Cleaning heat sink on Macbook Pro Retina after liquid spill... HELP!

Hello all...
My wonderful boyfriend spilled about 3-4 tablespoons of orange juice on my Macbook Pro Retina (15in) on Thursday. Right over the left speaker and onto the ESC, ~, brightness up and down, 1, 2, 3, TAB, Q, W, Caps Lock, and A key. It also dripped down and got into the vent. I immediately (like within 1 second) grabbed it and turned it upside down, and wiped it up while holding it upside down. I then turned it off and held it upside down for some time, and let it sit open and off after that. I turned it back on the next day and had no apparent issues. (However today some of the keys have been "crunchy", so I think I better clean them...)
I couldn't get it to the Apple store until yesterday because of Hurricane Sandy and not having power or anything. I had the genius check it out. He could only take off the back without having to charge me anything and he said that none of the liquid sensors were tripped in the back of the computer but that there was some dried up orange juice in the heat sink (but apparently not really anywhere else which he said makes me the luckiest person in the world). He took a photo on his phone and showed me... just some residue and orange juice that looked "dried up" in like 5 or 6 of the vents. He said that I could try to clean it myslf with alchohol wipes and a toothpick at my own risk. But I am very nervous as I am not exactly tech savvy... I watched videos on how to take the back off, but the part about disconnecting the battery and all gets me nervous. My question is, do I have to disconnect the battery to just gently clean up the heat sink with a little toothpick and alchohol wipes? Do I have to ground myself? What do I do?
Also, how necessary do you think it is to even clean it up? Could the heat sink need to be replaced in the future from this? Is it really a big deal? I'm looking for honest answers, since I felt like the genuis guy had too much liabality to say anything to me about anything.
Unrelated, what are the chances that liquid got through the keyboard to anything more sensitive to liquid? The genius couldnt really give me an answer. I have noticed just as I am typing now that sometimes it seems that the cursor of where I am typing will just jump back to the end of the previous line when I hit the Caps Lock key... it's very strange and I'm getting agita just thinking about it. Could that be a problem with just my keys getting stuck somewhere or a bigger problem with hardware being damaged... help and THANK YOU!

When i start any game the CPU goes up to 90° in 2 minutes and the computer shutdown after at least 5 min.
I found a solution. after a lot of research i checked that my fans are working on the minimum means at 2000 rpm even when the games are on. so i install it a software called smcFancontrol that u can control ur fan speed and i make it up to 4000 pm (you can do it with iStat menu too) and i tested my computer. I Have been playing on my macbook pro since this morning and there is no problem of overheat or shutdown.
Is it normal that we need to change the fan configuration or control to play a game that was working fine before.?
for cooling my machine i have a mStand Rain design http://www.raindesigninc.com/pic_high%20res/mstand_macbookpro_keyboard_perspecti ve_unibody.jpg

Similar Messages

Heat Sink on MacBook Pro (mid 2012)

I recently acquired a mid-2012 MacBook Pro that is in need of repair. The device was advertised by the seller as needing repair, and I wanted to experiment in repairing such a problem.
The MBP suffered the symptoms of a failed logic board - no power, LEDs don't light up on either the side of the Mac or the MagSafe Adapter. Per the tutorial on Ifixit.com, I took a look inside the laptop and was able to safely remove the logic board. As I examined the heat sink and the thermal paste connecting it to the processor, I found that the paste had completely dried up. In other words, as I completed part 3 of Step 27 ("Carefully remove the heat sink from the processor."), the heat sink could be removed immediately after I unscrewed it from the logic board - no need to use the spudger to loosen the paste. While examining the interior, the battery also seemed to have signs of wear (the screw tab closest to the optical drive appears cracked); no damage/leakage of battery cells detected.
What are my options at this point? Will it be worth it if I try to clean the old paste from the heat sink & processor, then reapply as instructed (on ifixit.com or other reputable DIY repair sites)? Or, because the battery is slightly damaged in addition to the lack of processor-to-heat sink connectivity, would it be easier/better in the long run to make an appointment at my nearest Apple Store for a Genius Bar consultation?
Thanks for any advice & comments!

