Cleaning print head HP Officejet 4315 All-in-One Printer support

Hi,
I'm having a problem with my 
HP Officejet 4315 All-in-One Printer.
I'm using Windows 8 and have topped up the ink levels. The printer is printing with white lines which I understand indicates that the print heads need cleaning.
All the advice I can find online says that to run a print head clean from your computer you need to go the printer in control panel > select printer properties > then click on the 'maintenance' tab.
Using Windows 8 it appears there is no "maintenance" tab and I cant find any option to clean print heads elsewhere on the properties tab!
Not sure where to go from here?
Many thanks for your help in advance.

That is the only way you can clean the ink cartridges. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

Similar Messages

  • Print Head for our C7280 All In One Printer

    We have a C7280  All in One Printer in the office/  Our repairman told us to order all new color cartridges for it before he could fix it.  We did that, however, today he told us the print head was bad and that we would be better off to buy a new printer than fix the C7280.  He told us he could not get parts for our printer anymore.   If it is the print head, can this printer be fixed? 

    That is the only way you can clean the ink cartridges. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good luck.
    I worked on behalf of HP.

  • HP Officejet 4315 All-in-One printer problem -

    My printer jammed, I cleared it out, I replaced color ink cartridge, black ink cartridge is fine, and jobs just queue up.
    I can print the test page, the alignment test checks out ok.
    Still cannot print any jobs.
    Thanks for any help.

    That is the only way you can clean the ink cartridges. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good luck.
    I worked on behalf of HP.

  • My HP Officejet 4315 All-in-One does not print

    My HP Officejet 4315 All-In-One printer does not print althoug it is connected to my laptop and working properly
    The dial shows the word FAX instead of PRINT.  How can I remove the word FAX? because I think this is the prolem
    Any one with info pls email me at:[edited email by moderator]  Thanks,  pedrodomenech

    Hello  @pedrodomenech , and welcome to the HP Forums, I hope you enjoy your experience!
    I can see you're running into fax/print issues.
    I would love to help with that, but I need a little information to try and help you first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Printing from 10.6.6 to an HP Officejet 6210xi All-in-One printer

    I have a brand new iMac - 27-inch, 3.2Ghz running 10.6.6 - connected to an older printer, an HP Officejet 6210xi All-in-One printer, and I am unable to print.
    Running the Printer System Preferences sees the printer via USB, and I install the print-drivers that come with Snow Leopard, but absolutely nothing prints. Trying to print just produces a useless "Error" error-message in the print-queue window, with no detailed explanation as to why.
    I have tried downloading and installing the latest MacOS print-driver from HP, but this doesn't help. I can't print a single page.
    I assume I should be using the print-drivers that come with Snow Leopard, but I have no idea why printing does not work. I can disconnect the USB cable from the new iMac, and connect it to my older iMac, running 10.4 and printing works fine. So I know that the USB cable and printer are OK. But if I move the USB cable to the new iMac, printing does not work at all.
    I have tried different USB ports on the new iMac, I have disconnected all USB cables and restarted the iMac, then re-connected only the USB cable to the printer, but no luck.
    Any ideas as to what else I can try?
    Thanks,
    --- Christer

    When you say you have installed the latest print driver from HP do you mean from the HP site or do you mean using Software Update/from Apple site?
    If you mean the All-in-one package that sits in your app folder try uninstalling that, (there is an uninstaller in it), and then try again with OSX.
    I think when you plug in your machine the Mac should recognise your printer and ask if you want to download the appropriate SW.
    So, my steps would be.....
    1). Uninstall the HP All in one.
    2).Restart.
    3). Plug in to Mac, (and power), and switch on 6210.
    4). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
    ......if still no joy;
    5). Re-apply combo updater.
    6). Plug in to Mac, (and power), and switch on 6210.
    7). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
    8). Come back and curse/thank me, then go back to the HP site and see if a more up to date package exists

  • HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

    HP OfficeJet 6310 All-In-One printer  on a iMAC  OSX version 10.9.5 system
    Hello,
    As I don't print in color much but had need to I discovered my printer not printing in color.  I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled).  The printer still won't print color but it advances the paper as if it was printing - just no ink on paper.  I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities.    The test page print does not show color either.   I have no error messages.  Don't know what else to do.
    thanks
    DH

