Clear search results from Content Services Windows Crawl 6.1

We have ALI Content Services Windows Files 6.1 with a crawl job on a network location. It works fine. Now we have changed the location - directory structure. The job, modified with the new location works fine, however, we still see search results from the old location also. Since those documents no longer exist, clicking on the link causes an error. How do we clear the search results?
Thanks.

Have you tried running Search Repair. I believe this should clear out the orphaned search records.

Similar Messages

ADFS SSO and SharePoint 2013 on-premise Hybrid outbound search results from SharePoint Online - does it work?

Hi,
I want to setup an outpund hybrid search for SharePoint 2013 on-premise to SharePoint Online.
But I'm not shure if this works with ADFS SSO.
Has somebody experience with this setup?
Here's my guide which I'm going to use for this installation:
Introduction
In this post I'll show you how to get search results from your SharePoint Online in your SharePoint 2013 on-premise search center.
Requirements
User synchronisation ActiveDirectory to Office 365 with DirSync
DirSync password sync or ADFS SSO
SharePoint Online
SharePoint 2013 on-premise
Enterprise Search service
SharePoint Online Management Shell
Instructions
All configuration will be done either in the Search Administration of the Central Administration or in the PowerShell console of your on-premise SharePoint 2013 server.
Set up Sever to Server Trust
Export certificates
To create a server to server trust we need two certificates.
[certificate name].pfx: In order to replace the STS certificate, the certificate is needed in Personal Information Exchange (PFX) format including the private key.
[certificate name].cer: In order to set up a trust with Office 365 and Windows Azure ACS, the certificate is needed in CER Base64 format.
First launch the Internet Information Services (IIS) Manager
Select your SharePoint web server and double-click Server Certificates
In the Actions pane, click Create Self-Signed Certificate
Enter a name for the certificate and save it with OK
To export the new certificate in the Pfx format select it and click Export in the Actions pane
Fill the fields and click OK Export to: C:\[certificate
name].pfx Password: [password]
Also we need to export the certificate in the CER Base64 format. For that purpose make a right-click on the certificate select it and click on View...
Click the Details tab and then click Copy to File
On the Welcome to the Certificate Export Wizard page, click Next
On the Export Private Key page, click Next
On the Export File Format page, click Base-64 encoded X.509 (.CER), and then click Next.
As file name enter C:\[certificate
name].cer and then click Next
Finish the export
Import the new STS (SharePoint Token Service) certificate
Let's update the certificate on the STS. Configure and run the PowerShell script below on your SharePoint server.
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# import it
Set-SPSecurityTokenServiceConfig -ImportSigningCertificate $PfxCert
Type Yes when prompted with the following message.
You are about to change the signing certificate for the Security Token Service. Changing the certificate to an invalid, inaccessible or non-existent certificate will cause your SharePoint installation to stop functioning. Refer
to the following article for instructions on how to change this certificate: http://go.microsoft.com/fwlink/?LinkID=178475. Are you
sure, you want to continue?
Restart IIS so STS picks up the new certificate.
& iisreset
& net stop SPTimerV4
& net start SPTimerV4
Now validate the certificate replacement by running several PowerShell commands and compare their outputs.
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
# get the encrypted pfx certificate object
New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# compare the output above with this output
(Get-SPSecurityTokenServiceConfig).LocalLoginProvider.SigningCertificate
[/code]
## Establish the server to server trust
[code lang="ps"]
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
Import-Module MSOnline
Import-Module MSOnlineExtended
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# set the onpremise domain that you added to Office 365
$SPCN = "sharepoint.domain.com"
# your onpremise SharePoint site url
$SPSite="http://sharepoint"
# don't change this value
$SPOAppID="00000003-0000-0ff1-ce00-000000000000"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# get the raw data
$PfxCertBin = $PfxCert.GetRawCertData()
# create a new certificate object
$X64Cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
# import the base 64 encoded certificate
$X64Cert.Import($X64CertPath)
# get the raw data
$X64CertBin = $X64Cert.GetRawCertData()
# save base 64 string in variable
$CredValue = [System.Convert]::ToBase64String($X64CertBin)
# connect to office 3656
Connect-MsolService
# register the on-premise STS as service principal in Office 365
# add a new service principal
New-MsolServicePrincipalCredential -AppPrincipalId $SPOAppID -Type asymmetric -Usage Verify -Value $CredValue
$MsolServicePrincipal = Get-MsolServicePrincipal -AppPrincipalId $SPOAppID
$SPServicePrincipalNames = $MsolServicePrincipal.ServicePrincipalNames
$SPServicePrincipalNames.Add("$SPOAppID/$SPCN")
Set-MsolServicePrincipal -AppPrincipalId $SPOAppID -ServicePrincipalNames $SPServicePrincipalNames
# get the online name identifier
$MsolCompanyInformationID = (Get-MsolCompanyInformation).ObjectID
$MsolServicePrincipalID = (Get-MsolServicePrincipal -ServicePrincipalName $SPOAppID).ObjectID
$MsolNameIdentifier = "$MsolServicePrincipalID@$MsolCompanyInformationID"
# establish the trust from on-premise with ACS (Azure Control Service)
# add a new authenticatio realm
$SPSite = Get-SPSite $SPSite
$SPAppPrincipal = Register-SPAppPrincipal -site $SPSite.rootweb -nameIdentifier $MsolNameIdentifier -displayName "SharePoint Online"
Set-SPAuthenticationRealm -realm $MsolServicePrincipalID
# register the ACS application proxy and token issuer
New-SPAzureAccessControlServiceApplicationProxy -Name "ACS" -MetadataServiceEndpointUri "https://accounts.accesscontrol.windows.net/metadata/json/1/" -DefaultProxyGroup
New-SPTrustedSecurityTokenIssuer -MetadataEndpoint "https://accounts.accesscontrol.windows.net/metadata/json/1/" -IsTrustBroker -Name "ACS"
Add a new result source
To get search results from SharePoint Online we have to add a new result source. Run the following script in a PowerShell ISE session on your SharePoint 2013 on-premise server. Don't forget to update the settings region
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# region settings
$RemoteSharePointUrl = "http://[example].sharepoint.com"
$ResultSourceName = "SharePoint Online"
$QueryTransform = "{searchTerms}"
$Provier = "SharePoint-Remoteanbieter"
# region settings end
$SPEnterpriseSearchServiceApplication = Get-SPEnterpriseSearchServiceApplication
$FederationManager = New-Object Microsoft.Office.Server.Search.Administration.Query.FederationManager($SPEnterpriseSearchServiceApplication)
$SPEnterpriseSearchOwner = Get-SPEnterpriseSearchOwner -Level Ssa
$ResultSource = $FederationManager.GetSourceByName($ResultSourceName, $SPEnterpriseSearchOwner)
if(!$ResultSource){
Write-Host "Result source does not exist. Creating..."
$ResultSource = $FederationManager.CreateSource($SPEnterpriseSearchOwner)
$ResultSource.Name = $ResultSourceName
$ResultSource.ProviderId = $FederationManager.ListProviders()[$Provier].Id
$ResultSource.ConnectionUrlTemplate = $RemoteSharePointUrl
$ResultSource.CreateQueryTransform($QueryTransform)
$ResultSource.Commit()
Add a new query rule
In the Search Administration click on Query Rules
Select Local SharePoint as Result Source
Click New Query Rule
Enter a Rule name f.g. Search results from SharePoint Online
Expand the Context section
Under Query is performed on these sources click on Add Source
Select your SharePoint Online result source
In the Query Conditions section click on Remove Condition
In the Actions section click on Add Result Block
As title enter Results for "{subjectTerms}" from SharePoint Online
In the Search this Source dropdown select your SharePoint Online result source
Select 3 in the Items dropdown
Expand the Settings section and select "More" link goes to the following URL
In the box below enter this Url https://[example].sharepoint.com/search/pages/results.aspx?k={subjectTerms}
Select This block is always shown above core results and click the OK button
Save the new query rule

