Clear old assets?

In Dreamweaver MX, I have deleted several old Templates. They
appeared to be gone from my site, but when I closed and reopened
Dreamweaver and clicked the Assets tab, they are back. I cannot
delete them again, because Dreamweaver can't find the files. They
are not listed in the Templates folder. Is there a way to clear
this list so that only the templates which current exist will be
listed?

"Recreate Site List" did the trick. Thanks!

Similar Messages

  • FIXED ASSET : Import old asset in SBO ?

    Hi,
    I'm trying to import old asset in SBO which have been totally amortized for end 1998, and it seems impossible to do it.These assets are used and net to be in the Assets Book with one resdual value equal to 1.
    Is there any limits for importing old assets ?

    post in SBO forum

  • TimeMachine not backing up, as hard drive is full. Can the time machine clear old backups and replace them with new?

    Time Macine not backing up.
    As the harddrive is full, Can the time machine clear old backups, and override them with new backups. For example 5 - 6 days +++ old. Backups were proformed dayly
    Any help much appreciated
    Many thanks,

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Asset Report with old Asset Number in the Second description text field

    I have a requirement for a report in the Asset accounting.
    User wants a report where in he can see the asset details with the legacy asset number which is entered in the second description field in the Asset Master.  I executed the available reports and could not find one like that.  Please help me out.

    You have the option to ad this field to the reporting stucture.
    Wy you have ased this field and not the fields in the tab origin for old asset number?
    For extra fields in the asset see the Wiki
    http://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV
    for all the wiki's from asset accounting go to the link:
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Asset+Accounting

  • GRIR Clearing (old items)

    Dear all,
    could someone make a suggestion on how to clear open items on the GRIR account that are over 6 months old. MR11 is run on a monthly basis, yet I have some open items in my reconciliation dating back until 2003. I would like to get rid of them but are not able to make manual postings on the GRIR account.
    Sincerely,
    Lucas

    Hi,
    It is not recommended to post manually on GR IR account.
    You should try to clear this difference with MR11, it is possible to clear old items with the current date.
    Rgrds,
    Miroslav

  • Add depreciation area to old assets (revaluation area)

    Hi guys,
    I've created a new depreciation area for setting revaluation of assets. This new dep area only contains revaluation of assets (we'll only have revaluation and depreciation of this revaluation in this new area), so I've configured it to manage only revaluation values. Acquisition values are not allowed.
    In OABC i've put "00" in the area where this new area takes values from, due to i don't want thhis new area to copy acquisitions values from area 01.
    I've made the rest of the configuration also, to support revaluation transactions (mov 800) in this new area. But, I've got 2 problems now:
    1. The new area i configured is missing when creating a new asset in AS01. However, when using AS91 the new area shows up. Any idea of why this happens that way?
    2. I cannot add the new area in old assets. When using AFBN a message appears: "Depreciation area 20, which you want to create as a new depreciation area in chart of depreciation PVPE, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area."
    Message makes sense, because my new area is not copying values from any area (in tcode OABC i defined 00 as dep area source). The question is.. is there any additional tcode where i can add the new depreciation area to old assets?
    Thanks in advance.
    Eduardo

    Hi,
    there are the following steps:                    
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :
       3.1 - Indicator: Leave values initial = not ticked.              
               The system will copy all the past years values from      
               depreciation area 01.                                                                               
    3.2 - Indicator: Leave values initial = ticked.                  
               Set this indicator if you want to open the newly created 
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.     
    Following notes for information:
    430618     Procedure for setting up new depreciation area   
    857601     Parallel currency area and RAFABNEW              
    301113     Restrictions of RAFABNEW        
    A Documentation you can find in SE38 entering the   RAFABNEW and press the button documentation.
    regards Bernhard

  • Clearing old emails addresses on iPhone

    Is there any method to clear old or incorrect email addresses to prevent them from popping up in auto fill?

