked on "create new backup" but that seemed to have been the wrong choice. The time machine said that the last backup was November 28 2008, despite me backing up data every hour since November 28. My question is:
Have I lost all the data between now and Nov. 2008? Is there anyway to access it?
Second, can I resume backing up as before instead of the new back up I accidentally created?
Thanks.

valoo wrote:
I deleted the newly created sparsebundle. I also realized that the computer name had been changed and I changed it back to the original one. Here's the new problem. The TM says that I only have 127 GB and the amount of space needed to back up the disk is 140GB. I don't understand. It almost seems like it is trying to duplicate the entire backup. And this time around, I don't even see any new sparsebundle. I am stuck here.
Something caused TM to decide to start a new "sequence" of backups, as if you'd gotten a new Mac. That means a new, full backup to start with. The only thing that seems to have worked for some folks is a Restart. So if you haven't done one since the latest changes and failed backup attempt, it's worth a try.
If it still wants to do a full backup, you can't prevent it.
Depending on how much space you have on the TM drive/partition, your only choice may be to delete the "old" sparse bundle and let TM start over.
You may be able to delete some of the older backups to make room for the new, full backup, but that's tedious and time-consuming (see item #12 of the Frequently Asked Questions *User Tip.)*
But that still leaves two problems: you'll have to manually "compact" the sparse bundle via Terminal to shrink it; and you'll have to continue to delete old backups this way (and manually compact them) to make room for new ones. Since TM is treating them as if they were from a different Mac, it won't delete them automatically, but will delete the oldest backups from the new set instead.

Time Machine Backups after recent upgrade to Mountain Lion

Basically to keep a long story short - i need to take my computer in for repair tomorrow. I recently did an upgrade to Mountain Lion a day or two ago. I haven't done a Time Machine backup until today (a couple days after i upgraded to Mountain Lion) because i wanted to make sure that my previous TM backup (Snow Leopard 10.6.8) was the most up to date and best update that i could revert back to if i had any issues with Mountain Lion, or any application compatibility, etc etc.
I don't have any broken applications and it seems like Mountain Lion is running better than Snow Leopard. However, as i said - i'm taking my computer in for repair tomorrow, i would like to know that i have the most up to date Time Machine backup with the new Mountain Lion so that when i restore it back from my Time Machine backup after i get it back from repair, i won't have any issues with the migration, which could potentially lead me into more technicalities.
I have a 500GB Harddrive, with about 70GB left of free space....I did the initial backup prior to upgrading to Mountain Lion, and it upgraded 400+GB of info, now, since Mountain Lion - the first backup with Mountain Lion initially said 46GB - then it went down to 14GB by the time it was all said and done....so what exactly did it back up?
Did it back up all the necessary files to keep Mountain Lion running smoothly when i restore it back to the way it was after i get it back? Did it not back everything up that it needs to? Is it safe to erase my internal drive and do a clean installation so i can take it in, and not worry about not being able to migrate things back over or applications not working correctly?
When i get it back, i presume it will come with Mountain Lion back on it and i can just boot up into the Recovery Disk and restore it from a Time Machine backup that way, correct?
Thanks for the help.
- Jason

I received the same error and experienced the same issue that you have described but after performing a Time Capsule soft reset and then toggling the TM Off and then back On I was able issue a backup now and see my previous backups.
Here is the link to where I posted my fix; https://discussions.apple.com/message/19069543#19069543. Someone else had success using a different method. The only comment / complaint that I have since the ML OS X upgrade is that TM now takes at least 20 to 30 seconds before I can click/select a backup.
I hope this helps.

Time machine backup after HD crashed

Hi, my HD on my MacBook crashed and i had it replaced which is fine, the OS (10.5) was reloaded as well. My question is what is the best way to restore from Time Machine to my previous system.
Before the HD crashed certain programs (word, safari and handbrake mainly) were causing major spikes in Processes and causing the fans to spin at over 6000rpm. I was concerened that this may be caused by corrupt system files, preference files or caches. I ask because if corrupt files were the problem, will restoring from Time Machine re install these corrupt files and again cause problems?
What would be the best way to restore from Time Machine in this case?
Any help would be great!

