Clear older open items which is posted

Hi
We are trying to clear GR/IR open items, but the issue is GL Account earlier was not open item, and later it changed to open item. now the problem is earlier items which were posted is not getting clear as they are not showing as a red or open items, Can someone help me to how to clear this older items now?
Many thanks in advance.
Natashaa

Dear Natashaa,
Its surprising that you were able to modify an exisitng account from non-open item managed to Open Item Managed with balance it.
Please see below standard SAP Message which you should have received. while changing Open Item Management Tick in existing G/L Account.
Could you please answer how you were able to modify the G/L Account with Open Item when there was a balance in it.
You cannot change the open item management setting; (see long text)
    Message no. FH087
Diagnosis
    This account does not have a balance of zero.
System Response
    You cannot switch the open item management specification on or off with
    this transaction.
Procedure
    If you want to switch this function on retroactively for a certain
    account, you should create a new account with the correct setting and
    use this to make a transfer posting of existing items.
    If you want to switch off the open item management function
    retroactively for an account, you must first clear all the postings
    currently on this account. You cannot make any changes to the account
    management method until this is done.

Similar Messages

  • Possible to clear vendor open item against already posted payment document?

    Hi
    Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
    An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
    Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
    This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
    Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
    Thank for your help.
    Mike

    Hi,
    I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
    Then chose menu option Clearing -> Reset Cleared Items.
    The system pops up a window asking for a reversal reason and reversal date.  I use 01 and posting date of today.
    The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
    When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
    Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
    Thanks for your help again.

  • Payment run  - should not clear the open item but should post payment doc

    Hi Gurus,
    Can you please help me , on how to acheive like when payment run F110 post the payment doc it should not close the open item rather keep that open item as open item , but hsould be be paid by payment doc posted through payment run F110.
    Have any one of you had similar requirement ..? FICO gurus help me to acheiev this .. any exit /BADI ..or ideas..
    Appreciate your help in advance

    HI ,
    Thanks for your reply , but still I am not clear on that.
    reason they want to keep this open to be kept as open item , so that item will be picked up by dunning run ..
    Basically  the open invoice is being cleared by payment doc which was generated by payment run. If we look at BSEG in the open item record BSEG-AUGBL = will have the clearing doc number , and in addition to that BSEG will have created another record for the clearing doc as well .
    May be since open invoice record is being updated with clearing doc (AUGBL ) , I belive its not shown up as open item .
    Somehow this item should be kept as open item ... that is the req and also paid item payment reference should be transfered to Bill of exchange as well.
    Hope you have clear background of my req...
    Tnanks in advance ,

  • F-04 - Post with clearing : Process open items

    Hi everyone,
    I encountered issues in T-code : F-04 - Post with clearing : Process open items.
    The document header text data is not display in F-04. It is blank.
    However, when i check in FBL3N the document header text data was there.
    Pls assist on how to make the document header text data display in f-04?
    Which configuration or any other way to do that?
    Thanks.
    Best Regards,
    Joo

    Hi,
    The words of "Document Header Text" was there.
    The data/informations for the Document header text is not there.
    Pls advice.
    Thanks.
    Regards,
    Joo

  • Document is getting posted but unalble to clear the open items

    hi gurus,
    i m using the inbound idoc ACC_DOCUMENT03 to post the receipt against invoice. uptill now i can post the receipt but it shows the items are still in the open items. i need to clear the open items for the invoice. how to solve it .

    Hi,
    In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
    and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
    Hope this will resolve
    Assign points if useful
    Thanks
    Aravind
    Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

  • EBS posting to clear customer open items - Function not working?