    Thank you but that isn't what I meant. When I write an email on my iphone, several email address for the same person will pop up while I know only one is still good.  It's no longer in my address book but continues to show up.  After more investigating, I found out that prior to version 7, there isn't any way to delete old email addresses unless you reset the phone. With version 7, there is a button next to any email addresses that may pop up that are no longer relavent.  If you click on the button, an option is to delete it. You can also create a contact using it if wanted.  So, I appreciate your help. Maybe my research helped you out! 

  • Asset Cost not transferred from Asset Clearing to Asset Cost Account

    Hi,
    There has been a manual Asset-123 added for which the asset cost has not been transferred from the Asset Clearing to Asset Cost Account.
    While, the other additions done for other entities have been transferred successfully.
    Im trying to figure what could be the issue..
    Thanks in advance.
    Edited by: user645075 on Sep 1, 2008 12:27 PM

    Hi Shrutika
    It appears as is if there is some issue with the configuration of your GL / configuration of GL with AA. Please refer to the following [link|https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting]  on this site. This provides you excellent stuff on Asset Accounting.
    Regards
    Virendra Malik

  • How to Get or View Old Asset Number

    I want to view or get the old asset number loaded in LSMW using the field OLDN1. Kindly help me
    Thanks

    resolved

  • Go live   during fiscal year   How to transfer old asset to system

    my project will go live on 1 august 2007 (i run depreciation to July )
    and i configure specify transfer date/last closed fiscal year = 31.07.2007
    and specify last period posted in Prv. system (transfer during fiscal year) = fiscal year 2007 period 7
    my problem are
    1   I cannot upload old asset that capitalized on year 2007 (ex. 01.01.2007)
        my upload customized program tell message Field RALT_DYNP_STRUC-ANBTR02 (6) is not an input fiel
        i try to manually upload by use T-code as91 create asset that capitalized date on 01.01.2007
        SAP system provide asset code but i cannot post value of asset
    2   old asset that capitalized date is before year 2007 (ex.20.10.2006) can be uploaded
    but when i see posted value(in asset explorer)  depreciation will posted only in period 8 there will not post depreciation on period 9,10,11,12
    Please help me.

    Hi,
    For conversion the most easy way is to the last date of last fiscal year:
    31-12-2006 and create the assets capitalized after 31-12-2007 with the normal transactions in SAP.
    In period 7 you run an unplanned depreciation run up to period 7
    I have seen in some versions you create the asset with AS91 and then change the values with AS92.
    For 2 you have to look to your depreciation keys, it schould be working
    Paul

  • Error: "Depreciation start date required in old assets data (please enter)"

    When , I use transaction AS91 , for an asset , with book depreciation key  = 0000, the system shows this error:"Depreciation start date required in old assets data (please enter)",
    somebody could help me with this please?

    Check if the depreciation start date has got populated in the tab for depreciation areas in AS91.
    Usually this gets populated based on capitalization/creation date.If not then try to enter this manually.
    Thanks and regards
    Kedar

  • Please can someone explain how to retrieve deleted text, I was clearing old text when one came through at the same time so was also deleted.

    Can someone please tell me how to retrieve deleted text. i was clearing old texts when a new one came through at the same time and was deleted also.  My last update was  iOS 8.1.2

    You restore from a backup that was created after the text was received but before it was deleted.
    But if you literally deleted it right after it came in, then it's not recoverable.  Have the other person resend the text.

  • Create old asset in SAP

    Hi!
    I have a old asset that I wan't to create in SAP.
    I can't do it by transaction as91 because of this:
    Closed fiscal year does not agree with legacy data transfer date
    Message no. AC199
    Diagnosis
    The closed fiscal year 2007 does not agree with transfer date 30.06.2000.
    If you wish to carry out a transfer within the fiscal year, the date of the legacy data transfer has to be in the year following the closed fiscal year.
    Example: Transfer date July 1, 1993; closed fiscal year 1992
    In any other cases the transfer date has to be the last day of the last closed fiscal year.
    Example: Transfer date December 31, 1993; closed fiscal year 1993
    Procedure
    Correct your entry.
    How can I do it?
    Please help!!
    Thanks in advance.
    Regards.

