Clear BIOS password

i am gettin code 7222787 on a presario cq57-339WM could i please get the master pass to get into it
This question was solved.
View Solution.

Try >> 63180309
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • How do I clear bios password (compaq CQ-62)

    How do I clear bios password (compaq CQ-62) the key code is 62154197

    Hi,
    Please try: 73832119
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need to clear bios password on Elitebook 8460p

    I've opened it up, no RTC found. 

    Removing the battery will not clear BIOS password on an Elitebook.It usually requires service from HP.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How To Remove or Clear bios password?

    This information is intended for experienced users. It is not intended for basic users, hackers, or computer thieves. Please do not try any of following procedures if you are not familiar with computer hardware. I'll not be responsible for the use or misuse of this information, including personal injury, loss of data or hardware damage. So use it at your own risk.A. By Using the Motherboard Jumper:In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method.Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc.When you find the jumper, look carefully.  There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin.Make sure to turn the PC off before opening the cabinet and resetting the jumper. B. By Using Software:
    I have found that BIOS/CMOS Password Recovery Tool is the most effective.:
    BIOS/CMOS Password Recovery Tool is a program that works instantly to remove any lost or forgotten BIOS/CMOS password. Simply boot your PC to DOS and execute the program, and get access to forgotten BIOS/CMOS passwords in just secondsBIOS/CMOS Password Recovery Tool  Service:  http://www.biospasswordrecovery.com/

    faithikogor wrote:
    no I didn't
    Some require you do this 3x and it gives a lockout code that you can tell us and we can get a reset code to remove the bios password. If 3x doesn't work you might have to contact a MODerator on here and ask them if there is some other steps to try.

  • Portege 7220: Clearing BIOS password

    Hi,
    I have just installed WinXP on my Portege 7220. I have installed the utilies download, but find that I cannot open the HW Setup application.
    I need to disable the BIOS password that a previous user had created.
    Advice please.
    Cheers,
    NEIL

    Hi
    Jack is right.
    Please check another topic about this theme:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6030&messageID=20808#20808
    Bye

  • CLEAR BIOS PASSWORD AND POWER-ON PASSWORD

    How do I remove my bios password and power-on password on my notebook? Hope that you'll help me with this. Thanks!

    Enter BIOS by tapping F10 immediately after powering on to enter BIOS. You may need to tap Esc key first, then F10 at the menu.Once into BIOS under Security disable all passwords by entering your current password and leave the new password blank. Save & Exit

  • Can not remove BIOS password on Satellite 3000-504

    Hi,
    I cleared BIOS password in Toshiba Satellite 3000-504 to upgrade BIOS on this computer. So I entered BIOS > entered old password > enterd twice new blank password (2 x enter) and after this I reset computer.
    After restart computer again asked me to provide password, but the old password and blank password wasn't correct. And now I can't enter BIOS and start computer.
    Any suggestions what was happened and what can I do right now?
    Regards
    Lukasz

    I dont know what was happen but one is sure: you have big problem now. Please contact authorized service in your country and let them remove BIOS password. It will cost you but unfortunately you do not have other choice.

  • HP EliteBook 820 removing bios password.

    Please help me removing bios password on HP EliteBook 820

    You can clear the CMOS to clear BIOS password.
    To clear CMOS, refer to the link mentioned below to remove the CMOS battery and wait for 20 seconds and then replace it and power on and check.
    http://h20464.www2.hp.com/index.html
    From this link, under product category select "Laptops and notebooks".
    Under product family select "HP elite noteook pcs".
    Under product series select "HP Elitebook 820 which your notebook model and then click on 
    remove replace videos at the bottom and then click Real time clock battery on the new window.
    This will show you the video to remove and replace RTC battery.
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    AntonyG1
    Although I am an HP employee, I am speaking for myself and not for HP

  • I have hp 6720s laptop. i forget my bios password. plz tell me how i clear password

    i have hp 6720s laptop. i forget my bios password. plz tell me how i clear password

    After 3 failed attempts do you any code???
    Let me know.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • How can I clear the CMOS/BIOS Password on Satellite L10

    HOW can i clear the CMOS/BIOS Password?

