CLEAN ML INSTALL - BOUGHT APPS
If i do clean install of mountain lion, will i have to buy my apps again? or i I'll be able to download them again for free with my account.
apps such as Book Reader, FLAC Tunes...
thank you!
Redownloads from the Mac App Store are free.
(71248)
Similar Messages
-
Wipe PlayBook, re-register with another ID, install bought app?
Hi,
I want to make calls from my z10 to my playbook. I used one blackberry ID to register them both. Unfortunately this makes it impossible to make calls from the Z10 to the PlayBook. Therefore I need to wipe on of these.
My question is:
If I wipe my PlayBook and register ist with another ID will I be able to reinstall all the apps without buying them again?
Thank
lrrm
My App: Peg Solitaire
Need a designer? Drop me a line
Solved!
Go to Solution.lrrm wrote:
My question is:
If I wipe my PlayBook and register ist with another ID will I be able to reinstall all the apps without buying them again?
No. A new BlackBerryID will not give you access to previously purchased apps.
If the Z10 is brand new and you have not purchased any (or as many) apps on the Z10, you might consider wipign the Z10 and logging in with a new BBID on the Z10.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Clean install of Apps in Leopard
I know I am probably missing something here, but here is what I think I want to do, just not sure how...
My goal:
Just received new Mac Pro Dual 2.8 (early 2008).
It has Leopard installed on an included 320-Gig Hard Drive.
I have a WD 750-Gig Hard Drive that I want to install and make the boot drive (replacing the 320).
I want to install fresh copies of all my (many) applications on this new system.
My questions:
1. What is the best way to install Leopard to this new empty WD 750-Gig drive? Boot from install CD's after pulling the 320 out?
2. How to I go about installing Commercial software into Leopard when all I have are either CDs before Leopard was released (like Adobe CS3 apps) or pre-Leopard downloads? (i.e. in the case of CS3 will the pre-Leopard installer install the CS3 software and then allow me to update all those apps on the new system via the Internet, or do I need new Leopard installers? I haven't seen any? I see lots of Leopard "updates" that I have run on my old computer still in Tiger OS, but how do I do a Clean Install of apps on the new machine where I have to start over from scratch?)
Message was edited by: ChoreoGraphics
Message was edited by: ChoreoGraphicsI am in a similar situation as the original poster.
I believe the answer is that yes, it makes sense to put the new drive in an empty bay, do a clean install of Leopard onto it, then try to boot to it once the install is up and running. Once the install is complete, it should start the Migration Assistant in which you may be able to bring your old apps and settings from the drive in bay #1 (or Time Machine).
If you have the time, it probably is worth it to do a fresh install of your third-party apps. I do not look forward to the hours it takes to install Final Cut Studio, but again -- it makes good sense and is required to be installed on the boot drive.
As for the question about compatibility. Other than programs that are PowerPC based (Universal Binary), you should be fine with the Migration assistant and then a simple "Software Update" after a successful reboot. This worked when the Mac Genius migrated my drive from my G5 Quad-Core to my Mac Pro. They did not go through and update my third-party apps, but it did not take long to track down the Intel-based downloads when necessary. For example, I run ArchiCAD and it is a different install for Intel-based Macs. The PowerPC edition was still migrated over and this is one reason I look forward to a fresh install on the new 1TB drive.
As soon as I finish a couple video projects, I will be performing the surgery.
If any of the gurus here have first-hand experience that puts my plan to shame, please speak up!
Thank You,
Deward in Denver -
I bought a new ipad air but when i install the apps , all of them are gone , but i app store still are and says you can open it. But it can not open.
The apps available to you are dependent on your location. If you are not in the USA, then you cannot get the USA app store. Whilst you may think that is unfair, it has been a part of the stardard terms and conditions you agreed to when you setup the iOS device in question originally, as well as every time you click agree to the terms and conditions.
This is done because of two things, firstly there are many legal and semi-legal reasons that an iOS app store download is available in one territory and not another, in addition to this, it also allows apple to provide language specific content, as well as team up with companies and organisations within individual organisations in order to provide you with exclusive offers, content, and information, which it would not otherwise be able to do.
Rules for the iOS app store are also applied in varing forms for the music store, the books store, and the iTunes U content library.
I can very much understand your fustraition, as someone who spent a considerable portion of his life, especially during the years he grew up, living in California, USA, but now living in London, UK, I too find it very fustraiting that you cannot always get the same content from one country to another, especially when most marketing for iOS apps originates in the USA these days.
