Clear journal data

Hi
When I run the Clear package the data stored on JRN_Adj is not removed from the fact tables.
Why is that?
How should i clear data for a selection and get data for all data sources cleared?
Any extra step I need to consider when deleting journal data.
Jesper

It is about fundemental method of how BPC is using Microsoft OLAP database.
If you run clear package, BPC is calculating delta value between current and zero. And submit that delta to make value of destination region to zero. So, you cannot completely eliminate any record in FACT, FAC2 or FACTWB tables by data manager packages.
However, if you want to remove records explicitly, you may run SQL query to delete them. But I doubt about reason. Any particular reason?
If you do unpost journal, it is also going to submit delta to FACTWB table. Or you can delete journal table manually. It is ultimate way and somehow risky.
If it is necessary in your business, I suggest to do this.
Full optimize with compress data.
Unpost all journals on JRN_Adj.
Full optimize with compress data.
It is based on scenario that no one sent any data to JRN_Adj by Excel or ZFP but journal.

Similar Messages

  • BPC 10.0 NW - Journal data when clearing the data

    Hej Gurus,
    I have a quite simple question:
    When a journal i created and posted in the system, the journal is stored in a specific table for the model, and the data is stored in the cube. What is going to happen with the journals, if we clear the cube for all data, both journal and non-journal data. Will the journals still be posted in the journal table?
    The reason is, we have some scattered bad data that we would like to have cleared, and we want to know, if we can delete all data and import everything again without the journal postings are gone.
    Best regards,
    Mikkel Kristensen

    Hi Mikkel
    Journal stored in Journal Table along with BP Cube. Any point of time you want to delete due to Bad data. First you have to Unpost Journals that means No Effect in Journals or No Financials update. Then you can clear BPC Cube data.
    When you are ready for Journals  just simply Post from Unpost Journals. This process will ensure your data integrity.
    Otherwise you will have to face again bad data issue.
    In Short :
    When you decide to Delete Data from Cube:
    1. Unpost Journals from Post
    2. Delete Data from BPC Cube( from Backend)
    3,  Re-load Transactional Data
    4. Post Journals from Unpost
    Hope this will help you
    Thanks
    Venkat

  • How Long will it take to reset the 16gb ipad with clear all data in it.

    How Long will it take to reset the 16gb ipad with clear all data in it.

    I have the same problem. I try to reset my ipad / iphone 3g using the reset and delete all content on general. It is almost 2 days now but my ipad / iphone 3g are not yet finish. Only apple logo / looping circle appears on the screen. What will i do? thanks... iOS 5.0.1

  • May I clear all data in my cloud and start over

    I have had a joint Apple account with my wife. I want to get a separate Apple account for her and then clear my data on the could and use the current account as only mine. How may I do that?

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (120133)

  • Can't view changed data in journal data

    Hi,
    I have implemented JKM Oracle 10g Consistent Logminer on Oracle 10g with the following option.
    - Asynchronous_mode : yes
    - Auto_configuration : yes
    1. Change Data Capture -> Add to CDC, 2.Subscriber->subscribe (sunopsis),
    3. Start Journal
    The journal has been started correctly wothout errors. The journalized table has always the symbol "green clock". All is gook working.
    And then i inserted 1 record in source table, but i can't view changed data in journal data. I can't understand why journal data was generated.
    There are no errors.
    Help me !!!

    Did your designer was on the good context ?
    Look the list box at the top right of the Designer interface.
    You must have the same as the one where you define your journalization.

  • Some music files do not show up in google play music app library.  I did clear cache/data and restarted phone.  The music is stored on the SD card.  Most of the music in the library is in the same folder on the sd card.  I can play the song from file mana

    some music files do not show up in google play music app library.  I did clear cache/data and restarted phone.  The music is stored on the SD card.  Most of the music in the library is in the same folder on the sd card.  I can play the song from file manager, but it still is not in the music library in play music.

    Cyndi6858, help is here! We'd be happy to help figure this out. Just to be sure though, the Droid Maxx should not have an SD card. Is this the Droid Razr Maxx? How did you add the music to the device? Are you able to see the files and folders located on the SD card or device when plugged in?
    Thanks,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • How to clear the data in my page after user enter submit button

    hi......
    how to clear the data's in my page after user enter submit button. Actually while pressing first time itself the data is uploaded in database.

    Hi Nazeer,
    Instead of doing it on the same button better create a separate button for this functionality, As per my understanding you want to clear these fields to create new record so that you can enter a new record so for this you just need to insert a new row in VO.
    Still if you want to do it on the same button then you need to put the check that particular record is not dirty if it is not then create new record else create new record.
    One more thing if you will clear on the second click of a button how will you update your record??
    Regards,
    Reetesh Sharma

  • Clearing Document Date do not follow the define clearing date in F-03.

