Clear enclosure 23" cinema display with DVi connector?

Hi all,
I went to a local Mac store (Not Apple) where I was shown a supposedly 23" HD cinema display (clear enclosure) with a DVI CONNECTOR directly built in. I was under the impression that all clear enclosure versions natively came with the ADC connector and that if DVI was warranted, a converted was necessary. To my surprise, Apple apparently made two clear enclosure versions, both ADC and DVI. I've verified under the spec. area of this site. But, there were no 23" clear enclosure with DVI, except of course, the current 23 version which is the aluminum. So, was the more likely scenario that this rep. had shown me a 22 with DVI or is there really a 23 version with DVI. I was convinced at the time myself that it was a 23 clear enclosure version with a DVI connector. I saw with my own eyes that this display did not have a converter connected and it looked like the 23 as opposed to a 22. The 22 & 23 looks so similar and can be mistaken for each other. One of the ways of identifying readily is that the 22 has the power/brightness controls near the bottom right of the casing. Could someone confirm either way. Thanks!

Hi-
I agree that the rep probably showed you a 22" DVI model. See page 8 of the 22" Cinema Display Manual for the cabling of the display.
You will see the DVI version of the Cinema Display listed in this article. The article was put out prior to the Aluminum housed ACD release.

Similar Messages

  • Apple Cinema Display with DVI to VGA graphic adapter... HELP

    A friend of mine has a PC (Windows XP based) and is using the Apple Cinema Display. Since his graphic card has both vga and dvi slot, he can plug the monitor to DVI and got it working, but when he tried to plug it into the VGA slot using DVI to VGA converter, it did not work. Is there a need of special converter or adapter?

    Hi royz86,
    To run a DVI display off a VGA output, you need a rather expensive converter box. These converters vary in performance, reliablility and application possibilities and certainly don't compare with using a native DVI output.
    Your friend was probably trying to use a DVI to VGA adaptor (which won't work "the other way around"). It works by grabbing the analogue signal that is included in a DVI-I output and setting up a VGA output that way. These don't work with DVI-D outputs, by the way.
    Cheers!
    Karl

  • 23" Cinema Display with DVI-ADC Adapter.  Won't turn on with 8800 card...

    I am running Windows XP on a pc. I have had the ACD 23" with the DVI to ADC adapter for 4 years now and it has been flawless. I ran this using an nVidia 6800 Ultra card and then an 8800 GTS 640 MB card. All was well. I just got a 2 new cards for 2 diferent pc's and neither will recognize or turn on the monitor. Both a brand new HD 2600 pro ATI card and an NVidia 8800 GTS 512 card. The monitor works fine with my 2 PC laptops via their DVI connections and my MBPro. So it appears the monitor is fine. This is not the "can't see the monitor in the bios" issue, I can't even use it as an additional monitor in dual view mode when at the desktop as it is not recognized as being connected. Any ideas?
    PS I also applied the latest bios update to the nVidia card from EVGA.
    Thanks,
    Reed

    Did anybody find a solution for this?
    I bought a new T420s. The second week I had to send it in service because it was not turning on anymore. I couldn't convince them that the laptop suddenly restarts several times a day. And only after two weeks when it did not start anymore they told me to send it in the service.
    No they brough it today. They made my day happy for 10 minutes until I turned it on and the wireless problem described in this topis apeared. The Inetl diagnostics tools installed with the card say: "Hardware radio is off". It worked before being send into the service.
    Now, the wireless switch is on and I see the adapter installed by "no wireless connections available".
    Pressing Fn-F5 it tells me to turn on the radio (the switch thing). But that is already turned on.
    So I called again to ask them what is wrong. They told me they would send me a new mini wireless card that I can replace myself. I received it today, replaced it. BUT THE SAME BEHAVIOR!!! (((((((((((((((((((((
    So I wonder, can the service guys (Wädenswil, CH) be so unprofessional to have forgotten to connect/enable the switch button?
    PS:
    1. The wireless LED is not turned on at all.
    2. BIOS has wireless enabled
    3. Device Manager sees the unknown network adapter (when driver uninstalled) and the Intel Wireless adapter (when driver installed)
    (This double failure means a divorce from Lenovo products for me. Once I solve this issue I sell the laptop.) Yes I know service is better than other, but I want something that doesn't need it at all.
    At least the Dell guys send a guy (freelancer service guy) at my place to fix the isssue. Now it is not only the costs for shiping it and investigate the problem (that are on my side) but also the productivity problem now costing us more than one month not beneffiting 1 minute from this laptop.
    A very sad,
    Gabriel

  • Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    I believe you naeed the Apple ADC to DVI adapter.

