Clean space in hard drive does not work & storage ammount changes

Hi. I am running Mac OS X Lion 10.7.3 (11D50d). I got the message that my Start Disk is full. I have deleted almost 7G and I have cleaned the trash. But the storage says that I have just 600 Mg free and sometimes says even 30 Mg, now says 67 Mg ¿?¿?...
I am not able to make software update.
Any ideas of what is happening.
Mail seems to work strange too. When I delete some files they actually stay there.
Thank you!

KeanuReeves wrote:
From what I have read about the usb installer, it is not intended for you to try booting from the stick after wiping your hard drive. You are to click on the installer
You may be correct, but this statement is quite confusing in that context:
Important Note
When you install OS X Lion using the USB thumb drive, you will not be able to reinstall OS X Lion from Lion Recovery. You will need to use the USB thumb drive to reinstall OS X Lion.
So, if the Thumb drive is supposed to take the part of the Recovery partition, it seems that it should be able to boot. However, the license agreement still requires an Apple computer running Snow Leopard, so maybe it isn't bootable.

Similar Messages

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine. Are there any solution available?

I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?

Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

External hard drive does not work

I bought an external USB hard drive. At first, it worked. I could see an icon on my desktop and could load some stuff onto it.
Then I unplugged it (probably the wrong way, I just unplugged it) and when I replugged it, I could not see the icon anymore and when I go into the system specification/USB specs, I cannot see anything plugged in the port.
When I plug the drive in my old iMac, it work. I can see the icon AND the stuff that was previously loaded on the drive.
What should I do?
Thanks
iBook G4 Mac OS X (10.4.7)

The case's chipset(s) probably limit the size of drive/partition it can use.
If you need a larger drive than the case originally held, you probably need
to get a newer external drive enclosure that supports a newer/larger drive
of the type and kind you need.
As to the other issue ahead of this; if the hard drive in use is not discon-
nected properly, damages can result and you may need to use disk repair
tools or utilities to see if they can find the drive or fault behind this issue
and repair it. Maybe diskwarrior; or perhaps even the disk utility in the OSX
version the problem happened to occur. If there is a bad sector or startup
section in the suspect drive, it may be possible to find the drive using a
utility and see if it can be fixed; or it may need to be reformatted.
Pulling the plug on an attached drive is a bad idea; you need to drag the
icon of the external drive to the Trash, or use the finder's eject feature
to unmount these drives. They are not randomly hot swappable.

Finder & Dock do not work - Mac Hard Drive does not appear on Desktop

Until yesterday, my powerbook was working properly.
This morning, I wanted to use it and I had the following problems after login.
1/ My Mac Hard drive does not appear on my dekstop
2/ My dock appears but no icon works when I click on them. So, I can't open finder. I have no response.
3/ Furthermore, my top bar (with clock, login name, Airport icon...) appears but it is frozed.
I try several solutions as :
- rebooting in safe mode,
- rebooting, with in the same time, hold different keys (option, apple, p & R)...
As of today, no solution works.
Thanks for your help.

A.CHAMP wrote:
Nota: if i used my daugther login (she is not admin), I have the same issues.
Ok, that's good enough. You may be able to repair this with the 10.5.8 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
EDIT:
I have around 5 Go space left on my Mac
Also, your getting very low on disk space. Try to copy some of the data off to other media. *Do it before you try applying the combo, you'll need the space.*
-mj
Message was edited by: macjack
Message was edited by: macjack

My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive

My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive. The hard drive has been in service for almost two years performing this function with no sign of failure. How do I adjust time machine perameters?

The only way to limit the size of the backup is to exclude data from the backup, which you can do in Time Machine preferences.
If you use multiple browsers, have you tried clearing your browser caches? However, that's just a stop gap if it works. You either need to limit what you backup or get another drive.

Hard Drive does not have enough space/error message

Hello: I am new to Mac but have been having trouble with my iMac for a while. I can no longer download my software updates. I have an error message that states "Your hard drive does not have enough space" - 5.7 GB is required.
I only have a 1 GB machine. What am I doing wrong?
When I go to my Macintosh HD icon on the desktop, it says at the bottom of that window that I have 495.9 MB available.
The error message tells me to go to the Startup file to delete items. I go there, but there's only two files. I do have music/photos/but I do not understand what's going on with my computer.
In addition, it turns itself off often, for no apparent reason. Any ideas?
Thanks!
J.Renee

The error refers to space on your hard drive, not memory. Unless you've mis-typed, if you have only 495.9 MBs free on your hard drive then you are definitely out of space. If you continue operating with so little free space you are risking a catastrophic loss of data.
To free up space you will either need to delete unneeded personal files or copy some of your bigger files off to an external hard drive then delete them from your internal drive. Alternatively you can replace the internal drive with a larger drive.
You should maintain no less than 15 GBs or 15% of the hard drive's capacity as free space whichever is greater.
If you meant to type 495.9 GBs then you may have a corrupted disk directory. Try the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

X102e - Hard drive does not boot into Windows

Hi, I was trying to reinstall Windows on my X120e.
I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Thank you for reply.
This is not exactly the issue. I was talking about the HDD originally installed in the PC.
The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

My external hard drive does not show up on my desktop

My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive and that showed up on my desktop.Any help????

if it is NTFS then you need Paragon Software NTFS for Mac.
NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
If it is not NTFS then you need more details. Need more anyway.
PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

HT201250 i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

Look in the Utility folder which is located inside the Applications folder.
You don't want to do anything with the disk on a PC if you want it to work on the Mac. They both use different formats.
Allan

External Hard Drive does not mount

My 2TB external hard drive does not mount and I cannot get it to. Have tried turning the hard drive off and then back on. No response. Any thoughts as to how I can get it to be recognized?

You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HT3275 Time Machine says my external hard drive does not have enough

Time Machine says my external hard drive does not have enough space for the current backup. It needs 34 G out of a 250G hard drive. All that is on the drive is earlier backups. I recently added memory, which may confuse Time Machine into thinking it is a new computer. How can I erase old backups and complete this one?

Walter Goodman wrote:
Time Machine says my external hard drive does not have enough space for the current backup. It needs 34 G out of a 250G hard drive. All that is on the drive is earlier backups.
See #C4 in Time Machine - Troubleshooting.
If that doesn't clear it up, how much data is on your Mac? If TM is only trying to back-up 34 GB, it should be able to delete old backups to do that (assuming you're running Lion).
It sounds like your backups may be corrupted. Try to repair them, per #A5 in Time Machine - Troubleshooting.
I recently added memory, which may confuse Time Machine into thinking it is a new computer.
If that's all you did, no.
How can I erase old backups and complete this one?
Just erase the drive per #1 or #2 of Using Disk Utility.

My external hard drive is not working on my mac.

I have tried all options available such as going on finder and making my hard drives visible and disk utilities

Basically my external hard drive would not eject so i force quit it and the hard drive does not come up at all anywhere on my mac pro OS X version 10.9.4 and it isn't visible in disk utilities no and it doesn't say format either and i have tried it on a windows computer it does not show on their either. the format is Fatdos i think so i can use it on windows and mac and i cant see anything in system reports and yes it is connect by a USB. also it isn't making any noises either

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
Please help.
Thanks

How is the hard drive formatted?
Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
(The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
What do you see?

External hard drive does not show up

External hard drive does not show up in imovie.

Hi,
Welcome to the Discussions.
The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
John

Clean space in hard drive does not work & storage ammount changes

Similar Messages

Maybe you are looking for