Clear Old Critical Alerts in GC
Hi,
Wondering if someone can offer a solution.
I've got some old critical alerts in a newly created OMS and repository that have been addressed and fixed that will not clear. I've tried the "clearstate" on the agent with no luck. I've got a SR open and am being told i need to change the template value and reapply - this is a ridiculous solution since I'll end up needing to do this regularly (i've been running gc since the beta release and have seen this issue ongoing in each release).
Any solutions out there to remove these old alerts?
Alex
For our environment we create groups and templates. We assign these monitoring templates to the groups.
I ended up changing the value of the monitoring criteria on the specific target that was having a problem and the alert cleared. Then changed it back. Some of the targets I had to actually remove and re-add the target as you stated.
My SR says this will be fixed in 11g...
Similar Messages
-
Cannot Clear Critical Alert for Physical Standby Databases
10.2.0.4.0 Grid Control monitoring 10.2.0.4.0 databases and standby databases with 10.2.0.4.0 agents.
The standby databases are running on Xen guests. The O/S is Red Hat 4 Advanced Server.
I had a failure of Xen guest on Saturday that caused me to have to rebuild the standby servers. EM Grid Control successfully verifies the configurations and the status is normal for both physical standby databases. (A rebuilt logical standby database shows no alerts.)
Grid Control database targets page shows a single critical alert for each physical standby database. The alert is for "number of missing media files is 4". The metric graph shows the count as 0 since before the rebuilds. I cannot clear the alerts from the Critical Alerts page. Grid Control reports "The selected alert(s) cannot be manually cleared. They will clear automatically once the metric is no longer in a critical or warning state.".
Any suggestions?
Thanks,
Ray WestphalThanks for the reply Anthony.
The result of the query on both standby databases is '0'. The metric graph also shows the value at '0' since before rebuilds.
And the OMS db and agents have been reset several times since I posted this.
Ray Westphal. -
Oem grid is generating alerts . Even long after the problem is resolved the alerts are not cleared . These alerts are for space on filesystem / archiv destiantion full .
we are using gird 10.2.0.3.0 version .
Any help would be appericated
Thanks
NarendraThese alerts should clear after you have resolved the space issue so the space left is within your set thresholds.
If you are sure this is the case, stop the agent, issue a clearstate command and restart the agent.
does the alert clear then?
Also, what version of agents are you using? -
Cannot clear an acknowledged alert
Hello
I have a critical alert which I acknowledged. Now I cannot select this alert to clear it in the Alerts --> Critical page, the selection checkbox is greyed out. The Alert History in the Targets page is clean, the critical alert is not listed.
Thanks for your help
Pierrotyou must execute in the target host :
emctl clearstate agent
If not change the alert , you will need the help of ORACLE SUPPORT to provide you a special PL/SQL procedure to clean the alert
this procedure delete the rows of all MGMT_TABLES when the alert is refer
regards -
Time Macine not backing up.
As the harddrive is full, Can the time machine clear old backups, and override them with new backups. For example 5 - 6 days +++ old. Backups were proformed dayly
Any help much appreciated
Many thanks,If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
GRIR Clearing (old items)
Dear all,
could someone make a suggestion on how to clear open items on the GRIR account that are over 6 months old. MR11 is run on a monthly basis, yet I have some open items in my reconciliation dating back until 2003. I would like to get rid of them but are not able to make manual postings on the GRIR account.
Sincerely,
LucasHi,
It is not recommended to post manually on GR IR account.
You should try to clear this difference with MR11, it is possible to clear old items with the current date.
Rgrds,
Miroslav -
Clearing old emails addresses on iPhone
Is there any method to clear old or incorrect email addresses to prevent them from popping up in auto fill?
Thank you but that isn't what I meant. When I write an email on my iphone, several email address for the same person will pop up while I know only one is still good. It's no longer in my address book but continues to show up. After more investigating, I found out that prior to version 7, there isn't any way to delete old email addresses unless you reset the phone. With version 7, there is a button next to any email addresses that may pop up that are no longer relavent. If you click on the button, an option is to delete it. You can also create a contact using it if wanted. So, I appreciate your help. Maybe my research helped you out!