Ok, however i cant access the thread link that you posted? it says i dont have rights to access the thread? no idea why. Is there another link to the page at all?
Sorry, I forgot you might not be able to access it.
Just to clarify do you mean to archive and install from the Time Machine drive? That is where i am confused because the OS was erased an installed the apple store so its all new now?
Ahhh, you never explained that clearly earlier. All this time I thought you hadn't done anything yet to the system. So you already have the Mac OS re-installed, you just don't have your user data yet?
Then in that case forget the Archive & Install. You need to now use Migration Assistant to move your User data over form the Time Machine backup. Have you already launch the Mac OS and created an new account, or have you NOT started the Mac yet? It makes a difference what you do below.
*Using Time Machine Before Initial Launch of New Mac*
Before starting the new Mac for the first time, attach the hard disk that contains the Time Machine backups from the old Mac. (For Time Capsule/AirDisk users: If you will be attempting this wirelessly, ensure that you are in range of your Airport wireless device. Alternatively, for faster migration of large quantities of data, connect your Mac via ethernet to your wireless device.)
Procedure:
Startup the new Mac and begin the setup process. You will initially see the video introduction.
At “Welcome” select your country and then preferred keyboard.
At “Do You Already Own a Mac?” you are asked “Would you like to transfer your information?”
+from another Mac+
+from another volume on this Mac+
+from a Time Machine backup+
+Do not transfer my information now+
Select “from a Time Machine backup” and click “Continue”.
At “Select a Backup Volume” choose your Time Machine backup disk and click “Continue”. (If you are attempting the migration wirelessly, then click “Join...” and select your network first.)
At “Transfer Your Information” check all the categories you wish to migrate over. If you wish your Mac to be in the same state as your last backup, then check everything. If, however, you are only interested in transferring one user account, then click the little disclosure triangle next to "Users". A list of all the previous users will appear. Just uncheck the user accounts you do NOT wish to migrate over. In other words, have only the desired account checked.
Give the installer time to calculate sizes.
Once that is complete, the “Transfer” button will become active and you can click it.
After the migration, verify the registration information, click “Connect” and you are done.
Once the migration is complete use Disk Utility to repair any permissions issues.
*Using Time Machine After Initial Launch of New Mac*
If you happened to initially set up the new Mac using a different username than the username on the account you wish to migrate, then skip to “Attach the hard disk containing...”.
If, on the other hand, it is the same username as the account you wish to migrate over, then do the following:
Go to System Preferences --> Accounts.
You may need to unlock the lock in the lower left to make changes.
Below the pane on the left click "+" and create a brand new Administrator User account on the Mac with a completely unique name - not the name of your own User account.
Now logout of the account you are currently in and log back in using the new Admin account you just created.
Attach the hard disk containing the previous Macs' Time Machine backups to the new computer. (For Time Capsule/AirDisk users migration will be much faster if you connect your Mac directly to the router via ethernet. [See “Wirelessly or Directly Connected” above])
Now go to Applications --> Utilities --> and launch Migration Assistant.
At the welcome dialogue click "Continue." You may be required to enter your Admin password.
For Migration Method chose "From a Time Machine backup or other disk". (Do not choose…
"Full System Restore" unless it is exactly the same Mac you are restoring to.)
At “Select the System to Transfer” choose the hard disk containing the previous Time Machine backups and click “Continue”. Give Migration Assistant some time as it connects to the drive and scans the disk for eligible data to migrate.
At “Select User Accounts to Transfer” put a check beside each account you would like migrate over to the new Mac.
At “Select the Items to Transfer” you can choose to migrate “Applications” over. If an application already resides on your new Mac, only the newest version will be transferred. Additionally, other “Files and Folders” that resided at the top level of your old Mac can be transferred at this point as well. Files from the “Library” folder of your old Mac will always be transferred over unless you uncheck the other two options.
Click “Continue”.
At “Select Computer Settings to Transfer” choose which settings you would prefer transferring to the new Mac. If you want a completely fresh system to start with, then do not check any of these options. This can be helpful if your previous system was experiencing issues.
Click “Transfer”.
If you have already created a User Account on the new Mac and it happens to be named the same as the User Account that is being migrated then Migration Assistant will report,
+"There is an existing user account with the same name as an account you are transferring."+
At that point, you will be able to choose one of the following:
+• Rename the user account you are transferring+
+• Replace the existing user account with the one you're transferring+
+• Do not transfer this user account+
If you wish the new Mac environment to be exactly the same as your old Mac, then avoid selecting “Rename the user account...”. Rather, select “Replace the existing user account...”. It will not be deleted but saved in a new folder labeled “Deleted Users” found in the main Users folder. Click “Next”.
At this point the transfer will begin with a bar displaying the progress. Once completed click “Quit”.
*Full Backup After Migration to New Mac*
Bear in mind that in all cases Time Machine will not continue to backup the previous Macs’ backup sets but will perform a new full backup. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select the previous Mac’s backup set. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
Let us know if this was helpful.
Cheers!
Message was edited by: Glenn Carter

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Clean install vs. time machine recovery after installing new HDD

Similar Messages

Maybe you are looking for