Hi Janik,
According to your description, my understanding is that you want to display hybrid search results in SharePoint Server 2013.
For achieving your demand, please have a look at the article:
http://technet.microsoft.com/en-us/library/dn197173(v=office.15).aspx
If you are using single sign-on (SSO) authentication, it is important to test hybrid Search functionality by using federated user accounts. Native Office 365 user accounts and Active Directory Domain Services
(AD DS) accounts that are not federated are not recognized by both directory services. Therefore, they cannot authenticate using SSO, and cannot be granted permissions to resources in both deployments. For more information, see Accounts
needed for hybrid configuration and testing.
Best Regards,
Eric
Eric Tao
TechNet Community Support

My Google preferences are set to show search results in a new window. However, when I do a Google search, it Firefox always opens 2 new windows with the (same) results. How can I fix this?

I did not change my Google settings. I always have had it set to open search results in a new window. Some time ago, it started opening up two windows that have identical url/content.

That issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Clicking a search result from search bar goole seaech, always opening google home page but only can open search in new tab by middle click,really frustrating.

Whenever i am clicking search result from Google search bar, it always opens the Google home page. I can only open search result in new tab by double clicking. It started when i installed Firefox 12.

@mstm, please ensure that you write some thing in search bar before you click search icon. without entering anything will redirect to google.com. And make sure that you are clicking on search icon not home icon.

Search results open a new window

Hi,
I am using SES 10.1.8.3.
By default, the search results open a new window.
# configure whether search results open in a new window
ses.qapp.results.new_window=true
But, i want only the documents (doc,pdf...etc) only open a new window. The pages are no need open a new window. Is it possible? How will do this?
Thanks!

