Cleanup after Migration

Hello, I recently migrated over to a new MacBook Pro from my Powerbook and wish to clean up some of the stuff in the Library folder.
I have a question about the following two folders:
~/Library/Favories
This folder seems to contain a FULL copy of my Documents folder, why is this? And is it safe to remove?
~/Library/Application Support/SyncServices
This folder contains a file which is nearly 500 megs. Is it safe to remove this folder?
Thanks,
Cj B

If you don't need the items you've identified in either of those two folders, it is safe to remove them. Items in your home folder are generally safe to remove unless they are in use by an open application or process.
(12762)

Similar Messages

Testing of SAP BW system after migration from OS Unix to windows

Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
Neeraj

Hi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation     PHASE 1
Review New Functionality     Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade     Install GUI's for Upgrade Test persons
"Check Prerequisites     -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems     APO
ECC6.0"
Check Compatibility Reqs with 3rd party software     ?
"Test Team 2004s Delta Training     To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes     e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded     Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint     PHASE 2
Check/CleanUp Development Objects     Check all open and not-released developments for release prior to upgrade
Prepare System Setup     Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects     Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested     Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data)     BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains     Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization     PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains     Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload     Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing     Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing     Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand     apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production     Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production     Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security     Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration     Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM

TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

See Pondini's Transferring files from one User Account to another, for starters

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Application is not working after migrated to 11.1.2.4

Hi expterts,
I developed an adf application on JDeveloper 11.1.1.6. It works without problem on 11.1.1.6.
Briefly uses following technologies: ADF faces, facelets and taskflows, EJB, hibernate...
When i wanted to go on develop with 11.1.2.4, I copied my App root folder to another folder. And chosed .jws application file from 11.1.2.4 version. Then IDE wants me to confirm about migration, then i accepted.
I develop a supplierList structure for feeding the select one choice components' selectItems. These provide load the db objects on the first calling and manages by my ListManager class.
These supplier classes initialize on the MBean init method. MBean init method calls on taskflow initializer. The project (VCUtil) that includes Supplier classes is on my main ViewController project as ADFLibrary.
But after migration when i deploy the application on my Integrated weblogic Server. oops does'nt seen my jspx screens properly on first attempt which includes supplier classes. But when i refresh the screen it can be loaded properly.
The log contains only that line:
<20-Sep-2013 10:33:31 o'clock EEST> <Notice> <Stdout> <BEA-000000> <10:33:31,189 DEBUG [PerformanceMonitor_lsr6sq_Impl] Method public java.util.Collection com.acme.model.domain.ad.sessionbean.ADManagerBean.findCurrencies() took 167 (ms)>
<20-Sep-2013 10:33:31 o'clock EEST> <Info> <ServletContext-/RestAutomation> <BEA-000000> <JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred:oracle.adf.controller.activity.ActivityLogicException: ADFC-06015: An exception occured when invoking a task flow initializer.>
My first supplier class is CurrencySupplier, and i can see acc.to the log it works, the second one is DepartmentSupplier class. So i expect log stdout about findDepartments() method too. But nothing, i guess when executing on CurrencySupplier there might be a wrong, that's why can not go on. But when i refresh the page at that time executes the DepartmentSupplier class. If i refresh page for Supplier class count times then page loads.
    public void init()
        try
            if (ObjectUtil.isNull(currencySupplier = (CurrencySupplier)ListManager.getInstance().getSupplier("currencies")))
                currencySupplier = new CurrencySupplier();
            if (ObjectUtil.isNull(departmentSupplier = (DepartmentSupplier)ListManager.getInstance().getSupplier("departments")))
                departmentSupplier = new DepartmentSupplier(false);
            if (ObjectUtil.isNull(countrySupplier = (CountrySupplier)ListManager.getInstance().getSupplier("countries")))
                countrySupplier = new CountrySupplier();
            if (ObjectUtil.isNull(cityForCountrySupplier = (CityForCountrySupplier)ListManager.getInstance().getSupplier("citiesforcountry")))
                cityForCountrySupplier = new CityForCountrySupplier(false, null);
            else
                cityForCountrySupplier.refreshList(null);
            if (ObjectUtil.isNull(districtForCitySupplier = (DistrictForCitySupplier)ListManager.getInstance().getSupplier("districtsforcountry")))
                districtForCitySupplier = new DistrictForCitySupplier(false, null);
            else
                districtForCitySupplier.refreshList(null);
public class CurrencySupplier extends SimpleListSupplier
    public CurrencySupplier(boolean blankItemApplied)
        super(blankItemApplied);
    public CurrencySupplier()
        super();
    @Override
    public void loadList()
        try
            UtilBean utilBean = new UtilBean();
            clearList();
            list.addAll(utilBean.findCurrencies());
            Collections.sort(list);
            itemList.addAll(ConversionUtil.getConvertedToSelectItemList(list, isBlankItemApplied()));
        catch (Exception exc)
            exc.printStackTrace();
    public String getListName()
        return "currencies";
I hope that i could explain the problem
Thx, bgrds

Are there missing / invalid entries in Settings >> General >> About ?

