Clear all settings on a single interface?

Hi,
Does anyone know if it's possible to clear all settings on a Cisco 3750 on a single interface with one command?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
BTW, the default interface command often works on other Cisco network devices too.
Whether a defaulted interface will be in shutdown or not, appears to vary, so as I never recall device specifics, I'll follow up the default command with an interface command to either shut or no shut the interface (to make sure it's as I desire).
Also BTW, on 6500s, some interface commands program the ASIC, i.e. they impact other ports. Defaulting an interface will remove those commands from other interface within the same ASIC port group.
So the moral of the story, be careful when using the default interface command.

Similar Messages

How to prevent the Firefox cache from clearing -- all settings are right, but the cache is gone after each restart.

I want to prevent cache from being deleted after each restart. "Clear history when Firefox closes" is unchecked. User.js files are deleted. Checking "Override automatic cache management" made Cache folder appear in addition to Cache2. After exiting Cache is still there, but upon Firefox re-launching, Cache turns into Cache.Trash and promptly disappears. What to do?

Hello,
I'm sorry to hear that. Can you please try these solution to address your concern.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
<b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

Is it possible to clear all mail settings and start again?

I have no idea how but I have SMTP settings and Pop settings in my server list in Mail that are long gone, years ago, and I think they are causing issues with other email settings, is it possible to clear all settings and start from scratch? (without losing any mail)
Thanks

You can't just edit them from Accounts>Preferences? Other than that, first quit Mail and make a backup copy of your entire Mail folder in your user Library/Mail. Move it out to the Desktop by holding the Option key down while dragging, for safekeeping.
Then, with Mail still quit, navigate to the user Library/Preferences/com.apple.mail.plist and move that file out to the Desktop for safekeeping, in case you want it back. You want to remove that file completely from its original locaton. For this, don't use Option-drag.
Now open Mail and you will get a new setup routine. I've gone as far as being presented with the new Mail setup, then decided not to follow through by putting the original preference file back, so I don't know if your old emails will automatically be present. But, if not, you will have the backup Mail folder from which to restore them.

How to clear all eventcombMT lockout tool settings?

We have an eventcombt user that cannot get any results returned when running the tool from their workstation after a name and Windows account change. It works for other accounts with the same security memberships.
We need to clear all the saved eventcmbmt settings out of a user's profile so all remembered settings and credentials are cleared as if the user is using the tool for the first time on a brand new PC
Are there settings stored in the registry and appdata?

You can clear the search using "Clear search". Registry is not the storing area (except explicit credentials). Not even the app data.
I believe cache is in DLL. Captured by Procmon.
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..
Maybe there is another problem then.
The user is logged in as a different user and using Runas "different user" to run eventcombmt as a domain administrator user, selecting the built in search for account lockouts, then substituting those old event IDs that it puts in by default for
event 4740. Then entering the user ID we are checking for lockout in the text field.
When the user runs the query on his workstation, it finishes instantly and shows no results. I don't see any error displayed to see why it is not working.
I can run the same query using "runas administrator" for UAC prompt (add domain admin account as admin credentials) enter the same info and it runs the query fine for me on a different computer and the account I use has the same group memberships
as the account the other user used.
Does evencombmt log errors somewhere to tell you why a search fails to run?
Is there a more modern tool available that will show the same lockout information (display source of lockout, not just tell you the date and time the account was locked out)?

Is there any way to clear all the varibles in a FM in a single statement?

Hi experts,
When I call different screens in my FM group, I want to reset all the varibles to its initial value, that is , clear all of them, when I call some screen. Clear them one by one is not a good way. THX!

Hi,
to clear variables of some function group, use following code:
FORM clear_global_vars USING uv_fg_name.
DATA: lt_olist TYPE STANDARD TABLE OF scompo,
              lv_prog_name TYPE sy-repid,
              lv_var_name TYPE string.
FIELD-SYMBOLS: <ls_olist> TYPE scompo,
                 <lv_var> TYPE ANY.
CONCATENATE 'SAPL' uv_fg_name INTO lv_prog_name
CALL FUNCTION 'WB_TREE_GET_OBJECTS'
    EXPORTING
*   INCLUDE       = ' '
      otype         = 'D'
      program       = lv_prog_name
    TABLES
      olist         = lt_olist
LOOP AT lt_olist ASSIGNING <ls_olist>.
    CONCATENATE '(' lv_prog_name ')' <ls_olist>-name INTO lv_var_name.
    ASSIGN (lv_var_name) TO <lv_var>.
    FREE <lv_var>.
ENDLOOP.
ENDFORM.                    "clear_global_vars
Regards,
Adrian