Re: Heat Sink on MacBook Pro (mid 2012)
created by PlotinusVeritas in MacBook Pro - View the full discussion
This solved my question This helped me
And why again are you worried about re-applying thermal paste to the heat sink to CPU on logic, ...since youve already indicated the logic board is fried....?
I assume you got a new logic and are asking about grabbing some white thermal paste off Ebay.....or?
... or I'm basically seeking the opinions of more experienced members of the Community (such as yourself ) that can verify my attempt to personally fix the device are not worth it, and are better left to Apple's Geniuses.
Actually, I haven't gotten a new logic board yet. More or less, I was taking it apart for inspectional purposes only. I wasn't intending to remove the heat sink, but the thermal paste was already worn out. I am not sure if the logic board is fried, though after examining the whole laptop some more, the previous owner may have tried to do some fixing/upgrading and failed (foam missing, a bracket for the HDD missing also). I was examining the logic board to determine if there have been any liquid damages to the machine - none found, to the best of my knowledge.

How do restore factory settinngs ( macbook pro retina) after i used migrate wrongly

how do restore factory settinngs ( macbook pro retina) after i used migrate wrongly. and want to start from the original

Use Lion Recovery to reformat the drive.

Why Apple store can't Upgrade the storage for Macbook Pro Retina after sale?

Hello everyone
I am disappointed from apple store .
One month ago i bought the new MacBook Pro Retina with storage 256 GB and now i would like to upgrade the storage to 768 GB as mentioned in there website where you can configure the storage higher,but unfortunately i went to apple store to upgrade,but they refused and they said we only upgrade within the order in the beggining before you buy it !!!!!!!!
even if i go to normal shop they will do the upgrade but i will lose my waranty .
Is there any advice ?
Thanks
Khalid

No one seems to be hearing what Big Q is saying.
He can pair his iPhone to his Macbook, but cannot CONNECT. He's NOT asking for alternative solutions, like Wi Fi.
I am able to both pair and connect my one one Macbook to my other one, but I can only pair but not connect my iPhone or iPad to either Macbook. So I have the same problem. But I can pair and connect my Macbooks to other Bluetooth devices, like my ancient Nokia cellfone, or my Bluetooth HP printer.
It's irrelavent that I can instead use a direct USB cable or Wi Fi between my Macbooks and my iPhone/iPad - why can't I use Bluetooth? If Apple does not allow Bluetooth between it's Macbooks and other Mac devices, then why have Bluetooth at all? Does my iPhone have Bluetooth only so that I can pair and connect to my my non Apple mobile handsfree car kit, or communicate easily with the dreaded Apple enemy Samsung, or what?
Make no mistake , I am a diehard Apple fan, but this Bluetooth non compatibility issue appears shortsighted and seemingly pointless. Why does Apple not just say why they created the non compatibility, or have a message on the Bluetooth setup programme which simply and clearly says "don't bother wasting hours of your time trying to pair and connect your iPhone to your Macbook, because we don't allow that anymore, reason being that............"?
As a first time user of this Forum I am surprised at the intolerant and highhanded tone of some of the replies to what is a legitimate question, that is obviously plagueing many, many other Apple users.

Macbook pro retina airplay disappearing, need help

I just bought a macbook pro retina and an apple tv. So, this all week i was doing some search and reading forums but i`ve never seen anybody have this problem yet. I can use my apple tv with my Ipad and Iphone perfectly, but my macbook pro refuses to work. My airplay sign in the right-top side of the screen is keep disappearing and i can`t see my apple tv there. They are both connected to same Wi-Fi and i restarted both, I reset all my settings on both, vs.. Nothing changed so far. My macbook pro and apple tv is up-to-date too. So is there anybody can help me ?

