Cleaning Memory (Blackberry device default cleaner)
Hey folks... I have the Curve 8530 and Boost Mobile is my carrier,,,
In my readings of Blackberry Support or the "Help" part of the phone, I was reading. Information about the Cleaning the content cache and I am very certain that I read that the devices default memory cleaner was not designed for every day use and that a third party app is recommended...
Now... Whenever I am deleting cache history whenever I backout with the Escape key I get a popup appear wich reads "CLEANING MEMORY" .. Now with what I read and with the device using an apparant default or device memory cleaner every time I backout of Browser Options,,, is tha hurting my device using the cleaner for that? I bought the phone new and never changed a setting in that area pertaining to "memory ceaning. Do I need to download a cleaner for that action?
Hi huntmarv,
This article should help explain memory cleaning on the BlackBerry. http://bit.ly/ezYp3M
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
How set default folder Inbox on Blackberry device
Hi.
Does anybody know how to set on BlackBerry device default folder Inbox?
Thank You.
StanislavTake a look at this article to see if it helps:
KB23978 - BlackBerry Desktop Software 6.0 displays calendar as not installed within Organizer
Thanks!
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Dear bros, I have a question which I concern about: How Can I Clean Memory, Cache...And Boost Memory On Playbook (like clean & boost memory on Blackberry phone)? I want to to this because I want my playbook run smoothly.
Thanks all.The PlayBook manages memory through the OS, there's no 'memory cleaner' like on the BlackBerry phones.
In the browser, there are settings to clear cache, cookies and history which do improve the browser performance.
You may want to try and change the PlayBook multitasking mode. Go into Settings - General and change 'Application Behaviour'. Showcase is full multitasking (slower), Paused pauses all programs when minimised and makes the PlayBook save battery and run a little faster.
Hope that helps.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you! -
My Blackberry Device got wet in Salt Water, How to extract the data from its Memory ?
I have forgotten my device in my pocket while swimming in Sea Water. Eventually , the device got water damaged , I've taken out the battery, used the hair drier and still didn't work. All My concern is how can I retrieve the data on my Device Memory. Most important the Media Files (Photos, Videos...etc),
Thanks,photos and vids ar most lilkely on the SD card and youcan get a USB reader to get them if they are not encrypted.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Is it safe to reload your OS using BlackBerry Device Software? (9300 curve)
I'm planning to Reload my OS 6 using BB Device Software to fix the battery problem. Will this be safe? Or is this the proper way on reloading the OS.
here is the link I want to perform : KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...Please help on this.. would greatly appreciate it.
-
Hi anyone can help me how to install blackberry device software to my desktop computer? I already download the installer but i can't install it and what is the meaning of this message
Windows ® Installer. V 4.5.6001.22159
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
when i click my install wizard it always show
Solved!
Go to Solution.Ok, let me suggest you reboot your PC and try running the EXE file you've downloaded again.
I've never seen that message before from the installer file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to get information about limitation Internal Memory on device
hallo ..
have some question here, so please some person able to answer my questions
1. How to get Information about limitation internal memory on device
2. is possible to improve internal memory on Blackberry ( move apps on external memory )
3. any tools to get internal memory activity ?
thanks for this people who joins here, hope we can share more information about blackberry ..In addition...
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
KB05461MicroSD card sizes supported by the BlackBerry device software
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
KB14320How to maximize free space and battery power on the BlackBerry smartphone
KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi
I just got this message yesterday: Your Emitac Mobile Solutions LLC email service is deactivated, Email messages are no longer being sent to your Blackberry device.
And since then, i havent being able to set up more than one email and i subscribed for 4.
I have rebooted\,, sent service books and hard set the phone so many times.
What should i do?
Thank youHi and Welcome to the Community!
From your post, I cannot quite tell if you did all of this, in exactly this way. Hence, with a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Outlook email as the device default calendar
I got my Blackberry at the end of February,and established my Outlook email as the default email for the device calendar and have had no problem sync'ing the calendar and contacts between Outlook and the device using the Blackberry Desktop Software.
