Clean up Advice Needed?

Now that the project is done, what is the best way to clean up? Can I just delete the folder where I put everything? What if anything should stay (other than the projects final export to QT)? I just don't want FCE to crash looking for files that are no longer there.

If you really want to delete everything, delete all the contents of these folders (but keep these folders themselves). (They are all under +Final Cut Express Documents+ ):
+Capture Scratch+
+Render Files+
+Audio Render Files+
+Autosave Vault+
+Thumbnail Cache+
+Waveform Cache+
However, if you have more than one project going, each project will have its own subfolder under each of the above folders. Just to complicate things a bit. You will probably only want to delete things associated with the one project you are done with.
And on the other hand, if you want to save your project for future re-editing, you will need to save the following:
+Your FCE project file+
+Source media+ (captured clips, photos, audio etc that you used in your project)
It's also generally a good idea to keep the last 2-4 backup project files that are in the Autosave Vault folder.

Similar Messages

  • Had to have a rebuild of my laptop....advice needed!

    Had to have a rebuild of my laptop....have now lost all my music from my itunes, but I can't transfer back on from my ipod. Also had to register my laptop (same) as another computers, so now no music showing as purchased, though I have. Also have hours of uploaded music from my own purchased, legitimate CDs, but won't transfer from ipod...it says it will erase. So very frustrated....thanks mr technician!    PLEASE  ....help, advice needed!

    I believe that if you do a clean reinstall from your HD's recovery sector (D) or Recovery disks, the hard drive sector C is wiped clean. Everything goes, apps, data, address books, music, pix, viruses
    Is that what you did?

  • I got a virus on my computer and had to wipe it clean.  I need to reinstall photoshop.  I have a membership that I pay $9.99 a month to use it.  How do I re-install?

    I got a virus on my computer and had to wipe it clean.  I need to reinstall photoshop.  I have a membership that I pay $9.99 a month to use it.  How do I re-install?

    Install it the same way you did originally.  Download the Cloud manager, sign in, and install the application.

  • Purchase Adobe Acrobat XI, had to wipe hard drive clean & start over, need to reload it. Can u Help ?

    Purchase Adobe Acrobat XI, had to wipe hard drive clean & start over, need to reload it..Can u Help ?

    Hi greg v.p44270855,
    We would love to help. What part are you having trouble with? For starters, please make sure that you're logged in as an administrator, and temporarily disable any antivirus software. If you don't have the Acrobat installer, you can download Acrobat from http://www.adobe.com/products/acrobat.html.
    If you're running into a particular problem with the installation, please provide some specifics about the problem (error messages, operating system and version, and so so).
    Best,
    Sara

  • Advice needed on buying iphone as gift

    I went to apple store, they do not want to sell iphone to me unless I sign AT&T 2 years plan. I thought AT&T has locked the phone and users must subscribe in order to use it. Why Apple store still not allow me to buy?
    Please advice, if I want to buy online iphone for my brother, do I or my brother have obligation to sign out AT&T plan?
    One more advice needed, I found the shipment takes weeks, do I have option to arrange for self-collection?
    My brother birthday is coming soon, I need above advice urgently.
    Thank you very much

    Tamara wrote:
    I'm guessing English is not your first language. It's possible that you misunderstood them. Apple Store employees won't refuse to sell you an iPhone and you don't have to sign up for service in the store.
    Well that's not entirely true.
    Apple Stores have been instructed not to sell you an iPhone if any of the following is true:
    • You state that you will not be signing up with AT&T.
    • You do not have an ID from a US state, also indicating you will not be activating with AT&T
    • You do not have a credit card
    For example, I've seen US Apple Store managers refuse to sell iPhones to European residents because of the AT&T lock-in.

  • Video intensive work on Mac Pro? Advice Needed

    Hi everyone,
    I've been originally saving up for a while now for an iMac 24" as it offers the best specification price wise. But now I leaning on the Mac Pro and therefore need some advice.
    I know that there are alot of posts on advice - need to buy mac etc. so therfore I would really appreciate if I am afforded some help.
    I am mostly going to do ALOT of video encoding (via handbrake) and I am looking for the best configuration available to achieve lowest waiting time.

