Clean start? New HDD & New OS
Can I replace the disk drive with a larger one and update the OS at the same time? I really have no interest in maintaining OS9 or any of the data files. If possible, I would prefer to start clean with the new disk. I think OS X 10.3 will work (ram is already 512MB). What OS package should I purchase for a totally clean installation?
I've seen many posts addressing these upgrades separately, but I would like to do them together.
Thanks.
I am running Tiger on an iMac 600. I turned off dashboard. Tiger requires a minimum of 255meg. Twice that should be OK, if you don't run memory hungry applications. You can always add more later. Of course, more memory is always better.
How to upgrade slot loading iMacs
You need to get the 3 and a 1/2 inch ATA harddrive. They are also known as parallel ATA or PATA. The iMac was designed to take a maximum drive size of 128gig. The 120gig drives are the largest readily available.
Check out this site Installation
iMac HDD Upgrade Guide (Slot-Loading) Visual Installation Guide - slot loading iMac Hard Drive Visual Installation Guide
Just after powering on your machine, insert the X cd. Without a bootable harddrive in your machine, the mac should eventually boot from the cd. If not, power off your machine then hold down the c key then poweron your machine.
Robert
Similar Messages
-
My Premiere CS4 freezes when try to edit preferences/general settings/start new project
First, sorry for my english, i'm argentinian. I got this wired error every time i try to start a new project, click on "new project" tab, and it freezes with not even show me the list of formats, then i have to force to close program. The same when i change something on preferences, and hit ACEPT, frezees. The same when try to enter to GENERAL settings of a project. Tryed everithing, reset perferences file, re-install, once i unninstall it, try the clean utility and it tell's me that is no entry in the registry with an adobe program.
MASTER COLLECTION CS4
MACHINE:
Quad core intel, Q9550
4 GB RAM
ASUS P5Q
WD BARRACUDA 1 TB + WD 160 GB FOR OS
ASUS 9600 GSO 384 MB WITH LATEST DRIVERS
HEEEEELPP!hi, no, i don't have any capture card. And plugins, just magic bullet looks 3. I tryed to delete all plugins too before with no response. I'll try the saving location thing, then tell you how it goes. In the other hand, i always do everything like this, and suddenly this happens. Holly PC's.
Cheers
FUERA DE CAMPO
Producción audiovisual
Date: Wed, 3 Jun 2009 22:37:31 -0600
From: [email protected]
To: [email protected]
Subject: My Premiere CS4 freezes when try to edit preferences/general settings/start new project
Do you have any capture cards in the computer? For example, Blackmagic, Aja, Matrox, CineForm, etc.
If so, it's software might be causing the problem. Go to "Programs And Features" in the Vista Control Panel to remove the software for the capture card. Restart the computer and then try again.
Did you install any plug-ins for Premiere?
If so, remove them and see if the problem goes away.
Also, where are you saving your projects? Try saving one to your Desktop and see if you still have the problem. If you don't, then it could be a problem with your save location.
> -
i have an ipod touch 8gb model number MA623LL. How do I install apps on my ipod? Is it capable of transferring/running apps? Why doesn't my ipod touch have the basic-beginning app on the beginning screen after i erased/wiped my ipod and started new?
Googling shows that you have the 1G iPod. For apps you need at least iOS 2. The iG can go as far os 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Just be aware that there are presently not that many apps that work with a 1G with iOS 3.1.3 -
Sender File Adapter Conversion problem - how to start new recordset?
Hi guys!
I have a source file like following:
aaaakkkkkk
uuuupppppp
&&hhhhffffff
6666uuuuuu
3333rrrrrrrr
&&kkkkoooooo
which means - fixed length 4,6 and && starts new recordset.
I need to get structure like:
<recordset>
<item>
<a>aaaa</a>
<b>kkkkkk</b>
</item>
<item>
<a>uuuu</a>
<b>pppppp</b>
</item>
</recordset>
<recordset> ... with h,f and 6,u </recordset>
<recordset>
<item>
<a>kkkk</a>
<b>oooooo</b>
</item>
</recordset>
Any ideas?