  • Acrylic 20" Cinema Display with new MacPro

    As I read the posts here, to use the old cinema display with an ADC connector I will need to buy Apple DVI to ADC adapter to connect my 20" cinema display with ADC to the new MacPro?
    This new DVI to ADC adapter provides power for the cinema display as I understand which is why it's so expensive whereas when cinema display was connected to my Powermac G5 the power came thru the ADC connection?
    Is this correct?
    Message was edited by: Gary Tate

    Is this correct?
    Yes.
    (46131)

  • Sharing Cinema display with a PC

    Is there a way to share (via a swith box) my 20" cinema display with a PC. I know that there are DVI switchers but do they support the fact that the MAC display is powered through the connector interface aand that the firewire and usb is on the same connector as well???
    Thanks

    The DVI connector does not carry the power to the display. The cable from the display carries the power, USB, FireWire, and digital signals. At the computer end it is split into separate cables with plugs for USB, FireWire, power and DVI.. The switch would go between this DVI plug and the DVI connector on the computer's video card. The power would not go though the switch. The fancier switches will also have sockets to switch the UBS as well, so a keyboard and mouse plugged into the display will switch to the computer using it. This will also allow computer control of the display brightness.

  • CAN I USE MYApple Cinema Displays WITH MY MAC BOOK PRO

    CAN I USE MYApple Cinema Displays WITH MY 13"mac book pro

    Your 2014 MacBook Pro should have 2 Thunderbolt ports and 1 HDMI port.  We need to find out what plug your Cinema Display has.
    Does the Plug look like this:
    http://www.bluejeanscable.com/store/dvi-cables/dviiplug.jpg
    If so, then its a DVI connector.   And you would need a Thunderbolt/Mini Display Port to DVI adapter.
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
    If not, look on the underside of the Display's frame or base/stand, there should be a model number there.

  • Can I use a 30" Apple Cinema display with a new 27" iMac?

    I have a brand new iMac(27-inch, Late 2013), OS X Mountain Lion (10.8), i7 3.5 GHz, 32MB RAM, 4GB NVIDIA.  I will soon be upgrading it to Mavericks, if that makes a difference.  My understanding is that the resolution on it is 2560 x 1440.
    I'm looking at buying a used 30" Apple Cinema display.  I'd like to use it with my new iMac.  The only advantage for me would be that the 30" screen is larger and things on it easier to see (or so I'm guessing).
    I need to know if the 30" Cinema display would work with my new iMac, and if it would, as I'm guessing, give me a larger, easier-to-see screen.
    I currently have my new iMac connected to my old mid-2010 iMac as a target display (that old iMac has a minidisplay port--no Thunderbolt), and that works great.  I just want a larger screen.
    I called Apple support, and the tech rep wasn't sure it would work.  He seemed to think that the 30" Cinema displays were made with different connections.  Some had minidisplay ports (which he thought would work), and some a cord built into them that provided some other type of connection (that I guess would not work as far as he knew).
    Can anyone tell me if this would work?  Would my new iMac and its video card support the 30" Cinema display?  Would the result be as sharp and good-looking as my iMac's built-in 27" display, but only bigger (which is what I'm hoping for)?  Any advice is appreciated.
    I don't yet know many of the specifics of the 30" Cinema display I'm considering.  I know it is about 3 years old.  And here is a picture of the back of it:

    Yes, you should be able use the 30" Cinema Display with your new iMac without problems. You'll need a mini-DisplayPort to Dual-Link DVI adapter:
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
    I haven't had the 30" myself to test so I don't know if there any caveats. Perhaps someone else here will have personal experience.
    Regards.

  • How to connect 22" Apple Cinema Display with ADC to Mini DisplayPort?

    What are my chances to connect a 22" Apple Cinema Display with ADC connection to my new MacBook Pro with its Mini DisplayPort? Is there a combo possible of some adapter with some cable for instance?