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Re: [iPlanet-JATO] Re: CSpMultiSQL after migration

Alex,
I just switched over to Netscape Messenger from OutLook and I didn't
realize that emails were displayed in threaded hierarchies and therefore
did not see that you had already had responses to your post. Sorry for
the confusion in my previous response.
matt
njdoe123 wrote:
Hi,
I have tested another simple MultiSQL. The Update, Delete, Insert
are not funcitonal. I'm using only one single database table (no
join). It worked great in netD. The database is Oracle.
We're using migtoolbox-1.1.1 with Jato 1.1. Do we have to modify
the UpdataQueryModel.java file or other ? Or could i use jato 1.2
to replace 1.1 ?
The following is log from AppServer. Could i receive the migtool
1.2 beta ?
Thanks,
Alex Lin
<Dec 21, 2001 11:18:36 AM PST> <Error> <HTTP> <[WebAppServletContext
(1572805,Tes
t3AppWar,/Test3AppWar)] Root cause of ServletException
com.iplanet.jato.model.ModelControlException
java.sql.SQLException: ORA-00933: SQL command not properly ended
at oracle.jdbc.dbaccess.DBError.throwSqlException
(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7
(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch
(TTC7Protocol.java:822
at oracle.jdbc.driver.OracleStatement.executeNonQuery
(OracleStatement.ja
va:1446)
at oracle.jdbc.driver.OracleStatement.doExecuteOther
(OracleStatement.jav
a:1371)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout
(OracleStateme
nt.java:1900)
at oracle.jdbc.driver.OracleStatement.executeUpdate
(OracleStatement.java
:693)
at com.iplanet.jato.model.sql.QueryModelBase.executeUpdate
(QueryModelBas
e.java:1788)
at com.iplanet.jato.model.sql.QueryModelBase.update
(QueryModelBase.java:
420)
at
com.iplanet.jato.view.RequestHandlingViewBase.executeAutoUpdatingMode
l(RequestHandlingViewBase.java:1070)
at
com.iplanet.jato.view.RequestHandlingViewBase.executeAutoUpdatingMode
ls(RequestHandlingViewBase.java:938)
at
com.iplanet.jato.view.RequestHandlingViewBase.handleWebAction(Request
HandlingViewBase.java:821)
at Test3App.Test3.PgUpdateViewBean.handleUpdateRequest
(PgUpdateViewBean.
java:838)
at java.lang.reflect.Method.invoke(Native Method)
at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest
(RequestHa
ndlingViewBase.java:341)
at
com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewB
eanBase.java:481)
at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler
(ViewBeanBase.
java:431)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest
(ApplicationSe
rvletBase.java:645)
at com.iplanet.jato.ApplicationServletBase.processRequest
(ApplicationSer
vletBase.java:431)
at com.iplanet.jato.ApplicationServletBase.doPost
(ApplicationServletBase
.java:296)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet
(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet
(ServletStubIm
pl.java:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute
(ServletRequestIm
pl.java:2039)
at weblogic.kernel.ExecuteThread.execute
(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run
(ExecuteThread.java:120)
--- In iPlanet-JATO@y..., "Matthew Stevens" <matthew.stevens@E...>
wrote:
EDITED
-----Original Message-----
From: Matthew Stevens [mailto:<a href="/group/SunONE-JATO/post?protectID=029166114165042198028082000056130080177026031196061130152150">matthew.stevens@e...</a>]
Sent: Thursday, December 20, 2001 4:32 PM
Alex,
If your implied question is, "Looks like the iMT did not migrate
this block
of code. What is my next step?" Then I have an answer for you. If
I
misinterpreted your email then please clarify.
The procedure for ND migration using the iMT (as outlined in the
documentation
under <iMT_install_dir>/docs) is that customized code originally
provided by
the ND developer is purposely commented out so that the file can
compile.
Our experience in migration efforts shows that it is preferrable to
the
migrator to be able to select which part of the application they
want to
work
on by uncommenting specific blocks of code - allowing for
incremental
edit/compile/test cycles. If we left all this arbitary code un-
commented,
then nothing would compile after migration and you would have a huge
roadblock for moving forward.
Judging from the "spider" APIs which are still seen in your code
block, you
must not have run the Regular Expression API mapping tool which
will take
care of many of this code. I believe that the API mapper will
migrate this
block of code almost 100% and you just need to uncomment it.
matt
-----Original Message-----
From: njdoe123 [mailto:<a href="/group/SunONE-JATO/post?protectID=230176091112175091130232203140129208071">first.us@a...</a>]
Sent: Thursday, December 20, 2001 4:04 PM
Subject: [iPlanet-JATO] Re: CSpMultiSQL after migration
Oops !
The following (very simple) customized code was not migrated.
In business logic - after update, goto another page.
My backend database is Oracle.
Thanks.
Alex Lin
-------------------------+
// The following code block was migrated from the Update_onWebEvent
method
// MigrationToDo : THIS CODE MUST BE MANUALLY ADJUSTED
int command = PROCEED;
CSpPage nextPage =(CSpPage) CSpider.getPage("PgDistrict");
executeAllUpdatingDataObjects();
return nextPage.load();
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
Alex,
CSpMultiSQL migrate just fine. You may have had to do something
extraordinary for your
particular database in your select statement.
Can we see the entire exception stack trace, and the code that is
executing the model?
Also, what database are you hitting?
c
njdoe123 wrote:
Hi,
It's a bit strange while doing CSpMultiSQL (select and update).
I have received the following error on the AppServer.
Web event invoked: Test3App.Test3.PgWebUserViewBean.Update
<Dec 19, 2001 2:20:05 PM PST> <Error> <HTTP>
<[WebAppServletContext(168087,Test3
AppWar,/Test3AppWar)] Root cause of ServletException
com.iplanet.jato.model.ModelControlException
java.sql.SQLException: ORA-00933: SQL command not properly ended
'SQL command not properly ended ?' - i haven't touched the sql
code,
it's just simple select and update to one table.
Could iMT do MultiSQL ? If not, what is the solution after
migration
Thanks,
Alex Lin
For more information about JATO, including download information,
please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, including download information,
please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, including download information,
please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, including download information, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Thank you - Jin and Todd.
Will try that.
Atul
--- In iPlanet-JATO@y..., Byung Jin Chun <bchun@n...> wrote:
try using kregedit and modify the key for the jvm args, using the -x
parameters for the 1.2 runtime
Jin
-----Original Message-----
From: Todd Fast [mailto:<a href="/group/SunONE-JATO/post?protectID=101233080150035167169232031248066208071048">Todd.Fast@S...</a>]
Sent: Tuesday, February 19, 2002 8:40 PM
Subject: Re: [iPlanet-JATO] Re: OutOfMemoryError
Atul--
Out of curiosity - How do you modify the memory parameters for
the container's VM ?? I know I should try to do some research but
figured you may already have some insight and willingness to
share.
Please consider this as low priority.It differs by container; I don't remember details of any particular one.
>
Todd
For more information about JATO, including download information, please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
<http://developer.iplanet.com/tech/appserver/framework/index.jsp>
[Non-text portions of this message have been removed]