Let's say, I can add && on the beginning of the file and other "lite" changes... but structure stays the same...
so, how to start new recordset? with which conversion parameter? for items it is clear...
Thanx a lot!
Olian
Message was edited by:
Olian Saludewaaaakkkkkk<end_of_line>&&uuuuwwwwww<end_of_line>...
then normal parameters should work fine,
item.fieldFixedLengths==4,6
Item.fieldNames=field1,field2
item.endSeparator=<end_of_line> -
Started new computer up with wrong itunes account how do i change it
Started new imac with wrong itune account. How do i change it?
Lunch iTunes - go to the Home page of the iTunes Store and select 'account' - you will get a dialog and you can log into your account.
MJ -
Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?
I've seen notes about clearing the cache but it seems that this is an older OS and I can't find the plist mentioned here because it's an older system. http://www.youtube.com/watch?v=2cL9RuDV3Qc
Thoughts? Anyone?GUYS, I NEED HELP !
ANYONE? -
Hello,
I created a test report for parallel processing and this works perfectly fine but when I try to build this into a class I somehow cannot create the receiving form inside the method of the class...
method test.
CALL FUNCTION 'ZZCR_PARALLEL' STARTING NEW TASK lv_index DESTINATION IN GROUP DEFAULT
PERFORMING transfo_result ON END OF TASK
EXPORTING
input_xstring = lx_clause_text.
endmethod.
I tried to place the form before the endmethod but this doesn't work and afterwards is also not an option.
Is ABP OO not supporting parallel processing?
Thanks and regards,
ChristophHello Christo ,
I am also trying to use the same in OO context . Just in he early stages of collecting information.If you could just tell what you found out in the document it could be opf immense help.
Comradely,
K.Sibi -
Problem in Call function .. starting new task
Hi,
I want to execute a dialog program in background. I am trying to use call function starting new task.
I am facing some syntax issue. Can any one guide me how to use call function starting new task. The function module is RFC FM. Do we need to define task some where before use please guide.
Thanks in advance. A sample program will be gr8.Hi,
Incase you want to call a RFC FM in background you can call ity like this.
call function 'Y_L_TO_CREATE_HUPAST' in background task
exporting
venum = y_v_venum
backg = 'X'
buser = y_lv_uname
langu = sy-langu
objky = y_lv_objky
printer = y_lv_printer.
Here Y_L_TO_CREATE_HUPAST is a RFC FM.
Regards,
Ankur Parab -
Starting new database LUW inside ABAP during IDoc posting
Hi all,
During posting of an inbound IDoc, I am trying to update my Z-table in user-exit. I want to do it regardless of the result of IDoc posting. The problem is: if IDoc posted successfully - table is updated because COMMIT WORK is called at the end of the posting, however, if IDoc not posted - ROLLBACK WORK is called and table is not updated. So, my aim now is to commit the update of Z-table in any case, but it is the only thing that should be committed - no other prior update FMu2019s should be committed.
I'm aware about the following thread
http://forums.sdn.sap.com/thread.jspa?threadID=1884700
Author of this thread says that he solved a problem by means of RFC and STARTING NEW TASK. But ABAP help says
that starting asynchronous RFC triggers immediately a database commit in the calling program (which is unacceptable because all prior update FMu2019s will be committed ). I've checked and it is really the case.
From my point of view SET UPDATE TASK LOCAL with COMMIT WORK should work in such kind of tasks, but in case of IDoc processing the whole process runs in a local update (see SET UPDATE TASK LOCAL in FM 'IDOC_INPUT'), so writing once again SET UPDATE TASK LOCAL has no effect.
I tested SUBMIT statement as well. It had no effect and then I found out from ABAP help that SUBMIT ... AND RETURN starts new SAP LUW, but NOT a DB LUW. That is if I update my Z-table in the program called by SUBMIT - all ROLLBACK statements still affect my Z-table update.
Is there any simple solution? Please suggest.
Thanks in advance!Hello,
Try SUBMIT VIA JOB.....
