Clean up specific memory address

does anybody know if its possible to clean up a specific memory address using labview?

You're asking about it in a funny way. There's no way you could determine the memory address at which the DLL is loaded, and even if you could, clearing that address would be more likely to crash your computer than unload the DLL.
Can you modify the VIs that call the DLL to accept the path to the DLL as an input? That would be the best solution. You could possibly create a separate executable that only handles calls to the DLL and allows access through VI Server; you could then exit that separate program any time you need to unload the DLL. I did something similar once when I needed to access an external component that crashed regularly; by moving it to a separate program I was able to keep my main program running even when that component crashed. It's not an ideal solution, though. I suppose you could wrap the VIs that call the DLL into their own, LabVIEW-generated DLL, and call that DLL in your code instead, which would give you the ability to unload it with the empty path approach.

Similar Messages

Blinoz - Write to and read from memory address

How do I write to or read from a specific memory address such as Hex 378?

I may be wrong here but I think this cant be done in pure java.. The solution would be to use jni as you can do this sort of thing with c++....

Creating memory addresses

Hi,
I urgently need to create a memory file to read from. Attached you have an array of addresses (in HEX) and an array of the content(in HEX) that should go to that address location. Here is what we want, we want to write (TO A TEXT FILE) ONLY THE ELEMENTS IN THE CONTENT ARRAY. But each element MUST GO TO its specific locations (addresses).
for example the content 1F MUST go to line 0x61 of the file; 15 must go to line 0x62 of the file....
Please your urgent help is needed.
Attachments:
address_contents.vi ‏6 KB

Maybe something like this can point you in the right direction....
Apparently, you want linefeeds. If you use a zero padded hexadecimal format, you can calculate the offset from the address. Modify as needed.
(To create a binary file instead, decide on a numeric representation for the 1D array, the write it directly to a binary file)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
AddressContents.png ‏5 KB
address_contentsMOD.vi ‏13 KB

How do I force an app to use a specific IP address if I have multiple IPs?

MacBook Pro
Retina, Mid 2012
Processor 2.6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Software OS X 10.8.5 (12F45)
I sometimes run simultaneously on Wifi through a wireless router and also connected to another router with an ethernet cable. I have applications that need to connect to different pieces of studio hardware, sometimes on one router, sometimes the other. The problem I have is sometimes the application that I am using will not look for the hardware on both routers. It checks the router that doesn't have the hardware and then never checks the other router. It indicates that It can't find my hardware. Is there any way through OS X to force or limit an application to check on a specific IP?
Thanks in advance.
Eddy

You can play with the 'route' command in an Applications -> Utilities -> Terminal session to specify which route a specific IP address should take.
man 8 route
Google can most likely give you examples you can use to specify routes.
Routes must be setup after each reboot.

How do I configure my Airport Extreme to work in Bridge Mode and provide specific IP addresses to clients

My Airport Extreme is working with an Airport Express to wirelessly extend my wireless network. Both Airports are configured in Bridge Mode per the instructions I found on Apple's support site. I want to assign a specific DHCP address to a wireless camera that is in range of the Extreme, but I understand that the Extreme needs to be in DHCP Only mode to do this. But if I change the mode to DHCP Only, the Extreme will lose contact with the Express. How can I get both functions to work - wireless network extension and specific DHCP addresses?

Then what device is providing DHCP? Only once device per subnet should be the DHCP server. One should be DHCP and NAT and the other in Bridge mode for most home setups. The unit with DHCP and NAT should be the one connected to your cable or DSL and the other set in Bridge mode only extends your network.
On the wireless config page set whichever you're using to extend your network to "Extend a wireless network" and give it the details of the network to which you're attaching it.

How can I get responses to return to a specific email address?

How do I get all my for responses to return to a specific email address? Does the Acrobat user need to be logged in with this email or is there an option for this?
Any help would be appreciated!

Looks to me like the Distribute Forms feature in Acrobat taps into the email address you have specified in Acrobat as your identity; that's where it gets the mailto: address associated with the submit button in the document message bar.
Furthermore, if you create a form in LiveCycle the distribute process still seems to tap into Acrobat. Just for grins you can open the distributed form in LiveCycle (better make and open a copy so you don't break the Reader extended usage rights), go & look in the object palette at the submit address property of your email submit button and it will be blank. Surprise! This data has migrated to one or more than one script at the document level. And if your user then opens your LiveCycle-made form in Reader to complete and return, the submit button in the document bar corresponds to your identity email address in Acrobat.
So I managed a quick but ugly workaround for an email submitted form by:
Going into Acrobat:Edit/Preferences/Identity
changing the email address in my identity to the desired return address
distributing my form (can do either in LiveCycle or in Acrobat)
putting my Identity email address back where it was afterwards.
Good luck with all that. And if anyone knows a more elegant method, do share!

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

How to Block Specific IP Address (YouTube)

This is a follow-up question to one I posted earlier this week. I want to block YouTube (and a handful of other sites) from my stepson's new iMac and it was suggested I try/use Leopard's "Parental Control" feature.
I tried that, but the problem is, when he attempts to visit the site, a warning page pops up informing him Parental Controls have blocked the site, then gives him the option to log in as the administrator or to email the admin for access...and that's pretty much the worst thing that could happen. He has serious Obsessive Compulsive Disorder (OCD) and it HUGELY upsets him that he can't guess the Admin password.
Soooooo...can anyone suggest an alternative means of blocking a specific IP address that does so WITHOUT serving up a "Contact the Administrator" message? Someone has suggested blocking the IP address via the network router, but I haven't a clue how to do that.
Any help?
Thanks.