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

I had no success in establishing bluetooth pairing between my iphone and Macbook pro retina after insalling Mountain Lion, any suggestions?

is this a known issue? how do I fix it?

I'm having the same problem. Neither my iPhone 5 or 4s will connect with my Retina Pro machine. The pairing seems to go fine, however when I try to connect to the Mac on the phone, it returns and claims the unit is not supported - and removes the MBP from the list!
This is simply not acceptable for equipment as expensive as these products are.

Macbook Pro Retina not charging, please help!

I recently plugged in my charger, and the green light did not come on. I then clicked on the battery at the top of the screen and it says that it is plugged in but not charging but that the power source is the power adapter. Right now my computer is stuck at 14% when plugged in. Please help!
This is the available inoformation on my battery from my computer.
Battery Information:
Model Information:
Serial Number:          D862287345DDNMGAD
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          511
Hardware Revision:          3
Cell Revision:          1150
Charge Information:
Charge Remaining (mAh):          1170
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          8353
Health Information:
Cycle Count:          125
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          10765
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
AutoPowerOff Delay:          14400
AutoPowerOff Enabled:          1
Current Power Source:          Yes
DarkWakeBackgroundTasks:          1
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
Standby Delay:          4200
Standby Enabled:          1
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
AutoPowerOff Delay:          14400
AutoPowerOff Enabled:          1
DarkWakeBackgroundTasks:          0
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
Standby Delay:          4200
Standby Enabled:          1
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0000
Revision:          0x0000
Family:          0x0000
Serial Number:          0x00000000
Charging:          No
If anyone could help that would be amazing!!

I've noticed the same thing on my 13" rMBP. Plug in the MagSafe 2, and sometimes the light comes on instantly. Sometimes there is a 20 second delay before the charging indicator kicks in. And occasionally, the light has turned off hours after it has been on for awhile.
Anyone else seeing this issue? If it is widespread, it could just be a firmware update to fix.

Macbook pro 15" vs Macbook pro retina 15"

I have recently bought macbook pro retina 15" it has yet to arrive it is still in the processing stage.
I prefer the retina slightly more than the traditional version, however upon reading the image retention issues of the macbook pro retina after I have ordered it.
I am unable to decide whether or not to cancel my order to and buy a normal macbook pro 15" without the retina display.
I want to ask has the after image / ghosting issues of the retina displays been fixed yet in 2013?
This was an issue with the displays made in june 2012.
Right now its 2013 hopefully someone can give me an update on the display issues with the retina model.

Some people have IR problems, some don't. If I were you, I'd just go ahead and take delivery of the Retina model and keep in mind that you have 14-days to return, exchange or get a full refund. There are various IR tests out there but if you don't have signicant IR, I'd just keep it.
Just my 2¢...
Clinton

Macbook pro retina 2013(late)

can i still configure my 13inch 2013 (late) macbook pro retina after I've purchase it?

Current processor is 2.4GHz dual-core Intel Core i5 processor and 8 GB memory. So can I increase it to
2.8GHz dual-core Intel Core i7 (Turbo Boost up to 3.3GHz) with 16 GB memory?

NEW MacBook Pro Retina cracking sound problem

I recently bought a MacBook Pro Retina after using a MacBook Pro for a year. From Day One my MacBook Pro Retina makes a cracking sound from the body on the right side. not acceptable from such a expensive machine. Apple would not replace it! Now I don't know what to expect, but I never expected this. Laptops worth 400bucks are not this cracky. After browsing through i see im not the only one with this problem. The local apple service center said they have checked it everything is fine and it is not damaged, it was a manufacturers defect. Why should I be the victim here?

Resetting the NVRAM/PRAM didn't work. The crackling sound is especially bad around the 4:00 mark in the following Killzone Shadow Fall preview:
http://www.engadget.com/2013/02/20/watch-the-ps4s-killzone-shadow-fall-shared-di rect-from-the-con/
Several songs in the iTunes store, when previewing, also have the same crackling issue.
I'm just glad it's not crackling for every single video or song, at the very least.