    Hi,
    Clearing Document Date do not follow the define clearing date  BKPF-BUDAT in F-03.
    My user received the unpresented check statement from the bank on 31 Dec 2010. As 1 Jan 2011 is holiday and he came back to the office on 5 jan 2011. He post manual upload (Debit : Bank Outgoing and Credit : Unpresented Cheque) posting date 31.12.2010 (period 12/2010 and 01/2011 still open) . Hence the next step (same date on 5 Jan 2011) is to clear the Bank outgoing using F-03. He put 31.12.2010 as his Clearing date BKPF-BUDAT but when the system post the clearing date is 04/01/2011.
    Please help

    Hello,
    Hope it helps.
    But i can recall for the EBS bank statement upload into a previous fiscal year, ie, 31.12.2010.  I had to close the current fiscal year temporarily.
    See what happens in your system when it tries to clear with F-03.  Though as mentioned re-check as F-03 will default to the system date --- today.
    Regards
    Waza

  • Clearing the data buffer from the input fields

    Hi,
    I am using an user exit CONFPP02 for the Tcode: co11n. I have written a program such that the confirmation numbers having the status CNF will not be allowed to be processed. The whole confirmation is terminated when the system checks the confirmation number and its status as CNF. If the status of the confirmation number is PCNF, the program allows the further processing of the Tcode Co11n.
    The problem starts when the user enters the PCNF status confirmation number and enters, the system stores the values in the various input fields. Now without exiting the initial confirmation screen, if the user replaces the Confirmation number of the PCNF status to the Confirmation number of the CNF status , the system issues a warning message:"  Confirmation no. or order/sequence/operation has been changed
    However, the input fields still contain default values from thepreceding confirmation". if the user says yes, the program written is bypassed , thus allowing the reconfirmation of the CNF confirmation number  into PCNF confirmation number .
    Can anybody suggest a suitable method to clear the data stored defultly in the input fields so that the program can be made to work.
    With regards,
    Avinash.S
    Mobile no:09996192456

    Hi Gilad,
    I never use Preview and did not use Preview at all before sending the document over to my most recent client either.
    I only opened Preview up this morning after I discovered that all of the form data had disappeared on his end! And the only reason I opened up Preview was because I already knew it looked fine in Acrobat so wanted so wanted to view the form in a different application.
    My client would not even have notified me about it had he not sent the signed form back to me and I saw there was no data there! I then called him and asked him about the missing data and he said that he thought I had simply sent over the form purposely with blank fields:(
    I have just emailed him to ask him what application he opened it up in. My understanding is that he is on Windows because ne mentioned to me his company was using Windows when we last spoke. Perhaps he has a personal Macbook where he opened it? I just don't know and can hopefully soon find out:)
    But THANK YOU for letting me know about that script! I appreciate it:) I have now downloaded and installed it and will just have to use it on ALL of my forms before sending them out:)

  • CDC Error (JOURNALIZED DATA is not loading into tartet database)

    HI,
    I have enabled source database for CDC and got green mark on source database model tables.
    while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
    when I run the package/ interface JOURNALIZED DATA is not loading into target database.
    i have implemented cdc for 7 source table.
    and using JKM MSSQL Simple
    and enable JOURNALIZED DATA in interface level.
    and
    source database is : MSSQL Server
    Target Database : Oralce 11g.
    please advice me.
    thanks in advance.
    Zakeer Hussain

    Zakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
    also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
    Still not able to figure out please tell us which step the data is not flowing through we will try to guide you.

  • Using journalized data in an interface with aggragate function

    Hi
    I am trying to use the journalized data of a source table in one of my interfaces in ODI. The trouble is that one of the mappings on the target columns involves a aggregate function(sum). When I run the interface i get an error saying "not a group by expression". I checked the code and found that the jrn_subscriber, jrn_flag and jrn_date columns are included in the select statement but not in the group by statement(the group by statement only contains the remiaining two columns of the target table).
    Is there a way around this? Do I have to manually modify the km? If so how would I go about doing it?
    Also I am using Oracle GoldenGate JKM (oracle to oracle OGG).
    Thanks and really aprreciate the help
    Ajay