    I think you should go back and look at the other threads with advice, your budget. There is "ideal" and "affordable."
    Will it pay for itself in 24 months so you can afford the next revision at that time?
    Start with an 8-Core 3GHz.
    Add a Port Multiplier controller and two drive cases, 5 drives each, nearly 400MB/sec RAID.
    Throw in 8GB RAM.
    Add in costs for software upgrades, two sets of backups, four internal 500GB drives.
    Seagate has 750GB, as does WD. Hitachi has their $450 1000GB monster.
    Give yourself time to build, test, and optimize your setup, and expect to change it over time as you learn more.
    Can't afford that? then trim the 8-core. But Apple has shown how efficient next generation applications already are for video when it comes to 3GHz 8-core Mac Pro.

  • I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

    Hi
    That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
    Remove all your tabs and set the text in justified paragraphs.
    I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
    Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
    The text will jump into place the way you want it to.
    Hope that helps
    Paul
    PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
    after you've set it will be LOADS easier this way.
    You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

  • MOVED: Various advice needed to overclock cpu using my MSI k8n platinum sli

    This topic has been moved to Overclockers & Modding Corner.
    Various advice needed to overclock cpu using my MSI k8n platinum sli

    what HSF for cpu/ cooling for the case do you use? And also, where are the flashing lights?

  • Advice Needed - Should I just do a Clean Install?

    I've got an older 17" iMac FP that I handed down to the kids (6 and 9). The mainly use Garageband and Pages. Since this was my original machine (before getting my new 20" iMac G5) I decided to leave my account on there, just for a backup. Lately they've been getting lots of "Program quit unexpectedly" on lots of apps, including Garageband, iTunes, TextEdit, and Marble Blast Gold. Things have gotten worse since the 10.4.7 upgrade. I just ran a "fix permissions" and "Verify Disk" all looked good. The machine is in good shape, lots of RAM and about 15G of disc space available.
    So, what's my question... I've been thinking of just starting over; doing a clean install. This machine was originally upgraded from 10.2.8 directly to 10.4.x. I just think that maybe starting from a clean disk would help things out.
    Some questions. What is the best way to backup the kids accounts? I have a FW drive connected to it, so I can back up stuff to it. I really don't want a "clone" just a decent backup. Also, is it a good idea to delete my and my wife's user accounts (I hear a disk image of each account is created). I could copy those over to the FW just as insurance. I've been moved over to the new G5 for about 3 months now, so I'm pretty sure I got everything over. But you know what happens, as soon as I wipe the old system I will discover I am missing something form the old machine.
    What do you all suggest I do? I realize that even after wiping the drive I will probably end up with 10.4.7 after all is said and done. I just think that a clean system may be a good start.
    Thanks,
    Alfredo

    Hi, Alfredo.
    1. You wrote: " Lately they've been getting lots of "Program quit unexpectedly" on lots of apps..."See my "Multiple applications quit unexpectedly or fail to launch" FAQ for advice on troubleshooting this issue.
    2. I trust you've enabled Parental Controls, Simple Finder, etc. to keep the children from discarding system-related files? I presume they do not know the Admin password on that computer and their accounts are not set up as Admin, yes?
    3. You wrote: "What is the best way to backup the kids accounts? I have a FW drive connected to it, so I can back up stuff to it. I really don't want a "clone" just a decent backup."The advantage of duplicating (cloning) is that if you decide to reinstall Tiger from scratch, you can restore their accounts simply using the Migration Assistant from the clone on the FireWire drive after you've set up the an Admin account for yourself to manage their Mac. It's a little-known fact that you can use the Migration Assistant to migrate from an a duplicate of the startup disk of an "old" Mac on a FireWire drive vs. Target Disk mode.
    That would also settle the question of saving a backup of your account and your wife's account on that computer for the time being. At some point you could startup from that clone, then use the instructions in "Mac OS X 10.4 Help: Deleting a user account" to delete those accounts from the clone and move the disk images for such to another drive on your new Mac. Note that if one of the accounts you are deleting from such is the only Admin account, you may want to first create another Admin account on the clone and use it to delete-and-preserve your account and that of your wife as you need to use an Admin account to remove accounts.
    For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ.
    4. If you're going to perform a full, fresh reinstall of Tiger on your children's computer, I also recommend — after cloning the drive and assuring you have good, bootable clone — to first "zero" the drive to remove any bad sectors that may have developed. See "Disk Utility 10.5 Help: Securely erasing disks." Select at least the "Zero Out Data" security option.
    5. FYI: If your children access the Internet, see my "Internet Safety for Children" FAQ for my advice on protecting your children on the Internet. This FAQ lists some Mac-based solutions, tips I have suggested in prior posts, and a list of links for additional information.
    Note that some of the information above is from the "Moving to a New Mac" and "Zeroing Volumes" chapters of my book, Troubleshooting Mac® OS X, Tiger Edition.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Advice needed on clean install of SL