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My macbook pro retina F2 key makes a squeaking sound due to heat!?

Hello All,
My brand new Macbook Pro Retina's F2 key makes an awful squeaking sound when i press it.... The sound got even worse when the macbook ran hot and i had to presse the key for multiple times....... Now it seems like even my F3 key is slowly dying when my macbook is under heat stress and i am pressing it.
Does anyone else have this problem? Its really bothering cause its a brand new computer, its still practically warm from the production line..... I called apple and they told me to go to a service centre :-( but i need this machine for my work and a service centre takes the minimum of 10 work days to repair it.........
What can i do....
Kind Regards Cor.

Hi guys, i know exactly how you feel. The rmbp should be perfect, i mean common its a 2300++ system... After i posted the above i deceided to take it to the apple store and let them fix it. I must say they did a good job! I got my rmbp back within 3 days! I think thats very fast.
What they did is they replaced the top case, cause the keyboard and mousepad are fixed to it. Also the battery is so thats brand new as well.
Now everything seems to work properly, i tested every key and searched for scratchtes or any imperfections but all seems ok.
I can only give you 1 advice if your key squeaks, take it back it should be perfect! In my case the squeaking only got worse and i still think it has something to do with the heat of the rmbp cause it came when i was gaming and the macbook got really hot.

Any problems with heat and fan noise on Guild Wars 2 Macbook Pro retina?

I am thinking to start Guild Wars 2 Mac beta on my Macbook pro retina, but i have been reading in different forums that it heats up the system and that the fan kicks off really loud when playing the game. Anyone has any experience on this? Any guild wars 2 gamers please give me some feedback.

I have been playing GW2 for a while now on Beta. The game runs choppier than windows but I think that's because it's a Beta version. I bet after they finish optimizing it things should change, even heat.
As for the heat, it gets super hot. So hot the keyboard gets hot, and when I push in the keys, I feel heat. It's warm enough to cause concern. I don't know if it's bad or not, but the dude at the Apple Genius/Store said, the MBPR knows when it gets too hot and it'll let you know. He said if it plays and nothing is warning me then it's fine. The MBPR won't allow itself to go to catastrophic failure due to heat.
So I took his advice and have played. Just Monday (October 1st 2012) I played for a good 5 hours non-stop and nothing came up so if the Apple Genius guy is correct then I wouldn't worry about it. I do have AppleCare so if something does fail then I will blame the apple genius guy.
It's a fun game, my first MMO, but it's too hard for me sometimes. I don't like that

Macbook Pro Retina crashes after SMC Reset

Hey guys. My macbook pro retina is constantly running its fan at full speed at random times. The fan is always running on high even when I do not have any background apps running. And every time I try to perform SMC reset, my macbook crashes and I have to reinstall OS X all over again. Some other issues are that I cannot update my computer without crashing and having to end up re-downloading the software again. Also, when starting up my macbook on the new Yosemite, the loading bar when logging in gets stuck, which again results in me reinstalling the software or restoring from an old backup. People have suggested replacing the SSD in the computer but I believe it may be the motherboard that may need to replace. I own a Macbook Pro Retina 15" early 2013 running OS X 10.10. And everything is factory when it comes to hardware.

I just bought a new charger and it appears to be working, so looks like that problem was not with my MBP but rather with the charger itself.
I am noticing that my fan is a little quieter now, but still doesn't sound normal. I have looked at Activity Monitor and nothing is using a lot of CPU at all (highest is Chrome at 6%). The MBP does get hot when the fan is going. I have looked at videos for cleaning/replacing the fan, which I think may be a good idea, but I don't have the proper tools at this time. It's something I'll keep looking into.
Also, Chrome and Mail both seem to be working now, randomly, even though I haven't done anything else. It's weird that they both stopped working immediately after I did an SMC reset, but maybe it's just a coincidence?
I will do another SMC and PRAM reset if further problems persist. Thanks for all the help!

