Cleaning scratches and blemishes in old cine film

I have had lot of precious old cine film transferred to DVD for importing and editing in Final Cut Express. I am looking for a tool or plug in which will enable me to clean up the film to reduce the inevitable scratches that have resulted from 40 years passing through the film gate.
I don't want to have to deal with each farme individually - any ideas welcome

You could try some of the Too Much Too Soon free plugins from Mattias Sandström. Check out Scratch Removal, Smart Noise Reduction, and Hair Removal. It may still be more work than you want to do, but it may help.
Also, if your budget allows, you may want to consider Adobe After Effects with Film Fix

Similar Messages

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

If the bank account permits, I suggest getting a 1 TB SSD anyway. One cannot have too much storage.
Unless you are having issues with your current installation, a 'clean' install is not necessary. It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap. The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
Ciao.

I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

Buy an external USB hard drive and copy your data to it. Either that or burn them all to single or double layer DVDs (depending on amount of data you have). Or if it's really a small amount, consider putting it all on a USB memory stick.

My iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

my iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old

Braunzoes wrote:
my iPad screen is not responding, ...
Try a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Braunzoes wrote:
... whats the best way to clean it ...
How to Clean Apple Products
http://support.apple.com/kb/HT3226
Braunzoes wrote:
... its 2 days old
iPad User Guide iOS 6

I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be pa

I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be paying twice for each SMS sent. Help please

Wipe iPhone/iPad/iPod touch clean
There are a few steps to do:
Switch off iMessage in Settings > Messages
Switch off FaceTime in Settings > FaceTime (iPod touch 4th Generation or later, iPhone 4 or later and iPad 2 or later)
Delete iCloud in Settings > iCloud > Delete Account
Finally Settings > General > Reset > Erase All Content and Settings.
Un-register your device: https://supportprofile.apple.com
Now you can sell/give.
Now, you should get her a new Apple ID to sign in the options above.

Cleaning PE4 and deleting mcdb files

Hi
I have had problems with PE4 giving the "premier elements.exe has stopped working message" about 75% of the way through burning a project to folder or DVD.
I have followed all the advice on here, and followed advice from adobe technical support but all to no avail.
Originally I had the problem on a previous PC. I now have new Dell XPS420 and transferred my old files using microsoft backup/restore and the problem has transferred along with all the files. My projects burn fine on a friends PC so I know that the problem is not with the project itself.
Anyway to cut a long story short adobe have sent me a copy of PE7 to try. Before install it I want to clean all the PE4 files off and have a clean installation. I have uninstalled PE4 and then done a simple file search on the word "premier". This reveals lots of files left on my system. The bulk of these have extension .avi.mcdb. adobe tech support gave a fairly vague answer on whether I should delete these.
Can anyone advise what .mcdb files are, and whether I can safely delete them.
Also I have the following files left. Can I safely delete these also?
workingset.prsl
tempworkingset.prsl
notifications.dat
preferences.dat
cache.dat
entry.dat
entry0.dat
entry1.dat
entry2.dat
Many thanks
Paul

You can clear all the files present in the "Application Data\Adobe\Premiere Elements\4.0" folder.
These have preferences files and some presets files that you must have created during the editing in PRE4.0 (Note: you would loose this if you delete this)
Also, the 'mcdb' files i think have info about the info about a particular video and corresponding audio linked to it, I think its safe to delete these.

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

My iPad 2 smart cover keeps making scratches and damages my iPad

Help this smart cover scratches and damages my iPad 2
It started out fine when I got it but after a while it got dirty and well u know the rest

Agreement with skyupi. To clean mine, I just got my hands soapy and rubbed it on both sides. Rinse it off and I'd set it to dry. Cleans real well.

Clean install and transferring applications

I just bought a brand new MacBook Pro a year and a half ago with the top performing quadcore i7 with 8GB of RAM. Ever since I upgraded to Mountain Lion from Lion. I have had some serious performance issues. I have already done a time reinstall and still have the same performance problems, which is pretty poor and a very hot core. I have read that doing a clean install and transfering file from the TM results in noticably better performance. I have never done this before so I like to know the risks and can I transfer my applications (pages, keynotes, word, powerpoint, ect.)

Yes, that is an option although you will need to take care you do not restore from backup something that is the direct cause of your problems.
All your applications may be reinstalled from the App Store or installation DVDs depending upon where and how they were purchased.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Clean install and Mail/itunes

I want to do a clean install and wipe my hard disk etc but I then like to put on my old mail and itunes library etc. What do I have to do that i.e. what folders do I need to bring back from Time Machine. And where do I put them etc?
Thanks

I had to reinstall Leopard for reasons unrelated to Leopard. When I did this reinstallation, the vertical quirk went away. Very strange.

My macbook pro got so many scratches and dents, i just want to know that how i can replace it with the new one?

my macbook pro got so many scratches and dents, i just want to know that how i can replace it with the new one?

Sell the Old one... Buy a New one...

Recently purchased a new imac and thought my old iPhoto library transferred over. It wasn't. And I can't get iPhoto to open on my old mac ("can't open your current version of iPhoto using this version of iPhoto. You have made changes to your photo lib ...

I purchased a new imac (4G, OS X 10.6.8) in Feb 2011 and thought my old iPhoto library transferred over. It wasn't. And I can't get iPhoto to open on my old mac. It says, "can't open your current version of iPhoto using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto". I don't think my old mac will support the newer version of iPhoto so I feel like I'm stuck (this is why I got a new mac -- cheaper than upgrading all my software, etc). Help! I really need to get to my old photos, and no, they are not backed up anywhere. Thanks.

You have two options:
Run the Library on a machine that has the same version as the machine that was stolen.
or
Recover the files from this library and start over from scratch.
To recover the files:
Go to your Pictures Folder (or whereever you have the back up) and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Your originals are in the Masters folder.
Note this will only recover your photos as imported from you camera.
Regards
TD

HT3728 how do i reset up my macbook username and password the computer has been cleaned out and reset to original factory settings

I just had my macbook pro cleaned out and restored to it's original facory settings. i cannot access set up assistant to configure my username and password for the computer. it does not recognize my old username and password and I can't find where to enter this information.

Unless you erased the drive then reinstalled Mavericks you will not see the Setup Assistant to configure your initial admin account. I have no idea just what you did. But to reset to factory state means you had to first install the version of OS X that came with the computer on the gray labeled DVDs. For your model that would have been a version of Leopard. If you have a Snow Leopard DVD then you can use that instead. The process is:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Once you have 10.6.8 running you can enter the App Store with your Apple ID and re-download Mavericks to upgrade to 10.9.2.

Convert old 8mm film to what 'format' to edit in iMovie?

I have selected a service to convert and save my families old 8mm film to a hard drive (which I will be supplying). I would like to import the movies (files) from the HD into iMovie for editing and eventual burn to DVD. What format should the service save the files in? Quicktime .mov? or something else? The service lists: Raw DV or AVI Type 1 or Type 2 or Type 2c or Matrox AVI or Avid DV OMF.
Mac G5 Mac OS X (10.4.9) <<br>
Powerbook G5 Mac OS X (10.4.9)

Hi Tyler!
Of the options you list I would choose 'Raw DV'. iMovie is designed to handle a DV stream @ 13GB per hour, for editing and transfer to iDVD.
But ask the vendor to confirm that his 'Raw DV' is designed for transfer to iMovie 6 on an Apple Mac, and before he loads up the hard drive you are supplying make sure that it has been formatted as Mac OS Extended (Journaled).

Cleaning scratches and blemishes in old cine film

Similar Messages

Maybe you are looking for