Hi,
You can modify the XSLT to achieve the result.
In that file check for the file types and decide to open it in a new window or not.
Regards
parker.

Cannot open Google search results in tab\same window\new window

Google search results are not opening in the new tab\same window\new window. 
It is happening only in Firefox, Internet explorer. It is working fine in chrome. 
I have tried many solutions like 
1. cleared cache, history,everything from browser's, still no result. 
2. opened in safe mode, no result. 
3. unchecked hardware acceleration, still no result. 
4. Other search engines it is working fine, only problem with Google search engine. 
5. Tried changing my DNS (Google open DNS, others), no result. 
6. Checked with antivirus blocking, nothing is blocking. 
7. Reinstalled browsers(Firefox, explorer) no result. 
8. Tried with different versions of browsers, including the latest updates ( Firefox,explorer), no result. 
9. while disabling Java in about:config it is working in Firefox. 
Please help me on this issue. 
Thanks in advance.

Google normally routs the result link to their safe browsing testing service via an onmousedown event that modifies the link (href attribute) if you click it once.
You can check if this bookmarklet makes a difference:
<pre><nowiki>javascript:(function(){var e=document.querySelectorAll('#search a[onmousedown]'),E,i;for(i=0;E=e[i];i++){E.removeAttribute('onmousedown')}})()</nowiki></pre>
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Search Results in the Same Window..as we have in SDN

Hello Gurus,
I want the search results to be displayed exactly like we have in SDN. I mean search result should be displayed in the same window rather than opening a new window. Also when click on a document that document should open in the same window.
Please help in this.
V

Hello, we want to implement this functionality as well.
We are on Portal 6.0 SP15.
Ive already modified the ToolAreaIview.jsp to right align the search input box and redeployed the portal archive as a new portal archive to our system. Ive created a new iview off this portal archive and the search box is right aligned. Works great.
Now we want the search results to appear in the content area iframe? in the same manner as the search results at SDN. I followed the instructions as kindly outlined by Vaibhav. I removed the old var searchURL= and window.open code. My Toolareaivew.jsp now contains this in the function openSearch():
var searchURL= "http://"location.hostname":50000""<%=url%>" QueryString;
EPCM.raiseEvent('urn:com.ourcompany','searchResult', searchURL );
I redeployed the par file to the portal and created a new search iview based on this code.
I can see the javascript modifications in my browser when I go to view -> source.
I can event take the variable searchURL thats displayed in the source and paste it into my browser and the URL seems to be correct. I then modified the com.sap.portal.navigation.contentarea.par -> workarea.jsp and put in this code:
// Search Result set
function handle_searchResult_Event( eventObj ) {
self.location.href = eventObj.dataObject;
EPCM.subscribeEvent('urn:com.ourcompany','searchResult', handle_searchResult_Event);
I saved the par file with the same sap name com.sap.portal.navigation.contentarea.par and redeployed it to the portal. Now when I search on this newly created iview, it appears this event is not being raised as nothing happens. I have further read that I may want to rename the .jsp from workarea.jsp to something else. So I saved workarea.jsp as workarea_new.jsp and redeployed the par file. Still nothing happens during the search. I have even stopped /restarted the portal but still no luck.
Could anyone provide any hints at what I might be doing wrong?
Thanks in advance.

How do I display search results in a new window?

Our current search feature (http://mainedreamvacation.businesscatalyst.com/business-search) displays the search results in the same page. When someone clicks to see the details page, the goes "back" the browser displays an alert asking the user if they want to re-submit the form.
Is there a way for the search results to display in a new window? My hope is that by loading results into a new window, a user could click to see the detail, then return without the alert message.
I'm open to simply suppressing the alert message, but I don't think that's possible.
I should point out that this is NOT a site search. Also, I have tried {module_webappsresults,,_blank} without success.
Thanks!

Hi Tim,
The approach would be similar to customizing this for normal site search.
You'll need to locate the page where you inserted the web app search access the html and locate the pageID in the form action. Use the same method found in the site search to apply the specific page.
- http://helpx.adobe.com/business-catalyst/partner/add-search-form.html> Point to the results page
**Ensure you please the {module_webappsresults} on the custom page to have the content display as well.
Kind regards,
-Sidney

Search Result in a new window

Hi all,
I created a Search iView and all results are displayed underneath the search box.
Is it possible to get the results displayed in a new window? I couldn´t find a setting in the Search Component Set or the Search Options Set.
Thx and Rgds,
Andreas

Hi Benjamin,
I already have a working KM Basic Search iView in my content area. The Search Results are displayed underneath the search box and is working as designd.
But I tried to implement another Search iView on another page in the portal and there I wanted the search results displayed in an external window. So I tried it with the ToolArea iView, but no success.
Maybe this is because of our modified default framework page.
Cheers,
Andreas