    Hello SAPers
    I have an issue I just canu2019t seem to resolve! We are receiving MT940 statements and receive customer invoice reference details with field: 86 as follows:
    :61:090910C1500,00FOSB1000270 //100909050      0        035315
    :86:DEPOSIT
    Remitter:1000270 MISSION AUSTRALIA   Ref:1200000017
    Immediately following the BTC FOSB the bank quotes the customer number however I am not using this as standard SAP should identify the customer by document number within the note to payee field?
    I am using a 2 step process in posting to the clearing account and customer. Config as follows:
    Pst Type 1
    40     Bank
    50     Clearing
    Pst type 2
    40     Clearing
    15     BLANK          DZ     3      15
    I have also set up a string to look for the documents ^(12########)$. When we load the statement the first posting is successful however the second does not post to the customer or clear based on the invoice reference. I am using algorithm 020. The error that occurs is F5 102 Customer does not exist in company code xxxx. It actually does exist in the company code.
    I have loaded the EBS to the buffer and simulated the search on BELNR and it picks up the document?
    I am sure this is standard and a CMOD is not required on this type of functionality? What have I not done to allow posting to the customer based on document number or to post on account where it is not cleared?
    Any assistance on this issue is appreciated? Thanks in advance.

    Function Module for GL open Items
    how to clear customer open items by another  customer open item
    Function Module for GL Open Items
    Reward points..

  • F-30 Post clearing with Open Items

    Hi to all.
    i have created a function module that will ask for external invoice # upon pressing the SAVE button in VF01 and will populate the custom table i have created also with System Invoice # and the External Invoice entered by the user. i was able to link my custom table to FBL5N displaying the External Invoice  based on the System invoice in FBL5N.
    now i need to add a custom fields  to the Account Item table display in F-30 Post clearing with Open Items displaying the external Invoice from my custom table .
    thanx in advance....

    Solved it myself.
    for those who will have requirements like mine.
    these are the steps i did.
    -append structure in both RFOPS and RFOPS_S
    -create a BTE using bte 0000900 events
    -from zfunction modules of bte 00009000 i link my custom table base on the work area of rfops then insert the value for my custom fields.

  • Validation not working when clearing an open item

    Hi SAP Gurus,
    We have a interesting scenario to discuss with you. We are using Legal Dunning Procedure so once legal action is intiated against the customer notifications are sent to the legal department if payments are received.
    Unfortunately this can happen only during the next dunning run which of course can occur in varying time intrevals. Therefore we need a validation to occur if a payment is received from a customer against whom legal action has been initiated.
    We tried using the following fields Date of the legal dunning proceedings, Dunning block, Dunning key, Dunning level but are not able to get the validation to work when attempting to clear the open item. These all work when trying to post a new document but fail when trying to clear a open item. Points will be given for helpful answers.
    Regards,
    Siva

    this is the radio button
    <af:selectOneRadio value="#{bindings.Gender1.inputValue}"
                                                     label="#{bindings.Gender1.label}"
                                                     required="#{bindings.Gender1.hints.mandatory}"
                                                     shortDesc="#{bindings.Gender1.hints.tooltip}"
                                                     id="sor5">
                <f:selectItems value="#{bindings.Gender1.items}" id="si7"/>
              </af:selectOneRadio>
    i use this sample
    http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/ADF_Insider_Essential_YesNoRadio/ADF_Insider_Essential_YesNoRadio.html

  • Unable to clear vendor open item.

    Hi experts,
    Have posted vendor document  under document type KZ directly, there is no open item invoice to clear the document.
    posted entry as below. now we are unable to clear the open item document through F-44. we did not find open item for the posted document which is posted in document type KZ.
    Vendor account entry
    25 vendor account 10000
    38 vendor account  8000
    50 bank account     2000
    document has been cleared only 8000 not 2000.  Please advice me how  to clear the KZ document.
    Regards,
    Anji Reddy.

    HI Anji Reddy,
    There is some Process to do Clearing function
    first of all Open item should be there in Vendor account with the Invoice.
    For that invoice there should be a payment which is full payment or else Partial Pament.
    Then you can do clearing function to clear the Open items.
    Through F-51 you can do both Payment and clearing which is Post with clearing
    if you have done payment throgh any other Tcodes you have to come F-44 and do mannual Clearing.
    Try to explain your senario more Clear so that your doubt can solve
    Regards
    Mahesh