Sample Code
call function 'JOB_OPEN'
exporting
jobname = name
importing
jobcount = number
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if sy-subrc = 0.
submit z_idoc_create_process_order and return
via job name number number
with p_aufnr = it_header1-aufnr
with p_werks = it_header1-werks
with p_autyp = c_autyp
with p_auart = it_header1-auart
with p_dispo = it_header1-dispo
with p_opt = c_opt
with p_mestyp = c_mestyp.
if sy-subrc = 0.
call function 'JOB_CLOSE'
exporting
jobcount = number
jobname = name
strtimmed = 'X'
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
if sy-subrc 0.
endif. -
Since upgrading to Yosemite, when I hit either apostrophe or quotation key in Apple Mail, that starts new paragraph like I am hitting the return/enter key right next to the key I am hitting.
I've eliminated the possibility that I suffer from fat finger syndrome by ruling out the issue in other apps like Pages/Word (apostrophe/quotation works fine). This is only happening in Apple Mail. Example: [ Can't ] appears as [ Can' ] with [ t ] as the start of a new paragraph. I use an Apple wireless keyboard, so I also tried using an Apple keyboard connected by USB port. Still have the same issue in Apple Mail, but not in other apps.
Any idea what this is?Update.
This only happens when I am typing above my signature information or replying to an email when the body of the email I am responding to included. Does not happen when I am typing a blank email.
Thanks, -
Call Function'BAPI_USER_CHANGE' starting new task 'TEST'
Hi All,
I have problem with starting new task statement, I am using one FM after that am using starting new task 'TEST'
statement but its not working in one system its working fine in other systems, Please help me who this works.
Thanks in Advance.
Eg: Call Function'BAPI_USER_CHANGE' starting new task 'TEST'
RegarThanks Lqueiroz ,
Now again i am getting a DUMP by saying ,
"An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "At least one entry could not be "
on the called page."
so what can be the reason for this
call function 'ZRFC_PER_DIEM' starting new task lc_taskid performing subr on end of task
exporting
h_guid = it_header_guid_n
request_obj = lt_requested_objects_n.
wait up to '1' seconds.
read table gt_scl into ls_scl index 1.
p_transaction_per_diem = ls_scl-value.
read table gt_scl into ls_scl index 2.
transaction_currency_code = ls_scl-value.
form subr using task_id type clike.
data: p_transaction_per_diem type char13,
transaction_currency_code type char3.
receive results from function 'ZRFC_PER_DIEM'
tables
value = gt_scl.
So basically i am getting dumo when receive statenment is running , by giving above dump.
Regards
PG -
CALL FUNCTION func STARTING NEW TASK task
hi,
i developed rfc to extract data and send to xi
as my interface is Async
as per soem documents it was mentioned the syntax
CALL FUNCTION func STARTING NEW TASK task
wat is the task ? in the syntax
and how do i use it
jeffHi suresh,
this is the code of RFC. if i execute without RFCDESTINATION it executes successfully. when i use RFC DESTINATION it shows error
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
i created RFC destination using TCP/IP and registered program. same parameters i am mentioning in XI.
FUNCTION z_bank_reconciliation.
""Local interface:
*" IMPORTING
*" VALUE(COMP_CODE) TYPE BUKRS
*" VALUE(HOUSE_BANK) TYPE HBKID
*" VALUE(ACCOUNT_ID) TYPE HKTID
*" TABLES
*" CHQDETAILS STRUCTURE ZPAYR
DATA: itab LIKE payr OCCURS 0 WITH HEADER LINE.
DATA: jtab LIKE payr OCCURS 0 WITH HEADER LINE.
DATA: it_bank LIKE zbankrecon OCCURS 0 WITH HEADER LINE.
DATA: it_bank1 LIKE zpayr OCCURS 0 WITH HEADER LINE.
TYPES : BEGIN OF ty_bseg ,
bukrs LIKE bseg-bukrs,
hbkid LIKE bseg-hbkid,
belnr LIKE bseg-belnr,
zlsch LIKE bseg-zlsch,
kostl LIKE bseg-kostl,
hkont LIKE bseg-hkont,
bzdat LIKE bseg-bzdat,
END OF ty_bseg.
TYPES : BEGIN OF ty_t012 ,
bukrs LIKE t012-bukrs,
bankl LIKE t012-bankl,
bankn LIKE t012k-bankn,
END OF ty_t012.