    Okay, on my 3.06ghz 24" iMac SL is a total and utter dog.
    I won't go into the details but in short it is painfully slowly to the point of being nearly impossible to use.
    I want to do a clean install but want to avoid dragging anything over from the old system that may be causing these problems.
    So... I will do a full back-up using SuperDuper so effectively my machine will be cloned.
    How do I then transfer user data safety?
    Can I just pick-up the user folders from the back-up & drop them in? (once the profiles are set-up)
    Will all of the meta-data from iPhoto transfer across if I simply drop the old library in & then direct iPhoto to it?
    My iTunes library is already on an external drive so that shouldnt be a proble should it?
    How do I get all of the mail to transfer?
    And I am sure there are other things I cant think of now that others may be able to add.
    Any help doing this will be deeply appreciated.
    This is my last attempt at getting SL to work before going back to Leopard.

    Okay booted in safe mode.
    Memory was immediately running at 36% with nothing open.
    Has been running for 10 minutes & is up to 46% and climbing.
    So I would have to say that the 'problems' whatever they are persist.
    First, please be aware that if the OS is running it is never true that nothing is open. Normally, more than two dozen processes are running, even you have done nothing besides logging into a user account. Processes are programs running on your computer. Many of them run invisibly in the background to provide functions your computer must have to operate. These processes will use a lot of memory. To learn more about how OS X manages memory usage, launch Activity Monitor & type "Viewing system memory usage" into its help search box & click on that help topic when it appears in the list. Note in particular that 'inactive memory' will remain in RAM until that memory space is needed by something else.
    IOW, 40, 50 or even 75% of memory shown as "used" is not of itself a sign of any problem. What may be a sign of a memory usage problem is too much "wired" or "active" memory, but since this varies by the applications in use, it is hard to say how much is too much.
    From your earlier comments, I suggest checking the processes related to Eye TV in Activity Monitor & perhaps quitting them to see if your problems remain. Also, make sure you have the latest Eye TV update -- EyeTV Versions 3.0 through 3.0.4 are not compatible with Snow Leopard. For more about this & to update to the latest version, see Elgato Product Compatibility with Mac OS X 10.6 Snow Leopard.

  • Advice Needed: Cleaning iPad Case

    I'm looking for tips on how to best clean Apple's official iPad case. I don't use it very much if at all, but it's REALLY dirty and I'm unsure about how to clean it. I'd like to get it looking halfway decent again.
    Thanks in advance for any feedback.
    Steven

    I use a terry wash cloth dipped in warm water then wrung out. Scrub the case thoroughly, then dry it with a dry terry towel. It gets 95% of the gunk out of the cover. Certainly improves its appearance.