  • Clearing of Open items - Critera - Auotomatic Payment Run

    Dear Friends,
    We have configured the Automatic Payment Run in the system and are in the process of maintaining the integration with the Bank. When we import the Electronic Bank Statement, we find that instaed of 'Value Date' some otehr reference gets populated in the assignment field in the line item for Bank Clearing Account, thus rendering it difficult to perform automatic clearing of open items. The first question is how to check what information is getting populated and why? Is there a way to find it out ?
    Another thing is that we have been advised to maintain the substitution rule so that instead of some other reference, the Value Date gets substituted in the Assignment Field? Need the help of experts in finding out which information gets populated in the Assignment Field and second what is the method and config maintainence required for defining the Substitution Rule so that the Value Date gets captuerd in the Assignment Feild and which would help in perfroming the automatic clearing of open items.
    Thanks in advance!
    Regards,

    Hi,
    Thanks for the prompt response. In FF.5 while importing the Bank Statement, the box for "Assign Value Date" was checked and in the GL Master of the Bank Clearing Account, the Sort Key has also been defined as 027 (Value Date). Even then in the line item posting for Bank Clearing Account, the reference from Document Header Text (Field Name BKTXT) gets populated in the Assignment Feild. Now the issue is that this field needs to be substituted with the value date. How to define the Substitution Rule? Another issue is what should be the second criteria defined in the system for clearing the Open Items in the Bank Clearing Account, since for the same value date there could be two identical items and only one may be cleared from the bank and other one may be outstanding?
    Help from experts who have configured e banking would be highly appreciated.
    Thanks!
    Regards

  • Bank Clearing Account - Open Item Clearing

    Dear Friends,
    We have maintained the configuration for importing the electronic bank statement and we have tested and found that the entries are getting posted in the Bank Clearing Account. However, we have encountered a major issue, when we perform the automatic payment run, the value date gets updated in the Assignment Feild, whereas the users want this to be updated with the combination of "Document No. + Value Date".
    Secondly, when we import the bank statement, in the multicash format, the posted entries in the Bank Clearing Account have the "Document Header Text" field updated in the Assignment Field coloumn, thus making it difficult to do automatic clearing of open items. In these entries also it is desired that the combination of Document No. relating to the item paid thru payment run plus the Value Date should get update so that the open items in debit and credit can be matched and cleared off automatically.
    Your help would be highly appreciated in achiveing these objectives.
    Regards

    Thanks Murali. Another help needed is how can we change the values in Assignment Feild, which is now getting picked up from the Document Header Text? We need the original Docuemnt No. + Value Date to get populated in the Assignemnt Field in the entries posted while importing the electronic bank statement.
    Would appreciate your help.
    Regards

  • Clearing of open items from one Bank Account to one or several customer A/C

    The requirement herein is to do the Posting & clearing of open items from one Bank Account to one or several customer Accounts. We will have to use the Standard program RFBIBL00 to achieve this because the program can do the posting and clearing of open items. I know that we will have to use the structures BSELK (Header) & BSELP (item) to get the clearing functionality as well. Now the question is to which field we will map the Bank A/C No. and the Customer Clearing A/C. I need help on mapping the data to correct structure fields. I thought about it and I think the data should be arranged like the following:
    BGR00- Session Header
    BBKPF- Header
    BBSEG- Doc. data (Bank Account BBSEG-BANKN )----Can you confirm ??
    BSELK-AGKON (Customer A/C- open item/ Header )
    BSELP - Line Item
    BSELK-AGKON (Customer A/C- open item/ Header )
    BSELP - Line Item
    BSELK-AGKON (Customer A/C- open item/ Header )
    BSELP - Line Item
    I know that the clearing can happen from one Bank A/C to several customer accounts. I am thinking on building up data in this format & then writing it to a file to sumbit the file data to RFBIBL00. Can anybody help me in building up the data. Kindly provide your helpful insights. I want to be sure if this is correct or not ?? One more question how to fill the BSELP structure ??