TABLES : payr, t012, t012k, bseg.
DATA : itpayr LIKE zpayr OCCURS 0 WITH HEADER LINE,
itt012 TYPE STANDARD TABLE OF ty_t012,
itbseg TYPE STANDARD TABLE OF ty_bseg,
wa_itt012 TYPE ty_t012,
wa_itbseg TYPE ty_bseg,
total TYPE n.
SELECT * FROM zbankrecon INTO TABLE it_bank
FOR ALL ENTRIES IN itab
WHERE chequeno EQ itab-chect.
SELECT abukrs abankl b~bankn
INTO CORRESPONDING FIELDS OF TABLE
itt012 FROM t012 AS a
INNER JOIN t012k AS b ON bbukrs = abukrs AND b~hbkid =
house_bank AND b~hktid = account_id
WHERE abukrs = comp_code AND ahbkid = house_bank.
DELETE ADJACENT DUPLICATES FROM itt012.
SELECT zbukr hbkid hktid vblnr gjahr zaldt checf chect znme1 rwbtr
waers zaldt zbnkl FROM payr INTO CORRESPONDING FIELDS OF TABLE itpayr
WHERE ( zbukr = comp_code AND hbkid = house_bank ) AND hktid =
account_id.
SELECT bukrs hbkid belnr zlsch kostl hkont bzdat FROM bseg INTO TABLE
itbseg
WHERE bukrs = comp_code AND hbkid = house_bank.
SORT itt012 BY bankl.
SORT itbseg BY belnr.
READ TABLE itt012 INTO wa_itt012 INDEX 1.
LOOP AT itpayr.
read table itbseg into wa_itbseg with key bukrs = itpayr-zbukr
hbkid = itpayr-hbkid.
if sy-subrc = 0.
itpayr-kostl = wa_itbseg-kostl.
itpayr-hkont = wa_itbseg-hkont.
itpayr-bldat = wa_itbseg-bzdat.
itpayr-zlsch = wa_itbseg-zlsch.
endif.
itpayr-zbnkl = wa_itt012-bankl.
itpayr-zbnkn = wa_itt012-bankn.
MODIFY itpayr.
APPEND itpayr TO chqdetails.
ENDLOOP.
LOOP AT chqdetails.
READ TABLE it_bank WITH KEY chequeno = chqdetails-chect.
IF sy-subrc NE 0.
MOVE chqdetails TO it_bank1.
APPEND it_bank1.
CLEAR it_bank1.
ENDIF.
ENDLOOP.
REFRESH chqdetails.
chqdetails[] = it_bank1[].
LOOP AT it_bank1.
MOVE : it_bank1-chect TO zbankrecon-chequeno,
sy-datum TO zbankrecon-check_date,
sy-uzeit TO zbankrecon-check_time.
INSERT zbankrecon.
CLEAR zbankrecon.
ENDLOOP.
ENDFUNCTION. -
CALL FUNCTION WITH STARTING NEW TASK
Hi All,
i'm call a function module through
CALL FUNCTION 'Y_WIN' DESTINATION 'rfc_destination' then it's give right result but when i want to call with starting new task then
CALL FUNCTION 'Y_WIN' STARTING NEW TASK 'INFO' DESTINATION 'rfc_destination'
it does nt provide me any data. i have check in debugger call fm is wkging fine so pls clear me why i'm nt geeting result.
pls give ur suggestions,
AnujDid you use the PERFORMING <form> ON END OF TASK to get the results back; like in the following sample
CALL FUNCTION 'SAPWL_STATREC_READ_FILE'
STARTING NEW TASK taskname
DESTINATION list-name
PERFORMING read_outtab ON END OF TASK
EXPORTING
read_start_date = s_date
read_start_time = '000000'
read_end_date = s_date
read_end_time = '235959'
EXCEPTIONS " failure when calling RFC
communication_failure = 1 MESSAGE msg_text
system_failure = 2 MESSAGE msg_text
RESOURCE_FAILURE = 3.
and
FORM read_outtab USING taskname.