Macbook Pro Retina Heat

Hi.
I'm completely new to Mac and OSX but I'm fairly good with computers. Beening building PCs for years and know my way around Windows.
I'm a little concerned with my Macbook Pro Retina and its heat. I understand that its a slim computer and its going to get hot, but it doesn't seem like my fans are speeding up enough to keep the system cool. Even when I'm doing light loads on the processor (Ex. coding a website in TextMate) the system seems to be running fairly hot. Usually it runs around 70C when doing basic internet browsing and text editing. When watching YouTube it runs even hotter! (Around 100 ~ 120C)
The fans seem to max out at 2100 RPM during when it hits those peak temperatures. I opened up TF2 and it got even more hot, and the fans still only peaked at 2100 RPM.
Someone told me to download SMC Fan Control - however from what I can tell it is not completely compatible with OS X 10.8. It does let me set the fan speed however the system doesn't take over when the system is getting hot - at least thats all I can tell; chance are I'm completely wrong.
Anyways, is there something on the software side of things that I can do to increase the cooling of my system? I will probably be buying a cooling pad at some point but if I could increase the cooling more via software that would be great!

Hi there,
What you have stated in regards to the temperatues and fan speeds is a little worrying in my honest opinion, let me explain why.
I have a MacBook Pro with Retina Display, the £1799 model (8gb RAM, 256 SSD), which i use at an elevated position, i bought a griffin stand (really nice actually, i would reccomend it).
I have had it a little over a month, my first 3 weeks with it have been a complete worry.
My rMBP runs between 46C - 60C whilst i'm browsing the internet etc, if i watch a youtube clip, it gets hotter - around 70C (it can get even hotter but it depends on the resolution of the vid) - fans are runing at around 2100 RPM when machine is at 50C ish..
However, when i run games or watch a 4k resolution vid on youtube or do anything that requires the processer to go insane it shoots way up to around 90C (highest i've seen it go is 97C), this scared the **** out of me, how can something get that hot and still be safe? it's 10C away from boiling point! The fans run at around 4000 RPM at this temperature.
I must have called Apple Care about 3 times a week to ask for advice, i was looking for someone to make me confident that this was normal, they told me to take it to a genius bar.
So off i went, the genius told me that he had tried to test it (about 5 times) but was unable to succesfully test the machine as apparently, whenever a new machine is released, there is a period when all the older testing software doesn't work properly (it kept crashing).
What i did find out was that another genius that walked past overheard us, he told me he was playing StarCraft II on it for hours yesterday and it got very hot, around the same temperatures of mine, he said it was perfectly normal as the processor is Ivy Bridge which just runs hotter then normal.
He also said the following:
The fans can go up to a maxmimum of 6000 RPM, this to me meant that i was not pushing it to it's limit as the highest i've seen my fans go is around 5000RPM at 97C.
He simply said not to worry and i quote - "If the fans are running it's nothing to worry about, if they are not - that's the time to worry".
He also said that the system had an inbuilt feature that would shut down the system if it ever got too hot for the system to handle.
The general thing i have realised from my own searching around and visiting/calling apple is that the rMBP is thinner then other laptops and therefore, it will run hotter. The entire case is meant to be a heat sink and is supposed to get hot to help dissapate the heat.
I'm now confident that mine is not faulty - it feels like a weight has been lifted (i treat my rMBP like a newborn hah)
To me, based on everything i've learnt, i would say yours needs to be checked out ASAP, the temperatures are higher then mine and your fans are not operating as they should.
I really hope this helps mate, go and see a genius and get it sorted!
All the best!
Nick

Cleaning heat sink on Macbook Pro Retina after liquid spill... HELP!

Similar Messages

Maybe you are looking for