Clear CMOS after every crash ?

Question

After putting together a new system I have this problem.
When the PC freezes, and this happens instantly if I hit the "auto" button in the CoreCentre pannel it will refuse to boot up again. To unfreeze it I turn the main power off for a few seconds and upon turning it back on the MB comes to life for half a second and shuts down. This happens over and over, on its own. The CPU fan kicks in along with the blinky leds on the MB fan, and the power led on the front pannel comes up ..... only for half a second on, 1 second off, half second on etc.
Only way to cure is to clear CMOS ram and the system will fire up as norm.
Ideas?
Neo12SR
P4 3.0
Kingston Hyperx 500mhx 1g
Powercolor 8900xt
No overclocking or performance tweaks used.

Answer 1

Do NOT use the Auto Overclock button on "Core-Center" , as this Feature Raises your FSB until your PC Fails , and this is supposedly the Highest that you can Set your FSB to Upon Reboot, I dont Recomend Using Core-Center for ANY Hardware Changes, as it is still a project that is in the Works......Use "Clock-Generator" for Raising your FSB or Use the BIOS, and for Monitoring your Temps and voltages use "Speed-Fan".........Sean REILLY875