Clear Connection statistics WAE

How do we clear connection stats in monitoring option in WAE ? I went to CLI and run "clear statis all" but could not clear "connection summary table" in "monitoring" display.
thanks
Serhat

I don't think this connection summary screen is reflecting what has been happening. I have disconnected the link (all sessions broken), it still shows connections that started 11 and 6 hours ago.Besides, I am running Netflow in the branch router that shows 64 MB of Notes traffic sent to the branch but connection summary does not have any stats on it. I might report this to TAC.
10.64.191.40:2358 10.64.101.151:42510 waasdcp1 11:19:13 36.5117 KB 22.623 KB 38%
10.64.191.15:32873 10.64.101.151:27010 waasdcp1 6:45:20 28.2832 KB 9.5088 KB 66%
10.64.241.130:2418 10.64.191.21:445 waasdcp1 0:30:17 19.1846 KB 12.1631 KB 37%
10.64.218.91:1602 10.64.191.21:445 waasdcp1 0:21:14 13.6436 KB 8.0693 KB 41%
10.64.102.76:1927 10.64.191.21:445 waasdcp1 0:21:1 26.7871 KB 16.7832 KB 37%
10.64.241.105:2145 10.64.191.21:445 waasdcp1 0:14:22 8.8232 KB 7.4648 KB 15%

Similar Messages

WAAS 4.1 - connection statistics

Need help interpreting connection statistics.
The GUI shows no values against 'Percentage Compression' and 'Effective Capacity' (as per attached .jpg's)
Outputs of 'sh stat conn det' on both peer WAE's appear to show that the connection is fully optimised in both directions (as per attached .txt's).
How can I calculate optimisation result for the CLI output?
Thanks
DG

DG,
The statistics show that the output bytes on the optimised connection are >= the input bytes from the original connection. So basically compression isn't buying you anything here.
What type of traffic is this? Is it encrypted?
Zach

Connection Statistics no longer displays any data

Hello,
We're using WAAS 5.3.1 and "Monitor > Optimisation > Connection Statistics" has stopped displaying data in all browsers - Firefox 25, Chrome
30.0.1599.101 m and IE 10.
Flash v11.9.900.117 installed.
Any ideas would be appreciated.
Thanks.

Fixed in the WAAS 5.3.3 code.
CM page loading issues in Chrome browser version- 29+ or Firefox 25+
Symptom:
Loading of web pages having dialog in Chrome version 29 may fail with an error about getAttribute not defined.
Some examples are: AppNav Cluster page, Network Interfaces pages, chart dashboards.
Conditions:
Launch Central Manager in Chrome 29 or later or Firefox 25 or later
Workaround:
None. Use an alternative browser such as Firefox up to version 24 or avoid upgrading to the latest version of Chrome (29)/ Firefox 25Uninstall Google Plugin on IE-8/9, to continue to work with AppNav Cluster Page, Dashboard Page, Network Interface page.
Further Problem Description:
This is wholly a chrome bug. Dojo library requires fix for this issue.

I can't update my iPod software because it says I am not connected to the internet. I am clearly connected to the internet though. Any thoughts?

I can't update my iPod software because it says I am not connected to the internet. I am clearly connected to the internet though. Any thoughts?

Did you make sure that your security software is not blocking the contact to Apple servers? iTunes for Windows: Troubleshooting security software issues

Safari won't trust ANY website certificate, even after I tell it to, and i can't connect to the APP store even though I'm clearly connected to the internet. This all started immediately following a RAM upgrade. Please advise.

Safari won't trust ANY website certificate, even after I tell it to (click Always trust this site option), and i can't connect to the APP store even though I'm clearly connected to the internet. This all started immediately following a RAM upgrade. Please advise.

Take each of the following steps that you haven't already tried. If the problem isn't solved, ask for further instructions.
1. Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
2. Disable any third-party firewall, "security" software, or network filter.
3. In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
4. The process by which OS X checks the validity of root SSL certificates doesn't work behind the authenticating SOCKS proxies used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.

ACE Module - Archiving Rserver/Serverfarm connection statistics

Hello,
We have CiscoWorks and Cisco Security Manager in our setup. And we would like to record/archive the rserver/serverfarm connection statistics from ACE20 Module. CiscoWorks is only able to pull CPU & Memory stats.
Is there a way where connections stats can be collected. If so, please advise the method or tool (possibly free) which could record and give historical view of the connection statistics.
Thanks.