    Hi
    Sorry to said this, but its not possible to delete the BIOS password without a help from the Toshiba authorized service provider.
    The special procedure is needed to delete such password.
    Therefore you have only one way out. Contact the ASP in your country and ask for the BIOS deletion

  • Cisco Server VCS C220 M3 Server BIOS password issue

    We have a Cisco Server VCS C220 M3 Server BIOS password issue.
    We needed to turn on Bit locker in the Cisco Server VCS C220. To do this we needed to create an administrator password for the BIOS to turn on trusted Platform Module (TPM). After we set up the administrator password and turn on Security for TPM. We were prompted for the administrator password. It would not let us log in with the administrator password that we created for the BIOS. In the next few days we received a BIOS is corrupted screen (BIOS Flash Image Corrupted *****).We follow procedures to recover the BIOS with the USB stick with recovery .cap file in the root folder. We tried reseating the jumper pg. 35 of the Cisco Server VCS C220 M3 Server of the Installation and Service Guide.
    http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/C220.pdf
    We were able to bring up the server, but we are still not able to get pass the Admin password issue. We tried to clear the CMOS header with Header J37 page 2-18 but we had no success with clearing out the password prompt. Figure 2-6 Service Header Locations shows the J41 BIOS RCVR boot and J37 Clear CMOS.
    Can anyone provide us documentation of where the pins are located on the motherboard to clear the BIOS password? We are looking for more of a detail picture of the pins please. The documentation is only showing a basic diagram of the header locations.

    You need to look at the CUCM logs for further info on what might have happened, and to make sure your servers are fit for the amount of users, devices, etc. you have in your environment.

  • How do I reset my BIOS password?

    Is it possible to reset a Macbook Pro (purchased early 2010) bios password? I am trying to boot from a DVD, but seem to have forgotten my password. I know on other hardware, you can pull the CMOS battery, but I have found no documentation for this on a macbook pro.  Thanks.

    i have mac book pro 2011 or 2012, and i live in iran.
    I hate to be the curmudgeon, everyone wants to help. That said, Apple has explicit rules regarding Iran (long standing trade embargo; this includes use of the software in restricted regions):
    http://store.apple.com/Catalog/US/Images/MacOSX.htm
    8. Export Law Assurances.
    You may not use or otherwise export or reexport the Apple Software except as authorized by United States law and the laws of the jurisdiction in which the Apple Software was obtained. In particular, but without limitation, the Apple Software may not be exported or re-exported (a) into (or to a national or resident of) any U.S. embargoed countries (currently Cuba, Iran, Iraq, Libya, North Korea, Sudan, and Syria) or (b) to anyone on the U.S. Treasury Department’s list of Specially Designated Nationals or the U.S. Department of Commerce Denied Person’s List or Entity List. By using the Apple Software, you represent and warrant that you are not located in, under control of, or a national or resident of any such country or on any such list.
    To be clear, Apple has no official presence in Iran.
    Would still like to help, but wanted to set expectation since we're treading in a very delicate area...
    Don

  • Bios Password in A305..Please help..URGENT!!!!

    Hi...please help guys..i have a problem with my friends laptop..he accidentally change the bios passwod and forgot it what he put on it..the model is Satellite A305-s6905..i already open it and look for some jumper setting to reset it..but no success..i cant find a word like CMOS clear or CMOS reset..i already download the flash bios on this site so that the bios will reset but..the problem is ,it wont boot first on the DVDROM because you must enter first the password...please please help me...i want to show it on a accredited toshiba repair center but their are asking for the orignal reciept and that reciept is already gone 1 year ago...i wish you could help me guys...our thesis is almost near and we cant finish the thesis because its inside that laptop... 

