Cleaning up audio causes "wind tunnel" effect - how to fix?
I typically use Soundbooth to clean up any problems in audio, like hiss or buzz/hum noise. I just use the default "Clean Up Audio" tool on the left side when I open the program. It seems, though, when I adjust the levels to anything decent to get the problems out of the audio, inevitably I get a sort of "wind tunnel" effect in the sound. Does anyone know how I can prevent this in the future?
http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com
Similar Messages
-
Help out? i was watching a 43 min episode and it works fine in the first like 20 minutes but later on in freezes, it turns the screen completely black afterwards, there's still sound, but theres no video, the screen is completely black while audio continues to play. How to fix this? and what were the possible causes for this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete/unsunc he video and then resync/redownload
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I am burning my mini dvs to one step idvds.Some of the dvds have no audio while others have...how to fix this audio problem?
I'm guessing then, that you made this question from your iPhone, since you say the iPad has no Wi-Fi? You need to log into your iTunes account and update your financial information, however you can get into the iTunes Store.
-
Help with "Error syncing Audio and Midi" message. How to fix?
Hi,
I'm running Logic Pro 7.1 on a G5 Dual 2.5 PowerMac. My audio interface is a Digidisign Digi002R, and my MIDI interface is a MOTU Fastlane. Up until a few days ago everything was working fine. I didn't install any new software or anything.
All of a sudden in any Logic session I open (new or saved) I get all kinds of artifacts that sound like they're associated with sample rate problems.
True to form, on playback after 4 or 5 seconds a message comes up telling me that there is an error syncing audio and midi. It tells me that a sample rate of 88209, or 88213, or 88207 (each time it's different) was detected, and that there is a conflict between Logic and my external device.
My Digi002R is set to 44.1, and Logic is set to 44.1 as well. I have no idea where this problem came from.
The only thing I do know is that I've been using the Peachtree Press Apple Pro Training Series to study for my Level 1 Logic certification. it comes with a CD with Logic sessions to use with the text. The CD comes with a Logic Epress Demo but I didn't download that as I've already got Logic Pro. I dragged those session files to my desktop, and the problem occured for the first time when iopened up that first session from the CD. After that, every single session has this problem and I have no idea how to fix it.
Sorry for the incredibly long message, but can anybody help?
Thanks
PowerBook G4 15", PowerMac G5 Dual 2.5 Mac OS X (10.4.7)Hey,
Thanks. I appreciate the help, but I've tried all of that. I just don't get it. I've unplugged everything, I've shut down, powered down, relaunched everything a dozen times and the problem doesn't go away. I know that the problem is with Logic because the interface works perfectly fnie with everything else, from Pro Tools to iTunes.
I'm having Logic Pro 7.2 shipped to me so I'm hoping that installing that will reset everything, but until then I can't do anything in Logic.
Anybody ever encounter anything like this? -
Can you help me figure out what is causing the panic and how to fix it?