I hope this helps your query and helps to ease your fustraition. If you would like apple to be aware of your fustraition, rather than putting it onto a pubilc form which is on monitored in a very limited capacity, then you can fill in the form at http://www.apple.com/feedback where you can give your complaint straight to apple. -
How do you re-install an app you bought on a new drive?
Just bought my first app on the App Store (Pixalmator). Pretty cool. It drops the app on your doc and it looks like when you buy or update an app on your iPhone (little progress bar under it as it downloads). In the past, most application I purchase on-line come in a .dmg file. I can then store that off and back it up. If I ever need to re-install the app, I have it installer. Now, I don't really have an installer, just the app. How do we back it up and re-install it in the future? Like if I get a new mac or replace the hard drive, etc.?
ThanksYou just do it through the App store. When you are logged into the app store you can just reinstall it on that computer without paying for it. That's how it works by design. Alternatively because of that you can install that purchased app on all of your computers. Now the catch is when there is a FULL PAID UPGRADE you would then have to purchase it all over again. But for right now you should be able to log into the app store and just redownload/install it
-
Hello, well the other day i bought Angry birds with an Add " mighty eagle", and i had to reset my iphone and when i re-install the app Angry birds i dont have the add and i dont know how to get it back some1 can help me!?
Se if this helps:
iTunes Store: About In-App Purchases
Do you have a backup to restore from that would have included that in-app purchase? -
i have just bought and iMac and it was a display model but I'm trying to install iWork apps and its asking me to buy them. Any suggestions please
If it didn't start up with the Startup Assistant, did you erase the drive and reinstall the OS prior to starting this?
That is the best way to start given that it was a display model.
The free apps are tied to the Mac. If the store downloaded the apps from the App Store, you won't be able to do the same. You might want to contact App Store support: http://www.apple.com/support/mac/app-store/ -
bought apps from apps store,my money was taken and den I downloaded the apps buh 2 didn't work .it told me iTunes failed to install app,the apps are the dark knight rises(batman) and asphalt 7 I need help plss am using iPad 2
Although iTune terms says that all sales are final. You can try explaining to get a refund.
http://www.apple.com/support/itunes/contact/ -
If i reformat my macbook pro, will i still install the apps i bought without paying again?
f i reformat my macbook pro, will i still install the apps i bought without paying again?
If you got them from the Mac App Store or have installation disks for them, yes.
(58857) -
Recovering iLife apps from a clean and install
i recently installed 10.4 with a clean and install and lost iMovie, iPhoto, etc. and cannot get them back without re-installing 10.3...is there any way to recover those applications from the install disk without reinstalling the original OS?
Thanks.cmccuaig,
Just insert the Software Install and Restore Installer disk which came with your computer, and click on the Install Applications...package.From....Read Before You Install :
To install Classic Support or the applications that came with your computer
1) Insert the Software Install and Restore DVD that came with your computer.
2) Double-click the Install Applications & Classic Support icon.
3) Follow the onscreen instructions.
Note: iCal, iPhoto, iTunes, iChat, and iMovie are part of Mac OS X. To install them, you must follow the instructions for installing Mac OS X.;~) -
Which APP is most appropriate to be used immediately after a fresh clean Windows install?
Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
I know to install the required drivers for my notebook computer, I will need to use the HP Recovery Manager; which will install the original software and hardware drivers that first came with my notebook. To do this, please follow this document on Using Recovery Manager to Restore Software and Drivers (Windows 7), as well as (Windows 8 and 8.1).
To update the drivers on my computer to the latest software, I recommend following this document on Using HP Support Assistant (Windows 7) as well as (Windows 8 and 8.1).
However,
First: my primary goal is to know which HP tool is most appropriate for locating, obtaining, and installing all appropriate drivers, updates, etc. immediately after a clean new Windows 7 or 8.1 installation.
I know that HP support assistant helps to download the updates for existing sotware, and drivers. However, if I made a fresh installation of widows, there wouldn't be existing drivers or software, then Which one is most appropriate to be used immediately after a fresh new clean Windows install?? -- to determine, retrieve, and install all the appropriate drivers??