    Hi there @dhengr!
    Thanks for contacting the HP Forums!
    I can see your having a print quality issue with your HP OfficeJet 6310.  I should be able to provide documentation that will help locate a resolution.  You mentioned you have already tried another  HP95 tri-color cartridge with no resolution.  I also noticed you said that the quality report from the printer also has no color ink.  
    If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer.  I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer.  If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone.  They deal with hardware warranty and replacement options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html 
    Have a great weekend and thank you again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

    After operating a HP Officejet 4500 All-in-One Printer - G510g  from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
    The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
    The www.hp.com site offers a download of a full driver for the  printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
    There are no options to uninstall, either in control panel/printers or in control panel/software.
    Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
    I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
    I have also tried the HP Printer Installation Wizard. The result is similar.
    Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
    Thank you
    This question was solved.
    View Solution.

    Hello @monc , welcome to the HP forums!
    I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
    I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software  
    Restart the PC afterwards
    Perform a Clean Boot
    Restart the PC again
    Download and install the printer again:  HP Officejet Full Feature Software and Driver
    If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet 4315 All-in-One

    I have an HP Officejet 4315 All-in-One that I bought several computers ago.  I now have 2 computes that have Windows 8.1 on them, and the installation disc is for Windows 2000 and Windows XP.  The installation disc says that my system doesn't have what it takes to load this printer, and I can't seem to find a driver that will work.  I have run the HP software that checks your printer, and it prints and scans on the test run.  It will scan off my computer and allow me to save to my computer.  It will not print what I personally scan.  It makes copies independent of the computer. 
    I think I need a driver.  I don't understand why it prints on the test run by HP, but won't do it off my information on my computer.  Any ideas? 
    It is out of warranty and basically there isn't anything wrong with it except it doesn't go with Windows 8.1.

    Hi @dgclmn51 
    Although there is no full feature software and driver for the officejet 4315, you can still use the printer with the computer.
    Please use the following document to learn more; Install a Windows 8 Driver with Windows Update.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP OFFICEJET J4580 ALL IN ONE PRINTER

    I AM STAYING AT MY DAUGHTERS WITH MY LAPTOP, AND NEED TO KNOW HOW TO INSTALL HER HP OFFICEJET J5480 ALL IN ONE PRINTER, SO I CAN PRINT WITHOUT  HAVING TO E-MAILING TO MYSELF, AND THEN PRINTING OFF THE E-MAIL..I DON'T KNOW A LOT ABOUT COMPUTERS OR PRINTERS, SO PLEASE MAKE ANSWER AS BASIC AS POSSIBLE

    Hello HOWIERD. I understand you would like assistance on installing the printer on your daughter's computer. HP contains this website which will assist you with installing the printer: http://www8.hp.com/ca/en/support-topics/printer-installation/install-download-printer-drivers.html
    Please let me know if you found this useful or not. If you require further assistance, I will do my best to assist you.
    Mario
    I worked on behalf of HP.

  • HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1)?

    Printer Model, Notebook or Desktop Model Number: HP Officejet J4680 All-in-One Printer
    Operating System (including service pack revision): Windows 7 64-bit Home Premium Service Pack 1
    Error messages: None
    Recent hardware or software changes made to the system: None
    Problem Description: HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1) and a new printer appeared: HPD8D625 (Officejet J4680 series).  I don’t know how this all came about or why?
    I used the HP HPD8D625 for a while but it took a long time to began to print and only buffered a small amount. I went back to my stand by printer, but know my wife want to use the wireless network to do her printing, so I have to fix it.
    Connection Method: Wireless
    Diagnostic Summary
    Troubleshooting performed: Yes
    First Wireless Network Report:
    Everything: Passed
    Signal Strength: Excellent
    Other networks detected matching your network name (SSID): No
    Configuration Summary
    Network Name: Correct
    IP Address: Correct
    Config Source: DHCP
    Communication Mode: Infrastructure
    Authentication Type: WPA-PSK
    Encryption: Automatic (AES or TKIP)
    Second Wireless Network Report:
    Network Name: Was different
    Of course that disrupted the whole report.