    Solved Through forum

  • FPBW: Extract Open Items with a posting date in the future

    Dear all,
    I'm are currently searching for possibilities to extract Open Items with a posting date in the future from SAP IS-U 4.72 into SAP BW 3.5.
    Currently I'm using the Business Content extractor 0FC_OP_01 together with the mass transaction FPBW in IS-U.
    The problem I'm facing is within the mass transaction FPBW. I've have set the key date at 01.11.2007, but this job already runs for 52.000 seconds on the same database select-statement.
    Does anybody know a possible solution to improve the performance of the statement below? (I pasted it from the process overview)
    ================================
    SELECT
    /*+
      INDEX("DFKKOP" "DFKKOP~1" "DFKKOP^1" "DFKKOP____1" "DFKKOP____1__X" "DFKKOP_1")
      "BETRH" , "BETRW" , "BUDAT" , "BUKRS" , "FAEDN" , "GPART" , "GSBER" , "INKPS" , "SPART" , "VKONT" ,
      "WAERS" , "MAHNV" , "ABWBL" , "APPLK" , "AUGBD" , "AUGBL" , "AUGBT" , "AUGDT" , "AUGRD" , "AUGST" ,
      "AUGWA" , "BLART" , "BLDAT" , "EMGPA" , "GRKEY" , "HVORG" , "MANSP" , "MWSKZ" , "OPBEL" , "OPSTA" ,
      "OPUPK" , "PERSL" , "PYMET" , "QSSHB" , "SBETW" , "SPZAH" , "STUDT" , "TVORG" , "VTREF" , "XBLNR" ,
      "XMANL" , "HKONT" , "OPUPZ" , "OPUPW" , "STAKZ" , "WHGRP" , "AUGBS" , "XANZA" , "XRAGL" , "ABWTP" ,
      "ASTKZ"
    FROM
      "DFKKOP"
    WHERE
      "MANDT" = :A0 AND "AUGST" = :A1 AND "GPART" BETWEEN :A2 AND :A3 AND ( "AUGDT" = :A4 OR "AUGDT" > :A5
      AND ( "BUDAT" <= :A6 OR "AUGBD" <= :A7 ) OR "WHGRP" <> :A8 AND "OPUPW" = :A9 )
    ORDER BY
      "AUGST" , "GPART"#
    =================================
    I have already tried to create an index on the following fields (in the same order):
    - MANDT           Client
    - AUGST           Clearing status
    - GPART           Business Partner Number
    - AUGDT           Clearing date
    - BUDAT           Posting Date in the Document
    Any help would be appreciated!
    Thanks in advance,
    Steven Groot

    Hi Marcos,
    When you have created the Restricted keyfigures for Open Items, You have to add the date characteristic on which you are looking open item and add the variable there.Here you have to use a variable of type Interval and select the operator "<" the date of the Variable.If you go through, there are standard variable for keydate, which you can use directly.
    Hope you got the idea
    Regards
    Happy Tony

  • Clearing customer open items

    Hello!
    Can anybody help to find a way how to clear customer open items when there is no reference number in use for customer. In electronic bank statemen there is only billing document number in TXT field. How to configure "Make Global Settings for Electronic Bank Statement" and "Define Search String for Electronic Bank Statement" for that purpose.
    With all the best,
    Merlin