Second: How to save/transfer/export/move the Drivers and Application built-in HP Recovery Manager onto a HDD Or a disc(DVD/CD). So, in case I have delted the HP Recovery Manager, and installed a new Windows 7 installation, then I would be using these Drivers and Applications saved on a HDD or Disc to retrieve, and install all the appropriate dirvers and applications?
Finally: All rivers and Application built-in HP Recovery Manager are saved as NON-SoftPaq on a folder called SwSetup. So could I download all rivers and Application built-in HP Recovery Manager as a SoftPaq.How are you starting X? That shows that X started successfully, but the program that controls X, generally your desktop environment exited.
If you are using startx or Xinit, please post your ~/.xinitrc file -
Mid-2010 27" iMac very slow, even after clean OS install - HELP!
Good afternoon guys, I'm hoping someone can offer me some advice.
I bought my Mid-2010 27" iMac in May-ish 2011. Everything was brilliant, I couldn't believe the ease of use, and especially the start up speed, coming from a world of PCs. My iMac was used almost every day, for web browsing, photo editing, etc.
Maybe about April / May this year it started becoming very slow, slow to boot, slow to respond to mouse clicks, slow to do anything. Since I'd used about 750GB of my HDD (mainly photos), I decided I would archive some and hope that would ease the congestion. As my photos were stored in Aperture, it took about 3 days to export them all to my external HDD, 3 days of the iMac only getting so far, switching itself off, then me finally getting it to come back on (I was getting messages about Kernals, etc. now and again through boot too) - it finally backed up my photos I have from my daughters first year.
Great news, but I still had probably 400GB / 500GB of photos from her second year and any other photos I'd taken. I found the root of my Aperture directory, and managed to pull these images off, so everything is now backed up.
I decided I should try and clean install, and managed to get the HDD to boot and choose the option to re-install from Apple's Servers. All installed OK, and we're good to go! Fired up the iMac, and although it's fractionally quicker to respond, and a lot more stable, it's not quite right. And I've lost all my iLife Apps which originally came with the iMac.
Does this sound like a HDD issue? As I say, it was on quite a lot through the backup procedure, and I had set it (maybe stupidly looking back now) to never sleep, and for the monitor to only switch off after 3 hours. Or does it sound like something more is wrong with it?
I am quite confident of working with PCs, so would manage to replace the HDD I think, looking at some videos, etc. online. I did upgrade the RAM to 16GB, and that was simple enough. My question is, when you replace the HDD, how does it know where to look to the Apple Servers for the clean OS install? Or do I have to do something to let it know where to look first? I have to point out I don't have any Time Machine backup, etc. as the iMac was just not stable enough to get this in place - and up until that point, again probably stupid now looking back, I had never bothered to set up.
Any help / advice on this matter would be greatly appreciated. At the moment I have totally fallen out of love with the iMac, for something to cost £1,500+ and only last 3 years, where my last build PC lasted Approx 8 years for half the price, is very disappointing.
Thanks in advance,
ColJust suggesting things right off the bat here-
To me it sounds as though the HDD is failing, if your iMac shipped with a Seagate drive try entering your serial number to see if Apple will replace it:http://www.apple.com/au/support/imac-harddrive/
Or try running Apple Hardware Test a few times back to see if it is a hardware error.
As for the iLife apps they should've come on one of the install discs that shipped with your mac.
If your iMac is ineligible for the program above I would consider replacing it yourself with either an SSD or HDD, as for recognising apples servers for download, you will need the original install discs that came with your computer or if you haven't already it will need a firmware update to enable internet recovery
See here:Computers that can be upgraded to use OS X Internet Recovery
Good Luck! -
Install of apps 11.5.8 on Windows - Problems with PreReqs
Hello all,
I've worked with Oracle database server for years,
and installed it many times. I want to learn Oracle apps,
and I'm attempting the install of 11.5.8 on Windows
from the CDs. But I'm having some problems with the
pre requisites.
Unlike LInux, if the install doesn't work, you can't
clean out all traces of the install. I've completely
reinstalled Windows to start fresh this last time.
Although, with the pre req warnings, I didn't attempt
the install.
Here is what I did.
Copy the CDs.
Rapidwiz
install Oracle apps
Single Node
TEST. Fresh database.
Component apps licensing
Choose all of:
Marketing
Sales
Order Management
Financials
no particular country
WE8ISO8859P1 - Western European
- for database, and appl_top character set.
The computer name is called Green.