Something else you might look at to see if it is suitable for you is to use the DNS servers from www.opendns.com (on your router for example) and set up an account on there, then exclude the sites you don't want accessed - either by the names of the sites OR by the category of site they are.
What that does is NOT actually "blocking the site" as such, what it does is when the workstation wants to resolve the hostname into an IP address, OpenDNS will fail the request. The user will see a browser page from OpenDNS saying that the site was blocked by the network administrator - you can change the wording and even add an icon if you like.
If the user doesn't have admin access to the workstation (whereby they could change the DNS server locally to your ISP's normal DNS, which presumably doesn't offer this sort of lookup-filtering) and they don't know the IP address(es) of the sites they want to access - obviously if the workstation doesn't have to go to a DNS to look the address up, it doesn't matter whether the DNS is blocking the lookup for you - this works well.
There's more information on www.opendns.com - as I said maybe it won't be appropriate for you, but if it is, it's pretty easy to set up and to administer.

How to whitelist a specific email address

We are trying out an ironport C350. I am looking for a way to whitelist a specific email address ex. [email protected] The whitlist appears to onlyl let you add a whole domain or i.p. range and not a specific address. Is there a way to do this or would I need to build some kind of incomming content filter by sender name?

A Content Filter would be the easiest but it is processed after the SBRS check.. Remember you can have a one content filter with multiple checks just make sure you use OR and not AND.
So if you want to make sure a specific email is not spammed check you would need to create a Message Filter (regX expression) but then every single inbound email would be checked againest this filter.
So the best way might be to create a whole new policy and place it before your normal or default policy. Have the policy only apply for sender = [email protected] You can turn off the spam check for this policy.

OS won't boot--invalid memory address message

10.4.9 running on a G4 867 Dual. System won't boot from internal disk or from Tiger installation CD. I get an error message for an invalid memory address followed by some hex code. The message says I can type "boot-up" but all I get is the little folder icon, then the flashing question mark. If I type "shut-down" this works.
I've detached all external accessories, disks, etc. I reset the memory chips. Unplugged two of my 4 internal disks. Doesn't help.
What I was doing before this--running iDefrag on one of my internal disks (not the startup disk), stopped & quit the app partway. Also running SuperDuper backing up yet a third internal disk to my external firewire storage--also stopped & quit partway.
I inserted my 10.4 installation disk to install a system on an external firewire disk (none of the above, I have a lot of drives) but could not start up from the CD. Started to get the error above. Can't eject CD, either. Bluetooth seems fine as my Apple bluetooth keyboard works.
Another tidbit--my combo drive may be having problems seeing discs. Some will mount on my iBook but not on the G4 Dual.
Any ideas?
G4 Dual 867 Mac OS X (10.4.9) 2 GB RAM

hey if you actually restrt your mac now where will your mac boot up to does it reach the firmware screen if it does just try typing in
reset-nvram
and then
reset-all
the mac should restart

Memory address range - Solaris 10

Hi All,
Is there any command in Solaris 10 to know the memory address range ( hex) of each DIMM ?
How to calculate the size of the module based on the address range ?
Thanks in advance

Hi All,
Is there any command in Solaris 10 to know the memory address range ( hex) of each DIMM ?
How to calculate the size of the module based on the address range ?
Thanks in advance

Trace for a specific IP address in SQL Profiler

Hello,
I am looking for a way to trace from a specific ip address in sql profiler, Is there any filter that we can use to trace the database calls from a specific ip address.
Thanks in advance.

Thanks for the reply, I have tried by selecting hostname from column filters and gave my system name in Like.
When i run application from localhost then it returns trace results, but on live domain it is not returning trace results, M i missing something in configuring filters?

How do you clean the entire memory and start over

how do you clean off the memory in order to start over

Why are you asking on the Apple forums?

How to get the memory address of an array (pointer in C)?

I am writing an application that exchanges data with a PXI device via DMA. Basically I will provide it a memory address and a direction, and it transfers the data. I would like to give it the memory location of an array in LabVIEW, but I do not know how to get the memory location without doing a DLL call to C code that returns the pointer. Is there an easy way to do this in LabVIEW? Any help is much appreciated.

A similar question was asked recently regarding strings. You cannot pass pointers in LabVIEW as you do in C. You can pass an array to a DLL, but that means you would need to write a wrapper DLL. Be sure to read the section in the LabVIEW Help on calling code from text-based languages and also take a look at the "Call DLL" example that ships with LabVIEW - it contains many examples of how to deal with various datatypes.

SRW2024 - Forcing clients to use a specific IP address (based on port)

With the SRW2024 managed switch, is it possible to force a client computer connected to a port to use a specific IP address (for example 192.168.1.30) and if the client tries to configure any other address which is not 192.168.1.30, the traffic is dropped and they essentially cannot access any LAN or internet resources?
Basically what I would like to do is associate an IP address with every port on the switch. It sounds like this would be possible using the IP based access control feature, however I wanted to confirm.
Thank You
Message Edited by RedWarrior on 12-05-2008 11:49 AM

Well, I have contacted three different stores asking which hardware version they have in stock, (even providing instructions on how they can check)... Two of the three stores said they didn’t know what I was talking about and couldn’t check it for me, and the third one actually told me to contact Linksys and ask them... as if Linksys is supposed to know which hardware version their store carries!
So I guess I will have to ask once more if anyone here knows how long hardware version 1.2 (for srw2024) has been out?

Clean up specific memory address

Similar Messages

Maybe you are looking for