A Blackberry core update was pushed and installed on the device recently, and since then, the device could not keep the Outlook email as the email for the device default calendar. Each time when it occured, one of the two things happened: either any appointment I entered on the device would be labeled as Outlook email calendar item, separate from all items of the device default calendar (visible in different color indicator), in which case the added appointmend could not be sync'ed to my desktop Outlook calendar; or all my default calendar items would be reassigned to Outlook email calendar (the color indicator changed to green instead of the default blue), in which case the device would ask to delete ALL appointment items on my desktop Outlook calendar when sync'ing because it couldn't reconcile the default calendar with the Outlook email calendar.
Each time when the problem occurs, I would delete the Outlook email (so that the device had no default email) and then reinstalled it so that the Outlook email was the email for the device default calendar. The sync works after that but only for a short while each time. Then the problem reappeared.
When I sync'ed the device with desktop Outlook, I also noticed that on the device under Setup > Email Accounts, the Synchronization Options for the Outlook email has only the box for "Deleted Items" and not boxes for calendar and contacts, though I don't know whether that makes any difference.
I suspect there must be something wrong in the recent Blackberry core update that is messing up the default calendar when it's linked with an Outlook address. Could you help fixing this problem please.
Solved!
Go to Solution.Hi,
Just to clarify I did not question the VPN connection as being the problem with your email. My point was accessing a networked MS Outlook email account via VPN would I think change the way the sync and reconciliation worked.
The term device default in these calendar discussions can be confusing as "default" is used as a CICAL calendar description and a device calendar description.
The service books could have certainly caused the problems. I would suggest reading this article describing how the device calendar works with items not associated with a CICAL from an email associated calendar. The merge function is not the point, the calendar process is.
Please let me know your thoughts.
Thanks,
Bifocals
KB19240 How to merge multiple calendars into one calendar on the BlackBerry smartphone
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
8900 / Gmail vs Entourage vs 'Device Default' calendar problem
So I've got the 8900, and sync it with my Mac running MS Entourage. I have two email accounts on my 8900: one business, and one gmail.
On my 8900, it looks like my calendar has three input options: Device Default, the business account calendar and the gmail calendar. I only use, or I only WANT to use, the business account calendar for all calendar input and syncing, but it looks like gmail is set as the default (even though from the 8900 the 'Device Default' appears to be a third choice). When I sync with Entourage, I'm getting duplicate calendar entries, both on the 8900 and in Entourage.
Does anyone know how I can set my business account as the default calendar input choice? I would like to do that, or simply remove the 'Device Default' and gmail settings. I've tried going to 'options' from the 8900 calendar but can't seem to find it, or can't figure it out.
Thanks for the help.
MattI was going to post that article but you beat me to it.
I believe this is the only way to accomplish this on a BlackBerry
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Help! How do I get "device default" calendar items on my Outlook calendar?
Help! Everything was going fine until yesterday, and all of a sudden all of my items in Outlook turned to "device default" items in my Blackberry and they have moved off my Outlook calendar. HELP!
Hi there!
Ummmm...this does not sound like an issue regarding AppWorld...can you post your specific device model (and device OS level, while you are at it...plus carrier and your email integration method -- BES or BIS or Desktop Redirector) and we'll have the thread moved over to the appropriate forum?
http://supportforums.blackberry.com/rim/?category.id=Smartphones
Thanks!
Message Edited by sdgardne on 07-10-2009 09:22 AM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Driver to access a memory mapped device
Hi,
I've got a memory mapped device, but the OS (Solaris 10) doesn't let me access it in user space without a driver. So, I need to write a driver to bind the driver to my device at location 0x7fff00000000. I've followed the Device Driver Tutorial and examples on Sun's website, and came up with the following code. But when I mmap the driver into user space, the device at 0x7fff00000000 is not accessed at all. So, I believe there is a problem in probing and attaching the device. Could you please take a look at my code and tell me what I'm doing wrong? I'm new to device drivers. Thank you.