PPR does not work after migrating from ADF 11.1.1.0.2 to 11.1.1.1.1

Hi, I'm able to programmatically refresh my UI components in ADF 11.1.1.0.2. After migrating my application to ADF 11.1.1.1.0 using the latest Jdev, I noticed that all the programmatically PPR no longer work. I'm using ADF Faces, managed beans and EJB. Data Control is not used.
In addition, I noticed in Section 7:Rerendering Partial Page Content of the latest Web User Interface Developer's Guide(B31973-03), a new paragraph was added, stating that the clientComponent attribute of the target component should be set to "true" to enable PPR programmatically. An earlier version of the developer guide(B31973-01) does not have this paragraph.
Given the huge amount of work required in going back to update the code, is there a way for me to set ADF 11gR1 to restore to the earlier behaviour in 11.1.1.0.2 by setting some parameter somwhere (e.g. in the web.xml)?

No there is no such switch. If you don't want to go through your code (which should be possible by find in files with a regular expression), you have to switch back to 11.1.1.0.2.
This would not be an option to me because of the buds fixed in 11.1.1.1.0.
Think aoubt the next version which is scheduled later this year. There you will have the same problem. If you are not fixing the code you have to stay on 11.1.1.0.2 forever.
Timo

Report generation failed after migrated from 6i to 10g.

