Clear doubt on standalone IS and integrate with remote BI4

Hi IS expert,
Apologize for this question from a novice user. I just want to know will the metadata manager works well for linear data and impact analysis if standalone IS is installed and not sharing the common Business Intelligence Platform with BI4?
I reckon it should works for IS version 4.2 Patch2 as per Note 1907168 and i just need some confirmation on below question posted on Information Steward Deployment - Guidelines on sharing BI Platform Vs. Standalone Install - Enterprise Information Manag…
Note: - Starting 4.2 SP1 release (4.2 GA release), 'Standalone Deployment' using Information Platform Services offers same level of 'Simplified User Experience for BI users' with ability to view lineage from WEBI report or BI Launchpad as well as ability to access Metapedia terms associated with a report from BI Launchpad. For Information Steward 4.1 or earlier release 'Simplified User Experience for BI Users' was available only when Information Steward was deployed on 'Shared BI Platform'. This limitation is removed in Information Steward 4.2 SP1 release."
What's the exact meaning for the above, does it means starting from 4.2 SP1, linear data and impact analysis should work even without sharing the common BIP platform? And if yes, below steps from note 1907168 should be the right source to configure?
Additional Support
From IS 4.2 SP0 Patch 2, IS supports the lineage/impact and BOE Metadata Integrator with remote BI 4.1 SP1 (or higher compatible patches) when installing DS and IS with IPS 4.0 SP5 on the separate landscape.
For the new installation, the supported landscape is
On machine 1, install BI 4.1 SP1
On machine 2, install IPS 4.0 SP5 (or later patch), DS and IS 4.2 SP0 Patch 2
If users want the BI Launch Pad Integration feature from BI 4.1 SP1 (or higher compatible patches) or want to collect the metadata from BI 4.1 SP1 installed on machine 1, refer to the following SAP Note 1906580 to install and configure the following:
Configuring BI launch pad in Information Steward application
Installing the service to collect metadata from SAP Business Intelligence (BI) platform 4.1 SP1 or above.
Your kind input is very much appreciate.
Thanks,
Nicholas Chang

Nicholas,
this was especially related to the customers who want to use the direct and native integration of the Data Lineage and Impact Analysis Graphs and the Metapedia Terms within the BI Launchpad itself.
Before IS 4.2 SP1 customers who wanted to enable their BI Users to view e.g. directly within the BI Launchpad the information where the data for a specific report was coming from were only able to do that when the IS installation was on top of the BI installation. Now they can even have a separated installation of their BI and IS (on IPS), but are still able to view the lineage and impact analysis within the BI Launchpad.
This does not affect the collection of metadata information from the BI system and also from the beginning of IS it was possible to view lineage and impact analysis or metapedia terms within the IS UI itself, independent of the standalone or on-top installation.
Niels

Similar Messages

Sync and compare with remote

Have just installed DWmx 8 on a new machine and found that
the context
menu for sync and compare with remote is not enabled..
I assume it is something to do with the way I have configured
my sites...
Any ideas???

Can you log into .mac mail? That will tell you if your username and password are OK.
I recently had a similar problem, so I unregistered my work and home computers (using the Advanced tab of .mac preferences) from .mac then re-registered them. At that point, you are offered the initial sync choices like the first time you connected to .mac.
Be careful that you don't overwrite your data. I highly suggest making backups of your Address Book, Safari Bookmarks, iCal, iDisk files, etc. on all computers before starting the process.
- Wayne
PowerMac G5 Mac OS X (10.4.8)

How to create portal user and integrate with external appl login

How to create portal user and integrate the user with external application for single sign-on ?
I want to access my external application thru portal user ..?
Shyam