LR 4 RC2 ...vexing problem, 3 sessions with support and still not able to find? With all settings re

LR 4 RC2 ...vexing problem, 3 sessions with support and still not able to find? With all settings reset and running a test catalog a raw image when opened in develop will when imediately going back to library view show a significant color shift in red, orange and purple but only in images with significant content in those colors. at first the culprit appeared to be camera calibration default but not reproducable. The problem exists even when opening older images from months ago? Also if second screen running in loupe mode the image is not shifted.
Any ideas please
Dave

Jim01403, Geoff and others...I'm new here so I'll need a little time The thread is very interesting, populated by serious mature people, how refreshing! It clearly is part of what i'm experiencing and is answered answered here...thank you. My main problem is still the significant color shift between develope and library modules. I'll attach one from each so you and others can see. Unfortunately the library version is the bad one so printing is now very problematic...Note, this occurs in either single or with second monitor on the library version is displayed. I have reset virtually everything and wonder if a cache is not updating or color space is not matching? A symptom/detail worth noting, when switching to library mode, the correct image is displayed for about a second then it jumps to what you see in the examples. As if the library module starts to rendering from develope settings then jumps tback to the original inedited preview??
Maybe just go back to 3.6 and tread water till 4.1 is fixed?
Dave

Cannot copy or clear develop settings in Adobe Bridge

okay, here's my problem. all of the sudden i am no longer able to clear or copy develop settings when i right click on raw files in adobe bridge. the problem seemingly began out of nowhere. when i attempt to use these functions i get the following error message: "Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature." i have googled this to no end and it seems there is no solution that actually works. just to be clear, all of the results for this search ive found seem to be users getting the same error message and the inability to OPEN raw files from bridge; this is NOT my issue. i can still open raw files from bridge with no problems whatsoever but i just cant clear my develop settings. ive googled "cannot clear develop settings" and have found nothing specific to my situation. ive tried resetting bridge and camera raw to their default settings and that hasnt worked. ive moved my cache to a different drive and that hasnt worked. i opened bridge from photoshop and that also hasnt worked. id like to think there is a solution that doesnt require me to uninstall and re-install the entire application. any help would be greatly appreciated.

any help would be greatly appreciated.
For that more info is needed like system, specs, versions etc. Check this for a start:
https://forums.adobe.com/thread/375816?tstart=0
Also in this forum are several threads with the qualifying problem subject.

I have cleared all apps from my ipad. How do yo get rid of calendars and delete saved messages which is taking all mt storagw

I have cleared all apps but still not able to download a rented movie. The only spot where I have data stored is in saved messages andd calendars. Cannot find the saved messages and cannot delete calendars. Any other suggestions because this was a very stupid purchase if you only have enough storage for the standard apps.

Go to: Settings>General>Usage>and see what is eating up all of your memory. After you find what is eating up most of your memory just delete it thru:Settings>General>Usage. I would not think your calendars and messages would take up all of your memory.
Cheers,
Alec

How to clear all open GRIRs in the year end and maintained as provision ?

Hi Friends,
I would like to clear all open GRIRs in the year end and maintained as provision.
in the next year next day i would like to show as open items.
How can do it ?
I have tried to clear it. I have maintained OBYP settings also. But i am unable see as clear item.
Could you explain me how it actuallly works ?

Hi REddy,
In most of the cases, the GR/IR account will have a credit balance and would be taken as provision for liability during year end activites. So as a standard practise you need to clear them on year end.
but if you want to clear them, first you need to deselect check box Post automatically only for GR/IR clearing GL's master data.
Then pass a adjustment entry like
GR/IR GL Dr
To Provision for Liabilites GL: Cr
Above sample entry is true when your GR/IR account has a CR balance at the year end. if not post it in a reversed manner.
Now with tcode F-03, for GR/IR GL, choose all items and clear them. Now you will get the clearing doc number.
Now on start of new FY, reverse the above accounting entry with FB08.
This will meet your requirement.
Thanks,
Srinu

On an iPad with iTunes, do you know if you can edit/delete all your tunes on your device with a "clear all" button rather than having to delete a song one by one like you have to do on an iPhone if not synching via a MacBook/ PC with iTunes account?