I installed OS X Mavericks and now my iMac is turning itself off/on with an error continuously. I did the Etrecheck and this is what I got-
EtreCheck version: 1.9.12 (48)
Report generated August 7, 2014 at 10:51:38 PM EDT
Hardware Information:
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:32:23
Disk Information:
ST3500418AS disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (37.41 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.devguru.driver.SamsungACMControl (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.14 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.14 - SDK 10.6) Support
Problem System Launch Daemons:
[failed] com.apple.ucupdate.plist
User Login Items:
iTunesHelper
uTorrent
KiesAgent
fuspredownloader
TmLoginMgr
Internet Plug-ins:
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 11.2.202.228 Support
AdobePDFViewer: Version: 10.0.0 Support
Flash Player: Version: 11.2.202.228 Outdated! Update
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
1% WindowServer
1% fontd
0% identityservicesd
0% imagent
Top Processes by Memory:
197 MB Finder
152 MB Safari
152 MB com.apple.IconServicesAgent
78 MB WindowServer
74 MB Dock
Virtual Memory Information:
1.34 GB Free RAM
1.91 GB Active RAM
225 MB Inactive RAM
541 MB Wired RAM
308 MB Page-ins
0 B Page-outs
Also-
Thu Aug 7 22:18:08 2014
panic(cpu 1 caller 0xffffff8027c526cf): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.110.17/osfmk/kern/zalloc.c:461
Backtrace (CPU 1), Frame : Return Address
0xffffff80c16b3ca0 : 0xffffff8027c22f79
0xffffff80c16b3d20 : 0xffffff8027c526cf
0xffffff80c16b3d80 : 0xffffff8027c51dc9
0xffffff80c16b3e80 : 0xffffff8027c2aa3f
0xffffff80c16b3eb0 : 0xffffff8027fe334d
0xffffff80c16b3ef0 : 0xffffff80280227a0
0xffffff80c16b3f60 : 0xffffff8028040777
0xffffff80c16b3fb0 : 0xffffff8027cf3c38
BSD process name corresponding to current thread: iCorePluginMgr
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x0000000027a00000
Kernel text base: 0xffffff8027c00000
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 99258199784
last loaded kext at 38556280668: com.apple.driver.AppleBluetoothHIDKeyboard 170.15 (addr 0xffffff7fa9130000, size 24576)
loaded kexts:
com.trendmicro.kext.KERedirect 1.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleBacklight 170.3.5
com.apple.AMDRadeonX3000 1.2.4
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelMCEReporter 104
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.6f1
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOAcceleratorFamily 98.22
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: iMac12,1, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
Bluetooth: Version 4.2.6f1 14216, 3 services, 23 devices, 0 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST3500418AS, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Internal Memory Card Reader
USB Device: IR Receiver
Thunderbolt Bus: iMac, Apple Inc., 25.1I did this and it seems to have worked ....from this post My MacBook Pro keeps restarting after I downloaded the OS X Mavericks update.... Help me asap
el_manceboApr 3, 2014 11:30 PM
Re: My MacBook Pro keeps restarting after I downloaded the OS X Mavericks update.... Help me asapin response to el_mancebo
Comn! Stop installing sh*t:
com.trendmicro.kext.KERedirect 1.0.0
com.paceap.kext.pacesupport.snowleopard 5.8
com.seagate.driver.PowSecLeafDriver_10_5 5.2.6
com.seagate.driver.PowSecDriverCore 5.2.6
Don't install software that interferes with your system, like drivers antivirus. This low level software if fails make your system down.
MacOs has everything you need its complete, it has backup systems, antivirus system, internet security, so no need for low level thing.
In safe mode your mac don't load all this sh*t and that's is why it runs.
In finder menu go / go to the folder paste this:
/Library/StartupItems/
This must be empty, delete everything you find there.
In finder menu go / go to the folder paste this:
/Library/Extensions/
This is what i have in that folder, it may vary depending of the mac hardware:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
If you see something with resemblance to trend micro, pace or seagate, trash it.
Trash everything inside this 3 folders:
/Library/LaunchAgents/
~/Library/LaunchAgents/
/Library/LaunchDaemons/
If you keep not finding the ofending software, look in this folders, but with care, this are core system files so if you trash something needed you must reinstall the OS:
/System/Library/Extensions/
I have 226 extensions there.
/System/Library/LaunchAgents/
/System/Library/LaunchDaemons/ -
Veetle is no longer working with firefox, any idea why, or how to fix it??
As of two days ago, Veetle channels no longer appear using Firefox browser v. 8, yet seem to work perfectly fine with Google Chrome. Although similar issues have been raised in previous questions they (1) deal with earlier versions of FF, or (2) I have already attempted the posted remedies to no avail. Any idea what is causing the problem, and how to fix it? Furthermore, in your "educated guesses" below, you don't show the plugins I have for Veetle, although I do have them.