Hi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag

How to set up a FTP and web server and integrate with DMM 5.2

Hi All ...
I need to set up a external server only for content publishing to reduce the overhead of the DMM server .
can anyone guide me on how to set up the external server and intergrate it with the DMM 5.2
Thanks

semuthu,
Notes from the Release Notes:
Compatibility Limitations with Microsoft Internet Information Server (IIS)
DMPs that use firmware release 5.2 are compatible with only one version of Microsoft Internet Information Server.
That supported version is IIS 6.0 for Windows 2003 Enterprise. If you do not have the supported IIS version but
want your DMPs to retrieve assets from a webserver, we recommend that you use Apache instead of IIS.
I would suggest using Apache instead of IIS for the webserver service. IIS can be used as FTP if needed.
There are plenty of Documents on the Web about setting up Apache and FTP for servers.
Using Apache with Microsoft Windows
http://httpd.apache.org/docs/2.0/platform/windows.html
Quick HOWTO : Ch20 : The Apache Web Server
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch20_:_The_Apache_Web_Server
Once the Webserver is setup and operational. You simply store your media content on the Webserver
and then have your DMS assets in the media library use an external URL address for its location.
If you want to use external server for other features in the DMM, you can can see how to configure
here:
http://www.cisco.com/en/US/partner/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1073210
Goto the section right below ACNS & WAAS..
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

What UPS or AVR Does OS X Detect and Integrate with?

Hi. I think some UPS like the ones offered by APC support OS X software (OS X can detect and perform some stuff with it) using a separate (I may not have the USB slot for that anyway but I can make one free if that feature is really important). Are there any brands that supports OS X?
I'm not that interested in the UPS that has power backup coz' it's too expensive for the VA or wattage for my whole setupwhich includes other gadgets (like a Dremel, and 2 desk electric fans used for some crafts and hobbies) and it may not have as many as 8 outlets which I need. I'm more interested in a UPS brand that is as good as APC or even better at giving the iMac 27" i7 and the other gadgets quality electrict current. I already have a Belkin surge suppressor, do I only need an AVR (which might be too expensive) is the one I should combine the surge supressor with? Also I'd like to support smaller companies than APC that is as good (a kind of charity for the smaller but good companies to keep those smaller ones in business).
The maximum wattage all the gadgets including the iMac is around 635w (APC recommends in their calculator their UPS with 1000VA which is too costly).
I also read that we should avoid UPSes that only have a simulated or modified sinewave (the one to get should be the true sinewave but it's more expensive). What's the story on that?
I've seen other brands in order of availability AVR or UPS: FSP which seems to be designed in the US and is a US company, then there's Buffalo, Intex, Izuki, Voltac, Stac, Matsunaga, Stavor, Intex, Yaden, Cyberpower, Tripp-Lite,
Recommendations are welcome. Thank you in advance.
Gbu.

ummmm the problem is when i sync to Mobile Me my birthday dates change by a day (forward) e.g my birthday is the 8th and when i sync to Mobile Me and check online (www.me.com/contacts) my birthday date is ok, none of them have chage by a day
*BUT*
if i sync back down to another device it will change my birthday to the 9th. (even another mac, iphone, windows XP computer) all computers are set to New Zealand time zone.
(it always changes the dates of my birthdays every day of the week every time i sync. no error comes up it still syncs)
i dont think Mobile Me is offset. but i think in OS X it is.
so the time zone on Mobile Me would be +12 but the time zone in OS X would be offset so making +13
thats what im thinking in my head is that sounding right to you or am i way off haha
thanks for helping by the way.

Flex and CFC with Remote Object

I wrote a simple cold fusion componenet on my webserver at:
http://www.paramountmediainc.com/webservices/eadexchange/agent_sys.cfc
Now I want to play with that in Flex with a Remote Object.
I'm writing the flex on my local machine. I tried this approach but
was uncessfull:
<mx:RemoteObject id="acctRO" showBusyCursor="true"
source="webservices.eadexchange.agent_sys"
endpoint="
http://www.paramountmediainc.com/flashservices/gateway">
I get the following error ...
TypeError: Error #1034: Type Coercion failed: cannot convert
Object@3b15da1 to mx.messaging.messages.ErrorMessage.
Any ideas what I'm doing wrong here?