* Receive results back
RECEIVE RESULTS FROM FUNCTION 'SAPWL_STATREC_READ_FILE'
TABLES
v2_normal_records = outtab
EXCEPTIONS " from the called FM
nodata = 1.
Regards -
FrameMaker 11 on "Start New, Linked Web Page" in HTML setup
FrameMaker 11 doesn't let me use certain paragraph tags to save certain FM files into separate HTML files. After I checked the box "Start New, Linked Web Page", that item has a Y in the Reference Pages for new web page, but it was being switched back to N during the process of Save As HTML, right in front me. It worked for some other Paragraph Tags, however. Would someone please tell what I missed? Thanks!!
That's ok. I had the work-around by using the paragraph tag that worked,
so it's working now, although I'm still puzzled about the other tag.
Thank you anyway!
On Mon, Mar 10, 2014 at 8:48 AM, Jeff_Coatsworth -
During Import, scene breaks are not starting new clip.
Imovie HD: When importing from my camcorder (Mini DV) scene breaks are not starting new clips. The video is going into one clip which I then have to manually split each scene into individual clips before editing.
My preferences are set to: Import/Start a new clip at each scene break=ON..
The last time I used Imovie4, this same thing occurred. Prior to that, in Imovie4, it worked as advertised.
Could it be my camera settings?? Panasonic PV-DV910Problem solved.
I normally do not have the date and time displayed in the camera's viewfinder. So, I didn't realize that the date/time had been reset to 1998 and not active. After setting to date/time to the present, NEW recording - when imported - was being split into individual clips at the scene breaks.
However the previously recorded video would not.
My punishment for my lapse is to manually do the "split". But I am a much wiser videographer. -
Use of CALL FUNCTION - STARTING NEW TASK parameter_list.
SELECT strt_code
city_code
commu_code
regiogroup
INTO TABLE gt_adrstreet1
FROM adrstreet
FOR ALL ENTRIES IN gt_street_district
WHERE strt_code EQ gt_street_district-strt_code.
To optimize the performance of teh above query I am planning to use call function CALL FUNCTION - STARTING NEW TASK .....
by spliting the above internal table gt_street_district into two internal tables and use the value of each internal table into two different queries and these queries will be put in call function - start new task ....so that these queries are run in different workprocess and thus improve the performance of the program.
Can you please let me know if this would be a good option and also how to implement the same.
Thanks.....>To optimize the performance of teh above query I am planning to use call function CALL FUNCTION - STARTING NEW TASK .....
nonsense! You should not try parallel processing for a non-optimized SELECT statement.
Better add the first key field of the WHERE condition as said above and check
+ whether the driver table is empfty
+ and whether there are duplicated entries
... And it is also a good idea to really use the SINGLE RECORD BUFFER, therefore you must write
field-symbol: <fs> type ...
LOOP AT gt_street_district ASSIGNING <fs>
SELECT *
INTO TABLE gt_adrstreet1
FROM adrstreet
WHERE counrty =
AND strt_code = <fs>-strt_code.
ENDLOOP.
Then it will be extremely fast!
Maybe you are looking for
-
Data quality report under management consol
I am using BO DS 4. and trying to use the data quality report under management consol. For me these reports are getting generated for every run of the address cleanse Job. Is it possible to get a consolidated report for a day of the Job rather then f
-
Is there a limit to the number of copies you can make at one time.
I was in the process of making 20 copies of my video, I manage to get 8 copies when my computer said it had to turn off due to an error. Now I am unable to make copies because that same message keeps appearing.
-
Opening XFL in flash is maintaining the geometry of the indesign document
Hi , I have expoerted XFL out of indesign document .The indesign document contains 3 pages and each page contains a text element .Exported into XFL and opened in flash CS4 that contains 3 frames and each frame contains a movieclip.And inside each mov
-
REP-3002 in Reports 6i in Solaris 10
Hi all, My report server 6i is running in Solaris machine 5.10, we installed a printer on the same mechine. When we try to run rwbld60 and we click in Choose printer, we are getting the following message: REP-3002: Error initializing printer. Please
-
What are the best practices and recommended method for logging in a page flow? Thanks Girish