Right-click on any blank space on the Veetle page. A dialog box will appear, at the bottom will be listed "View page Info." Clicking on "View page Info" brings up a Firefox dialog box with the following tabs: General, Media, Permissions, and Security. Under the Permissions tab there are six functions listed that may be "allowed," or "blocked." Inspect the function for "Set Cookies." If this setting is checked "block," channels will not be displayed in Veetle. In order to recover the channels, "Set Cookies" must be checked for either "allow," or "allow for session."
-
I'm having an issue with Colorsync Utility. When I open the utility I can access Profile First Aid, Profiles and the Calculator but whenever I click on Devices or Filters, it hangs and I have to force quit. I recently re-profiled my NEC monitor using xRite i1Profiler Pro and saved the ICC profile as "version 4". When I went to use the Nik's ColorEfex Pro 4 plug-in, in Adobe Photodhop CS5.1 (Creative Suite 5.5), I got a cyan cast across all my images. Nik said it had to do with a corrupt ICC profile but when I ran Profile First Aid, the only profile that came up as needing repair ( and couldn't) was EW-sRGB. I reprofiled the monitor only this time I saved it as "version 2", and the plug-in worked fine. What surprises me is that Colorsync Utilty always used to work without issue, and I never seemed to have a problem creatinga and saving ICC profiles using version 4. Any ideas as to what is causing this problem and how to fix this?
Thanks.
JamesI updated my software, and deleted my history/cache. Also, when I try to use Preview, it says that it was forced to quit while restoring windows, so when I click restore windows nothing happens. I can't view anything either. The only thing I can think that may have caused these problems is I tried to shut down and had to force it to by holding the power button. I rarely shut it off.
-
How to fix a corrupt QuickTime file?
Hey all,
Today I recorded all of our church services via iMovie (one long 4 hour clip), as I have been doing for more than a month now. However, the guy running the camera turned the camera off before I told iMovie to stop importing, so iMovie literally trashed the file.
I pulled the 50GB file out of the trash, but now QuickTime is giving me an error: "The movie could not be opened. The file is not a movie file." When I open the file in MPEG Streamclip, It says "File open error: unrecognized file type", and I click "Open Anyway". It tries to open it, but sfter 20 minutes, I get the error: "File open error: can't find video or audio tracks".
Any idea how to fix this file? (That is, outside of paying $150 for this service: http://simplemoviex.com/movierepair/repair.html .) It is not mission critical to have this file, but there was a baptism this morning that I would like to have...
MatthewHi Janke,
If you have Time Machine or another backup system that keeps multiple versions, you may be able to work our way back to a version that does not demonstrate the corruption.
Regards,
Barry -
Cleaning up audio (wind, camera noise)?
I made two mistakes in filming my recent movie:
1) I forgot to turn on the wind shield on my camera for a couple of the outdoor scenes, which resulted in a low rumbling of wind that tends to overshadow the dialogue, and
2) My camera's microphone is located at the bottom front, and in the first few days of filming when I gripped the camera body, a finger or two was covering the mic. The result was a tinny sound (probably the camera motor) that tends to mute the dialogue.
I was wondering what I can do to try to clean these things up. In the past, I've used Audacity to clean up audio, but I wanted to know if other solutions exist. Thanks.Hi Jim - it's me again!
You might like to have a look at SoundSoap (but it's not free). I've heard good reports about it. Although, apparently when removing background sounds (such as wind) other sounds (like voices) can sometimes be distorted or muffled by the process. This applies to most products like this. So things may end up sounding worse. It's probably a matter of trial and error.