You cant really replace Struts with Flex, maybe a view part
, thats about is, you still need backend processioning
logic,all that you are asking is difficult to answer is one reply,
IMHO, best thing you can do is to dive into following URLs :
http://www.adobe.com/devnet/flex/
http://livedocs.adobe.com/flex/3/html/help.html?content=Part2_DevApps_1.html
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/
http://livedocs.adobe.com/flex/3/html/help.html?content=Part6_ProgAS_1.html
and of course your best friend :
http://livedocs.adobe.com/flex/3/langref/index.html

UDP Send and Receive with Remote Host Only Issue

I am seeing an issue using the UDP Sender and UDP Receiver example VIs that ship with LabVIEW. If I open the VIs and do not change any of the settings and run the UDP Receiver VI and then the UDP Sender VI the Receiver VI never reads anything. However if I change the boolean on the UDP Sender VI to broadcast it works fine.
The example program by default uses localhost so I have also tried to use the UDP Receiver on my Real Time controller and the UDP Sender on my laptop with the boolean set to remote host only and the remote host string set to the ip address of my real time controller and this did not work either. But if I change the boolean to broadcast it works.
I would like to be able to send to a remote host only and not have to broadcast my UDP message to everyone.
Please let me know if you have any suggestions.
Thanks,
Russell
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor

Elizabeth,
Thank you for the response. I am using LV 8.2.1 and wasn't seeing any errors.
However I am not seeing the issue today, I must have been an issue with our network yesterday.
Thank you,
Russell
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor

ITunes 10.1 and Earbuds with Remote - Can't pause or skip songs on MBP

Since upgrading to Mac OS X 10.6.5 and iTunes 10.1 today, I notice that I can't pause and skip songs with my iPhone earbuds when they're plugged into the Mac. I have a [latest gen 2.4 GHz] 13" MacBook Pro and I could have sworn this was a feature that worked prior to the upgrade. I know it works just fine on my 27" iMac at home, so it's possible that I might be confusing the two systems. All I am able to change is the volume up and down.
Does anyone else have a 13" MBP and a pair of earbuds with the mic? Are you able to click once and pause iTunes and click twice to skip to the next song? I'm so used to doing this on my phone and iMac that I wonder if I am just taking it for granted and maybe the 13" MBP never supported this.
Thanks for any help or tips you can provide.

I've heard others with this same problem in the past. It sounds like a manufacturing problem with the headphones themselves causing the buttons to not work.

Having trouble pairing my iPhone and iTunes with Remote.

So, I know that these are to the ways to use Remote. When trying to pair with an iTunes library, steps 1 and 2 work but when I open iTunes on my computer, the Remote button does not appear. When trying to pair using Home Sharking, steps 1-4 work but my library does not show up for me to select. I am using an iPhone 5S and MacBook Pro, both with the most current versions of iTunes.

Hey brenyo!
Here is an article that will help you troubleshoot this issue with your Remote pairing:
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
http://support.apple.com/kb/ts1741
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Can I manage custom builds of Apache and PHP with Server Admin?

Okay, here's the deal: I have a shiny new Xserver Xeon with Leopard Server installed. I see that it comes with a number of programs that I'll need, preinstalled, but for various reasons (extensions and modules for PHP, Apache, and the like), I may need to roll my own builds of several of these programs and libraries. In this case, the main thing I'm concerned with is recompiling Apache and PHP.
My question is, can I do this and still manage those tools from Server Admin? I'm not averse to doing it on the command line if need be, but I'd just as soon not have to, if I have Server Admin. So, what would I need to do to make sure that I can still use Server Admin with a custom PHP and Apache?

My main interest is in using Wiki Server with the custom Apache and PHP builds. Since that's managed through Server Admin, I figured it would be best to try and integrate with the Apple tools.
Apache I could maybe get by without a rebuild, but there are definitely PHP modules I need which the default build does not come with.