Hello Dedra-
What you are looking for is ANM. It is a software that runs on RedHat 5.2.X linux (we also just released a VMWare image for ESXi 4.X) It uses SNMP, SSH, and system logging to manage and monitor CSS, CSM, ACE, and the SSL Service module (and to a minor extent the 6k chassis the devices are in.) It stores information and has the ability not only to show you numbers, but graphs and topological ouputs based on your unique configuration.
Unfortunately, we do not offer it for free, but it is licensed based on how many contexts/physical devices you use it with. Give you Cisco Sales engineer, or Cisco Partner a call and see about getting a demo license. As well, check out the documenation on it located here:
http://cco.cisco.com/en/US/products/ps6904/tsd_products_support_series_home.html
Regards,
Chris Higgins

WLC2006 - How to clear client statistics

Hi,
I have a few questions about the WLC2006 CLI:
1 - Client statistics can be displayed on the WLC2006 with the command "show client detail <MAC addr>". I don't find in the documentation how to clear these statistics.
2 - Comments are generally welcome in capture files. What is the "!" IOS equivalent?
3 - Is it possible to suppress the "more" with a command such as "terminal length 0"?
Any link is welcome. Thanks by advance.
Best Regards,
Alain-Claude

The show client detail command output depends on the clients that are presently associated with the LAP. Once the clients get disconnected from the network, the stats should get cleared automatically.
We presently do not have a equivalent command for terminal length 0.

History active connections WAAS (WAE)

Hi Folks!
I need extract the history active connections from WAE-512 and WAE-612. For example, in hour XX:XX I was X number of active connections.How I can do this? It´s possible? Exist SNMP OID to collect this information if not is possible in Central Manager?
Thanks.

Hi Harrisson,
Thanks for marking this Answered.
You can use WAE Central Manager to export these numbers to any NetFlow analyzer.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/planning.html#wp1041835
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/monitor.html#wp1163526
WAAS does flow the agent to any netflow collector / analyzer. NetQoS and NAM can understand this traffic directly where as you will need additional customized api if you want to export the stats from WAAS to others.
All these APIs are publicly available and listed here: http://www.cisco.com/en/US/products/ps6870/products_programming_reference_guides_list.html
Cisco WAAS reporting using NetFlow can be done with almost any NetFlow collector that supports both ingress and egress flows. One of the 3rd party has posted this on their website. Best Practices blog releated to Cisco WAAS and NetFlow.
http://www.plixer.com/blog/netflow/best-practices-for-cisco-waas-reporting-using-netflow/
Hope this helps.
Regards.

Clearwire's CLEAR connecting to WRTP54G

I've been a Clearwire customer for years, and have had no problems with their modem and the WRTP54G working with each other. Today I got my new CLEAR WiMAX modem and now the WRTP54G will not connect. When I plug directly into the modem all is well, when I plug the router in, I get plenty of signal and it appears to login just fine, but I can't get out on the internet. Are there new settings for the router now that I have the new modem?

As you have changed the modem,you need to reconfigure the router as per the ISP settings...Connect the modem to the router on internet port and the computer to the router on ethernet port.login to the linksys GUI and configure it.Check this link.

HT1414 While on the safari app my page cuts out and says you are not connected to Internet but I am clearly connected

While on safari app it cuts out saying cannot display page not connected to Internet but I clearly am

i just had this problem i found my iphone completely flat this mornin and it said to charge i plugged it in my comp and it said to connect to itunes i did and it started loading the software on now works fine

Internet connection failed... when I'm clearly connected to the Internet

I've been trying, for the last 10+ hours or so, to update my iPad to iOS7.
Each time I do, it fails. (Error code 3004)
At the point it failed the iPad has become useless... when I power it up I just get the iTunes logo and the USB plug.
I have tried every single thing listed on the Help page, from changing Firewall Settings, to uninstalling iTunes and all associated programs, to resetting the computer, to connecting directly to my modem, etc etc etc. All this to no avail.
I'm clearly still connected to the internet, but iTunes thinks I am not, and therefore cannot restore/update my iPad.
Any suggestions?