  • I have constant K8N Neo2 problems advice needed. (long) Update

    I need some advice on what my problem might be and if I need to RMA the motherboard or power supply.
    I have a new Athlon 64 3500+ processor, MSI K8N Neo2 Platinum BIOS v1.3 motherboard, with 2 512MB DIMMs of Corsair Value Select Memory. I have had and am still having a series of crashes and lock-ups I will list below. FULL SYSTEM SPECS BELOW AT BOTTOM.
    I initially installed the motherboard with a SINGLE 120GB hard drive from the old machine and the installed the memory in memory slots 1 & 2 to try dual channel memory mode. I then formatted the C partition and did a clean install of Windows XP Professional with SP2, installed the MSI drivers on the installation CD that came with the motherboard (Nvidia nForce3 Version 5.03 System Drivers, Realtek gigabit ethernet driver, Realtek AC97 audio driver) & the GeForce v66.93 video driver. I then got my first blue screen "MACHINE_CHECK_EXCEPTION" crash, I ignored this crash and rebooted. I shortly got a black screen crash which I also ignored.
    I then installed a new 200GB hard drive and a old 120GB so I could transfer the data from the old 120GB to the new 200GB drive. The data transfer went fine. As I was preparing to install some applications I then got my second blue screen "MACHINE_CHECK_EXCEPTION" crash. Suspecting the Corsair Value Select Memory could not handle dual channel I ran Memtest-86 for 2 passes and got NO errors with the memory in dual channel mode, so I left it.
    With my data backed up on the 200GB new drive I removed the new 200GB and the second 120GB hard did another clean install of Windows XP Professional with SP2, this time with Nvidia’s nForce3 Version 5.10 system drivers, the Realtek gigabit ethernet driver and Realtek AC97 audio driver  from the motherboard installation CD & the GeForce v66.93 video driver. I downloaded the latest version of Core Center and installed it and got it working. CPU temperatures were showing a low of around 29C, average of about 44C, and spikes at full loads of about 55-57C. I then ran Ghost to back up the boot partition. I installed all my applications, reinstalled the 200GB and 120 GB hard drives moved some data around with no crashes.
    I then installed Rome Total War and played for about 2 hours and had one black screen crash after the reboot played for 4 more hours with no problems so I shut down and went to bed.
    In the morning I got up started the computer let it run for awhile the CPU temperatures were in the low 30Cs to low 40Cs I tried to copy some files from the D partition to desktop and the screen freezes I waited about 5 min. with no change and no drive light activity so I hit the reset button. Upon reboot I got a ‘no system disk found” error, I went into the BIOS and checked the drive set-ups and boot priority, everything was correct. I tried for a half hour to get the system to boot with on luck. I used the Ghost to restore the partition image I had made earlier and still no boot. I finally decided to reinstall XP again put in the installation CD and when I got to the screen where you decide where to install Windows I changed my mind quit and bingo the machine boots into the restored Ghost partition???? I started to reinstall my applications got one more blue screen"MACHINE_CHECK_EXCEPTION" crash and another screen freeze that I had to reset.
    So I decided to start from real scratch I removed the new 200GB and the second 120GB hard drive ran Killdisk on the boot drive, made a new clean 20GB C partition and did another clean install of Windows XP Professional with SP2, this time with Nvidia’s nForce3 Version 5.10 system drivers, the Realtek gigabit ethernet driver and Realtek AC97 audio driver from the motherboard installation CD & the GeForce v66.93 video driver. I installed the latest version of Core Center and installed it and got it working. CPU temps were as before.
    I tested the memory with Memtest-86 again 2 passes no errors. Just in case I then moved one of the memory DIMMs to memory slot 3 out of dual channel mode and to a slower speed and ran Memtest-86 for about 20 hours with 21 passes with no memory errors, so I think memory can be ruled out as the problem.
    Next I installed my applications I got one screen freeze that I had to reset. I reinstalled the other 200GB and 120GB hard drives. After I got all my applications install and Ghosted the boot partition. I have had one more one screen freeze that I had to reset.
    I have a problem I simply cannot figure out. The memory is obliviously fine. While I have seen CPU temperatures spikes as high as 57C the CPU temps as reported by Core Center averages in the high 30Cs or low 40Cs and most of crashes/lock-ups don’t seem to occur during high CPU load/temp. The power supply might be a little light for the system but many of the crashes have occurred with only one hard drive in the system. The fact after one for the lock-ups the system would not boot for awhile and then magically just booted gives me concern there might be a motherboard problem.
    Any solution ideas would be appreciated. Should I RMA the power supply, the motherboard, or both.
    Full system specs:
    Processor: AMD Athlon 64 3500+, Socket 939, 0.13 Micron, with retail heatsink and fan.
    Motherboard: MSI K8N Neo2 Platinum BIOS v1.3
    Memory: Corsair VS1GBKIT400 1GB (2 x 512MB DIMMs) Kit DDR400 PC3200 CAS2.5 Value Select Memory - one 512MB DIMM in memory slot 1 and one 512MB DIMM in memory slot 3 running at DDR333 speed.
    Video Card: Chaintech GeForce4 Ti 4600
    Drives:
    Maxtor 6Y120L0 120GB hard drive as master on IDE channel 1. 3 partitions C (boot partition), D, & E.
    Seagate ST3200822A 200GB hard drive as slave on IDE channel 1. Single partition.
    Maxtor 6Y120L0 120GB hard drive as master on IDE channel 2. Single partition.
    Sony DRU-500AX DVD-RW as slave on IDE channel 2.
    SATA disabled in BIOS.
    No PCI cards.
    Case: Antec SX 835
    4 80mm case fans (2 fans in front blowing in, 2 fans in rear of case blowing out).
    Power Supply: Thermaltake W0008RUC Silent PurePower 420W w/Active PFC
    Power Supply Specifications:
    Maximum Power: 420W
    PFC: Acitve
    Power Good Signal: 100-500ms
    Hold-up Time: > 16ms at Full Load
    Efficiency: > 65%
    Over Voltage Protection: +5V trip pointInput Voltage: 100 VAC / 240 VAC
    Input Frequency Range: 47-63 Hz
    Input Current: 8.0A
    Output: +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A