-
Can SAP/CCMS automatically clear the RZ20 alerts after 30 days?
Can SAP/CCMS automatically clear the RZ20 alerts after 30 days?
And if so, how?Hi William,
You can reorganize the completed alerts using the analysis method for AlertsInDB. The method deletes older alerts that match your specifications and reduced the space occupied in the database. To do this, proceed as follows:
1. Choose CCMS ® Control/Monitoring ® Alert Monitor, or call transaction RZ20.
2. Expand the SAP CCMS Technical Expert Monitors monitor set, place the cursor on the CCMS Selfmonitoring monitor, and choose Start Monitor.
3. Expand the alert monitoring tree. You will find the monitoring object for which you are looking under CCMS_Selfmonitoring ® Runtime ® AlertsInDB. Select the object and choose Start Analysis Method.
4. Specify the date and time from which completed alerts are to be deleted.
Regards,
suraj -
Dear All
I receive critical alert from my C350 and i am not sure what this mean.
The Critical message is:
An application fault occurred: ('Lib/re.py _compile|233', "<class>", 'nothing to repeat', '[util/Aquarium.py screenLoop|407] [util/InternalLibrary.py inverseExtend|328] [util/InternalLibrary.py __call__|769] [layout/Bare.py __call__|579] [util/InternalLibrary.py __call__|771] [monitor/message_tracking_results.py __call__|444] [monitor/message_tracking_results.py _perform_highlight|710] [Lib/re.py compile|180] [Lib/re.py _compile|233]')
can anyone tell me what this is?Sir, This is a known issue. Bug #40903. It would be a good thing to send an email to [email protected], restate the application fault, this Bug number and your company information and serial number of your IronPort. The support person will add you to the bug sighting.
The Critical message is:
An application fault occurred: ('Lib/re.py _compile|233', "", 'nothing to repeat', '[util/Aquarium.py screenLoop|407] [util/InternalLibrary.py inverseExtend|328] [util/InternalLibrary.py __call__|769] [layout/Bare.py __call__|579] [util/InternalLibrary.py __call__|771] [monitor/message_tracking_results.py __call__|444] [monitor/message_tracking_results.py _perform_highlight|710] [Lib/re.py compile|180] [Lib/re.py _compile|233]')
can anyone tell me what this is? -
Can someone please tell me how to retrieve deleted text. i was clearing old texts when a new one came through at the same time and was deleted also. My last update was iOS 8.1.2
You restore from a backup that was created after the text was received but before it was deleted.
But if you literally deleted it right after it came in, then it's not recoverable. Have the other person resend the text. -
Critical Alerts/Maintenance Notifications
Hi,
I am the primary contact for a POD and my user profile has the "Always Send Critical Alerts" checked as well.
However, I am still unable to receive any communication mails from Oracle for any planned maintenance/updates.
As an alternative, I need to check training and support OR the version information link for any planned activities.
Any idea on how to get notifications working.
Regards,
Sumeet K.This only happens a couple of times a year so i wouldnt expect you would notice this anyway. You should raise a SR with Oracle to be included on a email distribution lists that sends out information specific to your pod. He is a sample comminication i recieved from [email protected]
This is a email notification regarding the following escalation being performed by Oracle CRM On Demand Support.
Escalation Information
=================
Escalation Reference Number: 3-4378769892
Escalated On: 8/28/2011 5:10:21 AM (GMT -07:00) MT
ETR: 3 SEPTEMBER 2011 6:00 AM MT
Status: Planned Action
Environment Type: Production
Event Type: Planned Maintenance
Service Area: Service Availability
Title: CRM On Demand - Planned Maintenance
Description:
On Friday, 2 September, 2011 at 10:00 PM US Mountain,the CRM On Demand production environment will be unavailable for planned maintenance.
This maintenance should last approximately 8 hours. During this time, users will be unable to access CRM On Demand. -
Router is not Clearing old Crypto Sessions
I am facing a stange problem on my router and its not clearing old state crypto sessions.