C:\OAppsInstall\redCD\Disk1\rapidwiz>ping green
Pinging green [127.0.0.1] with 32 bytes of data:
Set
appl_top
c:\oapps11\testappl
common_top
c:\oapps11\testcomm
etc.
NTUSER: oracleapps
pw: ???
DNS Domain Name: green
These next directories are default, but do not exist:
MKS Directory C:\mksnt
MSDEV Directory C:\VC98
External JDK C:\java\jdk1.3.1
OUI Inventory Path c:\Program Files\Oracle\Inventory
It does a port availability check.
- the ports are all fine.
And checks the pre-requisites.
These three have problems:
Host/Domain Check
running command : ping -n 1 localhost
Pinging green [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
running command : ping -n 1 localhost.green
Ping request could not find host localhost.green. Please check the name and try again.
Error - host.domain ping has returned an error: 1
System variable PATH set to:
.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
System Utilities Check
running command : cmd.exe /c C:\OAppsInstall\redCD\Disk1\rapidwiz\bin\checkutil.cmd C:\mksnt C:\VC98
C:\OAppsInstall\redCD\Disk1\rapidwiz>echo off
'which' command is not available. Check MKS installation.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has returned an error: 1
JDK Availability Check
running command : CheckerClass.JDKCheck()
JDK Directory Does not exist, Input was - C:\java\jdk1.3.1
Error - JDK Availability Test has returned an error: 1
I check the PDF install doc:
Step 2: Install Latest Java Development Kit (JDK)This release of Oracle Applications requires Java Development Kit (JDK) 1.3 or
higher. Before you begin your installation, download and install the latest version of
JDK on your concurrent server, administration server, forms server, and web server.
Download JDK 1.3 from the download site for the operating system where you will
deploy the Oracle HTTP server. See OracleMetaLink document 130091.1 (Upgrading
to JDK 1.3 with Oracle Applications 11i) for a list of the sites.
1. Follow the installation instructions provided with the download.
2. Make a note of the location where you install JDK. The Rapid Install wizard
asks for this location on the Derived Settings screen. (See Step 8 on page 2-14 or
Step 9 on page 3-16.)
MSDEV Directory (Windows)
Location of the Visual C/C++ executables and .DLL files. Used for linking application executables or .DLLs.
MKS Directory (Windows) MKS tools must be added in the PATH so that executables can be used to
relink application executables and .DLLs.Finally the Questions:
I've been looking at other threads.
Oracle E-Business Suite R12 Installation Steps on Windows XP
1)
For this older 11.5.8 version, do I need to install the JDK, or will
this be done for me? If I do need to install the JDK, can I use the
latest version??
2)
Do I really need to install MS Visual C++ ?????
If so, could I use the latest .NET express instead??
3)
What is the MKS? The one thing the docs say is:
MKS Directory (Windows) MKS tools must be added in the PATH so that executables can be used to
relink application executables and .DLLs.Do I just need to create an "MKS" directory, and add it to the path?
Or, do I need to install some other software??
I've tried installing this a few times over the past few years, and
while I've had different levels of success, I've always had some kind
of issue after the install was done.
I really want to learn form and reports, so I hope that you guys
can help me out on this so I finally get a clean install.
Thanks a lot!Thanks.
Ok, I bought VC++ and installed it.
And, installed: j2sdk1.4.2_10
I could:
C:\> copy gawk.exe awk.exe (answer yes to copy over existing file)
C:\> copy grep.exe egrep.exe
However, I couldn't:
C:\> copy make.exe gnumake.exe
C:\> copy gcc.exe cc.exe
- because there are no such files in cygwin.
$ pwd
/usr
$ find . -type f 2>/dev/null | grep -i gcc
- nothing
$ apropos make
indxbib (1) - make inverted index for bibliographic databases
ln (1) - make links between files
makeinfo (1) - translate Texinfo documents
makewhatis (8) - Create the whatis database
mkdir (1) - make directories
mkfifo (1) - make FIFOs (named pipes)
mknod (1) - make block or character special files
mktemp (1) - make temporary filename (unique)
OracleApps@green /usr
$ find . -type f 2>/dev/null | grep -i make
./bin/makeinfo.exe
./sbin/makewhatis
./share/groff/1.18.1/font/devdvi/generate/Makefile
./share/groff/1.18.1/font/devlj4/generate/Makefile
./share/groff/1.18.1/font/devps/generate/Makefile
./share/man/el/man8/makewhatis.8
./share/man/it/man8/makewhatis.8
./share/man/man1/makeinfo.1
./share/man/man8/makewhatis.8
./share/man/ro/man8/makewhatis.8
System Utilities Check
running command : cmd.exe /c C:\OAppsInstall\redCD\Disk1\rapidwiz\bin\checkutil.cmd C:\cygwin\bin "C:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin"
C:\OAppsInstall\redCD\Disk1\rapidwiz>echo off
'which' command is available.