    Quote
    I then installed Rome Total War and played for about 2 hours and had one black screen crash
    Great isn't it (although not without the occasional crash)
    Would you say it's better but not there yet ? or the same ?
    I thought the same as Ibn Quote
    Your PS unit is a little weak for that much hardware, but I doubt thats your problem as well
    re your PSU, given youv'e got a less hungry Graphic Card, thought it was at worse marginal, have seen worse.
    To investigate further it may be worth diconnecting one of your HD, maybe the 200gb for a time.
    It's a small thing but it may be slightly better to have both your maxtors together on IDE channel 1, given their identical.
    good luck - keeo us posted

  • Advice Needed - Migrating to Macbook Air

    This is a multi-facited question and I am seeking advice most of all.
    I have a 2008 iMac
    I would like to retire it and use my 2011 Mac Air as my primary computer (With a Thunderbolt Display)
    If I use the Migratiion Assistant - will I have to delete the files currently on my Mac Air?
    Is there a way to merge them?
    My concern is also space. With x free
    I have 256 ssd hard drive on my air. with 80 free
    The drive on the iMac is 320 Gig HD with 170 Gigs free
    I have important programs such as CS6 on my iMacs drive - I would prefer not to have to reinstall them.
    I have heard that there are issues with booting and updating an OS on an external drive.
    I have considered using Super Duper to move my iMacs system to an external drive and selectively boot to it as needed.
    Is that a good idea?
    Any advice is truly appreciated.

    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
      1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
      2. Screensavers written for the PowerPC System Preference add-ons
      3. All Unsanity Haxies Browser and other plug-ins
      4. Contextual Menu Items
      5. Applications which specifically require the PowerPC G5 Kernel extensions
      6. Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
      1. Intel In Macs
      2. Apple Guide to Universal Applications
      3. MacInTouch List of Compatible Universal Binaries
      4. MacInTouch List of Rosetta Compatible Applications
      5. MacUpdate List of Intel-Compatible Software
      6. Transferring data with Setup Assistant - Migration Assistant FAQ
      7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
      1. Repair the hard drive and permissions using Disk Utility.
      2. Backup your data.  This is vitally important in case you make a mistake
          or there's some other problem.
      3. Connect a Firewire cable between your old Mac and your new Intel Mac.
      4. Startup your old Mac in Transferring files between two computers using FireWire.
      5. Startup your new Mac for the first time, go through the setup and
           registration screens, but do NOT migrate data over. Get to your
           desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
      a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
          Late 2008) - What to do if migration is unsuccessful;
      b. MacBook Air - Migration Tips and Tricks;
      c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
          wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • Aperture Library Issues on NAS - Advice Needed