Hi there RaceAddict,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
Test restoring while connected to a known-good network.
-Griff W.

WAAS and the 'show connection statistics command'

HI Everyone
In need of some help in understanding how/where the numbers come from when looking at the how the reduction ratio is calculated.
In an example I can see the following:
                        Original            Optimized
Bytes Read:      390                   157385
Bytes Written:   246821               4251
Total Reduction Ratio: 34.616%
The definition for the reduction ratio in the command reference is "number of bytes that have been read and written on the original (incoming) side and the optimised (outgoing) side".
Taking that logic on the above numbers I see Endpoing ----> WAE reading in 390 bytes ----> WAE sending 4251 bytes optimised to another peer ----> then the WAE recieving the reply from its peer 157385 bytes ---> and sending it 246821 Bytes.
I can understand the last part where the optimised read is lower than the original write, due to the DRE/LZ that is going on but why would the optimised write be higher than the original read??
Likewise here is another example:
                        Original            Optimized
Bytes Read:      6GB              9MB
Bytes Written:    1MB             587MB
Total Reduction Ratio: 90.0
Now - I can see this command is run on a WAE where it is the "Server end" of the connection due the large read value on the Original (LAN) side.
BUT why is the optimised read greater than the original write???
I will be eternally grateful to anyone who can explain this to me ....
Regards

Hi Ryan,
Let me try to explain you.
1st Scenario
This output looks to be taken from the WAE closer to the client.
Original Bytes Read: This is the client request that is sent to the server to the get the data. This is intercepted by the WAE on the original side (LAN)
Optimized Bytes Read: This is the amount of data that the WAE has received from WAN against the original request.
Original Bytes Written: This is the amount of data that the WAE has sent towards the LAN to the client after decoding and replacing the encoded packets with actual data content.
The Reduction Ratio goes like this (Optimized Read + Optimized Write) / (Original Read + Original Write)
= (1 - (157385 + 4251) / (390 + 246821)) % = 34.616%
Scenario 2
The output is from the Server side WAE.
Original Bytes Read: This is the amount of data that the WAE received from the LAN side (which is server)
Optimized Bytes Written: This is the amount of data that the WAE has sent out on the WAN after performing the encoding process.
Original Bytes Written: This is the acknowldgements that the WAE has sent to the server on LAN.
Optimized Bytes Read: This is the amount the data received by the WAE from the other WAE acknolwdgements and other administrative exchange for this session.
So if we apply the above formula in this case:
= (1 - (9 + 587) / (6000 + 1)) % = 90.202%
Hope this helps.
Regards
Kiran

Clearing wireless statistics

On Cisco 1242 AP you can "sh dot11 associations all-client | include Address | Bytes" and this will give you a list of all associated clients and how much data they have transferred. Other than rebooting the AP is there a way to clear those stats so you can monitor from a fresh start?

i agree that will clear the stats for 1 associated client. using a * instead of does not clear all. Clearing the stats on all 23 associated clients is the desired outcome.
Thanks

I have tried everything but iphoto won't export to snapfish. It says check network connection, but I am clearly connected to the internet, email and everything works. I have updated the software reset the PRAM, restarted a million times, please help me!

every time I try to export photos from mac mini iphoto to snapfish is says check network connection, but the internet is working great. I have updated everything i can think of please help.

Several people including myself are having the same issue and have contacted HP and Apple. Quite frankly, I'm surprised it's been an issue for so long being that photos uploaded to Snapfish = $$$. Lets hope they can work this one out, as of now, there apparently is no solution.
Here are a few more threads on the same topic.
https://discussions.apple.com/thread/3317987
https://discussions.apple.com/message/16278246#16278246
https://discussions.apple.com/message/16160533#16160533
Here's a photo of the same issue for the experts troubleshooting the problem out there.

HT4623 Cannot update from iOS 6.1.3 to iOS 7...says that I cannot verify because I am not connected to the internet when I am clearly connected to the internet. I've tried from home and school. Now what?

I am trying to update an iPad 2 to iOS 7. It hasn't updated since iOS 6.1.3. When I try to update it, I get a msg box that tells me I cannot verify because I am not connected to the internet. This is not true because I AM connected to the internet here at school. I've tried at home and it does the same thing. What to do now?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

Clear Connection statistics WAE

Similar Messages

Maybe you are looking for