    'ORA-00979' When Using The ODI CDC (Journalization) Feature With Knowledge Modules Including SQL Aggregate Functions [ID 424344.1]
         Modified 11-MAR-2009 Type PROBLEM Status MODERATED      
    In this Document
    Symptoms
    Cause
    Solution
    Alternatives :
    This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
    Applies to:
    Oracle Data Integrator - Version: 3.2.03.01
    This problem can occur on any platform.
    Symptoms
    After having successfully tested an ODI Integration Interface using an aggregate function such as MIN, MAX, SUM, it is necessary to set up Changed Data Capture operations by using Journalized tables.
    However, during execution of the Integration Interface to retrieve only the Journalized records, problems arise at the Load Data step of the Loading Knowledge Module and the following message is displayed in ODI Log:
    ORA-00979: not a GROUP BY expression
    Cause
    Using both CDC - Journalization and aggregate functions gives rise to complex issues.
    Solution
    Technically there is a work around for this problem (see below).
    WARNING : Oracle engineers issue a severe warning that such a type of set up may give results that are not what may be expected. This is related to the way in which ODI Journalization is implemented as specific Journalization tables. In this case, the aggregate function will only operate on the subset which is stored (referenced) in the Journalization table and NOT over the entire Source table.
    We recommend to avoid such types of Integration Interface set ups.
    Alternatives :
    1.The problem is due to the missing JRN_* columns in the generated SQL "Group By" clause.
    The work around is to duplicate the Loading Knowledge Module (LKM), and in the clone, alter the "Load Data" step by editing the "Command on Source" tab and by replacing the following instruction:
    <%=odiRef.getGrpBy()%>
    with
    <%=odiRef.getGrpBy()%>
    <%if ((odiRef.getGrpBy().length() > 0) && (odiRef.getPop("HAS_JRN").equals("1"))) {%>
    ,JRN_FLAG,JRN_SUBSCRIBER,JRN_DATE
    <%}%>
    2. It is possible to develop two alternative solutions:
    (a) Develop two separate and distinct Integration Interfaces:
    * The first Integration Interface loads data into a temporary Table and specify the aggregate functions to be used in this initial Integration Interface.
    * The second Integration Interfaces uses the temporary Table as a Source. Note that if you create the Table in the Interface, it is necessary to drag and drop the Integration Interface into the Source panel.
    (b) Define two connections to the Database so that the Integration Interface references two distinct and separate Data Server Sources (one for the Journal, one for the other Tables). In this case, the aggregate function will be executed on the Source Schema.
    Show Related Information Related
    Products
    * Middleware > Business Intelligence > Oracle Data Integrator (ODI) > Oracle Data Integrator
    Keywords
    ODI; AGGREGATE; ORACLE DATA INTEGRATOR; KNOWLEDGE MODULES; CDC; SUNOPSIS
    Errors
    ORA-979
    Please find above the content from OTN.
    It should show you this if you search this ID in the Search Knowledge Base
    Cheers
    Sachin

  • How to clear GPS data?

    I have some shots that have been tagged with incorrect GPS data, and imported to LR. Is there a way to clear this data in LR's database?
    Micke

    No. Your only solution is to use a third party utility like ExifTool to clear GPS data or GeoSetter to correct it, then read back the metadata. Don't forget to save metadata before doing this, to make sure your files are in sync with your Lightroom catalog.

  • Clear the data region using Maxl

    Hi,
    I am trying to clear the data region using Maxl query, I am getting error like: Dynamic members not allowed in data clear region specificaion.
    +alter database 'PGSASO'.'ASOPGS' clear data in region 'CrossJoin(CrossJoin({[Actual]},{[FY11]}),{[Inputs].Levels( 0 ).Members})';+
    (Inputs( not a dynamic member, parent of this meber is a dynamic) comes under Account dim).
    I have tried the below code also(Syntax error in input MDX queryon line 1 at token ',').
    alter database 'PGSASO'.'ASOPGS' clear data in region 'CrossJoin([Inputs].Levels(0), CrossJoin({[ACT]},{[FY11]}))';
    Can anyone do let me know if there is any syntax error or alternate function would be available for clearing level-0 members/descendants under Dynamic parent...
    Thanks,
    Bharathi

    There is no syntax error in your statement. The problem is you input dimension(I guess) has some members with formulas on them and the clear statement does not allow those members to be in the clear. Ther ware a couple of ways around it. seperate out the members with formulas under a different parent and then modify the crossjoin to only pick up the level zero members that are not in that parent or you could put a UDA on formula members and use the exclude command to exclude anything with that UDA

  • Clearing the data on logout

    Hi all,
    Flex newbie here.. I just want to know how to clear the data
    that i fetched from server on logout. My application have multiple
    components and each component have different states. Once i logout
    and login, am getting the previous state before i logout. How to
    solve this problem? please help me out.

    I'd start with the "loginResultHandler" function and use it
    to direct the user to a specific component within a ViewStack
    whenever they login or log back in.
    For example:
    [Bindable]
    private var currentUser:User = new User();
    private var currentFunction:Function;
    private function loginResultHandler(event:ResultEvent):void {
    currentUser = event.result as User;
    if (currentUser.loggedIn)
    if (currentUser.roles == "admin")
    Application.application.myViewStack.selectedIndex=0;
    else
    Application.application.myViewStack.selectedIndex=1;
    loginForm.visible=false;
    currentFunction.call();
    else
    Alert.show("Login unsuccessful", "Server Authentication");
    This may or may not be the answer you are looking for but it
    should get you going in the right direction. Check out some of the
    great Flex tutorials at Lynda.com (
    http://movielibrary.lynda.com/html/modListing.asp?pid=205)
    Good luck!

  • Any way to clear application data in b2g/Firefox OS?

    Is there any way to clear application data without uninstalling the whole app?
    Say an app signs someone into Google, there is no way to clear that account data without directing them to a Google logout page. It would be nice to just be able to clear all the login/cookie data that gets stored in the app. This is useful with OAuth - the tokens can be cleared but the Google account can't be logged off (easily).

    There doesn't seen to be a way to clear data at this moment for apps, you can have a look into app permissions or try deleting the app and reinstalling.

Maybe you are looking for