    There are thousands of laptops that get stolen annually. To make sure that it is not a stolen laptop, the Toshiba service places demand that you show some documentation proving its yours. One way to do that is to register your computer. In that way you can prove your ownership without having the reciept. The Toshiba techs can access the Registered Computer database and verify that the person at the counter is the legitimate owner even without a receipt.
     Did you use a credit card? Maybe the credit card company would have the invoice for your computer, along with the serial number of the computer. Or what about the dealer that sold the computer? Maybe they have a record of the sale, along with the serial nrumber of the computer.
    Just think if your computer had been stolen. You wouldn't want a Toshiba tech to remove the Bios password on your computer just because the thief had "forgotten" the password?

  • Bios password reset

    I have been using my laptop Compaq Presario V3000 with service tag v3070TU from last eight years. This laptop is also being used by my kids for playing games. As we know that there are two types of BIOS password i.e. "Supervisor" and "User". I had kept both passwords separate. For myself, I kept Supervisor password. Kids also kept their own User password.  I was in view that I can change ”User" password whenever I wish as I was using Supervisor password.  The time went by. The kids changed "User" password as they wished. Later I purchased Desktop for them.  Again the time passed and for opening the laptop I always used my own  ”Supervisor" password. No issues. The kids forgot their own password. But I was assured that I will change it whenever required. So few days back I thought to change the password kept by kids. To my surprise, I was unable to change the password. I search many forums and tried to reset the password as per procedure laid by HP. but all efforts failed. Then I thought may be upgrading BIOS will reset the password to default. So
    I upgraded the Bios to the latest one F.25 (phoenix BIOS) to my surprise, my laptop still wanted the password to boot. Though I could do all the office work on my laptop but still I always felt handicap due to password issue.
    Yesterday I thought why not to clear my “Supervisor” password  so that it may not ask any password during boot. So I entered BIOS and navigated to supervisor password, pressed enter twice, and got alert that password is removed. Saved, rebooted and It again asked for password. Now my Supervisor password is also not working, even pressing “Enter” during boot is not working.  Now I cannot enter in setup also.
    Please help.

    Take a look at this thread soniass and let me know if it helps,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Forgotten my BIOS password on my hp Pavilion dv2718 laptop!

    I have forgotten my BIOS password on my hp Pavilion dv2718us laptop. When I access Setup through F2 and then try three times unsuccessfully, I get code 08653. The specifics of my laptop are:
    HP Pavilion dv2718us laptop
    Phoenix BIOS ID F.27 11/27/2008
    Windows Vista Home Premium 32-bit SP2
    Please help ... gww
    This question was solved.
    View Solution.

    Decided to go ahead and pull the CMOS battery and clear the password which worked fine. When I went into the BIOS, I realized that the first password given me - (generic Phoenix) pkxdirv actually worked because I had pressed F2 and not F10. F2 apparently only brings up the Diagnostics part of the setup, at least on this laptop. Thanks for the help ...

Maybe you are looking for

  • How do you configure a calendar subscription on the iPhone?

    I am unable to add the US Holiday calendar to my iPhone. When I try to Add Account to Mail,Contacts,Calendars and select the Other>Add Subscribed Calander then the URL . . .  "http://ical.mac.com/ical/US32Holidays.ics" where the calendar is, I get a

  • Advice needed on getting 2-G4s up to speed

    Here's my dilema; I have 2 G4s, (1)-Dual 1Ghz MDD and (2)-867Mhz QS. Both have the original Airport cards(slow speed) installed and I have a Graphite Base Station. I'd like to get both of these machines up to the current wireless speeds if possible.

  • Scanner Quality

    I recently managed to connect my Umax Powerlook 2100XL to my (relatively) new iMac at work after months of trying. I downloaded Vuescan and it now works great. I scanned in a document and it was came out lovely, so I had a look at the glass and thoug

  • Presentation

    I've used PowerPoint for the past 10+ years, and only have recently converted to Keynote '08 -- so my familiarity is heavy in PowerPoint not Keynote, so forgive my naivety. I think I have discovered a dilemma: When I have an external display hooked u

  • Change language to English Adobe CC - only for 1 USER

    Hi! I'm using Adobe CC in my company, which is a french agency. I'm used to use the programs in english, so I'd like to know if is it possible to change the language for only ONE USER of the suite. If possible, I'd love to keep it both languages (Eng