'gnumake' is not available.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has returned an error: 1
Where do I get gcc and make from??
Thanks a lot! -
Hi,
I've been using the new Adobe Creative Cloud 2014 for a couple weeks now perfectly fine, until yesterday. I use Photoshop, Illustrator, and After Effects quite extensively. This morning, I opened the Adobe CC app and all but Adobe Acrobat Pro show installed. The other already installed apps have buttons to "install" but clicking this button shows the "Exit Code: 7 - Unable to complete Silent workflow" error in the logs. Ive tried disabling my Sophos antivirus program and restarted several times. The already installed applications themselves seem to function normally, they open and work projects. I've even tried to uninstall one of the already installed programs (Bridge) and it fails to uninstall, saying I need to restart my computer and disengage my anti-virus, which I've done. I've uninstalled and reinstalled the Adobe CC app as well, and have the same result. Help.So I've completed the solutions listed in the help article with no changes. Here is how it has gone with each solution listed in the article. Also, it is not clear in the article whether these steps are to be done in sequence or may solve the problem individually, but since Solution 1 fails for me, doing them in sequence was impossible.
Solution 1: Mac OS: Run the uninstaller in the Applications/Utilities/Adobe Installers folder to remove the program listed as up-to-date.
This does not work because uninstalling any of these applications does not work. As I stated in the post, the uninstaller for all of my adobe applications (photoshop, bridge, indesign etc) throws the same error each time saying I need to: restart my computer (done) close all applications (done) and disable my antivirus (done, which was fully engaged when I installed the apps originally with no issue) and disable my firewall (done, I don't use one). Not sure what I'm missing on that, plus its a real bummer that I need to reinstall all of my CC apps even if the uninstaller did work because my creative cloud app won't recoginize they've been installed.
Solution 2: Remove the OPM.db file and relogin into the Creative Cloud desktop application using the Adobe ID tied to your subscription.
This did nothing.
Solution 3: Download and install the latest version of Adobe Creative Cloud desktop app from Creative Cloud for desktop.
This did nothing.
Solution 4: See the steps listed in Solution 1 to remove all installed Adobe Creative software. Once all Adobe Creative software has been removed, use the CS Cleaner Tool to ensure a complete removal. You can find details in Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6.
This did not do much because I can't uninstall the software to begin with.
What am I missing? -
Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now. This has been going on since April and May and its driving me crazy! And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems. I have read so many how to fix this error code but nothing works! :-( I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes. And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code? And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.
Maybe you are looking for
-
Purchased Adobe ExportPDF, Annual on 22 Feb 2014, but it does not satisfay. Want to cancel it. How?
Purchased Adobe ExportPDF, annual, on 22 Feb 2014 and tried to use it, converting PDF file to Word, but it did not work satisfactorily. So I would like to cancel it. How can I do it?
-
Crashes when printing from InDesign CS3
It used to be that when I tried to print in InDesignCS3 in my MAC 10.7.5; I would go to: Crash printing | Illustrator, InDesign | CS3, CS4 | Mac OS 10.7 the I was told to just delete the following files: [Hard Drive]/Library/Printers/PPDs/contents/R
-
After upgrading to OS 10.6.8, I cannot open Mail. I tried SecUpd2012-004.dmg which does not help.
I tried SecUpd2012-004.dmg which does not help. If anyone has a solution, much appreciated.
-
[Studio8] : Comment afficher les caractères accentués de données XML ?
Bonjour, Dans Flash, j'affiche dans mes pages des données extraites d'un fichier XML. Les caractères accentués ne sont pas correctement affichés. Quelqu'un a t il la solution ? Merci
-
Can I use my iPod, which has always been used on a PC, with my Mac?
Our PC is finally on its last leg, and I was wondering if I could my iPod with my Mac without damaging it. We're getting rid of the PC rather soon, so I'd appreciate an answer as quickly as possible. Thank you!