Cannot clear document posted with FBS1 and Reversed with F.81 in F-03

We have recently turned on OIM for a Balance Sheet account and are in the process of clearing it. The postings in this account were generated with FBS1 (Accrual/Deferral Document) and reversed with F.81.
Majority of the documents displayed with FBL3N cleared no problem after open item management was turned on, however, there are a handful that are not displayed in F-03 (or F.13).
Please consider the following when answering:
OIM was turned on for the account using ZRFSEPA02 (Copy of the standard/not-delivered program for turning on OIM).
All of the entries were reversed with F.81 and the header of the documents does not contain a "Reversal Date".
I have already tried turning off OIM with ZRFSEPA03 and then turning it back on again with ZRFSEPA02.
My settings in FS00 are correct for the GL Account.
Hundreds of items were cleared. There are 7 documents that don't appear in F-03 or F.13
Also, please do not give me "Beginner level" information such as "Tick the OIM box for the GL Account in FS00" (You cannot turn on OIM in that manner for an account that has line items posted to it - I have been doing R/3 Configuration for 23 years, so I am an advanced Analyst in the FI/CO Area).
Thanks - Back to searching OSS!

Hi,
Actually when report is executed we get following message
Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Hence, it is risky to execute this report.
Are you getting these documents in FB03 ?
Regards,
Tejas

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

Hi,
I could resolve the issue since there were lot of issues after system copy.
1. During distribued to Cenrtal system - system copy.
You need to combine both DB and CI export copies in one folder during which one thing can happen.
SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
I eliminated this issue also.
After JAVA started I faced an issue with XI related navigations.
ecchangeProfile url still had an entry of Production System. This may be a bug.
After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
Now I can access all the XI related navigations.
I need to also perfrom SGEN and Profiles import.
Do I need to change any additional settings after this so that my production and DR can work without any issue?
Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
Regards,
Rajkumar

Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW

Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW plug-ins. The old 8.4 and the new 8.7. But it doesn't work. Have removed and reinstalled several times. What is going on? Why can't I update bridge to the latest version 8.7 or read my raw files from the Canon 7dmk2?

Try this:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

Integrate with BEA Portal and Lotus Domino R5.0.12

Deal all:
I got a problem when I integrate with BEA Portal and Lotus Domino R5.0.12.
my environment is below:
- Domain Server :
Lotus Domino Server R5.0.12
BEA Personal Messaging API 4.3
(test successful on local host)
- Application Server:
BEA Weblogic 8.15
BEA Groupware portlets 2.5
I got connection successful message when I using "Domino Service Connection"
but I got "CZ: VERSION CONFLICT" error message when I add a new account by
Compoze_Groupware-Edit Account user interface.
Have anybody met the error message before... and know how to sovle the problem..
I appreciated any suggest or comment~~~
detail error message is below:
portlets.compoze.groupware.exception.ConnectionException: CZ: VERSION CONFLICT at portlets.compoze.groupware.controls.provider.SessionControlImpl.createSession(SessionControlImpl.jcs:142) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java:371) at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:433) at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:406) at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(JcsProxy.java:381) at $Proxy19.createSession(Unknown Source) at portlets.compoze.groupware.controls.provider.GroupwareProviderControlImpl.updateAccount(GroupwareProviderControlImpl.jcs:4825) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java:371) at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:433) at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:406) at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:249) at com.bea.wlw.runtime.jcs.container.JcsContainer.invoke(JcsContainer.java:85) at com.bea.wlw.runtime.core.bean.BaseContainerBean.invokeBase(BaseContainerBean.java:224) at com.bea.wlw.runtime.core.bean.SLSBContainerBean.invoke(SLSBContainerBean.java:109) at com.bea.wlwgen.StatelessContainer_ly05hg_ELOImpl.invoke(StatelessContainer_ly05hg_ELOImpl.java:207) at com.bea.wlwgen.GenericStatelessSLSBContAdpt.invokeOnBean(GenericStatelessSLSBContAdpt.java:62) at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.runAsInvoke(BaseDispatcherBean.java:153) at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.invoke(BaseDispatcherBean.java:54) at com.bea.wlw.runtime.core.bean.SyncDispatcherBean.invoke(SyncDispatcherBean.java:168) at com.bea.wlw.runtime.core.bean.SyncDispatcher_k1mrl8_EOImpl.invoke(SyncDispatcher_k1mrl8_EOImpl.java:46) at com.bea.wlw.runtime.core.dispatcher.Dispatcher.remoteDispatch(Dispatcher.java:161) at com.bea.wlw.runtime.core.dispatcher.ServiceHandleImpl.invoke(ServiceHandleImpl.java:436) at com.bea.wlw.runtime.core.dispatcher.WlwProxyImpl._invoke(WlwProxyImpl.java:326) at com.bea.wlw.runtime.core.dispatcher.WlwProxyImpl.invoke(WlwProxyImpl.java:315) at $Proxy11.updateAccount(Unknown Source) at portlets.compoze.content.options.accounts.editAccount.editAccountController.saveChangesAccountAction(editAccountController.jpf:534) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.bea.wlw.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:1512) at com.bea.wlw.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:1447) at com.bea.wlw.netui.pageflow.FlowController.internalExecute(FlowController.java:778) at com.bea.wlw.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:211) at com.bea.wlw.netui.pageflow.FlowController.execute(FlowController.java:608) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484) at com.bea.wlw.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:1504) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274) at com.bea.wlw.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:674) at com.bea.wlw.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:527) at com.bea.wlw.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:152) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507) at com.bea.wlw.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1734) at com.bea.wlw.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1754) at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:561) at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:121) at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:98) at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:150) at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:109) at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:224) at com.bea.netuix.nf.ControlLifecycle$3.visit(ControlLifecycle.java:171) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:355) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:365) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:126) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:105) at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:173) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:137) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:333) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:196) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:772) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:150) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6987) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