Here's the link:
http://www.bias-inc.com/products/soundsoap2/
John -
HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)
This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com -
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case. -
Scrubbing Audio causes AE to beachball
Computer (OSX 10.6.8)
Mac Pro 4.1
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.93 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per core): 256 KB
L3 Cache (per processor): 8 MB
Memory: 16 GB
After Effect Settings (CS5 v 10.0.2)
Preview - Open GL is off (behavior is the same with Open GL on)
Audio Duration set to 30 seconds
Disc Cache - 2GB
Memory - Installed Ram: 16GB
Ram reserved for other programs: 6GB
Render Multiple Frames (usually set to off, but behavior is same with it on)
Cores: 16
CPU reserved: 3
RAM/CPU: 3GB
As the title says, scrubbing any audio inside of After Effects causes the program to beachball, pegging processor use at 100.9% and the program gets marked as not responding. By scrubbing audio, I mean holding down the command key while dragging through the timeline to preview the video with the audio for timing cuts and hits. This is happening with projects that only contain an image sequence and a sound file, projects with 3d camera moves and multiple layers... pretty much if I have to bring a sound file in to AE, I know it will crash when I need to check the audio.
I have tried opening a fresh project with only an audio file (a new project for each a wav, a mp3, and an m4a) and attempting to scrub through the timeline causes AE to freeze.
I am beyond frustrated at this point, as quick projects have turned in to days of work. Any ideas on how to revert AE back to a usable product are greatly appreciated.Sorry for the delay in response, I was on vacation and have just gotten caught up enough to return to this issue.
I had the most recent Wacom drivers when reporting the issue. There was a new version released today and I have updated to that. Updating the wacom driver did not resolve the issue.
OpenGL is disabled. The issue persists with OpenGL enabled.
I disabled "hardware accelerate panels" and I am able to now scrub through a single audio track of any format on the second try.
I attempt to scrub through a track and my machine beach balls for a minute
I regain control of the program and am able to scrub through a single audio file
When I get to a second audio file in the timeline my machine beachballs and After Effects stops responding just like before
Here is the most recent crash log - http://pastebin.com/cxBujE9F
This happens when switching from a wav to a wav, form a wav to an aif, wav to mp3, mp3 to wav, etc. It will freeze for a moment on the first file and completely hang on the second file.
As for audio preferences
Audio Hardware:
Default Device: System Default
Buffer Size: 512
Audio Output Mapping:
Map output for: System Default
Left: Headphones 1
Right: Headphones 2
Output:
Audio Block Duration: 0:00:01:00 -
Audio glitches with each effect/title
I'm starting to actually work with iMovie now and my first real project is giving me fits. I made a slideshow in another program, including music. I exported it as DV and imported it into iMove. I added a few titles and one effect. iMovie, of course, splits the movie into clips with each of these operations. The movie plays perfectly in iMovie and also in Quicktime Player - the problem pops up when I burn the DVD in iDVD (maybe I need to post this in the iDVD forum, but see below). At every single split (beginning and end) there is an audible glitch - an interruption, if you like. The result is totally unusable, of course.
The slideshows I have done so far(I'm using Photo To Movie) all render perfectly in iDVD, even including this one. It was only after I put this one into iMovie and edited it that I got this problem.
Has anyone else experienced this? I can't believe everybody has this happen, because Apple would never have been able to release the program in this state. So I must be doing something wrong, but what?
I sure hope somebody has an answer for this one, as I'm in deep doo-doo otherwise.
Thanks.I doubt the audio problem you describe has to do with the number of audio tracks you use or how you've used them. In fact, I'm not even sure it has anything to do with iMovie. These things get complicated real fast, and this project has gotten complicated.
You've imported video clips created in a different application to iMovie to join them together, then passed the iMovie project along to iDVD. Apparently something in that process is affecting iDVD's ability to encode the audio. That's not too surprising, actually. If there's a tiny audio flaw anywhere, iDVD may not be able to encode the DVD properly, causing an audible defect. (iDVD's job is convert an iMovie project to the MPEG-2 format used by DVD players. If the material we hand it isn't perfect, we might hear a burp. Interestingly, the burp may be more obvious on some DVD players than others.)
You said Photo to Movie movies work fine sent straight to iDVD. But that never "joins" the clips in the same way as importing them to iMovie does. iDVD encoding each separately doesn't present the same challenge as joining them in one movie. Joining requires a perfect match.