static int
foo_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
int instance = ddi_get_instance(dip);
struct foo_state *fsp;
switch (cmd) {
case DDI_ATTACH:
if (ddi_soft_state_zalloc(foo_state_head, instance)
!= DDI_SUCCESS) {
cmn_err(CE_WARN, "Unable to allocate state for %d",
instance);
return (DDI_FAILURE);
if ((fsp = ddi_get_soft_state(foo_state_head, instance))
== NULL) {
cmn_err(CE_WARN, "Unable to obtain state for %d",
instance);
ddi_soft_state_free(dip, instance);
return (DDI_FAILURE);
if (ddi_create_minor_node(dip, "foo", S_IFCHR, instance,
DDI_PSEUDO, 0) != DDI_SUCCESS) {
cmn_err(CE_WARN, "Cannot create minor node for %d",
instance);
ddi_soft_state_free(dip, instance);
ddi_remove_minor_node(dip, NULL);
return (DDI_FAILURE);
fsp->instance = instance;
fsp->dev = dip;
ddi_report_dev(dip);
return (DDI_SUCCESS);
case DDI_RESUME:
return (DDI_SUCCESS);
default:
return (DDI_FAILURE);
static int
foo_devmap(dev_t dev, devmap_cookie_t handle, offset_t off, size_t len,
size_t *maplen, uint_t model)
struct foo_state *fsp;
int error, rnumber;
off_t regsize;
/* Set up data access attribute structure */
struct ddi_device_acc_attr foo_acc_attr = {
DDI_DEVICE_ATTR_V0,
DDI_STRUCTURE_BE_ACC,
DDI_STRICTORDER_ACC
fsp = ddi_get_soft_state(foo_state_head, getminor(dev));
if (fsp == NULL)
return (-1);
/* use register set 0 */
rnumber = 0;
/* get size of register set */
if (ddi_dev_regsize(fsp->dev, rnumber, ®size) != DDI_SUCCESS)
return (-1);
/* round up len to a multiple of a page size */
len = ptob(btopr(len));
if (off + len > regsize)
return (-1);
/* Set up the device mapping */
error = devmap_devmem_setup(handle, fsp->dev, NULL, rnumber,
off, len, PROT_ALL, DEVMAP_DEFAULTS, &foo_acc_attr);
/* acknowledge the entire range */
*maplen = len;
return (error);
static int
foo_segmap(dev_t dev, off_t off, struct as *asp, caddr_t *addrp,
off_t len, unsigned int prot, unsigned int maxprot,
unsigned int flags, cred_t *credp)
return (ddi_devmap_segmap(dev, off, asp, addrp,
len, prot, maxprot, flags, credp));
}Hi java_user,
There are no EBIU VIs. You will need to use C code for that part of your application.
Mike Lyons
National Instruments
http://www.ni.com/devzone -
Hearing aid compatibility being ignored as new Blackberry devices are released...
I'm very disappointed in both Research in Motion and the cell phone carriers for making the newer Blackberry devices all M3 and not M4/T4.
M4/T4 is the best hearing aid compatibility rating. M3 is just average.
In the past, Blackberries have been M4/T4 rated and I've been very happy with the company for their support.
However, the newer models being released, including but not limited to the Curve 9700 and the Bold 9650 are all M3.
The Blackberry 8830 was M4/T4, then its successor, the Tour 9630 was M3, and sure enough the successor of that, the Bold 9650 is M3.
The Storm (both versions) devices are also M3.
I was researching the phones released by Blackberry; all new phones are M3. None are M4. However, if you are content with an older model, like the 8830 for example, they are still sold by the cell phone carriers.
The cell phone carriers work with RIM to determine how high the hearing aid compatibility rating should be. Cheaper materials lead to lower ratings. If the cell phone carriers and RIM used higher quality hardware, they could easily get the M4/T4 rating!
I've heard that the higher quality hardware really is not that much more.
These companies need to realize that M3 is not enough and that M4/T4 is the rating they should be striving for when developing phones!