    Hello,
    IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
    Give your chart of Accounts
    1. Create your account symbols
    Create freely definable account symbols. Make sure that you are able to identify them when you are configuring in future steps.
    2. Assigning Accounts to Account Symbols
    Here you need to assign the account symbols to GL Accounts or you need to use masking logic. You must have designed your accounts in such a way that the end digits will work for posting the entries to FI. Account Modifier you use as + and use your local currency, if you do not have any foreign currency postings.
    3. Create Posting Rules
    Create freely definable posting rules.
    4. Define Posting Rules (This is the most important configuration for your FI Postings / Clearings)
    a) For all the payments you need to create the entries for posting area 1
    b) For all the receipt you need to create the entries for posting area 1 and 2
    c) Use the document type DZ in case if you want to clear the items. Use Posting type 8. If the invoice number is there in the reference field of bank statement, automatically the same will be selected by the system and cleared.
    d) If you want just only entries to be posted use posting type 1.
    e) If you want to clear the check, then use the posting type 4.
    f) Configure according to the entries to be posted.
    g) If you are going for clearing something the offsetting debit / offsetting credit (as the case may be) need not be given.
    5. Create Transaction Type
    Create freely definable Transaction Type
    Select the transaction type and assign the external transactions to your posting rules.
    For outgoing check use 13 as Interpretation Algorithm and 1 as the processing type.
    Remaining all case use 1 (Standard algorithm) and 5 as the processing type.
    Please also go through the below mentioned note in case if you are required to use further available interpretation algorithms or processing types.
    6. Assign Bank Accounts to Transaction Types:
    You need enter the Bank Key / Bank Account / Transaction type here.
    You can get the the bank key and bank account details from table T012K (Go to SE16)
    Further supplementary notes may be useful to you:
    There are different programs to upload electronic bank statement.
    FF.5 or FF_5.
    I think your case Multicash format you are using.
    You need have three files in FF.5 and two files in FF_5
    You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server.
    1. Take all the external codes list from bank.
    2. Take any available documentation from the Bank describing the relevance of the external codes.
    3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements.
    4. Based on this decide the Account Symbols that are required to be created.
    5. Make sure that the masking rules are configured properly.
    6. Decide the posting rules that needs to be created.
    7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic.
    6. Concentrate on the posting areas to be posted while uploading the bank statement.
    Further explanation would help you to understand the functionality when uploaded the electronic bank statement.
    Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync.
    You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP.
    SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be:
    Vendor Account Dr
    To Bank Sub Account
    The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is:
    Bank Sub Account Dr
    To Bank Main Account
    It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts.
    At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting
    The entries would system itself pass is:
    Bank Main Account Dr
    To Bank Sub Account
    Bank Sub Account Dr
    To Cutomer account.
    Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts.
    Ideally you will use
    FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement
    FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing.
    GO THROUGH SAP NOTE 48854
    Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms.
    Though this note is in relevant to GB specific, you will find this very useful.
    description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point.
    The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case.
    1. '00': There is no processing. The entry line is ignored.
    2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm.
    3. '02': Transfer of the ending balance to the electronic bank statement
    4. '03': Transfer of the opening balance to the electronic bank statement
    5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm.
    6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'.
    Note
    To differentiate between the two procedures in table T028G, you have to maintain two separate entries.
    Example: the bank uses bank code '62' for cash receipts and for BACS bank collection.
    Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5
    62 SAPBACS + GB63 000 5
    7. '06': Bank costs or interest revenues
    Recommended interpretation algorithm: '000 - No interpretation'
    8. '07': Total amount of cash disbursements
    9. '08': Total amount of cash receipts
    10. '09': Items not paid
    Recommended interpretation algorithm: '000 - No interpretation'
    Regards,
    Ravi

  • Foreign Currency Valuation - GL at the time of clearing of open items

    Hi experts,
    We valuate the open items (Balance sheet items) in Company Code Currency without checking the reversal option.
    At the time of clearing of these open items, the GL used for reversal of the valuation difference is been different.
    GL mapped in OBA1:
    Exch.rate diff realized
    Loss/Gain: 716000
    Valuation: Loss/Gain - 716001
    Bal.Adj 1: 101699
    Translation:
    Loss/Gain: 716000
    Bal.sheet adj -Loss/Gain: 716001
    At the time of clearing of open items:
    The entry which is getting passed for the reversal of the valuation difference is some time posted to GL: 101699 and sometime to GL 716000. The off-setting GL been Clearing GL(which is been valuated).
    Could someone kindly through some light as to why the system behaving in such a way. We expect the GL at the time of reversal to be 101699.
    Thanks in advance.

    Hi Pradeep,
    The principle of foreign currency revaluation works as follows for the open items like AR, AP and Bank Balances:
    At the period end the system revaluates the open items (or balances, as the case may be) with the period end exchange rate and thus posts the difference between the original exchange rate (at the time the open item was created) and the period end rate. This could be loss or gain due to revaluation. One side of the entry is P&L (7...account) and the other side is the balance sheet (the balance sheet account typically comes from AR, AP or Bank/Cash range).
    This loss or gain is not realized since at the period end the open item is still out there. When you clear the open item, the loss or gain due to the latest exchange rate is realized immediately and is posted to realized loss or gain, with an offset to the original balance sheet account.
    I hope the above helps.
    Sharabh

Maybe you are looking for