I'm signed up to the Cloud and itunes match - the whole game. But I cam getting annoyed with having to delete songs one by one on my iPhone once dowloaded from the cloud as I only have a 16GB phone....yes I listen to music non-stop! So, I am thinking about getting an iPAD as I rarely use my MacBook Pro for anything other than surfing and music now... so the question is: "On an iPad with iTunes, do you know if you can edit/delete all your tunes on your device with a "clear all" button rather than having to delete a song one by one like you have to do on an iPhone (if not synching via a MacBook/ PC with iTunes account where I know you can clear down and refill with ease)????

Have you tried
Settings > General > Usage > Music > Edit > Delete

How can I change the apple ID on my iPhone to clear all contents and installation?

I still have my iPhone 4s, Which I stopped using when the screen died. I bought a new iPhone 5s. Since, I've changed my Apple ID main e-mail address.
Today I had the screen of the old 4s fixed. Now I want to clear all contents and installation so that I can sell it.
Problem is, that it keeps asking me to verify my Apple ID with my old e-mail address, which obviously doesn't work.
I've allready changed the Apple ID e-mail address in the Apple-ID area in settings. But this doesn't help.
Does anyone know the way out of this?!?
Thanks!

http://support.apple.com/kb/HT5661

How to clear tab settings in Designer in 7.0

I imported an existing form and added text fields/drop downs, etc. I used copy/paste throughout. When I went to set tab order there are in some cases 3 or 4 numbers beside a single field and even straight text fields are numbered. I can't figure out how to clear all of these out so that I can properly set the tab order. When I did advanced>accessibility>full check in the form in acrobat it said that "WARNING: Since the PDF file contains Adobe XML form fields, you must use Adobe Designer to repair errors" and "All of the pages in this document have tab order that may be inconsistent with the structure order".
I am brand-new to using this software so as detailed an explanation as possible would be greatly appreciated.
Thanks!

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

So,I just got my iPod Nano fixed.For them to fix it they had to clear all my songs.When I plug it in it says you must restore it to use in windows.It also says it may delete songs,off of my iPod or laptop?Do I restore it?Will it do anything to my iTunes?

So, I just fixed my iPod Nano fixed. For them to fix it they had to clear all my songs. When I plug it into my Toshiba laptop it says you must restore it to use Windows. It also says it may delete songs to return to factory settings, but will it delete them off my iPod or my laptop since I don't have any on my iPod? Do I restore it? Will it delete anything off my iTunes or nothing? I really need to know!

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

After the kit kat update, S voice doesn't seem to work any more to wake up my phone. I've redone all settings for it with no luck.

"Hi Galaxy" will not wake up my phone after updating to 4.4.2. Is there any solution? I went back to scratch and did all settings to no avail.

Okay after two hours I got a tech on the phone that accessed the task manager and did a cache clean up on the entire phone. This worked and now Hi Galaxy will wake up the phone.
1. Go to Settings/Application Manager. Slide the screen to reveal ALL applications then scroll down to S Voice. Hit CLEAR CACHE. Then while you are still on that screen hold down the home button and hit Task Manager on the bottom left. Under RAM click CLEAR MEMORY over and over until zero applications are closed. Then restart the phone.
2. After the restart turn the phone back off. Once the phone is off you will hold the UP VOLUME, HOME BUTTON and then hold POWER at the same time. Once the phone turns on you can let go of the Power Button. RECOVERY BOOT will appear in the top left. You will come to a menu of options up in the top left corner. Use the VOLUME DOWN button to highlight WIPE CACHE PARTITION. You will select this option by pressing the POWER BUTTON. When this short process is over it will highlight REBOOT and just hit POWER again to reset.
Hope this works for you.

How do I clear all personal data bookmarks history etc and import data from safari

I have a MacBookpro 10.6.8 and I am trying to clear ALL personal data on my new Firefox 12 (Bookmarks History etc) and then import all settings from my Safari. I've deleted the Firefox application as well as Library/application support/mozilla and Firefox still retains all of the old settings (Bookmarks History etc) from the old version 3
How do I do this.
Thanks

You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
Make sure that Firefox is closed (Firefox > Quit Firefox) when you remove files in the profile folder.
You can also create a new profile.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
You can transfer some files from the old profile to that new profile if you want to keep some data.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Clear all settings on a single interface?

Similar Messages

Maybe you are looking for