    List-
    Need some practical advice here. I've got a 90GB Aperture library that resides on a NAS (QNAP 419P II) that is experiencing major issues. Understood that having the library live on a non-HFS+, non-local drive is not advised by Apple, but it's been there for two years with no issues to speak of.
    I had a power failure occur that seems to have done some damage to the library in some way. Upon opening the library, I got an error that said that there were inconsistencies with the file and that it needed to be repaired. I repaired it, and noticed something strange. In almost all files, the picture resolution was poor and both the camera and lens information was gone--in addition to the fact that the Adjustments capability was disabled.
    I ran the Aperture first aid and ran all three processes--concluding with the full library rebuild. It looked to be successful and resolution, previews, and picture info returned--but halfway through the preview reprocessing the process just stopped and the beach ball of death ensued. I let it run overnight and it never recovered. I had to force quit and now if I reopen the file it say that there are inconsistencies and that the library needs to be repaired, which won't help.
    I also tried to move the library off of the NAS an onto the local drive, but encountered an Error - 50 message--something that apparently is well known in the NAS world where Mac permissions get screwy when dealing with non HFS+ drives.
    I have a backup of the original library, but it is sitting in a cloud repository (CrashPlan) that will take time and money to restore.
    All of the masters are intact in the Aperture directory, and I have very few major adjustments made to any photos. Aperture is really just a repository for me.
    So any practical advice would be appreciated as to how I can create a new local Aperture library and get all of the existing photo files there. I am pretty much giving up on the idea of getting the existing NAS-based library to work properly, so this is more of a real-world question on how to create a new library and eliminate whatever issues there are with the other Aperture files. It looks like everything in the Aperture package is in place, but the library itself is just malfunctioning.
    I am also considering moving everything into iPhoto as well, as Aperture may simply be more than I need for my usage. If is is faster and a but simpler to manage, that could be the right answer as well.
    Thanks in advance for any ideas or guidance.

    The problem is most likely with the library itself being located on the NAS.
    But you can have a hybrid solution where the library is located on your internal drive while the actual image files are located externally, eg on your NAS. Image files stored within the Apeture library are called "managed" while image files stored externally are called "referenced". Whichever approach you take, the process is the same:
    If you try to make a new Library from your masters, you will lose your project structure. The resulting mess will be in accordance to how you created your projects. Basically, if you look at your Masters folder, that's what you'll end up with when you import your masters. If that isn't a problem, the process is simple
    Step 1: Prep.
    Move or copy your masters out of the library bundle to a folder (to make them more accesible in finder).
    Step 2: Create new library.
    Within Aperture, from the File menu "Switch to Library -> Other/New..." to create a new Library on your internal drive.
    Set the preferences to indicate previews/faces etc. I'd turn these off for now as they will slow you down.
    Step 3: Import your images.
    Within your new library, File -> Import - Folders as Projects. This gives you a dialog where you specifiy what and where to import.
    If you choose "Import folders as: Folders and Projects" you will get a folder structure that matches the Masters folder, with projects at the end of the chain with names like 20120213-200100.
    If you choose "Import folders as: Projects and Albums" you will get a single Project called "Masters" with a folder and Album structure that matches the Masters folder.
    Neither of these will look particularly great. If you want to avoid this mess, here's what I'd try.
    Fix your library again like you did before. After the rebuild, go to the Aperture activity window (SHIFT + CMD + 0) and cancel the preview generation process before it has chance to hang. This should give you a sem-functional library, hopefully functional enough for the next step:
    Select all images and use File -> Relocate Original to move your original files out of the library. During this process you can specify that the originals are stored in sub-folders that match the project name, within a parent folder if required.
    This gives you a much neater structure for importing into your new library where the projects will get the folder names (which will be your existing project names). It may not be perfect, for example if you have the same project name in different folders and don't/can't segregate them, but it's a lot cleaner than just importing your masters folder.
    Andy

  • The dreaded clicking boot drive..... advice needed

    So wake up today turn on my tower and all I get is a grey screen and a clicking boot drive. Sounds like the other three drives are mounting fine.
    So I know enough to say bye bye boot drive.... my question is-
    I now have purchased Snow Leopard and will start fresh. Should I take out the remaining three drives while I handle a clean install. Any advice to make this process a bit more painless? I back up all drives expect my boot UGH... I am going to start using time machine.... learned a lesson.

    SuperDuper is $29 and excellent way to clone and have bootable backup of your system. Do it!
    You may want to backup what you can even now.
    Whether the drive is dying or just has a bad directory, only Disk Warrior can really help with a badly corrupt directory in my experience, and is #1 tool and should be must have essential.
    TimeMachine won't give you a bootable backup.
    I'd pick up some new drives, obviously for your backup and spare system. I've never had trouble with WD 10K VelociRaptor and excellent boot drives, though costs more, 150GB is usually more than adequate for OS and apps.
    Test all your drives first, with SL DVD and with latest Disk Warrior but you don't need to remove them. You may need to remove or check your external drives; any drive controllers which need a new driver.

Maybe you are looking for