IPv4 Crypto ISAKMP SA
dst src state conn-id slot status
205.203.130.7 10.33.40.249 QM_IDLE 1025 0 ACTIVE
205.203.130.7 10.33.40.249 QM_IDLE 1021 0 ACTIVE
205.203.130.7 10.33.40.249 QM_IDLE 1017 0 ACTIVE
205.203.130.7 10.33.40.249 QM_IDLE 1013 0 ACTIVE
205.203.130.7 10.33.40.249 QM_IDLE 1009 0 ACTIVE
205.203.130.7 10.33.40.249 QM_IDLE 1005 0 ACTIVE
205.203.130.7 10.33.40.249 QM_IDLE 1001 0 ACTIVE
10.126.94.19 10.124.94.19 QM_IDLE 1079 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1027 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1023 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1019 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1015 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1011 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1007 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1003 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1099 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1097 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1095 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1093 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1091 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1089 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1087 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1085 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1083 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1081 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1078 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1076 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1074 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1072 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1070 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1068 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1066 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1064 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1062 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1060 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1058 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1056 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1054 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1052 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1050 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1048 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1046 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1044 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1042 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1040 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1038 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1036 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1034 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1032 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1030 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1028 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1026 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1024 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1022 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1020 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1018 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1016 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1014 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1012 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1010 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1008 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1006 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1004 0 ACTIVE
205.203.153.195 10.33.40.249 QM_IDLE 1002 0 ACTIVEThere has not been a problem like this for a while.
If you're running on older IOS version please upgrade to a MD release suitable for your router.
If you're already running something recent on this router - feel free to open a TAC case and have us investigate this thoroughly. -
How to setup EM Critical Alerts to be send to Pager and Warnings to Email?
1. How do you setup Critical Alerts to be send to Pager and Warnings to Email?
Please provide step by step it would help.
Thanks
GeorgeWhich documentation would you reccomend? I've only found this:
http://download-east.oracle.com/docs/cd/B19306_01/em.102/b25986/toc.htm
It looks more like techical documentation than user documentation. I don't find many "how to"s in that particular doc.
This one is OK, but not detailed enough
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b25159/monitor.htm
It also doesn't identify which functions are free and which ones are licensable costing $$. -
I need to clear old iPhone, I went to the reset option in setting. It it's asking for a password... I don't recall setting a password up and help for this? Thanks
Are you sure it doesn't have iOS 7 installed? It sounds like Activation Lock is on and if that is the case, when you do Settings > General > Reset > Erase all Content & Settings, you need to enter the password for the Apple ID.
-
Im running out of space, how do I clear old content temp files
Im running out of space, how do I clear old content temp files old apps?
i have done the browser cache and cleared history.I am clearing items off the macbook pro but is there other areas i should clean
ThanksIm running out of space, how do I clear old content temp files old apps?
I'm not sure exactly what you're asking. Temp files get automatically deleted when you restart. Old apps you can either uninstall (if it was originally installed with an installer, there should be an uninstaller somewhere) or drag it to the trash. What's "old content"?
i have done the browser cache and cleared history.
This is not going to give you back much space.
Maybe you are looking for
-
What's the best way of storing (configurable) application settings.
I'm developing an application that has a few dozen settings, which have a default value at installation time, however they may be changed at execution time. The settings will not be set by the application directly itself, instead it provides an API w
-
Character # is converted to carriage return in proxy call. Please help!
Hi Experts, I have a variable of type string with value: #VSSOO01. In my ABAP code I am sending this value to XI via Proxy. When I check the value that XI has received, it shows as Carriage Return and VSSOO01. In other words # is replaced by carri
-
Exported quicktime presentations not running properly on Windows
I've done a presentation that has been sent out to clients who have come back with vague comments saying that part of the presentation is not visible in full screen mode? After much searching around the office I've finally found a PC that seems to be
-
Calling application's URL from Notes Portlet
Hello, We have been able to successfully configure Lotus Notes- External Application Portlet using JPDK. Now, we are creating a link on this Notes portlet that will take the user to the corresponding external application. For this, we have called a s
-
License information for oracle and HTMLDB
Anybody knows which metalink document or where I can found information about getting license for Oracle Database 10g , oracle10gAS Forms&Report server and HTMLDB 2.0 to deploye on the web..?