Hi,
The reason why you are seeing this exception is because there is a mismatch between the version of the WLPM API used by the portlets, with the version of the service that you have installed on you Domino server.
To explain a little, there are two sides to the API that is used to communicate with Lotus Domino:
1) the Java API side (used by the portlets that you have installed in the portal)
2) the Domino Service side (installed as a DSAPI filter in the HTTP task of a Domino Server)
Each Java API jar and Domino Service Executable are branded with a version number, which in your case does not match because the portlets came with one version of the Java API, and you have installed a non-matching version of the service on the Domino Service side (you probably extracted the executable for the service installation from the "BEA Personal Messaging API 4.3" bundle or installer).
The solution for this is to:
1) uninstall the Domino Service that you have plugged into the domino service
2) extract the Domino Service installer which was included with the portlet bundle. This is located in the "Program Files\compoze\groupware_portlets_bea-2.5\8.1\service\domino" directory if you ran the portlet installer, or in the "groupware_portlets_bea81-noinstall-25\groupware_portlets_bea-2.5\8.1\service\domino" directory if you used the "no-install" zip file.
As a tip, to quickly check whether the versions of the service and Java APIâ€™s that you are using are matching, perform the following steps:
1) hit the domino server with the following URL and notice the "service version": http://domino_service_url:http_port/compoze.czdo. This should be something like "Service Version: 3.6.102"
2)in your portal application (or in the portlet install bundle), open the harmony_portlets.jar file with winzip, then find the "compoze_products_information.properties" file. In this file, notice the "product.domino" version (e.g. product.domino = 3.6.102)
3) the two versions you have inspected must match in order for the connection between the portlet and service to succeed.
If you have verified that the "service" version and "java API" version (located in %portal_app_dir%/APP-INF/lib/harmony_portlets.jar, and you are still getting the exception, it is likely that there is a "harmony_portlets.jar" that included an old version of the Java API located somewhere in the portal server classpath. In this case, make sure that the only harmony_portlets.jar in the classpath is the one that was included with the portlet bundle that you have installed.
Regards,
Lev

Does Eloqua Integrate with MicroSoft Dynamics CRM 2013 and or 2015

We are planning to upgrade from Dynamics CRM 2011 to 2013 or 2015. I cannot find information to confirm Eloqua will integrate with the newer versions of Dynamics CRM. I 'hear' Eloqua will integrate with 2013. Does anyone integrate Eloqua with Dynamics 2013 or 2015?

Hello-
We actually integrate with MS Dynamics, both 2013 and 2015 versions and would gladly help you.
Feel free to visit our website for more info: www.putitforward.com/omc
Here's a video on our YouTube channel about MS Dynamics 15 to Eloqua integration.
Hope this helps!
If you have any additional questions, let me know and I'll send you more info.

Clear doubt on standalone IS and integrate with remote BI4

Similar Messages

Maybe you are looking for