    BH
    Thanks for responding. What I did today was hard wire the printer to computer. then was able to get my original printer icon back and it was set as the default printer. I deleted the other icons, they were ghosted  and I didn't what to use them. the one was a online printer going back to HP. Now I have to got my son to fix the remaining problem I have, with my messing around I somehow change the Network Name on the printer. He is a computer eng working on high tech cameras and also is the administrator of my machine. He has me locked out of administrative rights and for good reason, I wrecked a couple computers and when he built this one for me that was the rule. There is a little info that I don't have to finalize the last step in changing the Network Name back. I have run the printer from the printer control panel and it did find the correct Network and Network Name but is seemed like that is far as I could go. So I'm not that far from completing this project.
    LH

  • HP Officejet 4630 all-in-one printer Cancels Print in Middle of Job

    Hi,
    I recently bought an HP Officejet 4630 all-in-one printer, and it automatically cancels jobs in the middle of printing. The computer I am using is an HP Envy dv7 with 64-bit Windows 8, and I am printing over a wireless network connection. My computer receives an error that HP Officejet 4630 series couldn't complete print and the printer simply says canceling. I have tried all the steps in the troubleshooting sections, both for printing issues and network connections. I've uninstalled and reinstalled the software multiple times, I've established a manual IP, and everything else, but nothing seems to work. It also seems to have the issue when using HP ePrint. It happens in all sorts of programs and formats such as word, pdf, and html. Unfortunately, I did not receive a USB cord, so I can't see if that will fix the problem at all. Hopefully somebody can help me with this, otherwise it's obvious that there's a problem with the actual printer I got and I'm going to have to get something else.
    Thanks
    This question was solved.
    View Solution.

    This is how I fixed it:
    Find out what the IP address is that your printer is using. 
    Then go to control panel and click on "View Devices and Printers".
    Look for your printer an right click.
    Click "Printer Properties" and a new screen will open.
    Along the top you will see some tabs. Click the one that says "Ports"
    Click "Add Port"
    Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen will open.
    Click "Next"
    Type in the IP Address of your printer and click "Next"
    Your computer should find your printer.
    Click "Apply" and your printer should work correctly.

  • I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found.  How can I get connected?

    I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro.  When I try to print and email I get NO AIR PRINTER message,  How can I connect my printer to my IPad and print emails.

    Welcome to Apple Support Communities.
    If you're using the Printer Pro app, you're not going to use AirPrint services.
    They are not the same thing.
    Are you using the 'Open In' option to get the email into Printer Pro for printing?
    http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
    Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
    Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

  • HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

    I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie  ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ?  Loooking for any answers ! Thank Yopu ,JS

    Hi jspin3,
    I'd like to help.  For now, I would hold off on the uninstall and reinstall.  Can you answer some questions?
    Is the printer connected by USB, Ethernet or wireless?
    Do you get any error messages?
    Does a blank page come out or do no pages come out when you try to print from the computer?
    If you put a document face down on the scanner glass, are you able to make a photocopy?
    Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge?  Click Here 
    If you print a  Self Test Report,  do all of the colors print?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

  • My PC can't stand the connection to HP Officejet 4630 all-in-one printer

    Hi everybody,
    I got a HP Officejet 4630 all-in-one printer, i manadge to connect it to the network. I select a static IP and i can reach the printer through the browser.
    I can add the printer to the PC, the system can find it after few second od scannig, and than i can print a test page.
    The problem is that if I reboot the PC or the printer, or both, i can' print no more.
    The icon of the printer in the "device and printer panel" is blurred with the green thick, but i can still reach the print through the browser and i can print with the ePrint.
    If I use the "problem solving" service of Windows, it can't find any problem. But i can't still print.
    I don't know what to do, it seems a problem of the computer (i even tryed to turn off the firewall but it doesn't change anything)
    Is there someone that could help me?
    Thank you so much

    Hi @poporni,
    Welcome to the HP Forums!
    I noticed that your HP Officejet 4630 keeps losing the wireless connection on Windows 7. I am happy to look into this connection issue for you!
    Please, take a look through this guide, Printer Does Not Maintain Wireless Connection.
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend, our HP Wireless Printing Center - Troubleshooting Issues website.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Can i use my android to print from HP Officejet J6450 all-in one

    i have downloaded the application from android to print  using my android phone...is the ...HP Officejet J6450 all in one printer capable of doing this ....or am i a dreamer?

    Hi,
    Unforunately your printer model is not supported the HP ePrint Home & Biz app.
    You may find any of the supported products listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01619067&lc=en&dlc=en&cc=us&product=3857218#N34
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for