Display Search Results of Content Search WebPart in a Calendar Style

Hi,
I have currently the requirement to gather events from calendars (event list) that are spread among dozens of site collections. Calendar rollup or overlay only works within a sitecollection (right?).
I thought that I might be able to use the Content Search WebPart for this task. Is it possible to create displaytemplates that transform the search results into a calendar like view?
Thanks
Sven

Hi Sven,
As I tested, I can overlay SharePoint calendars across site collections in the same web application. However, by design it doesn't work across web applications.
I'd like to confirm if you are overlaying calendars across site collections or web applications. If your situation is the former, did you recieve any error message?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

Push MDM search results from webdynpro to portal's standard ResultSet iView

Hi,
I have gone thru a lot of SDN information, blogs and PDFs
regarding the usage of EPCF, EPCM for communication between
Webdynpro and Portal utlizing portal eventing phenomenon.
My requirement a.k.a. predicament and grief::
I get back mdm search results in webdynpro app, using a
specialized search strategy to MDM repository. I need to
ship these resuls off to the standard out-of-box
portal's MDM ResultSet iView (which is a part of portal's
MDM business package).
I haven't had much success getting crisp resolution to
satisfy my requirements. In my WD code, I know, I need
to put some sort of ?event-generating-2-liner-code? that
sends my results to portal's standard iView.
Surely, I can send just recordIDs or I can send the actual
results. I get 5 fields per record of Material's table.
Once the ResultSet-iView displays the search results,
my responsibility is over. Now onwards, portal's standard
business package will take over from there for further user
interacitons, like accessing item details etc..etc..
Any and all help is highly appreciated.
-Shashank Date

No replies............yet.....It's been 2 days now.....
Can someone provide some clues?
thx.
-Shashank Date

Problem in Flex to get XML result from web services

Hi all
I am struggling a proplem for a whole day, i hope somebody can help.
I am trying to get the list file of files located on the server, so i use flex to access a ASP.NET ASMX web services, that returns all the file names in a folder.
I can see that web servicese worked perfectly, however when i try to get the result from flex, i could not figure out how to get the real data i wantted
public function LoadImage(e:ResultEvent):void{
imageList.dataProvider = e.result;
the e.result has some addtional tags, such as
<GetImageFileListResponse xmlns="http://tempuri.org/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<GetImageFileListResult>
 <images>
 <image>01417_ccurve_1280x1024.jpg</image>
 <image>1915619295407381096.png</image>
 <image>21051802471898733113.png</image>
where GetImageFileList is the operation name used in web service
I am only interested in the data starting from <images> . I don't know why the addtioanl tag has been added.
here is the code i have used in flex.
<mx:WebService
wsdl="http://localhost/Flex/GetImageFiles.asmx?WSDL" id="imageWs">
<mx:operation name="GetImageFileList" result="LoadImage(event)" fault="mx.controls.Alert.show(event.fault.faultString)" resultFormat="
e4x">
</mx:operation>
</mx:WebService>
Thanks in advance!!!

Hi,
Just replace the below line in your code and check...
imageList.dataProvider = e.result.GetImageFileListResult.images;
If this post answers your question or helps, please mark it as such.
Thanks,
Bhasker Chari

Searching paragraphs using automator and deleting the search results from the original body of text

How do I search paragraphs of a text document using automator and then have the search results deleted from the text document after those search results are exported to a textedit document?

How do I search paragraphs of a text document using automator and then have the search results deleted from the text document after those search results are exported to a textedit document?

How to display search results in content area

Hi
How can I display search results in the content area as seen in sdn.
Thanks in advance.

Hi,
http://help.sap.com/saphelp_nw70/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm you find the relevant guidelines.
You can filter the PCD object setting the Search Layout Set of your Searc Iview.
In System Admin > System Configuration > Content Management > User Interface > Settings > Layout Set and duplicate the "SearchResultLayoutSet" layout set.
Then you have to duplicate its Collection Renderer "StandardSearchResultRenderer".
In its property "Resource Types to be Filtered" set as value "-http://sap.com/xmlns/pcd/app/iview".
Then assign the new Collection Renderer to the new Layout Set and that's it!
Now if yuor Search Iview uses this new Layout Set, when you search a PCD object the iviews will not be shown!
(or)
In the entry "Predefined Properties" of the search options set, you will need to enter "resourcetype(value=http://sap.com/xmlns/pcd/app/page/default)" if you want the search to be limited to resources defined as pages. Leave out /default if you dont want the end user to be able to change the filter.
If you want the parameter reflected in the URL, you can find information about how to do it here: /message/280371#280371 [original link is broken]
Check and try either ways.
Regards,
Ponneswari A.

Clear search results from Content Services Windows Crawl 6.1

Similar Messages

Maybe you are looking for