The solution may be to export the iMovie project to a Full Quality movie that you import to iDVD. Exporting to Full Quality will export to a QuickTime movie that's a DV Stream. That will "flatten" the audio, making it far easier for iDVD to handle. If there's a "burp" where clips come together, exporting might eliminate it. Or a least change the burp into sweet silence.
That's where I'd start. Export the iMovie project to a Full Quality movie. Drag that movie into the window of a new iDVD project.
If that still doesn't work, there's one more thing to try. It sometimes helps to slow down the burn speed. Instead of using iDVD to burn the DVD — which doesn't let us slow it down — use iDVD to create a disk image of the encoded video. Use the File > Save as Disk Image command to create a disk images instead of burning a DVD. (Not available in older versions of iDVD.) Open that disk image in Disk Utility and use Disk Utility to burn the DVD, choosing the slowest burn rate possible.
Keep us posted.
Karl -
OS X Lion crashes frequently, cause determined - how to fix it?
Hello everyone,
After scouring the internet for someone with a similar problem as mine, I've come to the conclusion that mine seems to be unique.
Now, the problem I'm dealing with is that my MacBook Pro (Mid 2010, Corei7) freezes up every time I undertake specific actions. When my MacBook Pro freezes, the screen goes black any audio segment that was playing at that moment starts looping. To escape this frozen state I am forced to do a forced shutdown, because it won't respond any other way.
The strange thing is, is that it only freezes during particular actions. These are:
Using Quick Preview (space bar), and switching between items using Quick Preview.
Opening a 'Browse...' window, allowing you to upload files in Google Chrome.
Downloading files in Google Chrome.
Using Mission Control.
Now, the freeze doesn't occur every time I use these features, so basically it's like making a gamble every time, hoping my work doesn't get lost.
As an attempt to try and fix this issue, I've already tried a clean install of OS X Lion, but unfortunately the problem remains.
Is there anyone out there with the same problem, or is there someone who might know how to fix it?
In any case, thanks in advance.
Kind regards,
CrisThis seems to be happening to quite a few people.
I've seen it suggested that booting into the recovery disk (power on while holding down 'command' and 'r'), going to Disk Utility in the menu bar and repairing the disk might help. -
Anybody have a suggestion on how to clean up audio in a video without having to re-import the files into iMovie?
Thanks!Thanks for the suggestion -- I also have the Toast Titanium Pro bundle, and didn't realize that I already had the SoundSoap program (SE 2.2.0 version). However -- how do I get the audio file out of iMovie into SoundSoap, and then back into iMovie after cleaning? After splitting the clip (isolating the 2 min portion with the troublesome audio) in iMovie, I did Edit > Detach Audio, but can't seem to copy the audio file into SoundSoap.
Maybe you are looking for
-
How can i take off my master card from my payment methods on my apple account
my mastercard seems to be declined so i cant make any purchases but i also cant update any apps or download any free apps is there any way i can take off my mastervard from my payment methods?
-
URGENT: Need help in stripping commas in number
Hello, XML has commas (thousand separators) in number, example, 1,234,567. Per XMLP Guide and a thread in this forum, below should work, but it doesn't. Could use some help... Thanks. Is there another or better way of getting rid of commas in a numbe
-
Incompatibility with Photoshop CS2 ??
I was running Photoshop CS2 two weeks ago, then last week it would crash every time. Has something in the OS changed that would cause this? I have repaired disk permissions and trashed the Prefs file. Is there anything else I can do to prevent the
-
I do not see Lightroom in Creative Cloud
I signed up for the Photography special that includes both Photoshop and Lightroom for $9.99 a month. When I went to download PS, I did not see Lightroom in the Creative Cloud download area. How do I get access to Lightroom?
-
Is there any hope of my NTSC 3:2 animation looking good on DVD?
Hello. I feel really dumb. Two years ago when I started a new 2D animation, I asked my art school colleagues and classmates which size to create the images at. They said 720 x 480. I thought it should be 720 x 486 or some other dimension, but followe