I prefer newer models when I am eligible to upgrade because their onboard memory is often faster, their cameras are often better, and support for technology is better, etc.
So, I am just so disappointed that Blackberry has decided to back away from M4/T4 and offer M3!
This is unacceptable and both RIM and the carriers need to know this!
I have written my carrier to let them know about this. Hopefully, the Blackberry devices will start being M4/T4 again, which they should be!Hello and Welcome to the Forums!
You have some excellent points and suggestions. I would like that those don't miss the mark in reception by RIM. You see, these forums aren't a vehicle to communicate to/from RIM. Rather, these are user-to-user forums where kind souls volunteer to help out other kind souls as best they can. But, I have heard that RIM accepts constructive suggestions at [email protected]
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Updated my phone, now my outlook calender has split into device default, then my email address...
Hey guys, anyone can help me here? It's actually my bosses phone, we have synced to our Outlook program, so any appointments I put into the calender on my computer are updated into her Blackberry calender. However, we did an update software, as was prompted from the desktop manager, and now for some reason, although all appt's show up in the actual caleder, the display page (Dimension Today) only shows the reminders for the one calendar... I need it to show all the appointments. It looks like somehow the new additions from the date of the sync are somehow on a different calender now? Please help!!!!!
Hi,
Just to clarify I did not question the VPN connection as being the problem with your email. My point was accessing a networked MS Outlook email account via VPN would I think change the way the sync and reconciliation worked.
The term device default in these calendar discussions can be confusing as "default" is used as a CICAL calendar description and a device calendar description.
The service books could have certainly caused the problems. I would suggest reading this article describing how the device calendar works with items not associated with a CICAL from an email associated calendar. The merge function is not the point, the calendar process is.
Please let me know your thoughts.
Thanks,
Bifocals
KB19240 How to merge multiple calendars into one calendar on the BlackBerry smartphone
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Calendar Entries change to Device Default rather than associated e-mail address when upgraded
Hi,
I upgraded my Curve 8330 software to the latest. Once this was done, I noticed my calendar entries are now showing Device Default in the Send To field. When I try to sync with my Outlook Calendar (2007), it won't sync these particular entries. In actual fact, the same entries that are in my calendar (that were sync'd prior to upgrade) contain many of the entries that were associated with the e-mail address. So, I got duplicate entries on my device.
I tried going the route of doing a 1 way sync from my device to Outlook, but it, it wasn't recognizing the Device Default entries. And I can't go the route of a 1 way sync from Outlook to my Device since I have since made many changes on my device.
What can I do to get the Device Default calendar entries to sync (even 1 way sync) to my Outlook calendar? I have hundreds of entries and I don't want to have to redo all of this each time I upgrade. (Not even sure why my calendar entries flipped like this on my Curve to give me this problem in the first place).Hi and welcome to the forums!
1. Take a look at options-advanced options-default services. The CICAL (calendar) and CMIME (messaging) should the email address originally associated with your BB.
2. Entries in the device default will not sync with Outlook.
3. Read this KB article paying particular attention to Cause 3. http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB16063&sliceId=SAL_Pub...
Post back with any questons.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.
Maybe you are looking for
-
Apple Mobile Device (Recovery Mode) and frozen "Connect to iTunes" screen
I have had my iPod Touch for about one year and have synced with my PC (XP) without incident during that time. Yesterday something happened while connecting with iTunes and I have not been able to find the solution on this board or others. Maybe the
-
Recording from mic, not sound card
Hi there. Relatively new to Audition so trying to get my head around it! I'm using Adobe Audition 3.0 and i'm mucking about with it basically to get some experience for my uni project. I'm trying to compile and edit together a collection of audio cli
-
Can you please help me ? thank you
-
It seems that I always end up writing over, or losing my debug swf's that Flex Builder creates. Unfortunately, when this happens it seems like there is no way to ever fix it. If the perfect swf's aren't in that folder then it just opens then on compi
-
Im trying to download itunes it says i need quicktime that keeps coming up with error saying to go to c;/windows/installer/quicktime.msi what does this mean