Hi All,
i have migrated the 6i application to 10g.
There was a report which was generated in .html format and saved to a remote server location.
Now after migration to 10g,when i run the report through the URL ,It is still generated on the same remote server location but the it is not showing in the application interface.
Please help....
Thanks,
DK

Hi, Mike,
user3211655 wrote:
Hi All,
We try to migrate a 8i database to 10g by using the exp and imp. All tables and data are already migrated by imp. During the imp, there are errors said the trigger compile with errors.
When login to the em to check, I found these 2 errors.
Line # = 2 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 2 Column # = 60 Error Text = PL/SQL: ORA-00942: table or view does not exist
My trigger is a very simple one:
BEGIN
Select TB_COUNTER_SEQ.NEXTVAL INTO :NEW.INCREMENT_NUM FROM DUAL;
END;
And I'm sure the "TB_COUNER_SEQ" is there.
Do I need to change anything on the trigger when migrating from 8i?
In fact, besides this trigger, all other trigger imp to this schema are having the same error. The schema in the 10g is a newly created one, is there any special right I need to create grant to this new user?Grant the necessary privileges on the tables (and any other objects used, like sequences) directly to the owner of the triggers. Privileges granted to a role don't count in AUTHID OWNER stored procedures; the privileges have to be granted to the owner of the stored procedure (or to PUBLIC).
It the error is occurring at position 60, then it looks like you don't have privileges on dual. Login as SYS and
GRANT SELECT ON dual TO PUBLIC;You may need synonyms (perhaps public synonyms) for the objects, too.

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

Unable to view catalog after migrating from OBIEE10g to 11g

Hi All
I migrated "rpd and catalog" using "Upgrade Assistant" utility (Ora_Home\bin\ua.bat) available in OBIEE 11g. But after migration, I am unable to view my catalog and even create analysis reports in Analysis of 11g.
Do I need to do something additional. Although I am able to login to repository.
Thanks..

Ideally it shud...can you try this tutorial with Sample or Paint objects ??
http://howtobi.wordpress.com/2011/01/14/upgrading-obiee-10g-content-to-11g/

Difference in behavior of sql and pl/sql after migrating from 9i to 11g

after migrating our database from oracle 9i to oracle11g, the developpers are worry that the behavior of the queries and pl/sql procedures/functions will change
example :
in 9i, select salary,count(*) from emp group by salary, it will display the rows sorted by salary
in 11gi, select salary,count(*) from emp group by salary, it will display the rows not sorted by default, we have to add the clause order by salary.
somebody could give the list of other difference in behavior (SQL and PL/SQL) agter migrating from 9i to 11g
Thanks a lot.

Tell your developers: garbage in - garbage out. In relational databases only ORDER BY ensures row order. If your developers relied on GROUP BY implemented by SORT and therefore returning ordered rows they had to realize code they wrote is Oracle release dependent and sooner or later code would require changes. And that "sooner or later" is now reality. In newer versions ORACLE can do GROUP BY via SORT or via HASH. And if it is done via HASH - don't expect ordered results. So tell your developers "payback time".
SY.

Unable to parse WSDL of partnerlink after migrating from 10g to 11g

Hi,
My service is an Sync BPEL process calling a customised WSDL with the partnerlink. I migrated the working code of 10g to 11g. But compiling below is the error i am getting while trying to parse the WSDL of the partnerlink after migration.
==========================================
java.lang.RuntimeException: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:78)
     at oracle.tip.tools.ide.common.bpelparser.implementations.xmlef.ProcessImpl.fireModelChanged(ProcessImpl.java:130)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.firePartnerLinkCreated(PartnerLinkEditPage.java:1426)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveToModel(PartnerLinkEditPage.java:360)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveChanges(PartnerLinkEditPage.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.AbstractActivityNodeEditor$PanelManager.saveChanges(AbstractActivityNodeEditor.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.handleOK(ApplyCancelPanel.java:268)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.actionPerformed(ApplyCancelPanel.java:339)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1045)
     at java.awt.Dialog$3.run(Dialog.java:1097)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1095)
     at java.awt.Component.show(Component.java:1563)
     at java.awt.Component.setVisible(Component.java:1515)
     at java.awt.Window.setVisible(Window.java:841)
     at java.awt.Dialog.setVisible(Dialog.java:985)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1899)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1830)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.mousePressed(GraphPane.java:2186)
     at oracle.tip.tools.ide.pm.bpelgraph.views.BPELGraphPane.mousePressed(BPELGraphPane.java:2010)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.Component.processMouseEvent(Component.java:6260)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4235)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.validateNameDefined(JDevSCAIntegrationUtil.java:687)
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.outboundParnerLinkCreated(JDevSCAIntegrationUtil.java:233)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.createOutboundPartnerLink(JDevScaProcessListener.java:170)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:65)
     ... 64 more
======================================
Can someone help me out!
Thanks in advance:)

Were you able to resolve this Issue, can you please post the solution
글 수정: soauser

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Cleanup after Migration

Similar Messages

Maybe you are looking for