    Hi!
    First, thank you for your answer.
    Sorry, I think my explication was not very good because of my level of english.
    I read this for NEW company codes and I did with the transaction as91.
    But now I have one asset in one OLD company code. All assets were introduced in SAP in year 2000.
    But there is one asset that was not introduced.
    Now I can't use as91, or I should change the transfer date, and I'm not sure if this date can be changed or affects the rest of assets for this company code.
    Thank you in advance.
    Regards.

  • Delete the transferred values using the transaction for changing old assets

    how to Delete the transferred values using the transaction for changing old assets.
    i want delete the my asset.
    Thank you
    Anil

    Dear Anil,
    AS06                 Delete Asset Record/Mark for Delet.
    AS26                 Mark group asset for deletion     
    Hope this will help.
    Regards,
    Naveen.

  • Router is not Clearing old Crypto Sessions

    I am facing a stange problem on my router and its not clearing old state crypto sessions.
    IPv4 Crypto ISAKMP SA
    dst             src             state          conn-id slot status
    205.203.130.7   10.33.40.249    QM_IDLE           1025    0 ACTIVE
    205.203.130.7   10.33.40.249    QM_IDLE           1021    0 ACTIVE
    205.203.130.7   10.33.40.249    QM_IDLE           1017    0 ACTIVE
    205.203.130.7   10.33.40.249    QM_IDLE           1013    0 ACTIVE
    205.203.130.7   10.33.40.249    QM_IDLE           1009    0 ACTIVE
    205.203.130.7   10.33.40.249    QM_IDLE           1005    0 ACTIVE
    205.203.130.7   10.33.40.249    QM_IDLE           1001    0 ACTIVE
    10.126.94.19    10.124.94.19    QM_IDLE           1079    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1027    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1023    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1019    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1015    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1011    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1007    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1003    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1099    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1097    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1095    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1093    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1091    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1089    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1087    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1085    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1083    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1081    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1078    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1076    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1074    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1072    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1070    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1068    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1066    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1064    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1062    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1060    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1058    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1056    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1054    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1052    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1050    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1048    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1046    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1044    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1042    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1040    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1038    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1036    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1034    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1032    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1030    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1028    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1026    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1024    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1022    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1020    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1018    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1016    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1014    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1012    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1010    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1008    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1006    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1004    0 ACTIVE
    205.203.153.195 10.33.40.249    QM_IDLE           1002    0 ACTIVE

    There has not been a problem like this for a while.
    If you're running on older IOS version please upgrade to a MD release suitable for your router.
    If you're already running something recent on this router - feel free to open a TAC case and have us investigate this thoroughly.

Maybe you are looking for

  • Replication sales order from CRM to R/3?

    Hi Gurus I need some advice. We are implementing CRM for a over client Over sale Cycle is LeadOpportunity- sales order- delivery  billing Once sales order created in CRM we have to send that sales order to SAP R/3 Then delivery and Billing will d

  • Apps taking up too much space on my computer harddrive?

    Hi guys, Whenever I hook my iPad & iPhone up to iTunes it automatically starts to upload all of the apps from both devices onto my computer. This wouldn't be such a problem, but between the iPhone and the iPad, it takes up around 40 GB of space from

  • Flickr and PSE 13

    Using PSE 13 (Elements 13) When I try to share a photo with Flickr it take a long time prepairing the photo and then says "There was a problem with your Internet connection. Please check that a firewall is not blocking Adobe Photoshop Elements from a

  • RMI and EventListeners

    i am creating the desktop sharing gadget via rmi,, every thing is fine apart from it does not respond to key events..i don't understand where i am lacking.. here's server code. public class ServerInterface extends UnicastRemoteObject implements Syste

  • HT201364 why since the last two updates of mavericks my macbook pro is very slower?

    i own a 13 inch macbook pro with intel core i5 and 4 gbram 500ghardisk since the last two updates of mavericks my macbook is running with lag im not able to watch videos because they frozze constantly and the same when using design software or watchi