    You need a Mini DisplayPort to DVI adapter
    <http://store.apple.com/be-fr/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTEwMjYzNzQ>
    followed by a DVI to ADC adapter
    <http://store.apple.com/be-fr/product/M8661Z/B?fnode=MTY1NDA5OQ&mco=MTE0ODUyODQ& s=topSellers>

  • Installation of 27" cinema display with macbook pro silver key and bootcamp

    For everyone out there who may be interested in using the new 27" cinema display with an older Macbook Pro Intel with silver keys and bootcamp.
    What is needed:
    1. Apple 27" cinema display.
    2. Macbook pro Intel silver key model
    3. Altona Dual Link DVI to Mini DisplayPort Converter (Model AT-DP400)
    4. Bootcamp 3.1 drivers from Mac OSX Snow Leopard V10.6.3(retail)
    Procedure:
    1. Update your display software on the Mac OS side. Apple has posted an update on their software downloads page, "LED Cinema Display Software Update 1.0" After doing so, make sure that the 27" CinDisp is operating correctly and you can change the brightness from the system settings.
    2. On the Windows side, install the bootcamp 3.1 drivers. These are on the Snow Leopard distribution CD. However, there is a bug in the .msi installer that causes the installation to go into an endless loop. This must be resolved during the installation of the drivers. The following article discribes how to do this:
    http://discussions.apple.com/thread.jspa?threadID=2305631&tstart=0
    3. After you have successfully installed the bootcamp 3.1 drivers, then install Apple's bootcamp update: "Apple Magic Trackpad and 27-inch LED Cinema Display Update for Windows 32 bit".
    Good luck, it works!

    I have the same MBP and recently bought a 23" cinema display on Craigslist for $140.  It works great.  I had a display port to DVI adapter and it worked fine.  Built a stand to hold the laptop vertically so it's out of the way.  Don't know about older displays but anything with DVI should work fine.
    The screen size and resolution are great for photo editing.  I now have the best of both worlds, a display that rivals my wife's iMac and portability.

  • I have a 27" Flat Panel Cinema Display with a failed LED panel. How much would this cost to get fixed?

    Just wondering if it's worth it to get fixed, or if I should just save my money for a new one. It is currently out of warranty. Any information would be great!

    Save your money.  The repair costs will be the same as buying a brand new Cinema Display.  Dell sells the same IPS display with different connectors, but they include a 3 year warranty.

  • How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
    (119682)

  • I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    Hi Gilly,
    I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

  • Can I use a thunderbolt display with dvi video card?

    Can I use a thunderbolt display with dvi video card?

    Nope, you can only use it with a Thunderbolt port.

  • 30'' Cinema Display with mini-display-port to dual link DVI adapter usb hub

    Hi all, I don't know if any one of you experience this issue and can help me.
    I am using an unibody macbook pro (late2008 model) to connect to a 30'' cinema display via the famous $100 mini diaplay port to dual link DVI adapter. I have connected the usb cable from the ACD to the adapter and the usb cable of the adapter to my macbook pro. This setting works fine under OSX 10.5.7.
    When I am using Windows Vista under bootcamp the USB hub on the back of the ACD doesn't work. The device manager of Vista shows an excalmatory mark besides the device "Generic usb hub"; and it reports a problem of "the device cannot be started".
    I doubted this problem is due to Windows cannot recognise the $100 adapter as a "generic usb hub"; and apple has not release a driver for this $100 adapter for windows.
    Since my MBP only has 2 usb ports and the $100 adapter already occupied one, it would be very much helpful if the usb hub of the ACD can work just like in OSX. Can anyone think of any suggestion?
    Much appreciated for reading this post and thank you.

    i don't have an answer for you, but i feel your pain. very frustrating when this happens with Apple products and Vista/Bootcamp. wish they were more compatible, for it would make things so much easier for the consumer.

Maybe you are looking for

  • Schedule ME2L in background and send output to email address

    Hi, Our Client has a requirement to schedule ME2L (particular variant) in background. The report should run every day in background and output should get emailed to particular email address. Any ideas??? Pleae let me know.

  • Two users can't login to Bonjour, but other users can

    All the Macs in my house are set to log into iChat on startup, which creates a defacto messaging network around the house. Quite handy. But now, on one particular machine (a G5 iMac iSight) two users can't seem to log into Bonjour, although on the sa

  • Restriction of Workflow.

    Hi,     I am standar workflow for PO release with little bit customization. Its working fine. Now I need to restrict, the work flow for only some document types. Ex: EKKO-BSART = 'NB' then workflow should be triggered for only type NB. Please help me

  • XML Data Load to BW

    Hi All, I tried loading the XML data to BW using the how to document. everything is fine but in the final stage when i send the recordset uisng the HTML file given in the document its gives an error "Object Expected". I tried a lot but not able to so

  • Updated my Mac 2008 to Yosemite and Update Does Not Complete

    I've recently updated my Mac's software to Yosemite, and it has been uploading for over 12 hours and the bar is still half way full!!! please help